Synergetic Effects of Macro- and Microscopic Residual Stresses Induced by High-Frequency Mechanical Impact Post-weld Treatment on Fatigue Strength Enhancement of S335 Steel T-Weld
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. L. Wagner, Mechanical Surface Treatments on Titanium, Aluminum and Magnesium Alloys, Mater. Sci. Eng. A, 1999, 263, p 210–216. https://doi.org/10.1016/S0921-5093(98)01168-X10.1016/S0921-5093(98)01168-X ↗
2. A.F. Hobbacher, Recommendations for Fatigue Design of Welded Joints and Components. IIW Collection, Springer, 2009.
3. L.M. Lobanov, V.I. Kirian, V.V. Knysh, and G.I. Prokopenko, Increasing Fatigue Resistance of Welded Joints in Metal Structures by High-frequency Mechanical Peening (Review), Paton Weld. J. C/C Avtomaticheskaia Svarka, 2006, 9, p 2–11. (in Russian)
4. T. Ummenhofer and I. Weich, REFRESH-Lebensdauerverlängerung bestehender und neuer geschweißter Stahlkonstruktionen (REFRESH Service Life Extension of Existing and New Welded Steel Structures), Stahlbau (Steel Constr.), 2006, 75, p 7. (in German)
5. H.C. Yildirim and G.B. Marquis, Overview of Fatigue Data for High Frequency Mechanical Impact Treated Welded Joints, Weld. World, 2012, 56, p 82–96. https://doi.org/10.1007/BF0332136810.1007/BF03321368 ↗
6. D.Q. Yin, D.P. Wang, H.Y. Jing, and L.X. Huo, The Effects of Ultrasonic Peening Treatment on the Ultra-Long Life Fatigue Behavior of Welded Joints, Mater. Des., 2010, 31, p 3299–3307. https://doi.org/10.1016/j.matdes.2010.02.00610.1016/j.matdes.2010.02.006 ↗
7. G.B. Marquis and Z. Barsoum, IIW Recommendations on High Frequency Mechanical Impact (HFMI) Treatment for Improving the Fatigue Strength of Welded Joints. in IIW recommendations for the HFMI Treatment (Springer, Singapore, 2016), p. 1–34. https://doi.org/10.1007/978-981-10-2504-410.1007/978-981-10-2504-4 ↗
8. X. Cheng, J.W. Fisher, H.J. Prask, T. Gnaupel-Herold, B.T. Yen, and S. Roy, Residual Stress Modification by Post-weld Treatment and its Beneficial Effect on Fatigue Strength of Welded Structures, Int. J. Fatigue, 2003, 25, p 1259–1269. https://doi.org/10.1016/j.ijfatigue.2003.08.02010.1016/j.ijfatigue.2003.08.020 ↗
9. M. Tsujikawa, M. Egawa, T. Sone, N. Ueda, T. Okano, and K. Higashi, Modification of S Phase on Austenitic Stainless Steel Using Fine Particle Shot Peening, Surf. Coat. Technol., 2013, 228, p 318–322. https://doi.org/10.1016/j.surfcoat.2012.05.11110.1016/j.surfcoat.2012.05.111 ↗
10. J. Lago, M. Guagliano, O. Bokůvka, L. Trško, O. Řidký, F. Nový, and D. Závodská, Improvement of Fatigue Endurance of Welded S355 J2 Structural Steel by Severe Shot Peening, Surf. Eng., 2017, 33, p 715–720. https://doi.org/10.1080/02670844.2017.127985810.1080/02670844.2017.1279858 ↗
11. J. Krawczyk, M. Bembenek, Ł Frocisz, T. Śleboda, and M. Paćko, The Effect of Sandblasting on Properties and Structures of the DC03/1.0347, DC04/1.0338, DC05/1.0312, and DD14/1.0389 Steels for Deep Drawing, Materials, 2021, 14(13), p 3540. https://doi.org/10.3390/ma1413354010.3390/ma14133540 ↗
12. C. Wang, C. Wang, L. Wang, Y. Lai, K. Li, and Y. Zhou, A Dislocation Density-Based Comparative Study of Grain Refinement, Residual Stresses, and Surface Roughness Induced by Shot Peening and Surface Mechanical Attrition Treatment, Int. J. Adv. Manuf. Technol., 2020, 108, p 505–525. https://doi.org/10.1007/s00170-020-05413-810.1007/s00170-020-05413-8 ↗
13. I. Nikitin and I. Altenberger, Comparison of the Fatigue Behavior and Residual Stress Stability Of Laser-Shock Peened and Deep Rolled Austenitic Stainless Steel AISI, 304 in the Temperature Range 25–600 °C, Mater. Sci. Eng. A, 2007, 465, p 176–182. https://doi.org/10.1016/j.msea.2007.02.00410.1016/j.msea.2007.02.004 ↗
14. D.A. Lesyk, H. Soyama, B.N. Mordyuk, V.V. Dzhemelinskyi, S. Martinez, N.I. Khripta, and A. Lamikiz, Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure, J. Mater. Eng. Perform., 2019, 28, p 5307–5322. https://doi.org/10.1007/s11665-019-04273-y10.1007/s11665-019-04273-y ↗
15. D.S. Bandla, P. Verma, K. Chattopadhyay, and V. Singh, Enhancement of Hot Corrosion Resistance of Modified 9Cr-1Mo Steel through Surface Nanostructuring and Pre-Oxidation, J. Mater. Eng. Perform., 2018, 27, p 6443–6457. https://doi.org/10.1007/s11665-018-3751-610.1007/s11665-018-3751-6 ↗
16. R. Karimbaev, Y.S. Pyun, E. Maleki, O. Unal, and A. Amanov, An Improvement in Fatigue Behavior of AISI 4340 Steel by Shot Peening and Ultrasonic Nanocrystal Surface Modification, Mater. Sci. Eng. A, 2020, 791, p 139752. https://doi.org/10.1016/j.msea.2020.13975210.1016/j.msea.2020.139752 ↗
17. Y. Duan, S.G. Qu, S. Jia, and X.Q. Li, Effects of Ultrasonic Surface Rolling Processing on Microstructure and Wear Properties of High-Carbon High-Chromium Steel, Surf. Coat. Technol., 2021, 422, p 127531. https://doi.org/10.1016/j.surfcoat.2021.12753110.1016/j.surfcoat.2021.127531 ↗
18. B.N. Mordyuk and G.I. Prokopenko, Ultrasonic Impact Treatment—An Effective Method for Nanostructuring the Surface Layers in Metallic Materials, ed by M. Aliofkhazraei. Handbook of Mechanical Nanostructuring (2015), p. 417–434. https://doi.org/10.1002/9783527674947.ch1710.1002/9783527674947.ch17 ↗
19. X. Yang, X. Ling, and J. Zhou, Optimization of the Fatigue Resistance of AISI304 Stainless Steel by Ultrasonic Impact Treatment, Int. J. Fatigue, 2014, 61, p 28–38. https://doi.org/10.1016/j.ijfatigue.2013.12.00310.1016/j.ijfatigue.2013.12.003 ↗
20. B.N. Mordyuk, G.I. Prokopenko, PYu. Volosevych, L.E. Matokhnyuk, A.V. Byalonovich, and T.V. Popova, Improved Fatigue Behavior of Low-Carbon Steel 20GL by Applying Ultrasonic Impact Treatment Combined with the Electric Discharge Surface Alloying, Mater. Sci. Eng. A, 2016, 659, p 119–129. https://doi.org/10.1016/j.msea.2016.02.03610.1016/j.msea.2016.02.036 ↗
21. D.A. Lesyk, B.N. Mordyuk, V.V. Dzhemelinskyi, S.M. Voloshko, and A.P. Burmak, Optimization of Ultrasonic Impact Treatment for Surface Finishing and Hardening of AISI O2 Tool Steel by Experimental Design, J. Mater. Eng. Perform., 2022, 31, p 8567–8584. https://doi.org/10.1007/s11665-022-06861-x10.1007/s11665-022-06861-x ↗
22. T. Suzuki, T. Okawa, H. Shimanuki, T. Nose, N. Ohta, H. Suzuki, and A. Moriai, Effect of Ultrasonic Impact Treatment (UIT) on Fatigue Strength of Welded Joints, Adv. Mater. Res.. Mater. Res., 2014, 996, p 736–742. https://doi.org/10.4028/www.scientific.net/AMR.996.73610.4028/www.scientific.net/AMR.996.736 ↗
23. V. Knysh, S. Solovei, S. Motrunich, L. Nyrkova, and H.C. Yıldırım, Influence of the Accelerated Corrosion Exposure on the Fatigue Behaviour of Welded Joints Treated by High Frequency Mechanical impact, Int. J. Fatigue, 2021, 149, p 106272. https://doi.org/10.1016/j.ijfatigue.2021.10627210.1016/j.ijfatigue.2021.106272 ↗
24. V.V. Knysh, S.A. Solovei, A.A. Kadyshev, L.I. Nyrkova, and S.A. Osadchuk, Influence of High-Frequency Peening on the Corrosion Fatigue of Welded Joints, Mater. Sci., 2017, 53, p 7–13. https://doi.org/10.1007/s11003-017-0036-410.1007/s11003-017-0036-4 ↗
25. V.V. Knysh, S.O. Solovei, L.I. Nyrkova, and S.A. Osadchuk, Influence of Marine Media on the Fatigue Strength of Butt-Welded Joints of 15KhSND Steel Hardened by High-Frequency Mechanical Impacts, Mater. Sci., 2020, 55, p 812–821. https://doi.org/10.1007/s11003-020-00374-510.1007/s11003-020-00374-5 ↗
26. B.N. Mordyuk and G.I. Prokopenko, Ultrasonic Impact Peening for the Surface Properties’ Management, J. Sound Vib., 2007, 308, p 855–866. https://doi.org/10.1016/j.jsv.2007.03.05410.1016/j.jsv.2007.03.054 ↗
27. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, M.O. Iefimov, and K.E. Grinkevych, Combining Laser Transformation Hardening and Ultrasonic Impact Strain Hardening for Enhanced Wear Resistance of AISI 1045 Steel, Wear, 2020, 462–463, p 203494. https://doi.org/10.1016/j.surfcoat.2020.12627510.1016/j.surfcoat.2020.126275 ↗
28. J. Schubnell, T. Hanji, K. Tateishi, S. Gkatzogiannis, T. Ummenhofer, and M. Farajian, Quantifying the Intensity of High-Frequency Mechanical Impact Treatment, IIW Commission XIII: Fatigue of Welded Components and Structures, Doc. XIII-2930-22
29. G.I. Prokopenko, B.M. Mordyuk, T.A. Krasovsky, V.V. Knish, and S.O. Solovey, Creation of Industrial Equipment for High Frequency Mechanical Impact on Railway Car Building Products and Methods for Assessing the Quality of Treatment, Sci. Innov., 2019, 15, p 25–37. https://doi.org/10.15407/scine15.02.02510.15407/scine15.02.025 ↗
30. W.B. Gao, D.P. Wang, F.J. Cheng, C.Y. Deng, Y. Liu, and W. Xu, Enhancement of the Fatigue Strength of Underwater Wet Welds by Grinding and Ultrasonic Impact Treatment, J. Mater. Proc. Technol., 2015, 223, p 305–312. https://doi.org/10.1016/j.jmatprotec.2015.04.01310.1016/j.jmatprotec.2015.04.013 ↗
31. S. Gkatzogiannis, Finite Element Simulation of Residual Stresses from Welding and High Frequency Hammer Peening, KIT Scientific Publishing, 2022. https://doi.org/10.5445/KSP/100012559110.5445/KSP/1000125591 ↗
32. M. Daavari and S.A. Sadough Vanini, Corrosion Fatigue Enhancement of Welded Steel Pipes by Ultrasonic Impact Treatment, Mater. Let., 2015, 139, p 462–466. https://doi.org/10.1016/j.matlet.2014.10.14110.1016/j.matlet.2014.10.141 ↗
33. B. Ahmad and M.E. Fitzpatrick, Effect of Ultrasonic Peening and Accelerated Corrosion Exposure on Residual Stress Distribution in Welded Marine Steel, Metall. Mater. Trans. A, 2015, 46, p 1214–1226. https://doi.org/10.1007/s11661-014-2713-310.1007/s11661-014-2713-3 ↗
34. H. Polezhaeva, D. Howarth, M. Kumar, B. Ahmad, and M.E. Fitzpatrick, The Effect of Compressive Fatigue Loads on Fatigue Strength of Non-load Carrying Specimens Subjected to Ultrasonic Impact Treatment, Weld. World., 2015, 59, p 713–721. https://doi.org/10.1007/s40194-015-0247-y10.1007/s40194-015-0247-y ↗
35. H. Al-Karawi, Material and Residual Stress Improvement in S355 Welded Structural Steel Using Mechanical and Thermal Post-weld Treatment Methods, Steel Constr., 2021, 14, p 1–4. https://doi.org/10.1002/stco.20210001210.1002/stco.202100012 ↗
36. H. Al-Karawi, R.U. Franz von Bock und Polach, and M. Al-Emrani, Fatigue Life Extension of Existing Welded Structures via High Frequency Mechanical Impact (HFMI) Treatment, Eng. Struct., 2021, 239, p 112234. https://doi.org/10.1016/j.engstruct.2021.11223410.1016/j.engstruct.2021.112234 ↗
37. J. Schubnell, E. Carl, M. Farajian, S. Gkatzogiannis, P. Knödel, T. Ummenhofer, R. Wimpory,and H. Eslami, Residual Stress Relaxation in HFMI-Treated Fillet Welds After Single Overload Peaks, Weld. World, 2020, 64, p 1107–1117. https://doi.org/10.1007/s40194-020-00902-610.1007/s40194-020-00902-6 ↗
38. C. Liu, D.J. Chen, M.R. Hill, M.N. Tran, and J.S. Zou, Effects of Ultrasonic Impact Treatment on Weld Microstructure, Hardness, and Residual Stress, Mater. Sci. Technol., 2017, 33, p 1601–1609. https://doi.org/10.1080/02670836.2017.129927710.1080/02670836.2017.1299277 ↗
39. V. Knysh, B. Mordyuk, S. Solovei, P. Volosevych, M. Skoryk, and D. Lesyk, Combining Electric Discharge Surface Alloying and High-Frequency Mechanic Impact Post-Processing for Increased Corrosion Fatigue Life of As-Welded Transverse Non-Load-Carrying Attachments of the S355 Steel, Int. J. Fatigue, 2023, 177, p 107926. https://doi.org/10.1016/j.ijfatigue.2023.10792610.1016/j.ijfatigue.2023.107926 ↗
40. P.Y. Volosevich and A.V. Shiyan, Stress Concentration and Strain Hardening in Structural Steel, Steel Transl., 2015, 45, p 460–465. https://doi.org/10.3103/S096709121506014510.3103/S0967091215060145 ↗
41. P. Volosevich and B. Mordyuk, Fatigue Failure as a Complex of Relaxation Processes Occurred at the Vertices of the Stress Risers, InterConf., 2021, 84, p 341–348. https://doi.org/10.51582/interconf.7-8.11.2021.03410.51582/interconf.7-8.11.2021.034 ↗
42. Q. Luo and A.H. Jones, High-Precision Determination of Residual Stress of Polycrystalline Coatings Using Optimised XRD-sin2ψ Technique, Surf. Coat. Technol., 2010, 205, p 1403–1408. https://doi.org/10.1016/j.surfcoat.2010.07.10810.1016/j.surfcoat.2010.07.108 ↗
43. L.L. Lyubimova, R.N. Fisenko, R.B. Tabakaev, A.A. Tashykov, and A.S. Zavorin, X-ray Investigation of a Heterogeneous Steel Weld, Mater. Sci. Eng. A, 2017, 682, p 248–254. https://doi.org/10.1016/j.msea.2016.11.05810.1016/j.msea.2016.11.058 ↗
44. E. Langi, L.G. Zhao, P. Jamshidi, M.M. Attallah, V.V. Silberschmidt, H. Willcock, and F. Vogt, Microstructural and Mechanical Characterization of Thin-Walled Tube Manufactured with Selective Laser Melting for Stent Application, J. Mater. Eng. Proc., 2021, 30, p 696–710. https://doi.org/10.1007/s11665-020-05366-910.1007/s11665-020-05366-9 ↗
45. D.A. Lesyk, B.N. Mordyuk, S. Martinez, M.O. Iefimov, V.V. Dzhemelinskyi, and A. Lamikiz, Influence of Combined Laser Heat Treatment and Ultrasonic Impact Treatment on Microstructure and Corrosion Behavior of AISI 1045 Steel, Surf. Coat. Technol., 2020, 401, p 126275. https://doi.org/10.1016/j.surfcoat.2020.12627510.1016/j.surfcoat.2020.126275 ↗
46. M. Ya, Y.M. Xing, F.L. Dai, K. Lu, and J. Lu, Study of Residual Stress in Surface Nanostructured AISI 316L Stainless Steel Using Two Mechanical Methods, Surf. Coat. Technol., 2003, 168, p 148–155. https://doi.org/10.1016/S0257-8972(03)00254-810.1016/S0257-8972(03)00254-8 ↗
47. L.M. Lobanov, N.A. Pashchin, O.L. Mikhodui, and J.A. Khokhlova, Investigation of Residual Stresses in Welded Joints of Heat-Resistant Magnesium Alloy ML10 After Electrodynamic Treatment, J. Magnes. Alloys, 2016, 4, p 77–82. https://doi.org/10.1016/j.jma.2016.04.00510.1016/j.jma.2016.04.005 ↗
48. R. Jones and C. Wykes, Holographic and Speckle Interferometry: A Discussion of the Theory, Practice and Application of the Techniques, Cambridge University Press, Cambridge, 1989.10.1017/CBO9780511622465 ↗
49. H. Bartsch, K. Drebenstedt, B. Seyfried, M. Feldmann, U. Kuhlmann, and T. Ummenhofer, Analysis of Fatigue Test Data to Reassess EN 1993–1-9 Detail Categories, Steel Constr., 2020, 13, p 280–289. https://doi.org/10.1002/stco.20200001910.1002/stco.202000019 ↗
50. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, Yu.V. Milman, and K.E. Grinkevych, Microstructure Related Enhancement in Wear Resistance of Tool Steel AISI D2 by Applying Laser Heat Treatment Followed by Ultrasonic Impact Treatment, Surf. Coat. Technol., 2017, 328, p 344–354. https://doi.org/10.1016/j.surfcoat.2017.08.04510.1016/j.surfcoat.2017.08.045 ↗
51. X.H. Zhao, M.G. Wang, Z.Q. Zhang, and Y. Liu, The Effect of Ultrasonic Peening Treatment on Fatigue Performance of Welded Joints, Materials, 2016, 9, p 471. https://doi.org/10.3390/ma906047110.3390/ma9060471 ↗
52. V.A. Kostin, V.V. Golovko, and G.M. Grigorenko, Methods for Assessment of Strengthening of HSLA Steel Weld Metal, Paton Weld. J., 2011, 10, p 9–14.
53. A.L. Ortiz, J.-W. Tian, L.L. Shaw, and P.K. Liaw, Experimental Study of the Microstructure and Stress State of Shot Peened and Surface Mechanical Attrition Treated Nickel Alloys, Scr. Mater., 2010, 62, p 129–132. https://doi.org/10.1016/j.scriptamat.2009.10.01510.1016/j.scriptamat.2009.10.015 ↗
54. M.A. Vasylyev, B.N. Mordyuk, S.I. Sidorenko, S.M. Voloshko, and A.P. Burmak, Influence of Microstructural Features and Deformation-Induced Martensite on Hardening of Stainless Steel by Cryogenic Ultrasonic Impact Treatment, Surf. Coat. Technol., 2018, 343, p 57–68. https://doi.org/10.1016/j.surfcoat.2017.11.01910.1016/j.surfcoat.2017.11.019 ↗
55. V.G. Gavriljuk, Decomposition of Cementite in Pearlitic Steel Due to Plastic Deformation, Mater. Sci. Eng. A, 2003, 345, p 81–89. https://doi.org/10.1016/S0921-5093(02)00358-110.1016/S0921-5093(02)00358-1 ↗
56. H. Mughrabi, H.W. Hoppel, and M. Kautz, Fatigue and Microstructure of Ultrafine-Grained Metals Produced by Severe Plastic Deformation, Scripta Mater., 2004, 51, p 807–812. https://doi.org/10.1016/j.scriptamat.2004.05.01210.1016/j.scriptamat.2004.05.012 ↗
57. L.M. Lobanov, V.A. Pivtorak, V.V. Savitsky, G.I. Tkachuk, and I.V. Kiyanets, Express Control of Quality and Stressed State of Welded Structures using Methods of Electron Shearography and Speckle-Interferometry, Paton Weld. J., 2005, 8, p 35–40.
58. Z. Barsoum and I. Barsoum, Residual Stress Effects on Fatigue Life of Welded Structures using LEFM, Eng. Fail. Anal., 2009, 16, p 449–467. https://doi.org/10.1016/j.engfailanal.2008.06.01710.1016/j.engfailanal.2008.06.017 ↗
59. P. Shams-Hakimi, F. Zamiria, M. Al-Emrania, and Z. Barsoum, Experimental Study of Transverse Attachment Joints with 40 and 60 mm Thick Main Plates, Improved by High-Frequency Mechanical Impact Treatment (HFMI), Eng. Struct., 2018, 155, p 251–266. https://doi.org/10.1016/j.engstruct.2017.11.03510.1016/j.engstruct.2017.11.035 ↗
60. T. Wang, D.P. Wang, L.X. Huo, and Y.F. Zhang, Discussion on Fatigue Design of Welded Joints Enhanced by Ultrasonic Peening Treatment (UPT), Int. J. Fatigue, 2009, 31, p 644–650. https://doi.org/10.1016/j.ijfatigue.2008.03.03010.1016/j.ijfatigue.2008.03.030 ↗
61. K.L. Yuan and Y. Sumi, Simulation of Residual Stress and Fatigue Strength of Welded Joints under the Effects of Ultrasonic Impact Treatment (UIT), Int. J. Fatigue, 2016, 92, p 321–332. https://doi.org/10.1016/j.ijfatigue.2016.07.01810.1016/j.ijfatigue.2016.07.018 ↗
62. J. Weinert, S. Gkatzogiannis, I. Engelhardt, P. Knoedel, and T. Ummenhofer, Investigation of Corrosive Influence on the Fatigue Behaviour of HFMI-treated and as-welded Transverse Non-load-carrying Attachments Made of Mild Steel S355, Int. J. Fatigue, 2021, 151, p 106225. https://doi.org/10.1016/j.ijfatigue.2021.10622510.1016/j.ijfatigue.2021.106225 ↗
63. D. Arola and C.L. Williams, Estimating the Fatigue Stress Concentration Factor of Machined Surfaces, Int. J. Fatigue, 2002, 24, p 923–930. https://doi.org/10.1016/S0142-1123(02)00012-910.1016/S0142-1123(02)00012-9 ↗
64. Y.K. Gao, Improvement of Fatigue Property in 7050–T7451 Aluminum Alloy by Laser Peening and Shot Peening, Mater. Sci. Eng. A, 2011, 528, p 3823–3828. https://doi.org/10.1016/j.msea.2011.01.07710.1016/j.msea.2011.01.077 ↗
65. Y. Feng, S.S. Hu, D.P. Wang, and L. Cui, Formation of Short Crack and Its Effect on Fatigue Properties of Ultrasonic Peening Treatment S355 Steel, Mater. Des., 2016, 89, p 507–515. https://doi.org/10.1016/j.matdes.2015.10.00910.1016/j.matdes.2015.10.009 ↗
66. V.V. Knysh, B.N. Mordyuk, S.O. Solovei, V.V. Savitsky, O.L. Mikhodui, D.A. Lesyk, and S.I. Motrunich, HFMI-Induced Fatigue Strength Improvement of S355 Steel Transverse Non-load-Carrying Attachments with Lack of Fusion in the Weld Root, Int. J. Fatigue, 2024, 181, p 108147. https://doi.org/10.1016/j.ijfatigue.2024.10814710.1016/j.ijfatigue.2024.108147 ↗
67. J.-C. Kim, S.-K. Cheong, and H. Noguchi, Residual Stress Relaxation and Low- and High-Cycle Fatigue Behavior of Shot-Peened Medium-Carbon Steel, Int. J. Fatigue, 2013, 56, p 114–122. https://doi.org/10.1016/j.ijfatigue.2013.07.00110.1016/j.ijfatigue.2013.07.001 ↗