Fabrication of Magnesium Phosphate Coating by Electrochemical Cathodic Method for Corrosion Protection of Sintered NdFeB Magnets
Source abstract
Abstract
Phosphate coating is a commonly used anti-corrosion coating for NdFeB magnets, but its application is hindered by the intrinsic porosity and adverse impact on magnetic performance during the conventional chemical conversion process. Here, a compact magnesium phosphate coating with high protective efficiency has been successfully fabricated on the surface of NdFeB magnets. The surface properties, corrosion resistance and magnetic performance were investigated in detail. It is found that the quality of magnesium phosphate coating significantly depends on the deposition temperature. The coated sample deposited at 60 °C possesses the highest impedance value and protective efficiency (94.25%), because this temperature is appropriate for sufficient deposition of magnesium phosphate crystals (MgHPO4·3H2O) and can avoid defects induced by the excess growth of (021) plane. In addition, the magnesium phosphate coatings fabricated by electrochemical cathodic method exhibits no prejudice to the magnetic performance of NdFeB magnets. The superiority in corrosion resistance and magnetic performance of electrodeposited magnesium phosphate coating provides tremendous application prospect for developing protective coating of sintered NdFeB magnets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnesium Alloys: Properties and Applications · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. S. Mao, H. Yang, Z. Song, J. Li, H. Ying and K. Sun, Corrosion Behaviour of Sintered NdFeB Deposited with an Aluminium Coating, Corros. Sci, 2011, 53, p 1887–1894.10.1016/j.corsci.2011.02.006 ↗
2. A.K. Pathak, M. Khan, K.A. Gschneidner Jr., R.W. McCallum, L. Zhou, K. Sun, K.W. Dennis, C. Zhou, F.E. Pinkerton, M.J. Kramer and V.K. Pecharsky, Cerium: An Unlikely Replacement of Dysprosium in High Performance Nd-Fe-B Permanent Magnets, Adv. Mater., 2015, 27, p 2663–2667.10.1002/adma.201404892 ↗
3. M. Bi, C. Xu, A.G. Wattoo, R. Bagheri, Y. Chen, S. Mao, Z. Lv, L. Yang and Z. Song, Corrosion Behavior of Sintered CeNdFeB Magnets in Different Solutions, J. Alloys Compd, 2017, 703, p 232–241.10.1016/j.jallcom.2017.01.347 ↗
4. E. Isotahdon, E. Huttunen-Saarivirta, V.T. Kuokkala and M. Paju, Corrosion Behaviour of Sintered Nd-Fe-B Magnets, Mater. Chem. Phys., 2012, 135, p 762–771.10.1016/j.matchemphys.2012.05.056 ↗
5. L. Schultz, A.M. El-Aziz, G. Barkleit and K. Mummert, Corrosion Behaviour of Nd-Fe-B Permanent Magnetic Alloys, Mat. Sci. Eng. A., 1999, 267, p 307–313.10.1016/S0921-5093(99)00107-0 ↗
6. G. Sadullahoğlu, B. Altuncevahir and O. Addemir, Effect of Al and Cu Additions on Microstructure and Magnetic Properties of NdTb-FeCo-B Magnets, Acta. Phys. Pol. A., 2014, 125, p 1172–1175.10.12693/APhysPolA.125.1172 ↗
7. J. Ni, S. Zhou, Z. Jia and C. Wang, Improvement of Corrosion Resistance in Nd-Fe-B Sintered Magnets by Intergranular Additions of Sn, J. Alloys Compd., 2014, 588, p 558–561.10.1016/j.jallcom.2013.11.006 ↗
8. K. Chitrada, K.S. Raja, B. Pesic and I. Charit, Corrosion behavior of surface modified NdFeB permanent magnet in dilute chloride environments, Electrochim. Acta., 2014, 123, p 23–32.10.1016/j.electacta.2014.01.011 ↗
9. J.L. Xu, Q.F. Xiao, D.D. Mei, Y.X. Tong, Y.F. Zheng, L. Li and Z.C. Zhong, Microstructure, Corrosion Resistance and Formation Mechanism of Alumina Micro-Arc Oxidation Coatings on Sintered NdFeB Permanent Magnets, Surf. Coat. Tech., 2017, 309, p 621–627.10.1016/j.surfcoat.2016.12.023 ↗
10. S. Wang, W. Li, D. Han, H. Liu and L. Zhu, Preparation and Application of a Waterborne Acrylic Copolymer-Siloxane Composite: Improvement on the Corrosion Resistance of Zinc-Coated NdFeB Magnets, RSC Adv., 2015, 5, p 81759–81767.10.1039/C5RA10851A ↗
11. J.L. Xu, Z.X. Huang, J.M. Luo and Z.C. Zhong, Effect of Titania Particles on the Microstructure and Properties of the Epoxy Resin Coatings on Sintered NdFeB Permanent Magnets, J. Magn. Magn. Mater., 2014, 355, p 31–36.10.1016/j.jmmm.2013.11.050 ↗
12. J. Zheng, H. Chen, L. Qiao, M. Lin, L. Jiang, S. Che and Y. Hu, Double Coating protEction of Nd-Fe-B Magnets: Intergranular Phosphating Treatment and Copper Plating, J. Magn. Magn. Mater., 2014, 371, p 1–4.10.1016/j.jmmm.2014.07.004 ↗
13. I. Rampin, F. Bisaglia and M. Dabalà, Corrosion Properties of NdFeB Magnets Coated by a Ni/Cu/Ni Layer in Chloride and Sulfide Environments, J. Mater. Eng. Perform., 2010, 19, p 970–975.10.1007/s11665-009-9568-6 ↗
14. S. Mao, T. Xie, B. Zheng, F. Huang, Z. Song and Y. Li, Structures and Properties of Sintered NdFeB Coated with IBAD-Al/Al2O3 Multilayers, Surf. Coat. Tech., 2012, 207, p 149–154.10.1016/j.surfcoat.2012.06.048 ↗
15. L. Tao, H. Li, J. Shen, K. Qiao, W. Wang, C. Zhou, J. Zhang and Q. Tang, Corrosion Resistance of the NdFeB Coated with AlN/SiC Bilayer Thin Films by Magnetron Sputtering Under Different Environments, J. Magn. Magn. Mater., 2015, 375, p 124–128.10.1016/j.jmmm.2014.10.012 ↗
16. X. Ding, L. Xue, X. Wang, K.H. Ding, S.L. Cui, Y.C. Sun and M.S. Li, Influence of Bath PH Value on Microstructure and Corrosion Resistance of Phosphate Chemical Conversion Coating on Sintered Nd-Fe-B Permanent Magnets, J. Magn. Magn. Mater., 2016, 416, p 247–255.10.1016/j.jmmm.2016.04.048 ↗
17. H. Bala, N.M. Trepak, S. Szymura, A.A. Lukin, V.A. Gaudyn, L.A. Isaicheva, G. Pawłowska and L.A. Ilina, Corrosion Protection of Nd-Fe-B Type Permanent Magnets by Zinc Phosphate Surface Conversion Coatings, Intermetallics, 2001, 9, p 515–519.10.1016/S0966-9795(01)00035-8 ↗
18. T.S.N.S. Narayanan, Surface Pretreatment by Phosphate Conversion Coatings-A Review, Rev. Adv. Mater. Sci., 2005, 9, p 130–177.
19. E.P. Banczek, P.R.P. Rodrigues and I. Costa, Evaluation of Porosity and Discontinuities in Zinc Phosphate Coating by Means of Voltametric Anodic Dissolution (VAD), Surf. Coat. Tech., 2009, 203, p 1213–1219.10.1016/j.surfcoat.2008.10.026 ↗
20. T. Ishizaki, I. Shigematsu and N. Saito, Anticorrosive Magnesium Phosphate Coating on AZ31 Magnesium Alloy, Surf. Coat. Tech., 2009, 16, p 2288–2291.10.1016/j.surfcoat.2009.02.026 ↗
21. M. Fouladi and A. Amadeh, Effect of Phosphating Time and Temperature on Microstructure and Corrosion Behavior of Magnesium Phosphate Coating, Electrochim. Acta, 2013, 106, p 1–12.10.1016/j.electacta.2013.05.041 ↗
22. M. Fouladi and A. Amadeh, Comparative Study Between Novel Magnesium Phosphate and Traditional Zinc Phosphate Coatings, Mater. Lett., 2013, 98, p 1–4.10.1016/j.matlet.2013.01.061 ↗
23. N.V. Phuong and S. Moon, Comparative Corrosion Study of Zinc Phosphate and Magnesium Phosphate Conversion Coatings on AZ31 Mg Alloy, Mater. Lett., 2014, 122, p 341–344.10.1016/j.matlet.2014.02.065 ↗
24. M.R. Dayyari, A. Amadeh and S. Sadreddini, Application of Magnesium Phosphate Coating on Low Carbon Steel via Electrochemical Cathodic Method and Investigation of Its Corrosion Resistance, J. Alloys Compd., 2015, 647, p 956–958.10.1016/j.jallcom.2015.06.063 ↗
25. M.R. Dayyari, A. Amadeh and S. Sadreddini, The Influence of Direct Current Density on Microstructure and corrosion Resistance of Magnesium Phosphate Coating via Cathodic Electrochemical Treatment, Mater. Chem. Phys., 2017, 199, p 537–542.10.1016/j.matchemphys.2017.07.040 ↗
26. E.I. Neacsu, V. Constantin, K. Yanushkevish, A. Galyas, O. Demidenko, J. Calderon-Moreno and A.M. Popescu, Obtaining, Structural, Magnetic and Corrosive Properties of Nd-Fe-B Alloy Thin Films on Glass, Appl. Surf. Sci., 2014, 314, p 30–39.10.1016/j.apsusc.2014.06.143 ↗
27. H. Nan, L. Zhu, H. Liu and W. Li, Protection of NdFeB Magnets by Corrosion Resistance Phytic Acid Conversion Film, Appl. Surf. Sci., 2015, 355, p 1215–1221.10.1016/j.apsusc.2015.07.167 ↗
28. M. Sheng, Y. Wang, Q. Zhong, H. Wu, Q. Zhou and H. Lin, The Effects of Nano-SiO2 Additive on the Zinc Phosphating of Carbon Steel, Surf. Coat. Tech., 2011, 205, p 3455–3460.10.1016/j.surfcoat.2010.12.011 ↗
29. Q. Zhou, J. Jiang, Q. Zhong, Y. Wang, K. Li, and H. Liu, Preparation of Cu-Ni-Fe Alloy Coating and Its Evaluation on Corrosion Behavior in 3.5% NaCl Solution. J. Alloys Compd., 2013, 563, p 171-175.10.1016/j.jallcom.2013.01.136 ↗
30. X. Lu, C. Blawert, Y. Huang, H. Ovri, M.L. Zheludkevich and K.U. Kainer, Plasma Electrolytic Oxidation Coatings on Mg Alloy with Addition of SiO2 Particles, Electrochim. Acta, 2016, 187, p 20–33.10.1016/j.electacta.2015.11.033 ↗
31. X. Leng, Y. Zhang, Q. Zhou, Y. Zhang, Z. Wang, H. Wang and B. Yang, Influence of La Addition on the Semi-conductive Properties of Passive Films Formed on Cu-Ni Alloy, Mater. Res. Express., 2018, 5, p 056513.10.1088/2053-1591/aac277 ↗
32. J. Ni, X. Cui, X. Liu, H. Cui, Z. Xue, Z. Jia, C. Wang, J. Ma and S. Gong, Corrosion Behavior of NdFeB Sintered Magnets in HNO3-HF Acid Mixture Solution, Mater. Chem. Phys., 2015, 162, p 518–524.10.1016/j.matchemphys.2015.06.023 ↗
33. A. Zomorodian, C. Santos, M.J. Carmezim, T.M. Silva, J.C.S. Fernandes and M.F. Montemor, “In-vitro” Corrosion Behaviour of the Magnesium Alloy with Al and Zn (AZ31) Protected with a Biodegradable Polycaprolactone Coating Loaded with Hydroxyapatite and Cephalexin, Electrochim. Acta, 2015, 179, p 431–440.10.1016/j.electacta.2015.04.013 ↗