Exploring the Impact of Drilling Parameters on Damage Morphology and Strength of Carbon Fiber-Reinforced Plastic Laminates
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. O. Isbilir and E. Ghassemieh, Numerical Investigation of the Effects of Drill Geometry on Drilling-Induced Delamination of Carbon Fiber Reinforced Composites, Compos. Struct., 2013, 105, p 126–133.10.1016/j.compstruct.2013.04.026 ↗
2. R. Teti, Machining of Composite Materials, CIRP Ann., 2002, 51(2), p 611–634.10.1016/S0007-8506(07)61703-X ↗
3. A.M. Abrao, P.E. Faria, J.C. Rubio, P. Reis, and J.P. Davim, Drilling of Fiber Reinforced Plastics: A Review, J. Mater. Process. Technol., 2007, 186(1–3), p 1–7.10.1016/j.jmatprotec.2006.11.146 ↗
4. C.W. Wern, M. Ramulu, and A. Shukla, Investigation of Stresses in the Orthogonal Cutting of Fiber-Reinforced Plastics, Exp. Mech., 1996, 36, p 33–41.10.1007/BF02328695 ↗
5. G.V.G. Rao, P. Mahajan, and N. Bhatnagar, Micro-mechanical Modeling of Machining of FRP Composites—Cutting Force Analysis, Compos. Sci. Technol., 2007, 67(3–4), p 579–593.10.1016/j.compscitech.2006.08.010 ↗
6. E. Persson, I. Eriksson, and L. Zackrisson, Effects of Hole Machining Defects on Strength and Fatigue Life of Composite Laminates, Compos. A Appl. Sci. Manuf., 1997, 28(2), p 141–151.10.1016/S1359-835X(96)00106-6 ↗
7. R. Mishra, J. Malik, I. Singh, and J.P. Davim, Neural Network Approach for Estimating the Residual Tensile Strength After Drilling in Uni-Directional Glass Fiber Reinforced Plastic Laminates, Mater. Des., 2010, 31(6), p 2790–2795.10.1016/j.matdes.2010.01.011 ↗
8. J. Xu, Y. Yin, J.P. Davim, L. Li, M. Ji, N. Geier, and M. Chen, A Critical Review Addressing Drilling-Induced Damage of CFRP Composites, Compos. Struct., 2022, 294, p 115594.10.1016/j.compstruct.2022.115594 ↗
9. W.L. Lai, H. Saeedipour, and K.L. Goh, Experimental Assessment of Drilling-Induced Damage in Impacted Composite Laminates for Resin-Injection Repair: Influence of Open/Blind Hole–Hole Interaction and Orientation, Compos. Struct., 2021, 271, p 114153.10.1016/j.compstruct.2021.114153 ↗
10. J. Fernández-Pérez, J. Díaz-Álvarez, M.H. Miguélez, and J.L. Cantero, Combined Analysis of Wear Mechanisms and Delamination in CFRP Drilling, Compos. Struct., 2021, 255, p 112774.10.1016/j.compstruct.2020.112774 ↗
11. Y. Shi, X. Wang, F. Wang, T. Gu, P. Xie, and Y. Jia, Effects of Inkjet Printed Toughener on Delamination Suppression in Drilling of Carbon Fibre Reinforced Plastics (CFRPs), Compos. Struct., 2020, 245, p 112339.10.1016/j.compstruct.2020.112339 ↗
12. N. Feito, A. Muñoz-Sánchez, A. Díaz-Álvarez, and M.H. Miguelez, Multi-objective Optimization Analysis of Cutting Parameters When Drilling Composite Materials with Special Geometry Drills, Compos. Struct., 2019, 225, p 111187.10.1016/j.compstruct.2019.111187 ↗
13. A. Haeger, M. Grudenik, M.J. Hoffmann, and V. Knoblauch, Effect of Drilling-Induced Damage on the Open Hole Flexural Fatigue of Carbon/Epoxy Composites, Compos. Struct., 2019, 215, p 238–248.10.1016/j.compstruct.2019.02.025 ↗
14. J. Xu, C. Li, S. Mi, Q. An, and M. Chen, Study of Drilling-Induced Defects for CFRP Composites using New Criteria, Compos. Struct., 2018, 201, p 1076–1087.10.1016/j.compstruct.2018.06.051 ↗
15. D. Geng, Y. Liu, Z. Shao, Z. Lu, J. Cai, X. Li, X. Jiang, and D. Zhang, Delamination Formation, Evaluation and Suppression during Drilling of Composite Laminates: A Review, Compos. Struct., 2019, 216, p 168–186.10.1016/j.compstruct.2019.02.099 ↗
16. F. Su, Z. Deng, F. Sun, S. Li, Q. Wu, and X. Jiang, Comparative Analyses of Damages Formation Mechanisme for Novel Drills Based on a New Drill-Induced Damages Analytical Model, J. Mater. Process. Technol., 2019, 271, p 111–125.10.1016/j.jmatprotec.2019.03.033 ↗
17. C.C. Tsao and H. Hocheng, Computerized Tomography and C-Scan for Measuring Delamination in the Drilling of Composite Materials using Various Drills, Int. J. Mach. Tool Manuf., 2005, 45(11), p 1282–1287. https://doi.org/10.1016/j.ijmachtools.2005.01.00910.1016/j.ijmachtools.2005.01.009 ↗
18. X.Y. Qiu, P.N. Li, L.Y. Tang, C.P. Li, Q.L. Niu, S.J. Li, S.W. Tang, and T.J. Ko, Determination of the Optimal Feed Rate for Step Drill Bit Drilling CFRP Pipe Based on Exit Damage Analysis, J. Manuf. Process., 2022, 83, p 246–256.10.1016/j.jmapro.2022.09.002 ↗
19. V. Krishnaraj, A. Prabukarthi, A. Ramanathan, N. Elanghovan, M.S. Kumar, R. Zitoune, and J.P. Davim, Optimization of Machining Parameters at High Speed Drilling of Carbon Fiber Reinforced Plastic (CFRP) Laminates, Compos. B Eng., 2012, 43(4), p 1791–1799.10.1016/j.compositesb.2012.01.007 ↗
20. B.G. Green, M.R. Wisnom, and S.R. Hallett, An Experimental Investigation into the Tensile Strength Scaling of Notched Composites, Compos. A Appl. Sci. Manuf., 2007, 38, p 867–878.10.1016/j.compositesa.2006.07.008 ↗
21. M.R. Wisnom and S.R. Hallett, The Role of Delamination in Strength, Failure Mechanism and Hole Size Effect in Open Hole Tensile Tests on Quasi-Isotropic Laminates, Compos. A Appl. Sci. Manuf., 2009, 40, p 335–342.10.1016/j.compositesa.2008.12.013 ↗
22. L. Qin, Z. Zhang, Z. Feng, X. Li, Y. Wang, Y. Wang et al., Full-Field Analysis of Notch Effects of 3D Carbon/Carbon Composites, J. Mater. Sci., 2013, 48, p 3454–3460.10.1007/s10853-013-7135-x ↗
23. M.A. Caminero, M. Lopez-Pedrosa, C. Pinna, and C. Soutis, Damage Assessment of Composite Structures using Digital Image Correlation, Appl. Compos. Mater., 2014, 21, p 91–106.10.1007/s10443-013-9352-5 ↗
24. B. Aidi and S.W. Case, Experimental and Numerical Analysis of Notched Composites under Tension Loading, Appl. Compos. Mater., 2015, 22, p 837–855.10.1007/s10443-015-9439-2 ↗
25. N. Feito, J. Díaz-Álvarez, J. López-Puente, and M.H. Miguelez, Experimental and Numerical Analysis of Step Drill Bit Performance When Drilling Woven CFRPs, Compos. Struct., 2018, 184, p 1147–1155.10.1016/j.compstruct.2017.10.061 ↗
26. N. Shetty, S.M. Shahabaz, S.S. Sharma, and S.D. Shetty, A Review on Finite Element Method for Machining of Composite Materials, Compos. Struct., 2017, 176, p 790–802.10.1016/j.compstruct.2017.06.012 ↗
27. Z. Hashin, Fatigue Failure Criteria for Uni-directional Fiber Composites. Pennsylvania Univ Philadelphia Dept of Materials Science and Engineering, 1980.10.1115/1.3153664 ↗
28. A. Puck and H. Schürmann, Failure Analysis of FRP Laminates by Means of Physically Based Phenomenological Models, Compos. Sci. Technol., 2002, 62(12–13), p 1633–1662.10.1016/S0266-3538(01)00208-1 ↗
29. S.T. Pinho, C.G. Dávila, P.P. Camanho, L. Iannucci, and P. Robinson, Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity (No. NASA/TM-2005-213530), 2005.
30. S.T. Pinho, R. Darvizeh, P. Robinson, C. Schuecker, and P.P. Camanho, Material and Structural Response of Polymer-Matrix Fibre-Reinforced Composites, J. Compos. Mater., 2012, 46(19–20), p 2313–2341.10.1177/0021998312454478 ↗
31. V.A. Phadnis, F. Makhdum, A. Roy, and V.V. Silberschmidt, Drilling-Induced Damage in CFRP Laminates: Experimental and Numerical Analysis, Solid State Phenomena, Vol 188, V.A. Phadnis Ed., Trans Tech Publications Ltd., London, 2012, p 150–157
32. V.A. Phadnis, F. Makhdum, A. Roy, and V.V. Silberschmidt, Drilling in Carbon/Epoxy Composites: Experimental Investigations and Finite Element Implementation, Compos. A Appl. Sci. Manuf., 2013, 47, p 41–51.10.1016/j.compositesa.2012.11.020 ↗
33. K. Giasin, S. Ayvar-Soberanis, T. French, and V. Phadnis, 3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis, Appl. Compos. Mater., 2017, 24, p 113–137.10.1007/s10443-016-9517-0 ↗
34. N. Feito, J. López-Puente, C. Santiuste, and M.H. Miguélez, Numerical Prediction of Delamination in CFRP Drilling, Compos. Struct., 2014, 108, p 677–683.10.1016/j.compstruct.2013.10.014 ↗
35. O. Isbilir and E. Ghassemieh, Numerical Investigation of the Effects of Drill Geometry on Drilling Induced Delamination of Carbon Fiber Reinforced Composites, Compos. Struct., 2013, 105, p 126–133.10.1016/j.compstruct.2013.04.026 ↗
36. G.D. Wang and S.K. Melly, Three-Dimensional Finite Element Modeling of Drilling CFRP Composites using Abaqus/CAE: A Review, Int. J. Adv. Manuf. Technol., 2018, 94, p 599–614.10.1007/s00170-017-0754-7 ↗
37. M. Aamir, M. Tolouei-Rad, K. Giasin, and A. Nosrati, Recent Advances in Drilling of Carbon Fiber–Reinforced Polymers for Aerospace Applications: A Review, Int. J. Adv. Manuf. Technol., 2019, 105, p 2289–2308.10.1007/s00170-019-04348-z ↗
38. X. Wang, W. Li, Z. Guan, Z. Li, Y. Wang, M. Zhang, J. Bao, and S. Du, Clustering Effect on Mechanical Properties and Failure Mechanism of Open Hole High Modulus Carbon Fiber Reinforced Composite Laminates under Compression, Compos. Struct., 2019, 229, p 111377.10.1016/j.compstruct.2019.111377 ↗
39. D.K. Shin, H.C. Kim, and J.J. Lee, Numerical Analysis of the Damage Behavior of an Aluminum/CFRP Hybrid Beam under Three-Point Bending, Compos. B Eng., 2014, 56, p 397–407.10.1016/j.compositesb.2013.08.030 ↗
40. S.S. Rahimian Koloor, A. Karimzadeh, N. Yidris, M. Petrů, M.R. Ayatollahi, and M.N. Tamin, An Energy-Based Concept for Yielding of Multidirectional FRP Composite Structures using a Mesoscale Lamina Damage Model, Polymers, 2020, 12(1), p 157.10.3390/polym12010157 ↗
41. B. Ergene, C. Bolat, U. Karakilinc, and A.B. Irez, A comprehensive investigation of drilling performance of anisotropic stacked Glass-Carbon Fiber Reinforced Hybrid Laminate Composites, Polym. Compos., 2023, 44(5), p 2656–2670.10.1002/pc.27268 ↗
42. M. Li, X. Jiang, and T. Su, The Influence of Hole Quality on Mechanical Behavior and Strain Distribution of Open-Hole CFRP Laminates Subject to Different Machining Processes, Polym. Compos., 2022, 43(12), p 9218–9230.10.1002/pc.27099 ↗
43. V. Divse, D. Marla, and S.S. Joshi, 3D Progressive Damage Modeling of Fiber Reinforced Plastics Laminates Including Drilling-Induced Damage, Compos. A Appl. Sci. Manuf., 2022, 163, p 107230.10.1016/j.compositesa.2022.107230 ↗
44. Ç. Bolat, U. Karakılınç, B. Yalçın, Y. Öz, Ç. Yavaş, B. Ergene, A. Ercetin, and F. Akkoyun, Effect of Drilling Parameters and Tool Geometry on the Thrust Force and Surface Roughness of Aerospace Grade Laminate Composites, Micromachines, 2023, 14(7), p 1427.10.3390/mi14071427 ↗
45. J. Xu, N. Geier, J. Shen, V. Krishnaraj, and S. Samsudeensadham, A Review on CFRP Drilling: Fundamental Mechanisms, Damage Issues, and Approaches Toward High-Quality Drilling, J. Mater. Res. Technol., 2023, 24, p 9677–9707.10.1016/j.jmrt.2023.05.023 ↗
46. J. Xu, L. Li, N. Geier, J.P. Davim, and M. Chen, Experimental Study of Drilling Behaviors and Damage Issues for Woven GFRP Composites using Special Drills, J. Market. Res., 2022, 21, p 1256–1273.
47. J. Xu, A Review on Tool Wear Issues in Drilling CFRP laminates, Front. Mater., 2022, 9, p 990773.10.3389/fmats.2022.990773 ↗