Effect of Natural Aging on Mechanical Properties of 3D-Printed Acrylonitrile Styrene Acrylate for Outdoor Applications
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Photopolymerization techniques and applications · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. R.K. Upadhyay, A.K. Mishra, and A. Kumar, Mechanical Degradation of 3D Printed PLA in Simulated Marine Environment, Surfaces and Interfaces., 2020, 21, p 100778. https://doi.org/10.1016/j.surfin.2020.10077810.1016/j.surfin.2020.100778 ↗
2. J.E. Pickett, O. Kuvshinnikova, L.P. Sung, and B.D. Ermi, Accelerated Weathering Parameters for Some Aromatic Engineering Thermoplastics, Polym. Degrad. Stab., 2019, 166, p 135–144. https://doi.org/10.1016/j.polymdegradstab.2019.05.02810.1016/j.polymdegradstab.2019.05.028 ↗
3. F.F. Yildirim, A. Sezer Hicyilmaz, and K. Yildirim, The Effects of the Weathering Methods on the Properties of the ABS, ASA and PMMA Polymers. Polym. Test., 2022, 107, p 107484. https://doi.org/10.1016/j.polymertesting.2022.10748410.1016/j.polymertesting.2022.107484 ↗
4. J. Sedlak, Z. Joska, J. Jansky, J. Zouhar, S. Kolomy, M. Slany, A. Svasta, and J. Jirousek, Analysis of the Mechanical Properties of 3D-Printed Plastic Samples Subjected to Selected Degradation Effects, Materials (Basel), 2023 https://doi.org/10.3390/ma1608326810.3390/ma16083268 ↗
5. S.F. Iftekar, A. Aabid, A. Amir, and M. Baig, Advancements and Limitations in 3D Printing Materials and Technologies: A Critical Review, Polymers (Basel)., 2023 https://doi.org/10.3390/polym1511251910.3390/polym15112519 ↗
6. H. Wu, W.P. Fahy, S. Kim, H. Kim, N. Zhao, L. Pilato, A. Kafi, S. Bateman, and J.H. Koo, Recent Developments in Polymers/Polymer Nanocomposites for Additive Manufacturing, Prog. Mater. Sci., 2020, 111, p 100638. https://doi.org/10.1016/j.pmatsci.2020.10063810.1016/j.pmatsci.2020.100638 ↗
7. V. Francis and P.K. Jain, Advances in Nanocomposite Materials for Additive Manufacturing, Int. J. Rapid Manuf., 2015, 5, p 215–233.10.1504/IJRAPIDM.2015.074804 ↗
8. S.K. Gawali, G.C. Pandey, and P.K. Jain, Experimental Investigations on Effect of Graphite Loading on Melt Flow Behaviour of ABS-Gr Composite for Fused Filament Fabrication (FFF) Process, Adv. Mater. Process. Technol., 2022 https://doi.org/10.1080/2374068X.2022.209300410.1080/2374068X.2022.2093004 ↗
9. A. Moetazedian, A. Gleadall, X. Han, and V.V. Silberschmidt, Effect of Environment on Mechanical Properties of 3D Printed Polylactide for Biomedical Applications, J. Mech. Behav. Biomed. Mater., 2020, 102, p 103510. https://doi.org/10.1016/j.jmbbm.2019.10351010.1016/j.jmbbm.2019.103510 ↗
10. D. Popescu, F. Baciu, D. Vlăsceanu, C.M. Cotruţ, and R. Marinescu, Effects of Multiple Sterilizations and Natural Aging on the Mechanical Behavior of 3D-Printed ABS, Mech. Mater., 2020 https://doi.org/10.1016/j.mechmat.2020.10342310.1016/j.mechmat.2020.103423 ↗
11. A.D. Banjo, V. Agrawal, M.L. Auad, and A.D.N. Celestine, Moisture-Induced Changes in the Mechanical Behavior of 3D Printed Polymers, Compos. Part C Open Access., 2022, 7, p 100243. https://doi.org/10.1016/j.jcomc.2022.10024310.1016/j.jcomc.2022.100243 ↗
12. B. Chaudhary, H. Li, and H. Matos, Long-Term Mechanical Performance of 3D Printed Thermoplastics in Seawater Environments, Results Mater., 2023, 17, p 100381. https://doi.org/10.1016/j.rinma.2023.10038110.1016/j.rinma.2023.100381 ↗
13. A. Bagsik, V. Schöppner, E. Klemp, Long-Term Ageing Effects on Fused Deposition Modeling Parts Manufactured with Ultem*9085, in 23rd Annual International Solid Freeform Fabrication Symposium: An Additive Manufacturing Conference SFF 2012, p 629–640 (2012).
14. C.G. Amza, A. Zapciu, F. Baciu, M.I. Vasile, and A.I. Nicoara, Accelerated Aging Effect on Mechanical Properties of Common 3D-Printing Polymers, Polymers (Basel)., 2021, 13, p 1–13. https://doi.org/10.3390/polym1323413210.3390/polym13234132 ↗
15. D. Moreno Nieto, M. Alonso-García, M.A. Pardo-Vicente, and L. Rodríguez-Parada, Product Design by Additive Manufacturing for Water Environments: Study of Degradation and Absorption Behavior of pla and petg, Polymers (Basel), 2021 https://doi.org/10.3390/polym1307103610.3390/polym13071036 ↗
16. E. Kim, Y.J. Shin, and S.H. Ahn, The Effects of Moisture and Temperature on the Mechanical Properties of Additive Manufacturing Components: Fused Deposition Modeling, Rapid Prototyp. J., 2016, 22, p 887–894. https://doi.org/10.1108/RPJ-08-2015-009510.1108/RPJ-08-2015-0095 ↗
17. P. Wady, A. Wasilewski, L. Brock, R. Edge, A. Baidak, C. McBride, L. Leay, A. Griffiths, and C. Vallés, Effect of Ionising Radiation on the Mechanical and Structural Properties of 3D Printed Plastics, Addit. Manuf., 2020, 31, p 100907. https://doi.org/10.1016/j.addma.2019.10090710.1016/j.addma.2019.100907 ↗
18. W.H. Ferrell, C.M. Arndt, and S. TerMaath, Tensile Strength Dependence of FFF Fiber Reinforced ABS on Environmental Conditioning, Mech. Adv. Mater. Struct., 2021, 28, p 2163–2176. https://doi.org/10.1080/15376494.2020.172287010.1080/15376494.2020.1722870 ↗
19. A. Afshar and D. Mihut, Enhancing Durability of 3D Printed Polymer Structures by Metallization, J. Mater. Sci. Technol., 2020, 53, p 185–191. https://doi.org/10.1016/j.jmst.2020.01.07210.1016/j.jmst.2020.01.072 ↗
20. J. Madej, M. Śliwka, and W. Trzcionka, Influence of UV Radiation on the Mechanical Properties of Specimens Printed with the Use of the FDM Technique at Different Density Levels, Fibres Text. East. Eur., 2019, 27, p 78–83. https://doi.org/10.5604/01.3001.0012.999110.5604/01.3001.0012.9991 ↗
21. A. El Magri and S. Vaudreuil, Effects of Physical and Chemical Ageing on 3D Printed Poly (Ether Ether Ketone)/Poly (Ether Imide) [PEEK/PEI] Blend for Aerospace Applications, J. Mater. Sci., 2023, 58, p 1465–1479. https://doi.org/10.1007/s10853-022-08068-w10.1007/s10853-022-08068-w ↗
22. J. LeBlanc, L. Shattuck, E. Warner, C. Javier, I. Chenwi, T. Chu, and A. Shukla, Effect of High Pressure Salt Water Absorption on the Mechanical Characteristics of Additively Manufactured Polymers, Int. J. Light. Mater. Manuf., 2023, 6, p 379–391. https://doi.org/10.1016/j.ijlmm.2022.12.00110.1016/j.ijlmm.2022.12.001 ↗
23. A. Plota, A. Masek, Lifetime Prediction Methods for Degradable.pdf. (2020)
24. J.E. Pickett, Weathering of Plastics, Elsevier Inc., 2018.
25. Y.S. Seo, J.H. Kim, C.K. Kim, and J.K. Keum, Polycarbonate/Acrylonitrile–Styrene–Acrylic Elastomer Terpolymer Blends with Enhanced Interfacial Adhesion and Surface Gloss, J. Appl. Polym. Sci., 2004 https://doi.org/10.1002/app.2167710.1002/app.21677 ↗
26. M. Reza, A. Zolfagharian, M. Jennings, and T. Reinicke, Structural Performance of 3D-Printed Composites under Various Loads and Environmental Conditions, Polym. Test., 2020, 91, 106770. https://doi.org/10.1016/j.polymertesting.2020.10677010.1016/j.polymertesting.2020.106770 ↗
27. X. Zhang and J. Zhang, Effect of Core-Shell Structures of Acrylonitrile–Styrene–Acrylate (ASA) Terpolymer on the Properties of Poly(vinyl chloride) (PVC)/ASA Blends: Miscibility, Toughness, and Heat Resistance, J. Appl. Polym. Sci., 2018, 135, p 1–8. https://doi.org/10.1002/app.4683910.1002/app.46839 ↗
28. Y. Zhang, Y. Xu, Y. Song, and Q. Zheng, Study of Poly(vinyl chloride)/Acrylonitrile-Styrene-Acrylate Blends for Compatibility, Toughness, Thermal Stability and UV Irradiation Resistance, J. Appl. Polym. Sci., 2013, 130, p 2143–2151. https://doi.org/10.1002/app.3940510.1002/app.39405 ↗
29. S. Rimdusit, S. Damrongsakkul, P. Wongmanit, D. Saramas, and S. Tiptipakorn, Characterization of Coconut Fiber-Filled Polyvinyl Chloride/Acrylonitrile Styrene Acrylate Blends, J. Reinf. Plast. Compos., 2011, 30, p 1691–1702. https://doi.org/10.1177/073168441142748410.1177/0731684411427484 ↗
30. R. Qi, C. He, and Q. Jin, Effect of Acrylate-Styrene-Acrylonitrile on the Aging Properties of Eucalyptus/PVC Wood-Plastic Composites, BioResources, 2019, 14, p 9159–9168.10.15376/biores.14.4.9159-9168 ↗
31. S.D. Blazey, Formulation Strategy to Achieve Highly Colorable and Weatherable ASA, Plast. Eng., 2015, 71, p 34–39. https://doi.org/10.1002/j.1941-9635.2015.tb01337.x10.1002/j.1941-9635.2015.tb01337.x ↗
32. C.C. Negrete, Optimization of FDM Parameters for Improving Part Quality, Productivity and Sustainability of the Process Using Taguchi Methodology and Desirability Approach, Prog. Addit. Manuf., 2020 https://doi.org/10.1007/s40964-020-00115-910.1007/s40964-020-00115-9 ↗
33. A. Afshar, R. Wood, Development of Weather-Resistant 3D Printed Structures by Multi-Material Additive Manufacturing (2020).10.3390/jcs4030094 ↗
34. S. Ramírez-Revilla, D. Camacho-Valencia, E.G. Gonzales-Condori, and G. Márquez, Evaluation and Comparison of the Degradability and Compressive and Tensile Properties of 3D Printing Polymeric Materials: PLA, PETG, PC, and ASA, MRS Commun., 2023, 13, p 55–62. https://doi.org/10.1557/s43579-022-00311-410.1557/s43579-022-00311-4 ↗
35. A. Afshar and R. Wood, Development of Weather-Resistant 3D Printed Structures by Multi-material Additive Manufacturing, J. Compos. Sci., 2020 https://doi.org/10.3390/jcs403009410.3390/jcs4030094 ↗
36. T. Tichý, O. Šefl, P. Veselý, T. Cápal, Application Possibilities of Fused Filament Fabrication Technology for High-Voltage and Medium-Voltage Insulation Systems, p 2–7 (2019).
37. B. Xiang, Z. Yang, and J. Zhang, ASA/SEBS/Paraffin Composites as Phase Change Material for Potential Cooling and Heating Applications in Building, Polym. Adv. Technol., 2021, 32, p 420–427. https://doi.org/10.1002/pat.509710.1002/pat.5097 ↗
38. B. Xiang, X. Yin, and J. Zhang, A Novel Cool Material: ASA (Acrylonitrile-Styrene-Acrylate) Matrix Composites with Solar Reflective Inorganic Particles, Compos. Sci. Technol., 2017, 145, p 149–156. https://doi.org/10.1016/j.compscitech.2017.04.00710.1016/j.compscitech.2017.04.007 ↗