Modified Johnson–Cook Constitutive Model of 18CrNiMo7-6 Alloy Steel under Ultrasonic Surface Burnishing Process
Source abstract
Abstract
In this work, a suitable constitutive model was selected, and its parameters were determined by experiments to investigate the relationship between flow stress and strain during ultrasonic surface burnishing process (USBP). The quasi-static and dynamic mechanical responses of 18CrNiMo7-6 alloy steel were obtained by tensile test and split Hopkinson pressure bar test, respectively. A modified Johnson–Cook (J–C) constitutive model of 18CrNiMo7-6 alloy steel under USBP was established based on test data. This modified J–C model considers the Voce hardening model to describe the strain hardening term of 18CrNiMo7-6 alloy steel. A nonlinear correction was applied to the strain rate strengthening factor by considering the coupling relationship between strain and strain rate strengthening factor. The modified J–C model exhibited better accuracy and was more suitable for predicting the stress flow behavior of 18CrNiMo7-6 alloy steel during USBP through error assessment between the original model and the modified J–C model.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. J.X. Liu, Z.J. He, L.H. Wang, G.P. Feng, Z.J. Zhang, and L.P. Qiu, Study on the Durable Factors of the Grain Size in 18CrNiMo7-6 by Heating and Cooling Method, Adv. Eng. Mater., 2011, 194, p 228–231.
2. Y.T. Ma, L.D. Zhang, J.C. Liu, and L.R. Liu, Injection Water Jet Peening of Carburised 18CrNiMo7-6 Steel Surfaces, Int. J. Surf. Sci. Eng., 2020, 14, p 48–67.10.1504/IJSURFSE.2020.105889 ↗
3. P. Mandal, M. Olasolo, L. Da Silva, and H. Lalvani, Impact of a Multi-Step Heat Treatment on Different Manufacturing Routes of 18CrNiMo7-6 Steel, Metall. Mater. Trans. A, 2020, 51, p 3009–3029.10.1007/s11661-020-05728-x ↗
4. S. Sahu, D.P. Mondal, M.D. Goel, and M.Z. Ansari, Finite Element Analysis of AA1100 Elasto-Plastic Behaviour Using Johnson-Cook Model, Mater. Today. Proc., 2018, 5, p 5349–5353.10.1016/j.matpr.2017.12.120 ↗
5. Z.H. Liu, Q.L. Dai, J. Deng, Y.X. Zhang, and V. Ji, Analytical Modeling and Experimental Verification of Surface Roughness in The Ultrasonic-Assisted Ball Burnishing of Shaft Targets, Int. J. Adv. Manuf. Technol., 2020, 107, p 3593–3613.10.1007/s00170-020-05261-6 ↗
6. T. Wang, D.P. Wang, G. Liu, B.M. Gong, and N.X. Song, Investigations on the Nanocrystallization of 40Cr Using Ultrasonic Surface Rolling Processing, Appl. Surf. Sci., 2018, 255, p 1824–1829.
7. R. Teimouri, S. Amini, and M. Guagliano, Analytical Modeling Ultrasonic Burnishing Process: Evaluation of Residual Stress Field Distribution and Strip Deflection, Mat. Sci. Eng. A Struct., 2019, 747, p 208–224.10.1016/j.msea.2019.01.007 ↗
8. M. Zhang, Y.X. Zhang, and Y. Zhou, Theoretical and Experimental Analysis of Compressive Residual Stress Field on 6061 Aluminum Alloy After Ultrasonic Surface Rolling Process, P I Mech. Eng. C-J Mec, 2019, 233, p 5363–5376.10.1177/0954406219850218 ↗
9. V. Gupta, S.K. Rajput, Y. Mehta, S.K. Soni, and T. Soota, Modeling of Hot Deformation Behavior of High Phosphorus Steel Using Johnson-Cook Model, ICCRME, 2018, 404, p 012015.
10. G.R. Johnson and W.H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains High Strain Rates and High Temperature, Eng. Fract. Mech., 1983, 21, p 541–547.
11. S. Rasaee and A.H. Mirzaei, Constitutive Modeling of 2024 Aluminum Alloy Based on The Johnson-Cook Model, Trans. Indian Inst. Met., 2019, 72, p 1023–1030.10.1007/s12666-019-01576-5 ↗
12. Y.C. Lin, X.M. Chen, and G. Liu, A Modified Johnson-Cook Model for Tensile Behaviors of Typical High-Strength Alloy Steel, Mat. Sci. Eng. A. Struct., 2010, 527, p 6980–6986.10.1016/j.msea.2010.07.061 ↗
13. L.N. Zhang, P.N. Li, S.W. Tang, W.B. Tang, and S. Zhang, Mechanical Behaviors Analysis and Johnson-Cook Model Establishment of 4Cr13 Stainless Steel, Int. J. Adv. Manuf. Technol., 2014, 589, p 45–51.
14. K.B. Park, Y.T. Cho, and Y.G. Jung, Determination of Johnson-Cook Constitutive Equation for Inconel 601, J Mech Sci Technol, 2018, 32, p 1569–1574.10.1007/s12206-018-0311-9 ↗
15. Y.C. Lin, Q.F. Li, Y.C. Xia, and L.T. Li, A Phenomenological Constitutive Model for High Temperature Flow Stress Prediction of Al-Cu-Mg Alloy, Mater Sci Eng A-Struct, 2012, 534, p 654–662.10.1016/j.msea.2011.12.023 ↗
16. Y.C. Lin, L.T. Li, Y.X. Fu, and Y.Q. Jiang, Hot Compressive Deformation Behavior of 7075 Al Alloy Under Elevated Temperature, J Mater Sci, 2012, 47, p 1306–1318.10.1007/s10853-011-5904-y ↗
17. J. Cai, K.S. Wang, P. Zhai, F.G. Li, and J. Yang, A Modified Johnson-Cook Constitutive Equation to Predict Hot Deformation Behavior of Ti-6Al-4V Alloy, J Mater Eng Perform, 2015, 24, p 32–44.10.1007/s11665-014-1243-x ↗
18. Y.B. Zhang, S. Yao, X. Hong, and Z.G. Wang, A modified Johnson-Cook Model for 7N01 Aluminum Alloy Under Dynamic Condition, J Cent South Univ, 2017, 24, p 2550–2555.10.1007/s11771-017-3668-5 ↗
19. Y.C. Lin, L.T. Li, and Y.Q. Jiang, A Phenomenological Constitutive Model for Describing Thermo-Viscoplastic Behavior of Al-Zn-Mg-Cu Alloy Under Hot Working Condition, Exp Mech, 2012, 52, p 993–1002.10.1007/s11340-011-9546-4 ↗
20. S.X. Wang, Y.C. Huang, Z.B. Xiao, Y. Liu, and H. Liu, A Modified Johnson-Cook Model For Hot Deformation Behavior Of 35crmo Steel, Metals-Basel, 2017, 7, p 337.10.3390/met7090337 ↗
21. G.Q. Geng, D.H. Ding, L.B. Duan and H.B. Jiang, A Modified Johnson–Cook Model of 6061-T6 Aluminium Profile. Aust. J. Mech. Eng. (2020)10.1080/14484846.2020.1721966 ↗
22. M. Abouridouane, G. Laschet, V. Kripak, A. Texeira, J. Dierdorf, U. Prahl, and F. Klocke, Cutting Simulations Of Two Gear Steels With Microstructure Dependent Material Laws, 16th CIRP CMMO, 58, 549–554 (2017)10.1016/j.procir.2017.03.332 ↗
23. G.T. Xu, B. Su, Y.K. Qiao, G. Wang, and M.H. Zhao, Characterization of the Plasticity Parameters of the Surface-Modified Layer of 18CrNiMo7-6 Alloy Steel After Carburizing Heat Treatment Through the Indentation Method, J Mater Res Technol, 2021, 12, p 2307–2316.10.1016/j.jmrt.2021.04.028 ↗
24. X.J. Wang, F. Jiang, T. Zhang, and L.P. Wang, Study on Dynamic Mechanical Properties and Constitutive Model of B-10/Al Composite Compared with its Matrix of High-Purity Aluminum, J Mater Sci, 2019, 55, p 748–761.10.1007/s10853-019-03949-z ↗
25. Y.X. Li, Y. Li, M.S. Yang, F.Z. Wei, Q.L. Yuan, and F.K. Cui, Determination of 40Cr Johnson-Cook Dynamic Constitutive Equation for Cold Roll-Beating Forming Process, Int. Conf. Appl. Eng. Manag., 2015, 46, p 1159–1164.
26. F. Jiang, X.S. Luan, N.C. Wang, X.P. Xu, X.Z. Lu, and Q.L. Wen, Research on the Dynamic Mechanical Properties of C-Plane Sapphire Under Impact Loading, Ceram. Int., 2018, 44, p 9839–9847.10.1016/j.ceramint.2018.02.227 ↗
27. Y. Liu, X.H. Zhao, and D.P. Wang, Effective FE Model to Predict Surface Layer Characteristics of Ultrasonic Surface Rolling with Experimental Validation, Mater. Sci. Technol., 2014, 30, p 627–636.10.1179/1743284713Y.0000000396 ↗
28. L. Lin, X.D. Zhi, F. Fan, S.J. Meng, and J.J. Su, Determination of Parameters of Johnson-Cook Models of Q235B Steel, J. Vib. Shock, 2014, 33, p 153–158.
29. J.X. Liu, M. Zhao, G.P. Feng, Z.G. Zhao, L.J. Cheng, and Z.Y. Yu, Effect of Ingot Heating and Forged Products Heat Treatment Process on Banded-Structure of $$\varnothing$$ 540mm Bar of Steel 18CrNiMo7-6, Special Steel. 36, 62–63 (2015)
30. J.H. Lee, K.S. Kim, J.B. Lee, Y.S. Yang, and M.J. Yoo, A numerical simulation Model of Cyclic Hardening Behavior of AC4C-T6 for LNG Cargo Pump Using Finite Element Analysis, J. Loss Prev. Proc., 2009, 22, p 889–896.10.1016/j.jlp.2009.08.021 ↗
31. J.F. Chen, Z.P. Guan, and C.H. Yang, Inverse Determination of the Flow Curve in Large Range of Strains for Cylindrical Tensile Specimen, P I Mech. Eng. C-J Mech., 2020, 234, p 2256–2265.10.1177/0954406220904118 ↗
32. H.Y. Li, X.F. Wang, J.Y. Duan, and J.J. Liu, A Modified Johnson-Cook Model for Elevated Temperature Flow Behavior of T24 Steel, Mater. Sci. Eng. A-Struct., 2013, 577, p 138–146.10.1016/j.msea.2013.04.041 ↗