A Novel Application of MgO Nano-cutting Fluid in Hardened AISI D2 Steel Machining Using a Chemical Vapor Deposition-Coated Carbide Tool
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. C.S. Kumar and S.K. Patel, Application of Surface Modification Techniques During Hard Turning: Present Work and Future Prospects, Int. J. Refract. Metals Hard Mater., 2018, 76, p 112–127.10.1016/j.ijrmhm.2018.06.003 ↗
2. N.A. Özbek, O. Özbek, F. Kara, and H. Saruhan, Effect of Eco-friendly Minimum Quantity Lubrication in Hard Machining of Vanadis 10: A High Strength Steel, Steel Res. Int., 2022, 93(7), p 2100587.10.1002/srin.202100587 ↗
3. O. Özbek, N.A. Özbek, F. Kara, and H. Saruhan, Effect of Vibration and Cutting Zone Temperature on Surface Topography During Hybrid Cooling/Lubrication Assisted Machining of Vanadis 10, Mater. Test., 2023, 65(9), p 1437–1452.10.1515/mt-2023-0057 ↗
4. S.U.S. Choi and J.A. Eastman, Enhancing Thermal Conductivity of Fluids with Nanoparticles, Argonne National Lab. (ANL), Argonne, IL, USA, 1995.10.1115/IMECE1995-0926 ↗
5. A.K. Sharma, A.K. Tiwari, and A.R. Dixit, Progress of Nanofluid Application in Machining: A Review, Mater. Manuf. Process., 2015, 30, p 813–828. https://doi.org/10.1080/10426914.2014.97358310.1080/10426914.2014.973583 ↗
6. A.A. Permanasari, B.S. Kuncara, P. Puspitasari, S. Sukarni, T.L. Ginta, and W. Irdianto, Convective Heat Transfer Characteristics of TiO2-EG Nanofluid as Coolant Fluid in Heat Exchanger, AIP Conf. Proc., 2019, 2120, p 050015. https://doi.org/10.1063/1.511569110.1063/1.5115691 ↗
7. K.Z. Yang, A. Pramanik, A.K. Basak, Y. Dong, C. Prakash, S. Shankar, S. Dixit, K. Kumar, and N.I. Vatin, Application of Coolants During Tool-Based Machining—A Review, Ain Shams Eng. J., 2023, 14(1), p 101830. https://doi.org/10.1016/j.asej.2022.10183010.1016/j.asej.2022.101830 ↗
8. A.N.M. Khalil, M.A.M. Ali, and A.I. Azmi, Effect of Al2O3 Nanolubricant with SDBS on Tool Wear During Turning Process of AISI 1050 with Minimal Quantity Lubricant, Procedia Manuf., 2015, 2, p 130–134. https://doi.org/10.1016/j.promfg.2015.07.02310.1016/j.promfg.2015.07.023 ↗
9. M. Khajehzadeh, J. Moradpour, and M.R. Razfar, Influence of Nanolubricant Particles Size on Flank Wear in Hard Turning, Mater. Manuf. Process., 2019, 34(5), p 494–501. https://doi.org/10.1080/10426914.2019.156661910.1080/10426914.2019.1566619 ↗
10. A. Das, S.R. Das, S.K. Patel, and B.B. Biswal, Effect of MQL and Nanofluid on the Machinability Aspects of Hardened Alloy Steel, Mach. Sci. Technol., 2020, 24(2), p 291–320. https://doi.org/10.1080/10910344.2019.166916710.1080/10910344.2019.1669167 ↗
11. T. Singh, Parametric Optimization to Establish Eco-friendly Nanofluid Minimum Quantity Lubrication (NMQL) Practice for Turning Superalloy Inconel 718, Ind. Lub. Tribol., 2024, 76(2), p 285–298. https://doi.org/10.1108/ILT-10-2023-031710.1108/ILT-10-2023-0317 ↗
12. M.F.B. Abdollah, H. Amiruddin, and A.D. Jamallulil, Experimental Analysis of Tribological Performance of Palm Oil Blended with Hexagonal Boron Nitride Nanoparticles as an Environment-Friendly Lubricant, Int. J. Adv. Manuf. Technol., 2020, 106, p 4183–4191. https://doi.org/10.1007/s00170-019-04906-510.1007/s00170-019-04906-5 ↗
13. T. Singh, C.D. Singh, and R. Singh, A Review on Minimum Quantity Lubrication (MQL) Assisted Machining Processes Using Mono and Hybrid Nanofluids, Ind. Lub. Tribol., 2023, 75(9), p 1054–1076. https://doi.org/10.1108/ILT-05-2023-013110.1108/ILT-05-2023-0131 ↗
14. E. Usluer, U. Emiroğlu, Y.F. Yapan, G. Kshitij, N. Khanna, M. Sarıkaya, and A. Uysal, Investigation on the Effect of Hybrid Nanofluid in MQL Condition in Orthogonal Turning and a Sustainability Assessment, Sustain. Mater. Technol., 2023, 36, p e00618. https://doi.org/10.1016/j.susmat.2023.e0061810.1016/j.susmat.2023.e00618 ↗
15. M.E. Korkmaz, M.K. Gupta, N.S. Ross, and V. Sivalingam, Implementation of Green Cooling/Lubrication Strategies in Metal Cutting Industries: A State of the Art Towards Sustainable Future and Challenges, Sustain. Mater. Technol., 2023, 36, p e00641. https://doi.org/10.1016/j.susmat.2023.e0064110.1016/j.susmat.2023.e00641 ↗
16. S.F. Altaf, M.A. Parray, M.J. Khan, M.F. Wani, and F.A. Bhat, Machining with Minimum Quantity Lubrication and Nano-fluid MQL: A Review, Tribol. Online, 2024, 19(3), p 209–217. https://doi.org/10.2474/trol.19.20910.2474/trol.19.209 ↗
17. N. Saravanakumar, L. Prabu, M. Karthik, and A. Rajamanickam, Experimental Analysis on Cutting Fluid Dispersed with Silver Nano Particles, J. Mech. Sci. Technol., 2014, 28, p 645–651. https://doi.org/10.1007/s12206-013-1192-610.1007/s12206-013-1192-6 ↗
18. T.M. Duc, T.T. Long, and T.Q. Chien, Performance Evaluation of MQL Parameters using Al2O3 and MoS2 Nanofluids in Hard Turning 90CrSi Steel, Lubricants, 2019, 7(5), p 40. https://doi.org/10.3390/lubricants705004010.3390/lubricants7050040 ↗
19. M.S. Khan, M.S. Sisodia, S. Gupta, M. Feroskhan, S. Kannan, and K. Krishnasamy, Measurement of Tribological Properties of Cu and Ag Blended Coconut Oil Nanofluids for Metal Cutting, Eng. Sci. Technol. Int. J., 2019, 22(6), p 1187–1192. https://doi.org/10.1016/j.jestch.2019.04.00510.1016/j.jestch.2019.04.005 ↗
20. Z. Duan, Q. Yin, C. Li, L. Dong, X. Bai, Y. Zhang, M. Yang, D. Jia, R. Li, and Z. Liu, Milling Force and Surface Morphology of 45 Steel Under Different Al2O3 Nanofluid Concentrations, Int. J. Adv. Manuf. Technol., 2020, 107, p 1277–1296. https://doi.org/10.1007/s00170-020-04969-910.1007/s00170-020-04969-9 ↗
21. N.A. Sristi, P.B. Zaman, and N.R. Dhar, Multi-response Optimization of Hard Turning Parameters: A Comparison Between Different Hybrid Taguchi-Based MCDM Methods, Int. J. Interact. Design Manuf. (IJIDeM), 2022, 16(4), p 1779–1795.10.1007/s12008-022-00849-6 ↗
22. M. Varatharajulu, M. Duraiselvam, M.B. Kumar, G. Jayaprakash, and N. Baskar, Multi Criteria Decision Making Through TOPSIS and COPRAS on Drilling Parameters of Magnesium AZ91, J. Magnes. Alloys, 2022, 10(10), p 2857–2874.10.1016/j.jma.2021.05.006 ↗
23. S.B. Patil, T.A. Patole, R.S. Jadhav, S.S. Suryawanshi, and S.J. Raykar, Complex Proportional Assessment (COPRAS) Based Multiple-Criteria Decision Making (MCDM) Paradigm for Hard Turning Process Parameters, Mater. Today Proceed., 2022, 59, p 835–840.10.1016/j.matpr.2022.01.142 ↗
24. S. Manikandan and K.S. Rajan, Rapid Synthesis of MgO Nanoparticles & Their Utilization for Formulation of a Propylene Glycol Based Nanofluid with Superior Transport Properties, RSC Adv., 2014, 4(93), p 51830–51837.10.1039/C4RA09173F ↗
25. H.K. Judran, A.G.T. Al-Hasnawi, F.N. Al. Zubaidi, W.A.K. Al-Maliki, F. Alobaid, and B. Epple, High Thermal Conductivity of MgO-H2O Nanofluid Prepared by Two-Step Technique, Appl. Sci., 2022, 12(5), p 2655. https://doi.org/10.3390/app1205265510.3390/app12052655 ↗
26. R. Kumar, A.K. Sahoo, P.C. Mishra, and R.K. Das, Influence of Al2O3 and TiO2 Nanofluid on Hard Turning Performance, Int. J. Adv. Manuf. Technol., 2020, 106, p 2265–2280. https://doi.org/10.1007/s00170-019-04754-310.1007/s00170-019-04754-3 ↗
27. S. Su, L. Gong, B. Li, Z. Liu, and D. Chen, Performance Evaluation of Nanofluid MQL with Vegetable-Based Oil and Ester Oil as Base Fluids in Turning, Int. J. Adv. Manuf. Technol., 2016, 83, p 2083–2089. https://doi.org/10.1007/s00170-015-7730-x10.1007/s00170-015-7730-x ↗
28. H.W. Chiam, W.H. Azmi, N.A. Usri, R. Mamat, and N.M. Adam, Thermal Conductivity and Viscosity of Al2O3 Nanofluids for Different Based Ratio of Water and Ethylene Glycol Mixture, Exp. Therm. Fluid Sci., 2017, 81, p 420–429. https://doi.org/10.1016/j.expthermflusci.2016.09.01310.1016/j.expthermflusci.2016.09.013 ↗
29. W. Yu and H. Xie, A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications, J. Nanomat., 2012, 1, p 1–17. https://doi.org/10.1155/2012/43587310.1155/2012/435873 ↗
30. N. Ali, J.A. Teixeira, and A. Addali, New pH Correlations for Stainless Steel 316L, Alumina, and Copper (I) Oxide Nanofluids Fabricated at Controlled Sonication Temperatures, J. Nano Res., 2019, 58, p 125–138. https://doi.org/10.4028/www.scientific.net/JNanoR.58.12510.4028/www.scientific.net/JNanoR.58.125 ↗
31. J. Wang, X. Yang, J.J. Klemeš, K.T. Tian, Ma, and B. Sunden, A Review on Nanofluid Stability: Preparation and Application, Renew. Sustain. Energy Rev., 2023, 188, p 113854. https://doi.org/10.1016/j.rser.2023.11385410.1016/j.rser.2023.113854 ↗
32. W. Safiei, M.M. Rahman, A.R. Yusoff, and M.R. Radin, Preparation, Stability and Wettability of Nanofluid: A review, J. Mech. Eng. Sci., 2020, 14(3), p 7244–7257. https://doi.org/10.15282/jmes.14.3.2020.24.056910.15282/jmes.14.3.2020.24.0569 ↗
33. H. Zhang, J. Hu, J. Xie, S. Wang, and Y. Cao, A Solid-State Chemical Method for synthesizing MgO Nanoparticles with Superior Adsorption Properties, RSC Adv., 2019, 9(4), p 2011–2017. https://doi.org/10.1039/C8RA09199D10.1039/C8RA09199D ↗
34. M. Hazza, The Economic Impact of Using Negative Rake Angle in High Speed Hard Turning, J. Adv. Sci. Eng. Res., 2013, 3(3), p 309–317.
35. S. Belhadi, T. Mabrouki, J.F. Rigal, and L. Boulanouar, Experimental and Numerical Study of Chip Formation During Straight Turning of Hardened AISI 4340 Steel, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2005, 219(7), p 515–524. https://doi.org/10.1243/095440505X3244510.1243/095440505X32445 ↗
36. R. Kumar, A.K. Sahoo, P.C. Mishra, and R.K. Das, Comparative Investigation Towards Machinability Improvement in Hard Turning Using Coated and Uncoated Carbide Inserts: Part I Experimental Investigation, Adv. Manuf., 2018, 6, p 52–70. https://doi.org/10.1007/s40436-018-0215-z10.1007/s40436-018-0215-z ↗
37. S.M. Alves, B.S. Barros, M.F. Trajano, K.S.B. Ribeiro, and E.J.T.I. Moura, Tribological Behavior of Vegetable Oil-Based Lubricants with Nanoparticles of Oxides in Boundary Lubrication Conditions, Tribol. Int., 2013, 65, p 28–36. https://doi.org/10.1016/j.triboint.2013.03.02710.1016/j.triboint.2013.03.027 ↗
38. R. Anand, A. Raina, M. Irfan Ul Haq, M.J. Mir, O. Gulzar, and M.F. Wani, Synergism of TiO2 and Graphene as Nano-Additives in Bio-based Cutting Fluid—An Experimental Investigation, Tribol. Trans., 2021, 64(2), p 350–366. https://doi.org/10.1080/10402004.2020.184295310.1080/10402004.2020.1842953 ↗
39. H.A. Kishawy and M.A. Elbestawi, Effects of Process Parameters on Material Side Flow During Hard Turning, Int. J. Mach. Tools Manuf, 1999, 39, p 1017–1030. https://doi.org/10.1016/S0890-6955(98)00084-410.1016/S0890-6955(98)00084-4 ↗
40. A.I. Fernández-Abia, J. Barreiro, L.N. López de Lacalle, and S. Martínez, Effect of Very High Cutting Speeds on Shearing, Cutting Forces and Roughness in Dry Turning of Austenitic Stainless Steels, Int. J. Adv. Manuf. Technol., 2011, 57, p 61–71. https://doi.org/10.1007/s00170-011-3267-910.1007/s00170-011-3267-9 ↗
41. A. Şahinoğlu, Investigation of the Effects of MQL and Material Hardness on Energy Consumption, Vibration, and Surface Roughness in Hard Turning of AISI 52100 Steel for a Sustainable Manufacturing. Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng., 2023, p 09544089231173257.10.1177/09544089231173257 ↗
42. M. Sarıkaya, Ş Şirin, Ç.V. Yıldırım, T. Kıvak, and M.K. Gupta, Performance Evaluation of Whisker-Reinforced Ceramic Tools Under Nano-sized Solid Lubricants Assisted MQL Turning of Co-based Haynes 25 Superalloy, Ceram. Int., 2021, 47(11), p 15542–15560. https://doi.org/10.1016/j.ceramint.2021.02.12210.1016/j.ceramint.2021.02.122 ↗
43. Anurag, R. Kumar, A.K. Sahoo, and A. Panda, Comparative Performance Analysis of Coated Carbide Insert in Turning of Ti-6Al-4V ELI Grade Alloy Under Dry, Minimum Quantity Lubrication and Spray Impingement Cooling Environments, J. Mater. Eng. Perform., 2022, 31, p 709–732. https://doi.org/10.1007/s11665-021-06183-410.1007/s11665-021-06183-4 ↗
44. F. Kara, N. Bulan, M. Akgün, and U. Köklü, Multi-objective Optimization of Process Parameters in Milling of 17–4 PH Stainless Steel Using Taguchi-Based Gray Relational Analysis, Eng. Sci., 2023, 26, p 961. https://doi.org/10.30919/es96110.30919/es961 ↗
45. A. Chu, C. Li, Z. Zhou, B. Liu, Y. Zhang, and M. Yang, Nanofluids Minimal Quantity Lubrication Machining: From Mechanisms to Application, Lubricants, 2023, 11(10), p 422.10.3390/lubricants11100422 ↗
46. W. Yu, H. Xie, and L.H. Liu, A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications, J. Manuf. Process., 2012 https://doi.org/10.1155/2012/43587310.1155/2012/435873 ↗
47. A. Yücel, Ç.V. Yıldırım, M. Sarıkaya, Ş Şirin, T. Kıvak, M.K. Gupta, and Í.V. Tomaz, Influence of MoS2 Based Nanofluid-MQL on Tribological and Machining Characteristics in Turning of AA 2024 T3 Aluminum Alloy, J. Mater. Res. Technol., 2021, 15, p 1688–1704.10.1016/j.jmrt.2021.09.007 ↗
48. P. Palanisamy, I. Rajendran, and S. Shanmugasundaram, Prediction of Tool Wear Using Regression and ANN Models in End-Milling Operation, Int. J. Adv. Manuf. Technol., 2009, 43, p 765–766.10.1007/s00170-008-1758-0 ↗
49. M. Usha and G.S. Rao, Machining Aspects of Al2O3 Nano Cutting Fluids—A Comparative Study, Tribol. Ind., 2022, 44(1), p 1–15.10.24874/ti.1032.12.20.03 ↗
50. M. Sayuti, A.A. Sarhan, and F. Salem, Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI 4140 for Less Tool Wear, Surface Roughness and Oil Consumption, J. Clean. Prod., 2014, 67, p 265–276. https://doi.org/10.1016/j.jclepro.2013.12.05210.1016/j.jclepro.2013.12.052 ↗
51. A. Singh, A. Thakur, and S. Gangopadhyay, Influence of MoS2-Based Nanofluid Minimum Quantity Lubrication on Machining Performance of AISI 316L Stainless Steel, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-024-09454-y10.1007/s11665-024-09454-y ↗
52. P.S. Ghosh, S. Chakraborty, A.R. Biswas, and N.K. Mandal, Empirical Modelling and Optimization of Temperature and Machine Vibration in CNC Hard Turning, Mater. Today Proc., 2018, 5(5), p 12394–12402.10.1016/j.matpr.2018.02.218 ↗
53. B. Savkovic, P. Kovac, B. Dudic, D. Rodic, M. Taric, and M. Gregus, Application of an Adaptive “Neuro-Fuzzy” Inference System in Modeling Cutting Temperature During Hard Turning, Appl. Sci., 2019, 9(18), p 3739.10.3390/app9183739 ↗
54. R. Nur, M.Y. Noordin, S. Izman, and D. Kurniawan, The Effect of Cutting Parameters on Power Consumption during Turning Nickel Based Alloy, Adv. Mater. Res., 2014, 845, p 799–802. https://doi.org/10.4028/www.scientific.net/AMR.845.79910.4028/www.scientific.net/AMR.845.799 ↗
55. G. Zhao, Y. Zhao, F. Meng, Q. Guo, and G. Zheng, Prediction Model of Machine Tool Energy Consumption in Hard-to-Process Materials Turning, Int. J. Adv. Manuf. Technol., 2020, 106, p 4499–4508.10.1007/s00170-020-04939-1 ↗
56. D. Ochengo, L. Liang, Z. Wei, and H. Ning, Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel, Adv. Mater. Sci. Eng., 2022, 2022, p 2675003.10.1155/2022/2675003 ↗
57. A. Şahinoğlu, Investigate Energy Efficiency, Cutting Force and Surface Roughness in Hard Turning of AISI S1 Steel for Sustainable Manufacturing, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2024, 238(7), p 2772–2781.10.1177/09544062231171993 ↗
58. A.M. Khan, M. Jamil, M. Mia, N. He, W. Zhao, and L. Gong, Sustainability-Based Performance Evaluation of Hybrid Nanofluid Assisted Machining, J. Clean. Prod., 2020, 257, p 120541. https://doi.org/10.1016/j.jclepro.2020.12054110.1016/j.jclepro.2020.120541 ↗
59. A.T. Abbas, S. Anwar, E. Abdelnasser, M. Luqman, J.E.A. Qudeiri, and A. Elkaseer, Effect of Different Cooling Strategies on Surface Quality and Power Consumption in Finishing End Milling of Stainless Steel 316, Materials, 2021, 14(4), p 903. https://doi.org/10.3390/ma1404090310.3390/ma14040903 ↗
60. A. Şahinoğlu, V. Rafighi, and R. Kumar, An Investigation on Cutting Sound Effect on Power Consumption and Surface Roughness in CBN Tool-Assisted Hard Turning, Proc. Inst. Mech. Eng. Part E J. Process Mech. Eng, 2022, 236(3), p 1096–1108. https://doi.org/10.1177/0954408921105802110.1177/09544089211058021 ↗
61. N.S. Ross, R. Rai, M.B.J. Ananth, D. Srinivasan, M. Ganesh, M.K. Gupta, and G.M. Królczyk, Carbon Emissions and Overall Sustainability Assessment in Eco-friendly Machining of Monel-400 alloy, Sustain. Mater. Technol., 2023, 37, p e00675. https://doi.org/10.1016/j.susmat.2023.e0067510.1016/j.susmat.2023.e00675 ↗