Effects of Surface Treatment on the Cavitation Erosion–Corrosion Performance of 17-4PH Stainless Steel in Sodium Chloride Solution
Source abstract
Abstract
Two different surface treatments are applied on 17-4PH stainless steel with laser techniques to improve mechanical properties and cavitation erosion–corrosion resistance. One involves laser precipitation hardening and the other implements laser cladding of Stellite 6 powder. The mechanical properties of the laser-treated surfaces are determined using nanoindentation test, and the cavitation erosion behavior of 17-4PH stainless steel with the laser-treated surface is investigated in 3.5 wt.% NaCl solution. The eroded surfaces are studied using SEM, and the depth data of the pits generated in the specimen surface are fitted into the extreme value analysis model to predict the maximum pit depth that may occur in the material surface with a given service life. Untreated 17-4PH stainless steel is also tested under the same conditions for comparison. It is shown that both surface treatments improve the mechanical and cavitation erosion–corrosion performance of 17-4PH stainless steel and laser cladding Stellite 6 treatment is even better.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Davis, JR, K.M. Mills, and Lampman, SR, Metals Handbook Vol 1 Properties and Selection: Irons, Steels, and High-Performance Alloys, ASM International, Materials Park, 2000, p 140–194
2. J.H. Reinshagen and J.C. Witsberger, Properties of Precipitation Hardening Stainless Steel Processed by Conventional Powder Metallurgy Techniques, Adv. Powder. Metall. Part. Mater., 1994, 7, p 313–323
3. M. Esfandiari and H. Dong, The Corrosion and Corrosion–Wear Behaviour of Plasma Nitrided 17-4PH Precipitation Hardening Stainless Steel, Surf. Coat. Technol., 2007, 202(3), p 466–47810.1016/j.surfcoat.2007.06.069 ↗
4. W.T. Chien and C.S. Tsai, The Investigation on the Prediction of Tool Wear and the Determination of Optimum Cutting Conditions in Machining 17-4PH Stainless Steel, J. Mater. Proc. Technol., 2003, 140(1–3), p 340–34510.1016/S0924-0136(03)00753-2 ↗
5. U.K. Viswanathan, S. Banerjee, and R. Krishnan, Effects of Aging on the Microstructure of 17-4PH Stainless Steel, Mater. Sci. Eng. A., 1988, 104, p 181–18910.1016/0025-5416(88)90420-X ↗
6. L.I. Ping, Q.Z. Cai, B.K. Wei, and X.Z. Zhang, Effect of Aging Temperature on Erosion–Corrosion Behavior of 17-4PH Stainless Steels in Dilute Sulphuric Acid Slurry, J. Iron. Steel Res. Int., 2006, 13(5), p 73–7810.1016/S1006-706X(06)60099-X ↗
7. M. Murayama, K. Hono, and Y. Katayama, Microstructural Evolution in a 17-4PH Stainless Steel After Aging at 400 C, Metall. Mater. Trans. A, 1999, 30(2), p 345–35310.1007/s11661-999-0323-2 ↗
8. C.N. Hsiao, C.S. Chiou, and J.R. Yang, Aging Reactions in a 17-4PH Stainless Steel, Mater. Chem. Phys., 2002, 74(2), p 134–14210.1016/S0254-0584(01)00460-6 ↗
9. J.D. Bressan, D.P. Daros, A. Sokolowski, R.A. Mesquita, and C.A. Barbosa, Influence of Hardness on the Wear Resistance of 17-4PH Stainless Steel Evaluated by the Pin-on-Disc Testing, J. Mater. Proc. Technol., 2008, 205(1), p 353–35910.1016/j.jmatprotec.2007.11.251 ↗
10. D. Nakhaie and M.H. Moayed, Pitting Corrosion of Cold Rolled Solution Treated 17-4PH Stainless Steel, Corros. Sci., 2014, 80(3), p 290–29810.1016/j.corsci.2013.11.039 ↗
11. Z.Y. Chen, G.J. Zhou, and Z.H. Chen, Microstructure and Hardness Investigation of 17-4PH Stainless Steel by Laser Quenching, Mat. Sci. Eng. A., 2012, 534, p 536–54110.1016/j.msea.2011.12.004 ↗
12. D.F. Susan, T.B. Crenshaw, and J.S. Gearhart, The Effects of Casting Porosity on the Tensile Behavior of Investment Cast 17-4PH Stainless Steel, J. Mater. Eng. Perform., 2015, 24(8), p 2917–292410.1007/s11665-015-1594-y ↗
13. R. Rashid, S.H. Masood, D. Ruan, S. Palanisamy, R.R. Rashid, and M. Brandt, Effect of Scan Strategy on Density and Metallurgical Properties of 17-4PH Parts Printed By Selective Laser Melting (Slm), J. Mater. Proc. Technol., 2017, 249, p 502–51110.1016/j.jmatprotec.2017.06.023 ↗
14. M. Liu, F. Ma, G. Chang, F. Fu, N.S. Cheruvu, L. Yu, and K. Xu, Experimental Investigation of Failure Behavior of the Cracked 17-4PH Steel Blades in a Top Gas Energy Recovery Turbine, Eng. Fail. Anal., 2019, 105, p 545–55410.1016/j.engfailanal.2019.07.009 ↗
15. S.S. Tavares, J.M. Pardal, T.R. Martins, and M.R. da Silva, Influence of Sulfur Content on the Corrosion Resistance of 17-4PH Stainless Steel, J. Mater. Eng. Perform., 2017, 26(6), p 2512–251910.1007/s11665-017-2693-8 ↗
16. M. Razavi, R. Svenningsson, and M. Irwin, Experimental Study of the Filling of Thin-Walled Investment Castings in 17-4PH Stainless Steel, Metal. Foundry Eng., 2015, 41(2), p 85–9810.7494/mafe.2015.41.2.85 ↗
17. E.J. Gumbel, Statistical Theory of Extreme Values and Some Practical Applications. NBS Appl. Math. Ser., 1954.
18. L.E. Samuels, Metallographic Polishing by Mechanical Methods, ASM International, Cleveland, 2003
19. W. Xu, R. Liu, P.C. Patnaik, M.X. Yao, and X.J. Wu, Mechanical and Tribological Properties of Newly Developed Tribaloy Alloys, Mat. Sci. Eng. A Struct., 2007, 452, p 427–43610.1016/j.msea.2006.10.088 ↗
20. W.C. Oliverand and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus Using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 1992, 7(6), p 1564–158310.1557/JMR.1992.1564 ↗
21. A.C. Fischer-Cripps, Nanoindentation. Time-Dependent Nanoindentation, Vol 2, Springer, New York, 2011, p 125–145
22. B.J. Briscoe, L. Fiori, and E. Pelillo, Nano-Indentation of Polymeric Surfaces, J. Phys. D Appl. Phy., 1998, 31(19), p 239510.1088/0022-3727/31/19/006 ↗
23. G.M. Pharr, W.C. Oliver, and F.R. Brotzen, On the Generality of the Relationship Among Contact Stiffness, Contact Area, and Elastic Modulus During Indentation, J. Mater. Res., 1992, 7(3), p 613–61710.1557/JMR.1992.0613 ↗
24. ASTM G32—16, Standard Test Method for Cavitation Erosion Using Vibratory Apparatus. in American Society for Testing and Materials, West Conshohocken, Pennsylvania, 2016.
25. Z. Wang, W.Z. Luan, J.J. Huang, and C.H. Jiang, XRD Investigation of Microstructure Strengthening Mechanism of Shot Peening on Laser Hardened 17-4PH, Mat. Sci. Eng. A., 2011, 528(21), p 6417–642510.1016/j.msea.2011.03.098 ↗
26. Y.P. Ding, R. Liu, J.H. Yao, Q.L. Zhang, and L. Wang, Stellite Alloy Mixture Hardfacing Via Laser Cladding for Control Valve Seat Sealing Surfaces, Surf. Coat. Technol., 2017, 329, p 97–10810.1016/j.surfcoat.2017.09.018 ↗
27. P.M. Aziz, Application of the Statistical Theory of Extreme Values to the Analysis of Maximum Pit Depth Data for Aluminum, Corrosion., 1956, 12, p 35–4610.5006/0010-9312-12.10.35 ↗
28. S.M. Sharland, C.C. Naish, K.J. Taylor, and G.P. Marsh, An Experimental and Modelling Study of the Localized Corrosion of Carbon Steel Overpacks for the Geological Disposal of Radioactive Waste. 1991, pp. 402–418.
29. X.Z. Zhang, R. Liu, K.Y. Chen, and M.X. Yao, Pitting Corrosion Characterization of Wrought Stellite Alloys in Green Death Solution with Immersion Test and Extreme Value Analysis Model, J. Mater. Eng. Perform., 2014, 23(5), p 1718–172510.1007/s11665-014-0952-5 ↗
30. J.E. Strutt, J.R. Nicholls, and B. Barbier, The Prediction of Corrosion by Statistical Analysis of Corrosion Profiles, Corros. Sci., 1985, 25(5), p 305–31510.1016/0010-938X(85)90109-X ↗
31. A. Kasem and S.M. Ahmed, Cavitation Erosion Mechanism Based on Analysis of Erosion Particles, J. Tribo., 2008, 130(3), p 031601–03160610.1115/1.2913552 ↗
32. X.B. Zhang, X. Chang, T. Wei, and C.S. Liu, Microstructure and Cavitation-Erosion Mechanism of Laser Cladding NiCrSiB Coating on CrNiMo Stainless Steel, Adv. Mater. Res., 2011, 154–155, p 1788–1791
33. S. Hattori and N. Mikami, Cavitation Erosion Resistance of Stellite Alloy Weld Overlays, Wear, 2009, 267(11), p 1954–196010.1016/j.wear.2009.05.007 ↗
34. F.B. Liu, Q.Y. Zeng, H. Jiang, Y. Cui, L.G. Cao, and Y. Yang, Generation Mechanism of Fe-Base Nanostructures Induced by Cavitation Erosion, MocaxueXuebao Tribol., 2016, 36(6), p 749–754
35. K.H. Lo, F.T. Cheng, and H.C. Man, Cavitation Erosion Mechanism of S31600 Stainless Steel Laser Surface-Modified with Unclad WC, Mater. Sci. Eng. A, 2003, 357(1–2), p 168–18010.1016/S0921-5093(03)00216-8 ↗
36. D. Bregnbak, J.D. Johansen, M.S. Jellesen, C. Zachariae, T. Menné, and J.P. Thyssen, Chromium Allergy and Dermatitis: Prevalence and Main Findings, Contact Dermat., 2015, 73(5), p 261–28010.1111/cod.12436 ↗
37. E.M. Garcia, J.S. Santos, E.C. Pereira, and M.B.J.G. Freitas, Electrodeposition of Cobalt from Spent Li-ion Battery Cathodes by the Electrochemistry Quartz Crystal Microbalance Technique, J. Power Sour., 2008, 185(1), p 549–55310.1016/j.jpowsour.2008.07.011 ↗
38. V. Nguyen, Determining Localized Anode Condition to Maintain Effective Corrosion Protection. M.S. Thesis, Chemical Engineering, Oregon State Univeristy, Corvallis, OR, 2009.
39. Y. Li, R. Liu, G. McRae, and M.X. Yao, Corrosion Performance of Valve Seat Hardfacing Materials in Amine Environment of Boiler Feed Water Service, Prot. Metal. Phys. Chem. Surf., 2019, 55(2), p 377–38810.1134/S2070205119020187 ↗