Fabrication and Fatigue Properties of Dissimilar Steel Functionally Graded Material Structure Through Wire Arc Additive Manufacturing
Source abstract
Abstract
Functionally graded materials (FGM) are structures that can provide different material properties together. To produce these structures, the additive manufacturing method has been used and preferred. In this study, an FGM structure was fabricated by wire arc additive manufacturing (WAAM) process using low-alloy ER70S-6 and austenitic stainless steel 308LSi metal wires. The FGM structure was characterized by tensile, fatigue, hardness tests, and microstructure examinations. As a result of the applied tests, it was found that the FGM structure has strong interfacial strength. In addition, no formations or defects that could reduce the strength of the FGM part were observed at the interface and in the regions close to the interface. The sides of the FGM part containing the base material could reflect their characteristic material properties. FGM part, whose properties can be changed partially, has been successfully fabricated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. G. Marinelli, F. Martina, H. Lewtas, D. Hancock, S. Ganguly, and S. Williams, Functionally Graded Structures of Refractory Metals by Wire Arc Additive Manufacturing, Sci. Technol. Weld. Join., 2019, 24, p 495–503. https://doi.org/10.1080/13621718.2019.158616210.1080/13621718.2019.1586162 ↗
2. A. Kumar and K. Maji, Microstructure and Chemical Composition Analysis of Double Wire Arc Additive Manufactured Bimetallic Structure, J. Mater. Eng. Perform, 2021, 30, p 5413–5425. https://doi.org/10.1007/s11665-021-05819-910.1007/s11665-021-05819-9 ↗
3. Y. Tian, J. Shen, S. Hu, X. Chen, Y. Cai, and J. Han, Effect of Deposition Layer on Microstructure of Ti–Al Bimetallic Structures Fabricated by Wire and Arc Additive Manufacturing, Sci. Technol. Weld. Join., 2021, 2, p 1–11. https://doi.org/10.1080/13621718.2021.199685010.1080/13621718.2021.1996850 ↗
4. C. Dharmendra, S. Shakerin, and M. Mohammadi, Metallurgical Assessment of Additive Manufactured Nickel Aluminum Bronze-316L Stainless Steel Bimetallic Structure: Effect of Deposit Geometry on the Interfacial Characteristics and Cracking, J. Mater. Eng. Perform, 2021 https://doi.org/10.1007/s11665-021-06194-110.1007/s11665-021-06194-1 ↗
5. Y. Zhang, F. Cheng, and S. Wu, Improvement of Pitting Corrosion Resistance of wire arc Additive Manufactured Duplex Stainless Steel Through Post-Manufacturing Heat-Treatment, Mater. Characterizat., 2021, 171, p 110743. https://doi.org/10.1016/j.matchar.2020.11074310.1016/j.matchar.2020.110743 ↗
6. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P. Colegrove, Wire + Arc Additive Manufacturing, Mater. Sci. Technol., 2016, 32, p 641–647. https://doi.org/10.1179/1743284715Y.000000007310.1179/1743284715Y.0000000073 ↗
7. A.S. Yildiz, K. Davut, B. Koc, and O. Yilmaz, Wire Arc Additive Manufacturing of High-Strength Low Alloy Steels: Study of Process Parameters and Their Influence on the Bead Geometry and Mechanical Characteristics, Int. J. Adv. Manuf. Technol., 2020, 108, p 3391–3404. https://doi.org/10.1007/s00170-020-05482-910.1007/s00170-020-05482-9 ↗
8. D. Jafari, T.H.J. Vaneker, and I. Gibson, Wire and Arc Additive Manufacturing: Opportunities and Challenges to Control the Quality and Accuracy of Manufactured Parts, Mater. Des., 2021, 202, p 109471. https://doi.org/10.1016/j.matdes.2021.10947110.1016/j.matdes.2021.109471 ↗
9. S. Mohan Kumar, A. Rajesh Kannan, N. Pravin Kumar, R. Pramod, N. Siva Shanmugam, A.S. Vishnu et al., Microstructural Features and Mechanical Integrity of Wire Arc Additive Manufactured SS321/Inconel 625 Functionally Gradient Material, J. Mater. Eng. Perform, 2021, 30, p 5692–5703. https://doi.org/10.1007/s11665-021-05617-310.1007/s11665-021-05617-3 ↗
10. Y. Tian, J. Shen, S. Hu, J. Gou, and E. Kannatey-Asibu, Wire and arc Additive Manufactured Ti–6Al–4V/Al–6.25Cu Dissimilar Alloys by CMT-Welding: Effect of Deposition Order on Reaction Layer, Sci. Technol. Weld. Join., 2020, 25, p 73–80. https://doi.org/10.1080/13621718.2019.162937910.1080/13621718.2019.1629379 ↗
11. K. Treutler, S. Kamper, M. Leicher, T. Bick, and V. Wesling, Multi-Material Design in Welding Arc Additive Manufacturing, Metals, 2019, 9, p 809. https://doi.org/10.3390/met907080910.3390/met9070809 ↗
12. S. Singh, A.N. Jinoop, I.A. Palani, C.P. Paul, K.P. Tomar, and K.G. Prashanth, Microstructure and Mechanical Properties of NiTi-SS Bimetallic Structures Built Using Wire Arc Additive Manufacturing, Mater. Lett., 2021, 303, p 130499. https://doi.org/10.1016/j.matlet.2021.13049910.1016/j.matlet.2021.130499 ↗
13. C. Shen, X. Hua, M. Reid, K.-D. Liss, G. Mou, Z. Pan et al., Thermal Induced Phase Evolution of Fe–Fe3Ni Functionally Graded Material Fabricated Using the Wire-Arc Additive Manufacturing Process: An In-situ Neutron Diffraction Study, J. Alloys Comp., 2020, 826, p 154097. https://doi.org/10.1016/j.jallcom.2020.15409710.1016/j.jallcom.2020.154097 ↗
14. J. Wang, Z. Pan, Y. Ma, Y. Lu, C. Shen, D. Cuiuri et al., Characterization of Wire Arc Additively Manufactured Titanium Aluminide Functionally Graded Material: Microstructure, Mechanical Properties and Oxidation Behaviour, Mater. Sci. Eng., A, 2018, 734, p 110–119. https://doi.org/10.1016/j.msea.2018.07.09710.1016/j.msea.2018.07.097 ↗
15. S. Chandrasekaran, S. Hari, and M. Amirthalingam, Wire Arc Additive Manufacturing of Functionally Graded Material for Marine Risers, Mater. Sci. Eng. A., 2020, 792, p 139530. https://doi.org/10.1016/j.msea.2020.13953010.1016/j.msea.2020.139530 ↗
16. A. Rajesh Kannan, S. Mohan Kumar, R. Pramod, N. Pravin Kumar, N. Siva Shanmugam, and Y. Palguna, Microstructure and Mechanical Properties of Wire Arc Additive Manufactured bi-Metallic Structure, Sci. Technol. Weld. Joining, 2021, 26, p 47–57. https://doi.org/10.1080/13621718.2020.183314010.1080/13621718.2020.1833140 ↗
17. W.D. Callister, D.D. Rethwisch, K. Genel, C. Bindal, M. Demirkol, R. Artır et al., Malzeme Bilimi ve Mühendisliği, Mater. Sci. Eng., 2014, 20, p 103.
18. M. Ghaffari, A. Vahedi Nemani, M. Rafieazad, and A. Nasiri, Effect of Solidification Defects and HAZ Softening on the Anisotropic Mechanical Properties of a Wire Arc Additive-Manufactured Low-Carbon Low-Alloy Steel Part, JOM, 2019, 71, p 4215–4224. https://doi.org/10.1007/s11837-019-03773-510.1007/s11837-019-03773-5 ↗
19. M. Rafieazad, M. Ghaffari, A. Vahedi Nemani, and A. Nasiri, Microstructural Evolution and Mechanical Properties of a loW-Carbon Low-Alloy Steel Produced by Wire Arc Additive Manufacturing, Int J Adv Manuf Technol, 2019, 105, p 2121–2134. https://doi.org/10.1007/s00170-019-04393-810.1007/s00170-019-04393-8 ↗
20. E. Aldalur, F. Veiga, A. Suárez, J. Bilbao, and A. Lamikiz, High Deposition Wire Arc Additive Manufacturing of Mild Steel: Strategies and Heat Input Effect on Microstructure and Mechanical Properties, J. Manuf. Process., 2020, 58, p 615–626. https://doi.org/10.1016/j.jmapro.2020.08.06010.1016/j.jmapro.2020.08.060 ↗
21. C.V. Haden, G. Zeng, F.M. Carter, C. Ruhl, B.A. Krick, and D.G. Harlow, Wire and Arc Additive Manufactured Steel: Tensile and Wear Properties, Addit. Manuf., 2017, 16, p 115–123. https://doi.org/10.1016/j.addma.2017.05.01010.1016/j.addma.2017.05.010 ↗
22. J.V. Gordon, C.V. Haden, H.F. Nied, R.P. Vinci, and D.G. Harlow, Fatigue Crack Growth Anisotropy, Texture and Residual Stress in Austenitic Steel Made by Wire and Arc Additive Manufacturing, Mater. Sci. Eng. A, 2018, 724, p 431–438. https://doi.org/10.1016/j.msea.2018.03.07510.1016/j.msea.2018.03.075 ↗
23. D. Yang, H. Fang, Y. Peng, J. Fan, Y. Huang, K. Wang et al., Investigation of Spatters in Cold Metal Transfer+Pulse-Based Wire and Arc Additive Manufacturing of High Nitrogen Austenitic Stainless Steel, J. Mater. Eng. Perform, 2021, 30, p 6881–6894. https://doi.org/10.1007/s11665-021-06048-w10.1007/s11665-021-06048-w ↗
24. X. Zhang, Q. Zhou, K. Wang, Y. Peng, J. Ding, J. Kong et al., Study on Microstructure and Tensile Properties of High Nitrogen Cr-Mn Steel PROCESSED by CMT Wire and Arc Additive Manufacturing, Mater. Des., 2019, 166, p 107611. https://doi.org/10.1016/j.matdes.2019.10761110.1016/j.matdes.2019.107611 ↗
25. D. Yang, Y. Huang, J. Fan, M. Jin, Y. Peng, and K. Wang, Effect of N2 Content in Shielding Gas on Formation Quality and Microstructure of High Nitrogen Austenitic Stainless Steel Fabricated by Wire and Arc Additive Manufacturing, J. Manuf. Process., 2021, 61, p 261–269. https://doi.org/10.1016/j.jmapro.2020.11.02010.1016/j.jmapro.2020.11.020 ↗
26. P. Dirisu, G. Supriyo, F. Martina, X. Xu, and S. Williams, Wire Plus Arc Additive Manufactured Functional Steel Surfaces Enhanced by Rolling, Int. J. Fatigue., 2020, 130, p 105237. https://doi.org/10.1016/j.ijfatigue.2019.10523710.1016/j.ijfatigue.2019.105237 ↗
27. H. Bartsch, R. Kühne, S. Citarelli, S. Schaffrath, and M. Feldmann, Fatigue Analysis of Wire arc Additive Manufactured (3D Printed) Components with Unmilled Surface, Structures, 2021, 31, p 576–589. https://doi.org/10.1016/j.istruc.2021.01.06810.1016/j.istruc.2021.01.068 ↗
28. T. Ron, G.K. Levy, O. Dolev, A. Leon, A. Shirizly, and E. Aghion, The Effect of Microstructural Imperfections on Corrosion Fatigue of Additively Manufactured ER70S-6 Alloy Produced by Wire Arc Deposition, Metals, 2020, 10, p 98. https://doi.org/10.3390/met1001009810.3390/met10010098 ↗
29. B. Guennec, A. Ueno, T. Sakai, M. Takanashi, and Y. Itabashi, Effect of the Loading Frequency on Fatigue Properties of JIS S15C Low Carbon Steel and Some Discussions Based on Micro-Plasticity Behavior, Int. J. Fatigue, 2014, 66, p 29–38. https://doi.org/10.1016/j.ijfatigue.2014.03.00510.1016/j.ijfatigue.2014.03.005 ↗
30. A.A. Zainulabdeen, Study of Fatigue Fractography of Mild Steel Used in Automotive Industry, Alkej., 2019, 15, p 82–8. https://doi.org/10.22153/kej.2019.07.00310.22153/kej.2019.07.003 ↗
31. T. Abe and H. Sasahara, Dissimilar Metal Deposition with a Stainless Steel and Nickel-based Alloy Using Wire and Arc-based Additive Manufacturing, Precis. Eng., 2016, 45, p 387–395. https://doi.org/10.1016/j.precisioneng.2016.03.01610.1016/j.precisioneng.2016.03.016 ↗
32. L. Lu, Y. Tian, Y. Cai, Y. Xin, X. Chen, and G. Zhang et al., Microstructure and Mechanical Properties of a Functionally Graded Material from TA1 to Inconel 625 Fabricated by Dual Wire + Arc Additive Manufacturing, Mater. Lett., 2021, 298, p 130010. https://doi.org/10.1016/j.matlet.2021.13001010.1016/j.matlet.2021.130010 ↗
33. P. Sędek, J. Brózda, L. Wang, and P.J. Withers, Residual Stress Relief in MAG Welded Joints of Dissimilar Steels, Int. J. Press. Vessels Pip., 2003, 80, p 705–713. https://doi.org/10.1016/j.ijpvp.2003.08.00410.1016/j.ijpvp.2003.08.004 ↗