Novel Synthesis of SiC-SiO2 Nanotubes from Cinachyrella sp. and Its Improvement of the Corrosion Resistance of Low Carbon Steel in 3.5% NaCl Water Solution
Source abstract
Abstract
Abstract Coat synthesis of silicon carbide and composites of Si derivatives is a challenge for high-quality thin film applications, including corrosion resistance industries. A novel fabrication process of silicon carbide-silicon dioxide nanotube composites (SCDNTs) was developed by a solid reaction of silicon-carbon (marine sponge Cinachyrella sp.) resources. Trimetallic catalyst (Fe/Ni/Zr) supported on different Al2O3 media with heating in an argon flow was used to prepare SCDNTs composite. A higher crystallinity degree of the nanocomposites is attained at a heating temperature of 1200 °C as a suitable starting temperature to have a reasonable degree of crystallinity. XRD analysis of the prepared composite showed the presence of polycrystalline silicon dioxide and two phases of silicon carbide; 3C-SiC and 6H-SiC. TEM analysis showed the presence of silicon carbide's cubic and hexagonal structures embedded into silicon dioxide nanotubes. FTIR analysis confirmed the XRD and TEM analyses through the presence of the functional groups related to Si-Si, Si-O and Si-C. The SCDNTs spin coating process on LWS was optimized at 1000 rpm. Varying thin coatings of up to 5 layers of SCDNTs were prepared low steel substrate to evaluate its corrosion behavior in a 3.5% NaCl solution. Five-layer SCDNTs composite coating on LCS was the favorable coating as obtained from the electrochemical measurements ensured a corrosion inhibition efficiency of 92.5% and corrosion rate of 63.98 mm/y. XRD spectra and stereomicroscope were used to evaluate the surface of LWS coated with SCDNTs before and after corrosion test. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · ZnO doping and properties · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. D. Nguyen and L. Duong, Overview of Materials Used for Marine Industry, WWJMRD, 2019, 5, p 47–52.
2. H. Qian, Z. Xu, S. Chen, Y. Liu, and D. Yan, Silicon Carbide/Enamel Composite Coatings for Steel Corrosion Protection: Microstructure, Thermal Expansion Behavior, and Anti-Corrosion Performance, Surf. Coat. Technol., 2020, 434, p 128172. https://doi.org/10.1016/j.surfcoat.2022.12817210.1016/j.surfcoat.2022.128172 ↗
3. X. Tang, S. Richter, and S. Nesic. Study of Wettability of Different Mild Steel Surfaces. in 17th International Corrosion Congress. vol. 2 p. 1298
4. M.R.Z. Meymian, A. Ghaffarinejad, R. Fazli, and A.K. Mehr, Fabrication and Characterization of Bimetallic Nickel-Molybdenum Nano-Coatings For Mild Steel Corrosion Protection in 35% NaCl Solution, Colloids. Surf. A Physicochem. Eng. Asp., 2020, 593, p 124617. https://doi.org/10.1016/j.colsurfa.2020.12461710.1016/j.colsurfa.2020.124617 ↗
5. R.K. Sahoo, A. Das, S.K. Singh, and B.K. Mishra, Synthesis of Surface Modified SiC Superhydrophobic Coating on Stainless Steel Surface by Thermal Plasma Evaporation Method, Surf. Coat. Technol., 2016, 307, p 476–483. https://doi.org/10.1016/j.surfcoat.2016.09.0210.1016/j.surfcoat.2016.09.02 ↗
6. S. Kar, S. Kumar, P.P. Bandyopadhyay, and S. Paul, Grinding of Hard and Brittle Ceramic Coatings: Force Analysis, J. Eur. Ceram. Soc., 2019, 40, p 453–1461. https://doi.org/10.1016/j.jeurceramsoc.2019.12.05810.1016/j.jeurceramsoc.2019.12.058 ↗
7. X. Wen, Y. Gong, and C. Wang, Experimental Research on Micro Mill-Grinding AISI 1045 Steel with a Cold Spraying Compound Micro Cutting Tool, J. Mech. Sci. Technol., 2018, 32, p 5863–5874. https://doi.org/10.1007/s12206-018-1135-310.1007/s12206-018-1135-3 ↗
8. Z. Ding, G. Sun, M. Guo, X. Jiang, B. Li, and S.Y. Liang, Effect of Phase Transition on Micro-Grinding-Induced Residual Stress, J. Mater. Process. Technol., 2020, 281, p 116647. https://doi.org/10.1016/j.jmatprotec.2020.11664710.1016/j.jmatprotec.2020.116647 ↗
9. A. Pratap, K. Patra, and A.A. Dyakonov, A Comprehensive Review of Micro-Grinding: Emphasis on Toolings, Performance Analysis, Modeling Techniques, and Future Research Directions, Int. J. Adv. Manuf. Technol., 2019, 104, p 63–102. https://doi.org/10.1007/s00170-019-03831-x10.1007/s00170-019-03831-x ↗
10. J.H. Kim, A. Mirzaei, H.W. Kim, and S.S. Kim, Facile Fabrication of Superhydrophobic Surfaces from Austenitic Stainless Steel (AISI 304) by Chemical Etching, Appl. Surf. Sci., 2017, 439, p 598–604. https://doi.org/10.1016/j.apsusc.2017.12.21110.1016/j.apsusc.2017.12.211 ↗
11. A.M. Gatey, S.S. Hosmani, C.A. Figueroa, S.B. Arya, and R.P. Singh, Role of Surface Mechanical Attrition Treatment and Chemical Etching on Plasma Nitriding Behavior of AISI 304L Steel, Surf. Coat. Technol., 2016, 304, p 413–424. https://doi.org/10.1016/j.surfcoat.2016.07.02010.1016/j.surfcoat.2016.07.020 ↗
12. T.A. Saleh and N. Baig, Efficient Chemical Etching Procedure for the Generation of Superhydrophobic Surfaces for Separation of Oil from Water, Prog. Org. Coat., 2019, 133, p 27–32. https://doi.org/10.1016/j.porgcoat.2019.03.04910.1016/j.porgcoat.2019.03.049 ↗
13. Y. Jang, W.T. Choi, C.T. Johnson, A.J. García, P.M. Singh, V. Breedveld, D.W. Hess, and J.A. Champion, Inhibition of Bacterial Adhesion on Nanotextured Stainless Steel 316L by Electrochemical Etching, ACS Biomater. Sci. Eng., 2018, 4, p 90–97. https://doi.org/10.1021/acsbiomaterials.7b0054410.1021/acsbiomaterials.7b00544 ↗
14. C. Lee, A. Kim, and A.J. Kim, Electrochemically Etched Porous Stainless Steel for Enhanced Oil Retention, Surf. Coat. Technol., 2015, 264, p 127–131. https://doi.org/10.1021/acsbiomaterials.7b0054410.1021/acsbiomaterials.7b00544 ↗
15. Z. Liu, F. Zhang, Y. Chen, H. Zhang, Y. Han, J. Liu, L. Huang, and X. Liu, Electrochemical Fabrication of Superhydrophobic Passive Films on Aeronautic Steel Surface, Colloids. Surf. A: Physicochem. Eng. Asp., 2019, 572, p 317–325. https://doi.org/10.1016/j.colsurfa.2019.04.03310.1016/j.colsurfa.2019.04.033 ↗
16. P. Horodek, M.K. Eseev, and A.G. Kobets, Studies of Stainless Steel Exposed to Sandblasting, Nukleonika, 2015 https://doi.org/10.1515/nuka-2015-012910.1515/nuka-2015-0129 ↗
17. H. Mustafa, M. Mezera, D.T.A. Matthews, and G.R.B.E. Römer, Effect of Surface Roughness on the Ultrashort Pulsed Laser Ablation Fluence Threshold of Zinc And Steel, Appl. Surf. Sci., 2019, 488, p 10–21. https://doi.org/10.1016/j.apsusc.2019.05.06610.1016/j.apsusc.2019.05.066 ↗
18. Y. Lian, H. Chen, and C. Mu, Performance of Microtextured Tools Fabricated by Inductively Coupled Plasma Etching in Dry Cutting Tests on Medium Carbon Steel Workpieces, Int. J. Precis. Eng. Manuf.-Green Technol., 2019, 6, p 175–188. https://doi.org/10.1007/s40684-019-00088-310.1007/s40684-019-00088-3 ↗
19. W. Sun, L. Wang, Z. Yang, S. Li, T. Wu, and T.G. Liu, Fabrication of Polydimethylsiloxane-Derived Superhydrophobic Surface on Aluminium Via Chemical Vapour Deposition Technique for Corrosion Protection, Corros. Sci., 2017, 128, p 176–185. https://doi.org/10.1016/j.corsci.2017.09.00510.1016/j.corsci.2017.09.005 ↗
20. A. Baptista, F. Silva, J. Porteiro, J. Míguez, and G. Pinto, Sputtering Physical Vapour Deposition (PVD) Coatings: A Critical Review on Process Improvement and Market Trend Demands, Coatings, 2018, 8, p 402. https://doi.org/10.3390/coatings811040210.3390/coatings8110402 ↗
21. S. Fashu and R. Khan, Recent Work on Electrochemical Deposition of Zn-Ni (-X) Alloys for Corrosion Protection of Steel, Anti-Corros. Methods Mater., 2019 https://doi.org/10.1108/ACMM-06-2018-195710.1108/ACMM-06-2018-1957 ↗
22. C. Cao and J. Cheng, Fabrication of Superhydrophobic Copper Stearate@ Fe3O4 Coating on Stainless Steel Meshes by Dip-Coating for Oil/Water Separation, Surf. Coat. Technol., 2018, 349, p 296–302. https://doi.org/10.1016/j.surfcoat.2018.06.00110.1016/j.surfcoat.2018.06.001 ↗
23. A.V. Braga, D.C.B. Lago, A.R. Pimenta, and L.F. Senna, The Influence of Heat Treatment of Inorganic Conversion Coatings Produced by Sol–Gel Dip Coating on the Anticorrosive Properties of Alumina Films Deposited on Steel Substrate–Part I: Single Conversion Coatings, Surf. Coat. Technol., 2019, 372, p 190–200. https://doi.org/10.1016/j.surfcoat.2020.12550010.1016/j.surfcoat.2020.125500 ↗
24. M. Sabzi, S.M. Far, and S.M. Dezfuli, Effect of Melting Temperature on Microstructural Evolutions, Behavior and Corrosion Morphology of Hadfield Austenitic Manganese Steel in the Casting Process, Int. J. Miner. Metall. Mater., 2018, 25, p 1431–1438. https://doi.org/10.1007/s12613-018-1697-110.1007/s12613-018-1697-1 ↗
25. M. Taheri, R. Naderi, M. Saremi, and M. Mahdavian, Development of an Ecofriendly Silane sol–gel Coating with Zinc Acetylacetonate Corrosion Inhibitor for Active Protection of Mild Steel in Sodium Chloride Solution, J. Sol–Gel. Sci. Technol., 2017, 81, p 154–166. https://doi.org/10.1007/s10971-016-4180-310.1007/s10971-016-4180-3 ↗
26. R. Ji, K. Han, H. Jin, X. Li, Y. Liu, S. Liu, T. Dong, B. Cai, and W. Cheng, Preparation of Ni-SiC Nano-Composite Coating by Rotating Magnetic Field-Assisted Electrodeposition, J. Manuf. Process., 2020, 57, p 787–797. https://doi.org/10.1016/j.jmapro.2020.07.04510.1016/j.jmapro.2020.07.045 ↗
27. W. Akram, A. Farhan Rafique, N. Maqsood, A. Khan, S. Badshah, and R.U. Khan, Characterization of PTFE Film on 316L Stainless Steel Deposited through Spin Coating and Its Anticorrosion Performance in Multi Acidic Mediums, Materials, 2020, 13, p 388. https://doi.org/10.3390/ma1302038810.3390/ma13020388 ↗
28. C. Zhang, S. Pei, H. Ji, Y. Cui, and M. Li, Fabrication of Ni60-SiC Coating on Carbon Steel for Improving Friction, Corrosion Properties, Mater. Sci. Technol., 2017, 33, p 446–453. https://doi.org/10.1080/02670836.2016.122421610.1080/02670836.2016.1224216 ↗
29. J.D.G. Stephen and G.M. Brahmanandhan, Effect on Surface Roughness of Laser AblatedSS 321 Material Coated with Graphene and SiC, Indian J. Sci. Technol., 2016 https://doi.org/10.17485/ijst/2016/v9i34/9395710.17485/ijst/2016/v9i34/93957 ↗
30. C. Hu, Y. Li, N. Zhang, and Y. Ding, Synthesis and Characterization of a Poly (o-anisidine)–SiC Composite and Its Application for Corrosion Protection of Steel, RSC Adv., 2017, 7, p 11732–11742. https://doi.org/10.1039/C6RA27343B10.1039/C6RA27343B ↗
31. M.R. Hosseini, M. Ahangari, M.H. Johar, and S.R. Allahkaram, Optimization of Nano HA-SiC Coating on AISI 316L Medical Grade Stainless Steel via Electrophoretic Deposition, Mater. Lett., 2021, 285, p 129097. https://doi.org/10.1016/j.matlet.2020.12909710.1016/j.matlet.2020.129097 ↗
32. C. Hu, Y. Li, T. Li, Y. Qing, J. Tang, H. Yin, L. Hu, L. Zhang, Y. Xie, and K. Ren, Fabrication of Poly (N-methylaniline)/SiC-ZnO Bilayer Coatings Onto the Carbon Steel Substrate and Studies on Its Anticorrosion Properties, Colloids Surf. A: Physicochem. Eng. Asp., 2020, 585, p 124176. https://doi.org/10.1016/j.colsurfa.2019.12417610.1016/j.colsurfa.2019.124176 ↗
33. J. Chen, B. Ma, G. Liu, H. Song, J. Wu, L. Cui, and Z. Zheng, Wear and Corrosion Properties of 316L-SiC Composite Coating Deposited by Cold Spray on Magnesium Alloy, J. Thermal Spray Technol., 2017, 26, p 1381–1392. https://doi.org/10.1007/s11666-017-0583-010.1007/s11666-017-0583-0 ↗
34. R. Gawel, K. Kyzioł, Z. Jurasz, and Z. Grzesik, Oxidation Resistance of Valve Steels Covered with Thin SiC Coatings, Obtained by RF CVD, Corros. Sci., 2018, 145, p 16–25. https://doi.org/10.1016/j.corsci.2018.09.01410.1016/j.corsci.2018.09.014 ↗
35. H.R. Bakhshandeh, S.R. Allahkaram, and A.H. Zabihi, An Investigation on Cavitation-Corrosion Behavior of Ni/β-SiC Nanocomposite Coatings Under Ultrasonic Field, Ultrason. Sonochem., 2019, 56, p 229–239. https://doi.org/10.1016/j.ultsonch.2019.04.02210.1016/j.ultsonch.2019.04.022 ↗
36. S. Dehgahi, R. Amini, and M. Alizadeh, Corrosion, Passivation and Wear Behaviors of Electrodeposited Ni-Al2O3-SiC Nano-Composite Coatings, Surf. Coat. Technol., 2016, 304, p 502–511. https://doi.org/10.1016/j.surfcoat.2016.07.00710.1016/j.surfcoat.2016.07.007 ↗
37. H. Chen, Y. Ye, C. Wang, X. Ma, H. Wang, and H.W. Liu, Understanding the Corrosion and Tribological Behaviors of CrSiN Coatings with Various Si Contents in HCl Solution, Tribol. Int., 2019, 131, p 530–540. https://doi.org/10.1016/j.triboint.2018.11.01810.1016/j.triboint.2018.11.018 ↗
38. W. Liu, Q. Li, and M.C. Li, Corrosion Behaviour of Hot-Dip Al-Zn-Si and Al-Zn-Si-3Mg Coatings in NaCl Solution, Corros. Sci., 2017, 121, p 72–83. https://doi.org/10.1016/j.corsci.2017.03.01310.1016/j.corsci.2017.03.013 ↗
39. Y. Zhang, M. Zhao, J. Zhang, Q. Shao, J. Li, H. Li, B. Lin, M. Yu, S. Chen, and Z. Guo, Excellent Corrosion Protection Performance of Epoxy Composite Coatings Filled with Silane Functionalized Silicon Nitride, J. Polym. Res., 2018, 25, p 1–13. https://doi.org/10.1007/s10965-018-1518-210.1007/s10965-018-1518-2 ↗
40. A. Ghosal, S. Iqbal, and S. Ahmad, NiO Nanofiller Dispersed Hybrid Soy Epoxy Anticorrosive Coatings, Prog. Org. Coat., 2019, 133, p 61–76. https://doi.org/10.1016/j.porgcoat.2019.04.02910.1016/j.porgcoat.2019.04.029 ↗
41. S. Shi, Y. Zhao, Z. Zhang, and L. Yu, Corrosion Protection of a Novel SiO2@ PANI Coating for Q235 Carbon Steel, Prog. Org. Coat., 2019, 132, p 227–234. https://doi.org/10.1016/j.porgcoat.2019.03.04010.1016/j.porgcoat.2019.03.040 ↗
42. O. Grari, A.E. Taouil, L. Dhouibi, C.C. Buron, and F. Lallemand, Multilayered Polypyrrole-SiO2 Composite Coatings for Functionalization of Stainless Steel: Characterization and Corrosion Protection Behaviour, Prog. Org. Coat., 2015, 88, p 48–53. https://doi.org/10.1016/j.porgcoat.2015.06.01910.1016/j.porgcoat.2015.06.019 ↗
43. I. Stambolova, S. Yordanov, L. Lakov, S. Vassilev, V. Blaskov, and B. Jivov, Preparation of Sol–Gel SiO2 Coatings on Steel and Their Corrosion Resistance, MATEC Web Conf., 2018, 145, p 05011. https://doi.org/10.1051/matecconf/20181450501110.1051/matecconf/201814505011 ↗
44. F. Via, A. Severino, R. Anzalone, C. Bongiorno, G. Litrico, M. Mauceri, and P. Wellmann, From Thin Film to Bulk 3C-SiC Growth: Understanding the Mechanism of Defects Reduction, Mater. Sci. Semicond., 2018, 78, p 57–68. https://doi.org/10.1016/j.mssp.2017.12.01210.1016/j.mssp.2017.12.012 ↗
45. C. Hu, Y. Li, N. Zhang, and Y. Ding, Synthesis and Characterization of a poly (o-anisidine)-SiC Composite and Its Application for Corrosion Protection of Steel, RSC Adv., 2017, 7, p 11732–11742. https://doi.org/10.1039/C6RA27343B10.1039/C6RA27343B ↗
46. A. Ordine, C.A. Achete, O.R. Mattos, I.C.P. Margarit, S.S. Camargo Jr., and T.T. Hirsch, Magnetron Sputtered SiC Coatings as Corrosion Protection Barriers for Steels, Surf. Coat. Technol., 2000, 133, p 583–588. https://doi.org/10.1016/S0257-8972(00)00976-210.1016/S0257-8972(00)00976-2 ↗
47. C.L. Wu, S. Zhang, C.H. Zhang, J.B. Zhang, Y. Liu, and J. Chen, Effects of SiC Content on Phase Evolution and Corrosion Behavior of SiC-Reinforced 316L Stainless Steel Matrix Composites by Laser Melting Deposition, Opt. Laser Technol., 2019, 115, p 134–139. https://doi.org/10.1016/j.optlastec.2019.02.02910.1016/j.optlastec.2019.02.029 ↗
48. Y. Yang and Y.F. Cheng, Electrolytic Deposition of Ni-Co-SiC Nano-Coating for Erosion-Enhanced Corrosion of Carbon Steel Pipes in Oils And Slurry, Surf. Coat. Technol., 2011, 205, p 3198–3204. https://doi.org/10.1016/j.surfcoat.2010.11.03510.1016/j.surfcoat.2010.11.035 ↗
49. J.P. Riviere, J. Delafond, P. Misaelides, and F. Noli, Corrosion Protection of an AISI 321 Stainless Steel by SiC Coatings, Surf. Coat. Technol., 1998, 100, p 243–246. https://doi.org/10.1016/S0257-8972(97)00622-110.1016/S0257-8972(97)00622-1 ↗
50. J. Li, O. Lin, C. Cheng, W. Wang, C. Xu, and L. Ren, Fabrication of a Ni/SiC Composite Coating on Steel Surface with Excellent Corrosion Inhibition Performance, J. Mater. Process. Technol., 2021, 290, p 116987. https://doi.org/10.1016/j.jmatprotec.2020.11698710.1016/j.jmatprotec.2020.116987 ↗
51. X. Lao and X. Xu, Effect of Silica on In-Situ Synthesis of Nano-SiC Whiskers in Porous Al2O3-SiC Composite Ceramics for Solar Thermal Storage by Aluminium-Assisted Carbothermal Reduction, Ceram. Int., 2018, 44, p 20501–20507. https://doi.org/10.1016/j.ceramint.2018.08.04610.1016/j.ceramint.2018.08.046 ↗
52. A. Najafi, F. Golestani-Fard, H.R. Rezaie, and S.P. Saeb, Sol–Gel Synthesis and Characterization of SiC-B4C Nano Powder, Ceram. Int., 2021, 47, p 6376–6387. https://doi.org/10.1016/j.jeurceramsoc.2020.10.05310.1016/j.jeurceramsoc.2020.10.053 ↗
53. Q. Zhang, Z. Sun, X. Liu, J. Sun, R. Yu, and X. Liu, Synthesis of SiC Nanowires by a Simple Chemical Vapour Deposition Route in the Presence of ZrB2, Ceram. Int., 2020, 46, p 12249–12254. https://doi.org/10.1016/j.ceramint.2020.01.27410.1016/j.ceramint.2020.01.274 ↗
54. Z. Zhai, C. Wei, Y. Zhang, Y. Cui, and Q. Zeng, Investigations on the Oxidation Phenomenon of SiC/SiC Fabricated by High Repetition Frequency Femtosecond Laser, Appl. Surf. Sci., 2020, 502, p 144131. https://doi.org/10.1016/j.jare.2021.09.01410.1016/j.jare.2021.09.014 ↗
55. Z. Wang, J. Wang, H. Song, W. Yuan, Y. Liu, T. Ma, and C. Huang, Laser Ablation Behavior of C/SiC Composites Subjected to Transverse Hypersonic Airflow, Corros. Sci., 2021, 183, p 109345. https://doi.org/10.1016/j.corsci.2021.10934510.1016/j.corsci.2021.109345 ↗
56. H. El-Ramady, T. Alshaal, N. Elhawat, E. El-Nahrawy, A.E.D. Omara, S. El-Nahrawy, and M. Fári, Biological Aspects of Selenium and Silicon Nanoparticles in the Terrestrial Environments, Phytoremediation, 2018, 6, p 235–264.10.1007/978-3-319-99651-6_11 ↗
57. M. López-Acosta, A. Leynaert, J. Grall, and M. Maldonado, Silicon Consumption Kinetics by Marine Sponges: An Assessment of Their Role at the Ecosystem Level, LO, 2018, 63, p 2508–2522. https://doi.org/10.1002/lno.1095610.1002/lno.10956 ↗
58. A.L. Drozdov, L.A. Zemnukhova, A.E. Panasenko, N.Y. Polyakova, A.B. Slobodyuk, A.Y. Ustinov, and S.A. Tyurin, Silicon Compounds in Sponges, Appl. Sci., 2021, 11(14), p 6587. https://doi.org/10.3390/app1114658710.3390/app11146587 ↗
59. M. Amina and N.M. Al Musayeib, Biological and Medicinal Importance of Sponge, Biological Resources of Water. InTech, Rijeka, 2018. https://doi.org/10.5772/intechopen.7352910.5772/intechopen.73529 ↗
60. M.G. Hosseini and P.Y. Sefidi, Electrochemical Impedance Spectroscopy Evaluation on the Protective Properties of Epoxy/DBSAdoped Polyaniline-TiO2 Nanocomposite Coated Mild Steel under Cathodic Polarization, Surf. Coat. Technol., 2017, 331, p 66–76. https://doi.org/10.1016/j.surfcoat.2017.10.04310.1016/j.surfcoat.2017.10.043 ↗
61. O. Dagdag, A. El Harfi, A. Essamri, M. El Gouri, S. Chraibi, M. Assouag, B. Benzidia, O. Hamed, H. Lgaz, and S. Jodeh, Phosphorous-Based Epoxy Resin Composition as an Effective Anticorrosive Coating for Steel, Int. J. Ind. Chem., 2018, 9, p 231–240. https://doi.org/10.1007/s40090-018-0152-510.1007/s40090-018-0152-5 ↗
62. H. M. Albetran, Structural Characterization of Graphite Nanoplatelets Synthesized from Graphite Flakes, Preprint PPR201413 (2020). https://doi.org/10.20944/preprints202008.0325.v110.20944/preprints202008.0325.v1 ↗
63. Y. Jiang, F.Q. Jiang, X. Liao, S.L. Lai, S.B. Wang, X.Q. Xiong, and Y.G. Liu, Customized Three-Dimensional Porous Catalyst for Knoevenagel Reaction, J. Porous Mater., 2020, 27, p 779–788. https://doi.org/10.1007/s10934-020-00859-310.1007/s10934-020-00859-3 ↗
64. K. Yang and J.T. Fox, In-Situ Growth of Silicon Carbide Nanowire (SCNW) Matrices from Solid Precursors, Ceram, 2019, 45, p 2922–2931. https://doi.org/10.1016/j.ceramint.2018.09.15710.1016/j.ceramint.2018.09.157 ↗
65. L. Zhuang, W. Zhang, Y. Zhao, H. Shen, H. Lin, and J. Liang, Preparation and Characterization of Fe3O4 Particles with Novel Nanosheets Morphology and Magnetochromatic Property by a Modified Solvothermal Method, Sci. Rep., 2015, 5, p 1–6. https://doi.org/10.1038/srep0932010.1038/srep09320 ↗
66. O. Mangla and S. Roy, Monoclinic Zirconium Oxide Nanostructures Having Tunable Band Gap Synthesized under Extremely Non-Equilibrium Plasma Conditions, Multidiscip. Digit. Publ. Inst. Proc., 2018, 3, p 10. https://doi.org/10.3390/IOCN_2018-1-0548610.3390/IOCN_2018-1-05486 ↗
67. S.O. Ibrahim, Anti-Bacteria Activity of Carbon Nanotubes Grown on Trimetallic Catalyst, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2018, 92, p 025008. https://doi.org/10.1088/2043-6254/aac29d10.1088/2043-6254/aac29d ↗
68. G.V. Pham, A.T. Trinh, T.X.H. To, T.D. Nguyen, T.T. Nguyen, and X.H. Nguyen, Incorporation of Fe3O4/CNTs Nanocomposite in an Epoxy Coating for Corrosion Protection of Carbon Steel, Adv. Nat. Sci.: Nanosci. Nanotechnol., 2014, 5, p 035016. https://doi.org/10.1088/2043-6262/5/3/03501610.1088/2043-6262/5/3/035016 ↗
69. X.H. Chen, C.S. Chen, H.N. Xiao, F.Q. Cheng, G. Zhang, and G.J. Yi, Corrosion Behavior of Carbon Nanotubes–Ni Composite Coating, Surf. Coat. Technol., 2005, 191, p 351–356. https://doi.org/10.1016/j.surfcoat.2004.04.05510.1016/j.surfcoat.2004.04.055 ↗
70. M. Alishahi, S.M. Monirvaghefi, A. Saatchi, and S.M. Hosseini, The Effect of Carbon Nanotubes on the Corrosion and Tribological Behavior of Electroless Ni-P-CNT Composite Coating, Appl. Surf. Sci., 2012, 258, p 2439–2446. https://doi.org/10.1016/j.apsusc.2011.10.06710.1016/j.apsusc.2011.10.067 ↗
71. S. Arora, N. Kumari, and C. Srivastava, Microstructure and Corrosion Behaviour of NiCo-Carbon Nanotube Composite Coatings, J. Alloys Compd., 2019, 801, p 449–459. https://doi.org/10.1016/j.jallcom.2019.06.08310.1016/j.jallcom.2019.06.083 ↗
72. X. Tao, Z. Yao, and X. Luo, Comparison of Tribological and Corrosion Behaviors of Cp Ti Coated with the TiO2/Graphite Coating and Nitrided TiO2/Graphite Coating, J. Alloys Compd., 2017, 718, p 126–133. https://doi.org/10.1016/j.jallcom.2017.05.12510.1016/j.jallcom.2017.05.125 ↗
73. S. Tavakoli, S. Nemati, M. Kharaziha, and S. Akbari-Alavijeh, Embedding CuO Nanoparticles in PDMS-SiO2 Coating to Improve Antibacterial Characteristic and Corrosion Resistance, Colloids Interface Sci. Commun., 2019, 28, p 20–28. https://doi.org/10.1016/j.colcom.2018.11.00210.1016/j.colcom.2018.11.002 ↗
74. S. Ammar, K. Ramesh, B. Vengadaesvaran, S. Ramesh, and A.K. Arof, A Novel Coating Material that Uses Nano-Sized SiO2 Particles to Intensify Hydrophobicity and Corrosion Protection Properties, Electrochim. Acta., 2016, 220, p 417–426. https://doi.org/10.1016/j.electacta.2016.10.09910.1016/j.electacta.2016.10.099 ↗
75. S. Narzary, K. Alamelu, V. Raja, and B.J. Ali, Visible Light Active, Magnetically Retrievable Fe3O4@ SiO2@ g-C3N4/TiO2 Nanocomposite as Efficient Photocatalyst for Removal of Dye Pollutants, J. Environ. Chem. Eng., 2020, 8, p 104373. https://doi.org/10.1016/j.jece.2020.10437310.1016/j.jece.2020.104373 ↗
76. K.W. Mas’udah, M. Diantoro, and A. Fuad, Synthesis and Structural Analysis of Silicon Carbide from Silica Rice Husk and Activated Carbon Using Solid-State Reaction, J. Phys. Conf. Ser., 2018, 1093, p 012033. https://doi.org/10.1088/1742-6596/1093/1/01203310.1088/1742-6596/1093/1/012033 ↗
77. A.G. Barroso, A.R.H. Garcia, and N.L. Del Mastro, X-ray Diffraction Pattern and Relative Crystallinity of Irradiated Arrowroot Starch, Braz. J. Radiat. Sci., 2019, 7, p 2A. https://doi.org/10.15392/bjrs.v7i2A.64510.15392/bjrs.v7i2A.645 ↗
78. C. Bagci, G.P. Kutyla, K.C. Seymour, and W.M. Kriven, Synthesis and Characterization of Silicon Carbide Powders Converted From Metakaolin-Based Geopolymer, J. Am. Ceram. Soc., 2016, 99, p 2521–2530. https://doi.org/10.1111/jace.1425410.1111/jace.14254 ↗
79. X.W. Li, D.L. Qu, Z.J. Li, F. Wu, and N. Xu, Effect of Three Catalysts on Synthesis of Silicon Carbide Whiskers with Silica Fume, Adv. Mater. Res., 2011, 284, p 496–499. https://doi.org/10.4028/www.scientific.net/AMR.284-286.49610.4028/www.scientific.net/AMR.284-286.496 ↗
80. J. Wang, Y. He, Y. Yang, W. Xie, and X. Ling, Research on Quantifying the Hydrophilicity of Leached Coals by FTIR Spectroscopy, Physicochem. Probl. Miner., 2017 https://doi.org/10.5277/ppmp17011910.5277/ppmp170119 ↗
81. T. Jutarosaga, J.S. Jeoung, and S. Seraphin, Infrared Spectroscopy of Si-O Bonding in Low-Dose Low-Energy Separation by Implanted Oxygen Materials, Thin Solid Films, 2005, 476, p 303–311. https://doi.org/10.1016/j.tsf.2004.10.00610.1016/j.tsf.2004.10.006 ↗
82. M. Yoshinari, T. Hayakawa, K. Matsuzaka, T. Inoue, Y. Oda, M. Shimono, and T. Tanaka, Oxygen Plasma Surface Modification Enhances Immobilization of Simvastatin Acid, Biomed. Res., 2006, 27, p 29–36. https://doi.org/10.2220/biomedres.27.2910.2220/biomedres.27.29 ↗
83. F.S. Tehrani, B.T. Goh, M.R. Muhamad, and S.A. Rahman, Pressure Dependent Structural and Optical Properties of Silicon Carbide Thin Films Deposited by Hot Wire Chemical Vapor Deposition From Pure Silane and Methane Gases, J. Mater. Sci. Mater. Electron., 2013, 24, p 1361–1368. https://doi.org/10.1007/s10854-012-0934-z10.1007/s10854-012-0934-z ↗
84. C.K. Choi, Comparison Between Sioc Thin Film by Plasma Enhance Chemical Vapor Deposition and SiO2 Thin Film by Fourier Transform Infrared Spectroscopy, Korean Phys. Soc.: JKPS, 2010, 56, p 1150–1155. https://doi.org/10.3938/jkps.56.115010.3938/jkps.56.1150 ↗
85. A.Y. Oyerinde and E.I. Bello, Use of Fourier Transformation Infrared (FTIR) Spectroscopy for Analysis of Functional Groups in Peanut Oil Biodiesel and Its Blends, Br. J. Appl. Sci. Technol, 2016, 13, p 1–14. https://doi.org/10.9734/BJAST/2016/2217810.9734/BJAST/2016/22178 ↗
86. M.H. Ahmed, J.A. Byrne, J. McLaughlin, and W. Ahmed, Study of Human Serum Albumin Adsorption and Conformational Change on DLC and Silicon Doped DLC Using XPS and FTIR Spectroscopy, J. Biomater. Nanobiotechnol., 2013, 4, p 30383. https://doi.org/10.4236/jbnb.2013.4202410.4236/jbnb.2013.42024 ↗
87. L. Zhu, L. Zhou, N. Huang, W. Cui, Z. Liu, and Z.Z. Xiao, Efficient Preparation of Enantiopure D-Phenylalanine through Asymmetric Resolution Using Immobilized Phenylalanine Ammonia-Lyase From Rhodotorula Glutinis JN-1 in a Recirculating Packed-Bed Reactor, PLoS ONE, 2014, 9, p 108586. https://doi.org/10.1371/journal.pone.010858610.1371/journal.pone.0108586 ↗
88. E.A. Abd El Meguid, S.S. Abd El Rehim, and S.A. Al Kiey, Inhibitory Effect of Cetyltrimethyl Ammonium Bromide on the Corrosion of 904L Stainless Steel in LiBr Solution, Corros. Eng. Sci., 2016, 51, p 429–437. https://doi.org/10.1080/1478422X.2015.113179910.1080/1478422X.2015.1131799 ↗
89. M.B. Nemer, Y. Xiong, A.E. Ismail, and J.H. Jang, Solubility of Fe2 (OH) 3Cl (Pure-Iron End-Member of Hibbingite) in NaCl and Na2SO4 Brines, Chem. Geol., 2011, 280, p 26–32. https://doi.org/10.1016/j.chemgeo.2010.10.00310.1016/j.chemgeo.2010.10.003 ↗
90. L. Wang, C. Guo, Y. Zhu, J. Zhou, L. Fan, and Y. Qian, A FeCl2-Graphite Sandwich Composite with Cl Doping in Graphite Layers: A New Anode Material For High-Performance Li-Ion Batteries, Nanoscale, 2014, 6, p 14174–14179. https://doi.org/10.1039/C4NR05070C10.1039/C4NR05070C ↗
91. J. Wang, L. Li, C.L. Wong, L. Sun, Z. Shen, and S. Madhavi, Controlled Synthesis of α-FeOOH Nanorods and Their Transformation to Mesoporous α-Fe2O3, Fe3O4@C Nanorods As Anodes for Lithium Ion Batteries, RSC Adv., 2013, 3, p 15316–15326. https://doi.org/10.1039/C3RA41886C10.1039/C3RA41886C ↗
92. D. Mahmoudi, A.T. Tabrizi, and H. Aghajani, Study the Variation of Surface Topography & Corrosion Resistance of Cr-GO Nanocomposite Coatings by Addition of GO Nanoparticles, Surf. Topogr. Metrol. Prop., 2021, 9(1), p 015025. https://doi.org/10.1088/2051-672X/abe6f310.1088/2051-672X/abe6f3 ↗
93. A.T. Tabrizia, H. Aghajanib, and F.F. Laleh, Study the Effect of Surface Parameters Variation on the Corrosion Behavior of Thin Chromium Layer on Modified Titanium, Prot. Met. Phys. Chem. Surf., 2022, 58(2), p 365–373. https://doi.org/10.1134/S207020512202018610.1134/S2070205122020186 ↗