Mechanical Properties of Nanoparticle-Reinforced Ni-Based Composite Coatings Prepared by Jet Electrodeposition
Source abstract
Abstract
Nanoparticle-reinforced metal matrix composite coating has become the focus of material surface engineering research due to its unique properties. In this study, pure Ni, Ni-Al2O3, Ni-PTFE and Ni-Al2O3-PTFE composite coatings were obtained by jet electrodeposition, and the strengthening function of nanoparticles on pure Ni coating was explored. By designing a combination scheme of the concentration of Al2O3 and PTFE nanoparticles in the electroplating solution, the deposition quality and mechanical properties of Ni-Al2O3-PTFE nanocomposite coating were discussed. The surface morphology, element content, phase structure and related performance of different coatings were detected by scanning electron microscopy (SEM), x-ray diffraction (XRD), ball-plate tribometer, nanoindentation tester and other equipment. The results show that the introduction of nanoparticles significantly improves the comprehensive properties of Ni-based coatings. In addition, with the continuous addition of Al2O3 and PTFE nanoparticles in the plating solution, the wear resistance and toughness of the Ni-Al2O3-PTFE nanocomposite coating appears a variation regulation of first strengthening and then weakening. Under the conditions of 40 mL/L Al2O3 and 10 mL/L PTFE nanoparticles, the average friction coefficient and surface roughness can be as low as 0.09 and 42 nm, respectively, and the elastic recovery ratio can be as high as 0.46. In this moment, the composite coating displays outstanding tribological properties and elastoplastic properties. The implementation of this study is expected to promote the rapid development of the co-deposition of multiple nanoparticles and the performance strengthening process of composite coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Y.Q. Li, X. Meng, R. Li, F.H. Zeng, and Y. Gu, Effect of Ni Content on Microstructure and Performance of Ni/Ceramic Composite Coating, J. Mater. Eng. Perform., 2020, 29, p 2853–2864. https://doi.org/10.1007/s11665-020-04822-w10.1007/s11665-020-04822-w ↗
2. B. Liu, S.M. Yan, Y. He, T. He, Y.H. He, R.X. Song, Z.F. Zhang, H.J. Li, J.X. Song, and Z.Y. Li, Study on Wear Resistance and Corrosion Resistance of Zirconium Phenylphosphonate Reinforced Ni-W Composite Coating, Appl. Surf. Sci., 2022, 603, p 154483. https://doi.org/10.1016/j.apsusc.2022.15448310.1016/j.apsusc.2022.154483 ↗
3. P.C. Huang, K.H. Hou, J.J. Hong, M.H. Lin, and G.L. Wang, Study of Fabrication and Wear Properties of Ni-SiC Composite Coatings on A356 Aluminum Alloy, Wear, 2021, 477, p 203772. https://doi.org/10.1016/j.wear.2021.20377210.1016/j.wear.2021.203772 ↗
4. B.S. Li and W.W. Zhang, Synthesis of Ni-Co-ZrO2 Nanocomposites Doped with Ceria Particles via Electrodeposition as Highly Protective Coating, J. Alloy. Compd., 2020, 820, p 153158. https://doi.org/10.1016/j.jallcom.2019.15315810.1016/j.jallcom.2019.153158 ↗
5. V. Chayeuski, V. Zhylinski, O. Cernashejus, N. Visniakov, and G. Mikalauskas, Structural and Mechanical Properties of the ZrC/Ni-Nanodiamond Coating Synthesized by the PVD and Electroplating Processes for the Cutting Knifes, J. Mater. Eng. Perform., 2019, 28, p 1278–1285. https://doi.org/10.1007/s11665-018-3362-210.1007/s11665-018-3362-2 ↗
6. I. Lopez-Cabanas, J. Llorca, R. González-Arrabal, E.I. Meletis, and J.M. Molina-Aldareguia, High Throughput Optimization of Hard and Tough TiN/Ni Nanocomposite Coatings by Reactive Magnetron Sputter Deposition, Surf. Coat. Tech., 2021, 418, p 127226. https://doi.org/10.1016/j.surfcoat.2021.12722610.1016/j.surfcoat.2021.127226 ↗
7. R.Q. Li, Y.Y. Hou, and J. Liang, Electro-Codeposition of Ni-SiO2 Nanocomposite Coatings from Deep Eutectic Solvent with Improved Corrosion Resistance, Appl. Surf. Sci., 2016, 367, p 449–458. https://doi.org/10.1016/j.apsusc.2016.01.24110.1016/j.apsusc.2016.01.241 ↗
8. C. Lorenzo-Martin, O.O. Ajayi, K. Hartman, S. Bhattacharya, and A. Yacout, Effect of Al2O3 Coating on Fretting Wear Performance of Zr Alloy, Wear, 2019, 426–427, p 219–227. https://doi.org/10.1016/j.wear.2018.12.02410.1016/j.wear.2018.12.024 ↗
9. S. Aslan and E. Duru, Microstructure and Wear Properties of Electrodeposited Ni-B-Al2O3 Composite Coating on Low Carbon Steel at Elevated Temperature, J. Mater. Eng. Perform., 2022, 31, p 1693–1704. https://doi.org/10.1007/s11665-021-06290-210.1007/s11665-021-06290-2 ↗
10. C.A. León-Patiño, J. García-Guerra, and E.A. Aguilar-Reyes, Tribological Characterization of Heat-Treated Ni-P and Ni-P-Al2O3 Composite Coatings by Reciprocating Sliding Tests, Wear, 2019, 426–427, p 330–340. https://doi.org/10.1016/j.wear.2019.02.01510.1016/j.wear.2019.02.015 ↗
11. L. Liu, L.L. Wang, J.L. Pan, Z.Y. Wu, Z.Y. Ye, and C. Wang, Influence of Ceramic Coating Pores on the Tribological Performance of PEO-PTFE Composite Coatings on the Ta-12W Alloy, Surf. Coat. Tech., 2022, 441, p 128592. https://doi.org/10.1016/j.surfcoat.2022.12859210.1016/j.surfcoat.2022.128592 ↗
12. Q.K. Zheng, M. Chhattal, C.N. Bai, Z.W. Zheng, D. Qiao, Z.B. Gong, and J.Y. Zhang, Superlubricity of PTFE Triggered by Green Ionic Liquids, Appl. Surf. Sci., 2023, 614, p 156241. https://doi.org/10.1016/j.apsusc.2022.15624110.1016/j.apsusc.2022.156241 ↗
13. J. Tom, Z.H. Jiao, J.C.F. Lau, and U. Erb, Wear Stability of Superhydrophobic Nano Ni-PTFE Electrodeposits, Wear, 2017, 374–375, p 1–4. https://doi.org/10.1016/j.wear.2016.12.02310.1016/j.wear.2016.12.023 ↗
14. N.P. Wasekar, S.M. Latha, M. Ramakrishna, D.S. Rao, and G. Sundararajan, Pulsed Electrodeposition and Mechanical Properties of Ni-W/SiC Nano-Composite Coatings, Mater. Design, 2016, 112, p 140–150. https://doi.org/10.1016/j.matdes.2016.09.07010.1016/j.matdes.2016.09.070 ↗
15. S. Sharma, S. Sharma, A. Sharma, and V. Agarwala, Co-deposition of Synthesized ZnO Nanoparticles into Ni-P Matrix Using Electroless Technique and Their Corrosion Study, J. Mater. Eng. Perform., 2016, 25, p 4383–4393. https://doi.org/10.1007/s11665-016-2292-010.1007/s11665-016-2292-0 ↗
16. S.J. Qi, X.Y. Li, Z.X. Zhang, and H.S. Dong, Fabrication and Characterisation of Electro-Brush Plated Nickel-Graphene Oxide Nano-Composite Coatings, Thin Solid Films, 2017, 644, p 106–114. https://doi.org/10.1016/j.tsf.2017.06.06410.1016/j.tsf.2017.06.064 ↗
17. W. Jiang, H.G. Li, Y.X. Lao, X. Li, M. Fang, and Y.L. Chen, Synthesis and Characterization of Amorphous NiCoP Alloy Films by Magnetic Assisted Jet Electrodeposition, J. Alloy. Compd., 2022, 910, p 164848. https://doi.org/10.1016/j.jallcom.2022.16484810.1016/j.jallcom.2022.164848 ↗
18. J.K. Liu, L.J. Yang, Z.L. Song, and C. Xu, Microstructures and Capacitance Performance of MnO2 Films Fabricated by Ultrasonic-Assisted Electrodeposition, Appl. Surf. Sci., 2019, 478, p 94–102. https://doi.org/10.1016/j.apsusc.2019.01.20510.1016/j.apsusc.2019.01.205 ↗
19. D.D. Ning, A. Zhang, M. Murtaza, and H. Wu, Effect of Surfactants on the Electrodeposition of Cu-TiO2 Composite coatings Prepared by Jet Electrodeposition, J. Alloy. Compd., 2019, 777, p 1245–1250. https://doi.org/10.1016/j.jallcom.2018.11.07710.1016/j.jallcom.2018.11.077 ↗
20. M.S. Rajput, P.M. Pandey, and S. Jha, Micromanufacturing by Selective Jet Electrodeposition Process, Int. J. Adv. Manuf. Tech., 2015, 76, p 61–67. https://doi.org/10.1007/s00170-013-5470-310.1007/s00170-013-5470-3 ↗
21. L.L. Ji, F.D. Chen, H. Huang, X.Y. Sun, Y.Y. Yan, and X.B. Tang, Preparation of Nickel-Graphene Composites by Jet Electrodeposition and the Influence of Graphene Oxide Concentration on the Morphologies and Properties, Surf. Coat. Tech., 2018, 351, p 212–219. https://doi.org/10.1016/j.surfcoat.2018.07.08310.1016/j.surfcoat.2018.07.083 ↗
22. X.Q. Fu, J. Li, H.W. Zhang, and J.Y. Xian, Simulation and Experimental Research on Nickel-Based Coating Prepared by jet Electrodeposition at Different Scanning Speeds, Int. J. Adv. Manuf. Tech., 2022, 121, p 1851–1866. https://doi.org/10.1007/s00170-022-09308-810.1007/s00170-022-09308-8 ↗
23. Y.H. Wang, L.D. Shen, M.B. Qiu, Z.J. Tian, X. Liu, and W. Zhuo, Jet Electrodeposition of Ni-SiO2 Nanocomposite Coatings with Online Friction and Its Performance, J. Electrochem. Soc., 2016, 163, p D579–D584. https://doi.org/10.1149/2.0241610jes10.1149/2.0241610jes ↗
24. C.M. Pacheco, B.A. Cecilia, G. Reyes, C. Oviedo, A. Fernandez-perez, M. Elso, and O.J. Rojas, Nanocomposite Additive of SiO2/TiO2/Nanocellulose on Waterborne Coating Formulations for Mechanical and Aesthetic Properties Stability on Wood, Mater. Today Commun., 2021, 29, p 102990. https://doi.org/10.1016/j.mtcomm.2021.10299010.1016/j.mtcomm.2021.102990 ↗
25. Y.L. Yuan, Y.Y. Li, X.M. Zhou, M. You, Y. Zhang, and Z.G. Li, Effects of Ti Addition on Microstructure and Tribological Properties of in situ Composite Carbide Coating WC-TiC/FeNi Fabricated by Plasma Transferred Arc Metallurgical Reaction, J. Mater. Eng. Perform., 2020, 29, p 8093–8106. https://doi.org/10.1007/s11665-020-05275-x10.1007/s11665-020-05275-x ↗
26. Y.K. Xu, M.Y. Fan, Y.Q. Luo, Y.N. Chen, J.M. Hao, and X.H. Hou, Tribology and Corrosion Properties Investigation of a Pulse Electrodeposition Duplex Hard-Particle-Reinforced Ni-Mo Nanocomposite Coating, Surf. Coat. Tech., 2020, 393, p 125797. https://doi.org/10.1016/j.surfcoat.2020.12579710.1016/j.surfcoat.2020.125797 ↗
27. W. Jiang, L.D. Shen, Z.W. Wang, K. Wang, M.Y. Xu, and Z.J. Tian, Wear Resistance of a Ni-PTFE Composite Coating Strengthened with Nano-SiC Particles, Mater. Res. Express, 2019, 6, p 096443. https://doi.org/10.1088/2053-1591/ab320b10.1088/2053-1591/ab320b ↗
28. C.H. Ng, J. Rao, and J. Nicholls, The Role of PVD Sputtered PTFE and Al2O3 Thin Films in the Development of Damage Tolerant Coating Systems, J. Mater. Res. Technol., 2020, 9, p 675–686. https://doi.org/10.1016/j.jmrt.2019.11.00910.1016/j.jmrt.2019.11.009 ↗
29. A.G. Tang, M.L. Wang, W. Huang, and X.L. Wang, Composition Design of Ni-Nano-Al2O3-PTFE Coatings and Their Tribological Characteristics, Surf. Coat. Tech., 2015, 282, p 121–128. https://doi.org/10.1016/j.surfcoat.2015.10.03410.1016/j.surfcoat.2015.10.034 ↗
30. F. Sourani, K. Raeissi, M.H. Enayati, M. Kharaziha, A. Hakimizad, G. Blugan, and H.R. Salimijazi, Corrosion and Tribocorrosion Behavior of ZrO2-Al2O3 Composite Coatings Developed by Plasma Electrolytic Oxidation for Load-Bearing Implants, J. Alloy. Compd., 2022, 920, p 165856. https://doi.org/10.1016/j.jallcom.2022.16585610.1016/j.jallcom.2022.165856 ↗
31. S. Dehgahi, R. Amini, and M. Alizadeh, Microstructure and Corrosion Resistance of Ni-Al2O3-SiC Nanocomposite Coatings Produced by Electrodeposition Technique, J. Alloy. Compd., 2017, 692, p 622–628. https://doi.org/10.1016/j.jallcom.2016.08.24410.1016/j.jallcom.2016.08.244 ↗
32. Y. Wang, J. Ghanbaja, P. Boulet, D. Horwat, and J.F. Pierson, Growth, Interfacial Microstructure and Optical Properties of NiO Thin Films with Various Types of Texture, Acta Mater., 2019, 164, p 648–653. https://doi.org/10.1016/j.actamat.2018.11.01810.1016/j.actamat.2018.11.018 ↗
33. L. Chen, L.P. Wang, Z.X. Zeng, and T. Xu, Influence of Pulse Frequency on the Microstructure and Wear Resistance of Electrodeposited Ni-Al2O3 Composite Coatings, Surf. Coat. Tech., 2006, 201, p 599–605. https://doi.org/10.1016/j.surfcoat.2005.12.00810.1016/j.surfcoat.2005.12.008 ↗
34. N. Guglielmi, Kinetics of the Deposition of Inert Particles from Electrolytic Baths, J. Electrochem. Soc., 1972, 119, p 1009–1012. https://doi.org/10.1149/1.240438310.1149/1.2404383 ↗
35. V. Sharma and S. Kazi, An Investigation on D-Gun Sprayed Al2O3-SiC Coatings, Surf. Coat. Tech., 2019, 375, p 303–314. https://doi.org/10.1016/j.surfcoat.2019.07.02110.1016/j.surfcoat.2019.07.021 ↗
36. S. Pinate and C. Zanella, Wear Behavior of Ni-Based Composite Coatings with Dual Nano-SiC: Graphite Powder Mix, Coatings, 2020, 10, p 1060. https://doi.org/10.3390/coatings1011106010.3390/coatings10111060 ↗
37. R. Menini and M. Farzaneh, Elaboration of Al2O3/PTFE Icephobic Coatings for Protecting Aluminum Surfaces, Surf. Coat. Tech., 2009, 203, p 1941–1946. https://doi.org/10.1016/j.surfcoat.2009.01.03010.1016/j.surfcoat.2009.01.030 ↗
38. P.J. Blau, Interpretations of the Friction and Wear Break-in Behavior of Metals in Sliding Contact, Wear, 1981, 71, p 29–43. https://doi.org/10.1016/0043-1648(81)90137-X10.1016/0043-1648(81)90137-X ↗
39. Y.F. Li, Z.J. Yang, H.J. Han, M.Y. Liu, M.M. Zhang, Z.K. Wang, and T.T. Wu, Effects of Duty Ratio on Properties of Ni-P-(sol)Al2O3 Coating Prepared by Pulse-Assisted Chemical Deposition, J. Mater. Res. Technol., 2021, 15, p 924–935. https://doi.org/10.1016/j.jmrt.2021.08.07710.1016/j.jmrt.2021.08.077 ↗
40. Y. Liang, Y.S. Li, Q.Y. Yu, Y.X. Zhang, W.J. Zhao, and Z.X. Zeng, Structure and Wear Resistance of High Hardness Ni-B Coatings as Alternative for Cr Coatings, Surf. Coat. Tech., 2015, 264, p 80–86. https://doi.org/10.1016/j.surfcoat.2015.01.01610.1016/j.surfcoat.2015.01.016 ↗