DataVXJournal of Materials Engineering and PerformancePaper
journal article·2023-11

Research Progress on Mechanical Properties of 3D Printed Biomedical Titanium Alloys

Ying Sun, Wenchao Hu, Chenliang Wu, Hai Kuang, Jie Wang, Song Zhang, Tingting Yan, Qiang Wang

Journal of Materials Engineering and Performance· Volume 32· Issue 21
Publisher page
Source abstract

Abstract

Titanium alloys as biomaterials with low elastic modulus and excellent biocompatibility have received increasing attention in the medical field. The introduction of porous structure further solves the problem of mismatch of modulus between the implant and natural bone caused by “stress shielding.” 3D printing is one of the most advanced manufacturing technologies that can precisely control porous structures. This paper reviews the research progress of 3D printing titanium alloys, focusing on the basic phases, alloying elements and mechanical properties of titanium alloys, and discusses the effects of defects, microstructures and surface roughness on fatigue properties. The corrosion fatigue behavior of titanium alloy in solution environment is also revealed. Correspondingly, this paper introduces the research progress of mechanical properties of porous titanium alloys, including the influence of structural design, microstructure and surface roughness on fatigue properties. Finally, future development trends and potential research topics are pointed out.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

Metals & alloysBiomaterialsMaterials processing

OpenAlex topics: Additive Manufacturing Materials and Processes · Titanium Alloys Microstructure and Properties · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. X. Zhou, D. Xu, S. Geng, Y. Fan, and F. Wang, Microstructural Evolution and Corrosion Behavior of Ti-6Al-4V Alloy Fabricated by Laser Metal Deposition for Dental Applications, J. Mater. Res. Technol., 2021, 14(2), p 1459–1472. https://doi.org/10.1016/j.jmrt.2021.07.00610.1016/j.jmrt.2021.07.006 ↗
2. X. Zhou, D.K. Xu, S.J. Geng, Y.Q. Fan, M.X. Liu, Q. Wang et al., Mechanical Properties, Corrosion Behavior and Cytotoxicity of Ti-6Al-4V Alloy Fabricated by Laser Metal Deposition, Mater. Charact., 2021, 179, p 111302. https://doi.org/10.1016/j.matchar.2021.11130210.1016/j.matchar.2021.111302 ↗
3. M. Kaur and K. Singh, Review on Titanium and Titanium Based Alloys as Biomaterials for Orthopaedic Applications, Mat. Sci. Eng. C-Mater., 2019, 102, p 844–862. https://doi.org/10.1016/j.msec.2019.04.06410.1016/j.msec.2019.04.064 ↗
4. Y.W. Cui, L.Y. Chen, and X.X. Liu, Pitting Corrosion of Biomedical Titanium and Titanium Alloys: A Brief Review, Curr. Nanosci., 2021, 17(2), p 241–256. https://doi.org/10.2174/157341371699920112522121110.2174/1573413716999201125221211 ↗
5. T.K. Kwon, J.Y. Choi, J.I. Park, and I.S.L. Yeo, A Clue to the Existence of Bonding Between Bone and Implant Surface: An in vivo Study, Materials., 2019, 12(7), p 1187. https://doi.org/10.3390/ma1207118710.3390/ma12071187 ↗
6. M. Sarraf, E.R. Ghomi, S. Alipour, S. Ramakrishna, and N.L. Sukiman, A State-of-the-art Review of the Fabrication and Characteristics of Titanium and its Alloys for Biomedical Applications, Bio Des. Manuf., 2022, 5(2), p 371–395. https://doi.org/10.1007/s42242-021-00170-310.1007/s42242-021-00170-3 ↗
7. H. Koizumi, Y. Takeuchi, H. Imai, T. Kawai, and T. Yoneyama, Application of Titanium and Titanium Alloys to Fixed Dental Prostheses, J. Prosthodont Res., 2019, 63(3), p 266–270. https://doi.org/10.1016/j.jpor.2019.04.01110.1016/j.jpor.2019.04.011 ↗
8. R. Yamanoglu, E. Efendi, F. Kolayli, H. Uzuner, and I. Daoud, Production and Mechanical Properties of Ti-5Al-25Fe-xCu Alloys for Biomedical Applications, Biomed. Mater., 2018, 13(2), p 025013. https://doi.org/10.1088/1748-605X/aa957d10.1088/1748-605X/aa957d ↗
9. M. Niinomi, Recent Progress in Research and Development of Metallic Structural Biomaterials with Mainly Focusing on Mechanical Biocompatibility, Mater. Trans., 2018, 59(1), p 1–13. https://doi.org/10.2320/matertrans.M201718010.2320/matertrans.M2017180 ↗
10. B.Q. Li, C.L. Li, Z.X. Wang, and X. Lu, Preparation of Ti-Nb-Ta-Zr Alloys for Load-bearing Biomedical Applications, Rare Met., 2019, 38(6), p 571–576. https://doi.org/10.1007/s12598-019-01239-w10.1007/s12598-019-01239-w ↗
11. J. Wu, X. Tan, X.G. An, J. Zhang, Y. Guo, J. Liu et al., Development of Biomedical Ti-Nb-Zr-Mn Alloys with Enhanced Mechanical Properties and Corrosion Resistance, Mater. Today Commun., 2022, 30, p 10327. https://doi.org/10.1016/j.mtcomm.2021.10302710.1016/j.mtcomm.2021.103027 ↗
12. Y.X. Yuan, R.D. Luo, J.K. Ren, L. Zhang, Y.H. Jiang, and Z.Y. He, Design of a New Ti-Mo-Cu Alloy with Excellent Mechanical and Antibacterial Properties as Implant Materials, Mater. Lett., 2022, 306, p 130875. https://doi.org/10.1016/j.matlet.2021.13087510.1016/j.matlet.2021.130875 ↗
13. S.M. Ahmadi, G. Campoli, S.A. Yavari, B. Sajadi, and A.A. Zadpoor, Mechanical Behavior of Regular Open-Cell Porous Biomaterials Made of Diamond Lattice Unit Cells, J. Mech. Behav. Biomed. Mater., 2014, 34(6), p 106–115. https://doi.org/10.1016/j.jmbbm.2014.02.00310.1016/j.jmbbm.2014.02.003 ↗
14. R. Wauthle, B. Vrancken, B. Beynaerts, K. Jorissen, J. Schrooten, J.P. Kruth et al., Effects of Build Orientation and Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Lattice Structures, Addit. Manuf., 2015, 5, p 77–84. https://doi.org/10.1016/j.addma.2014.12.00810.1016/j.addma.2014.12.008 ↗
15. Y. Li, C. Yang, H. Zhao, S. Qu, X. Li, and Y. Li, New Developments of Ti-Based Alloys for Biomedical Applications, Materials., 2014, 7(3), p 1709.10.3390/ma7031709 ↗
16. Y. Zhang, S. Attarilar, L. Wang, W. Lu, and Y. Fu, A Review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications, Int. J. Bioprint., 2021, 7(2), p 15–42. https://doi.org/10.18063/ijb.v7i2.34010.18063/ijb.v7i2.340 ↗
17. Y. Xia, C.D. Feng, Y.Z. Xiong, Y. Luo, and X. Li, Mechanical Properties of Porous Titanium Alloy Scaffold Fabricated using Additive Manufacturing Technology, Int. J. Appl. Electrom., 2019, 59(3), p 1087–1095. https://doi.org/10.3233/jae-17119710.3233/jae-171197 ↗
18. Y.H. Li and X.Y. Shang, Recent Progress in Porous TiNb-based Alloys for Biomedical Implant Applications, Mater. Sci. Technol., 2020, 36(4), p 385–392. https://doi.org/10.1080/02670836.2020.172441510.1080/02670836.2020.1724415 ↗
19. Y.T. Zhang, S. Attarilar, L.Q. Wang, W.J. Lu, J.L. Yang, and Y.F. Fu, A review on Design and Mechanical Properties of Additively Manufactured NiTi Implants for Orthopedic Applications, Int. J. Bioprinting., 2021, 7(2), p 15–42. https://doi.org/10.18063/ijb.v7i2.34010.18063/ijb.v7i2.340 ↗
20. X. Zhao, H. Sun, L. Lan, J. Huang, Z. Hua, and W. Yu, Pore Structures of High-Porosity NiTi Alloys Made from Elemental Powders with NaCl Temporary Space-Holders, Mater. Lett., 2009, 63(28), p 2402–2404. https://doi.org/10.1016/j.matlet.2009.07.06910.1016/j.matlet.2009.07.069 ↗
21. N. Mitsuo, Y. Liu, N. Masaki, H. Liu, and L. Hua, Biomedical Titanium Alloys with Young’s Moduli Close to that of Cortical Bone, Regen. Biomater., 2016, 3, p 173–185. https://doi.org/10.1093/rb/rbw01610.1093/rb/rbw016 ↗
22. E.G. Brodie, J. Richter, T. Wegener, T. Niendorf, and A. Molotnikov, Low-Cycle Fatigue Performance of Remelted Laser Powder Bed Fusion (L-PBF) Biomedical Ti25Ta, Mat. Sci. Eng. A-Struct., 2020 https://doi.org/10.1016/j.msea.2020.14022810.1016/j.msea.2020.140228 ↗
23. L.B. Zhou, T.C. Yuan, R.D. Li, J.Z. Tang, G.H. Wang, K.X. Guo et al., Densification, Microstructure Evolution and Fatigue Behavior of Ti-13Nb-13Zr Alloy Processed by Selective Laser Melting, Powder Technol., 2019, 342, p 11–23. https://doi.org/10.1016/j.powtec.2018.09.07310.1016/j.powtec.2018.09.073 ↗
24. M. Amjad, S. Badshah, A.F. Rafique, M.A. Khattak, R.U. Khan, and W.I.A. Harasani, Mechanism of Fatigue Crack Growth in Biomedical Alloy Ti-27Nb, Materials., 2020, 13(10), p 2299. https://doi.org/10.3390/ma1310229910.3390/ma13102299 ↗
25. L.C. Campanelli, A Review on the Recent Advances Concerning the Fatigue Performance of Titanium Alloys for Orthopedic Applications, J. Mater. Res., 2021, 36(1), p 151–165. https://doi.org/10.1557/s43578-020-00087-010.1557/s43578-020-00087-0 ↗
26. N. Singh, P. Hameed, R. Ummethala, G. Manivasagam, K.G. Prashanth, and J. Eckert, Selective Laser Manufacturing of Ti-Based Alloys and Composites: Impact of Process Parameters, Application Trends, and Future Prospects, Mater. Today Adv., 2020, 8, p 100097. https://doi.org/10.1016/j.mtadv.2020.10009710.1016/j.mtadv.2020.100097 ↗
27. S. Attarilar, M. Ebrahimi, F. Djavanroodi, Y.F. Fu, L.Q. Wang, and J.L. Yang, 3D Printing Technologies in Metallic Implants: A Thematic Review on the Techniques and Procedures, Int. J. Bioprinting., 2021, 7(1), p 21–46. https://doi.org/10.18063/ijb.v7i1.30610.18063/ijb.v7i1.306 ↗
28. M.N. Nadagouda, V. Rastogi, and M. Ginn, A Review on 3D Printing Techniques for Medical Applications, Curr. Opin. Chem. Eng., 2020, 28, p 152–157. https://doi.org/10.1016/j.coche.2020.05.00710.1016/j.coche.2020.05.007 ↗
29. W.E. Frazier, Metal Additive Manufacturing: A Review, J. Mater. Eng. Perform., 2014, 23(6), p 1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
30. S.S. Sidhu, H. Singh, and A.H. Gepreel, A Review on Alloy Design, Biological Response, and Strengthening of β-Titanium Alloys as Biomaterials, Mat. Sci. Eng. C Mater., 2021, 121, p 111661–111661. https://doi.org/10.1016/j.msec.2020.11166110.1016/j.msec.2020.111661 ↗
31. S. Bahl, S. Suwas, and K. Chatterjee, Comprehensive Review on Alloy Design, Processing, and Performance of β Titanium Alloys as Biomedical Materials, Int. Mater. Rev., 2021, 66(2), p 114–139. https://doi.org/10.1080/09506608.2020.173582910.1080/09506608.2020.1735829 ↗
32. C. Schmidt, A.A. Ignatius, and L.E. Claes, Proliferation and Differentiation Parameters of Human Osteoblasts on Titanium and Steel Surfaces, J. Biomed. Mater. Res., 2015, 54(2), p 209–215. https://doi.org/10.1002/1097-4636(200102)54:210.1002/1097-4636(200102)54:2 ↗
33. T.S. Jang, D. Kim, G. Han, C.B. Yoon, and H.D. Jung, Powder Based Additive Manufacturing for Biomedical Application of Titanium and its Alloys: A Review, Biomed. Eng. Lett., 2020, 10(4), p 505–516. https://doi.org/10.1007/s13534-020-00177-210.1007/s13534-020-00177-2 ↗
34. M. Niinomi, Mechanical Properties of Biomedical Titanium Alloys, Mat. Sci. Eng. A Struct., 1998, 243(1–2), p 231–236. https://doi.org/10.1016/S0921-5093(97)00806-X10.1016/S0921-5093(97)00806-X ↗
35. L.C. Zhang and L.Y. Chen, A Review on Biomedical Titanium Alloys: Recent Progress and Prospect, Adv. Eng. Mater., 2019, 21(4), p 1801215. https://doi.org/10.1002/adem.20180121510.1002/adem.201801215 ↗
36. L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao, and T.B. Sercombe, Manufacture by Selective Laser Melting and Mechanical Behavior of a Biomedical Ti-24Nb-4Zr-8Sn Alloy, Scr. Mater., 2011, 65(1), p 21–24. https://doi.org/10.1016/j.scriptamat.2011.03.02410.1016/j.scriptamat.2011.03.024 ↗
37. P.F. Santos, M. Niinomi, H.H. Liu, K. Cho, M. Nakai, A. Trenggono et al., Improvement of Microstructure, Mechanical and Corrosion Properties of Biomedical Ti-Mn Alloys by Mo Addition, Mater. Des., 2016, 110, p 414–424. https://doi.org/10.1016/j.matdes.2016.07.11510.1016/j.matdes.2016.07.115 ↗
38. S.H.S.S.S. Sarabjeet and A.G. Mohame, A Review on Alloy Design, Biological Response, and Strengthening of β-Titanium Alloys as Biomaterials, Mat. Sci. Eng. C Mater., 2020, 121, p 111661. https://doi.org/10.1016/j.msec.2020.11166110.1016/j.msec.2020.111661 ↗
39. J.M. Li, J.A. Jansen, X.F. Walboomers, and J. van den Beucken, Mechanical Aspects of Dental Implants and Osseointegration: A Narrative Review, J. Mech. Behav. Biomed. Mater., 2020, 103, p 103574. https://doi.org/10.1016/j.jmbbm.2019.10357410.1016/j.jmbbm.2019.103574 ↗
40. Z. Liu, Z.B. Zhao, J.R. Liu, Q.J. Wang, Z.H. Guo, Z.M. Liu et al., Effects of Solution-Aging Treatments on Microstructure Features, Mechanical Properties and Damage Behaviors of Additive Manufactured Ti-6Al-4V Alloy, Mat. Sci. Eng. A Struct., 2021, 800, p 140380.10.1016/j.msea.2020.140380 ↗
41. Y. Wu, R.L. Fan, X.J. Zhou, and M.H. Chen, Microstructure and Hot Flow Stress at 970 Degrees C of Various Heat-Treated Ti2AlNb Sheets, Rare Met., 2020, 39(6), p 695–706. https://doi.org/10.1007/s12598-020-01408-210.1007/s12598-020-01408-2 ↗
42. P.A. Kobryn and S.L. Semiatin, The Laser Additive Manufacture of Ti-6Al-4V, Jom., 2001, 53(9), p 40–42. https://doi.org/10.1007/s11837-001-0068-x10.1007/s11837-001-0068-x ↗
43. L. Du, G. Qian, L. Zheng, and Y. Hong, Influence of Processing Parameters of Selective Laser Melting on High-Cycle and Very-High-Cycle Fatigue Behaviour of Ti-6Al-4V, Fatigue Fract. Eng. M., 2020, 44(1), p 240–256. https://doi.org/10.1111/ffe.1336110.1111/ffe.13361 ↗
44. L.M. Du, X.N. Pan, G. Qian, L. Zheng, and Y.S. Hong, Crack Initiation Mechanisms under Two Stress Ratios up to Very-high-cycle Fatigue Regime for a Selective Laser Melted Ti-6Al-4V, Int. J. Fatigue., 2021 https://doi.org/10.1016/j.ijfatigue.2021.10629410.1016/j.ijfatigue.2021.106294 ↗
45. U. Segurajauregi, A. Alvarez-Vazquez, M. Muniz-Calvente, I. Urresti and H. Naveiras, Fatigue Assessment of Selective Laser Melted Ti-6Al-4V: Influence of Speed Manufacturing and Porosity, Metals., 2021 https://doi.org/10.3390/met1107102210.3390/met11071022 ↗
46. L.P. Borrego, J.A.M. Ferreira, J.D.M. Costa, C. Capela, and J. de Jesus, A Study of Fatigue Notch Sensibility on Titanium Alloy Ti6Al4V Parts Manufactured by Selective Laser Melting, 22nd European Conference on Fracture (ECF) - Loading and Environmental Effects on Structural Integrity, Aug 26–31, 2018 (Belgrade, SERBIA), 2018, pp 1000–1005. https://doi.org/10.1016/j.prostr.2018.12.186.10.1016/j.prostr.2018.12.186 ↗
47. S. Leuders, M. Vollmer, F. Brenne, T. Troster, and T. Niendorf, Fatigue Strength Prediction for Titanium Alloy Ti6Al4V Manufactured by Selective Laser Melting, Metall. Mater. Trans. A., 2015, 46A(9), p 3816–3823. https://doi.org/10.1007/s11661-015-2864-x10.1007/s11661-015-2864-x ↗
48. H. Gong, K. Rafi, H. Gu, G.D.J. Ram, T. Starr, and B. Stucker, Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting, Mater. Design., 2015, 86, p 545–554. https://doi.org/10.1016/j.matdes.2015.07.14710.1016/j.matdes.2015.07.147 ↗
49. Y.M. Ren, X. Lin, P.F. Guo, H.O. Yang, H. Tan, J. Chen et al., Low Cycle Fatigue Properties of Ti-6Al-4V Alloy Fabricated by High-power Laser Directed Energy Deposition: Experimental and Prediction, Int. J. Fatigue., 2019, 127, p 58–73. https://doi.org/10.1016/j.ijfatigue.2019.05.03510.1016/j.ijfatigue.2019.05.035 ↗
50. S. Zhao, K. Yuan, W. Guo, Y. He, and X. Lin, A Comparative Study of Laser Metal Deposited and Forged Ti-6Al-4V Alloy: Uniaxial Mechanical Response and Vibration Fatigue Properties, Int. J. Fatigue., 2020, 136, p 105629. https://doi.org/10.1016/j.ijfatigue.2020.10562910.1016/j.ijfatigue.2020.105629 ↗
51. H. Ye, F. Le, C. Wei, K. Ye, and G. Wang, Fatigue Crack Growth Behavior of Ti-6Al-4V Alloy Fabricated via Laser Metal Deposition: Effects of Building Orientation and Heat Treatment, J. Alloys Compd., 2021, 868(7), p 159023. https://doi.org/10.1016/j.jallcom.2021.15902310.1016/j.jallcom.2021.159023 ↗
52. P. Edwards and M. Ramulu, Effect of Build Direction on the Fracture Toughness and Fatigue Crack Growth in Selective Laser Melted Ti-6Al-4V, Fatigue Fract. Eng. M., 2015, 38(10), p 1228–1236. https://doi.org/10.1111/ffe.1230310.1111/ffe.12303 ↗
53. K. Cho, R. Kobayashi, J.Y. Oh, H.Y. Yasuda, M. Todai, T. Nakano et al., Influence of Unique Layered Microstructure on Fatigue Properties of Ti-48Al-2Cr-2Nb Alloys Fabricated by Electron Beam Melting, Intermetallics, 2018, 95, p 1–10. https://doi.org/10.1016/j.intermet.2018.01.00910.1016/j.intermet.2018.01.009 ↗
54. S. Huang, P. Kumar, W.Y. Yeong, R.L. Narayan, and U. Ramamurty, Fracture Behavior of Laser Powder Bed Fusion Fabricated Ti41Nb via in-situ Alloying, Acta Mater., 2022 https://doi.org/10.1016/j.actamat.2021.11759310.1016/j.actamat.2021.117593 ↗
55. A. Mohammadhosseini, D. Fraser, S.H. Masood, and M. Jahedi, Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by Electron Beam Melting Process, Mater. Res. Innov., 2013, 17, p 106–112. https://doi.org/10.1179/1432891713z.00000000030210.1179/1432891713z.000000000302 ↗
56. Y.W. Zhai, H. Galarraga, and D.A. Lados, Microstructure, Static Properties, and Fatigue Crack Growth Mechanisms in Ti-6Al-4V Fabricated by Additive Manufacturing: LENS and EBM, Eng. Fail. Anal., 2016, 69, p 3–14. https://doi.org/10.1016/j.engfailanal.2016.05.03610.1016/j.engfailanal.2016.05.036 ↗
57. D. Greitemeier, F. Palm, F. Syassen, and T. Melz, Fatigue Performance of Additive Manufactured TiAl6V4 using Electron and Laser Beam Melting, Int. J, Fatigue., 2017, 94, p 211–217. https://doi.org/10.1016/j.ijfatigue.2016.05.00110.1016/j.ijfatigue.2016.05.001 ↗
58. A. Baca, R. Konecna, G. Nicoletto, and L. Kunz, Influence of Build Direction on The Fatigue Behaviour of Ti6Al4V Alloy Produced by Direct Metal Laser Sintering, 32nd DANUBIA-ADRIA SYMPOSIUM on Advances in Experimental Mechanics (DAS), Sep 22–25, 2015 (Univ Zilina, Zilina, SLOVAKIA), 2016, pp 921–92410.1016/j.matpr.2016.03.021 ↗
59. D.K. Do and P.F. Li, The Effect of Laser Energy Input on the Microstructure, Physical and Mechanical Properties of Ti-6Al-4V Alloys by Selective Laser Melting, Virtual Phys. Prototy., 2016, 11(1), p 41–47. https://doi.org/10.1080/17452759.2016.114221510.1080/17452759.2016.1142215 ↗
60. N. Sanaei and A. Fatemi, Analysis of the Effect of Surface Roughness on Fatigue Performance of Powder Bed Fusion Additive Manufactured Metals, Theor. Appl. Fract. Mec., 2020 https://doi.org/10.1016/j.tafmec.2020.10263810.1016/j.tafmec.2020.102638 ↗
61. M. Elsayed, M. Ghazy, Y. Youssef, and K. Essa, Optimization of SLM Process Parameters for Ti6Al4V Medical Implants, Rapid Prototyping J., 2019, 25(3), p 433–447. https://doi.org/10.1108/rpj-05-2018-011210.1108/rpj-05-2018-0112 ↗
62. N. Sanaei, A. Fatemi, and N. Phan, Defect Characteristics and Analysis of their Variability in Metal L-PBF Additive Manufacturing, Mater. Des., 2019 https://doi.org/10.1016/j.matdes.2019.10809110.1016/j.matdes.2019.108091 ↗
63. J.Z. Zhang and A. Fatemi, Surface Roughness Effect on Multiaxial Fatigue Behavior of Additive Manufactured Metals and its Modeling, Theor. Appl. Fract. Mec., 2019 https://doi.org/10.1016/j.tafmec.2019.10226010.1016/j.tafmec.2019.102260 ↗
64. Y. Bai, X. Gai, S.J. Li, L.C. Zhang, Y.J. Liu, Y.L. Hao et al., Improved Corrosion Behaviour of Electron Beam Melted Ti-6Al-4V Alloy in Phosphate Buffered Saline, Corros. Sci., 2017, 123, p 289–296. https://doi.org/10.1016/j.corsci.2017.05.00310.1016/j.corsci.2017.05.003 ↗
65. N.A.W. Dai, L.C. Zhang, J.X. Zhang, X. Zhang, Q.Z. Ni, Y. Chen et al., Distinction in Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy on Different Planes, Corros. Sci., 2016, 111, p 703–710. https://doi.org/10.1016/j.corsci.2016.06.00910.1016/j.corsci.2016.06.009 ↗
66. C. Fleck and D. Eifler, Corrosion, Fatigue and Corrosion Fatigue Behaviour of Metal Implant Materials, Especially Titanium Alloys, Int. J. Fatigue., 2010, 32(6), p 929–935. https://doi.org/10.1016/j.ijfatigue.2009.09.00910.1016/j.ijfatigue.2009.09.009 ↗
67. J.S. Jesus, L.P. Borrego, J.A.M. Ferreira, J.D. Costa, and C. Capela, Fatigue Crack Growth under Corrosive Environments of Ti-6Al-4V Specimens Produced by SLM, Eng. Fail. Anal., 2020 https://doi.org/10.1016/j.engfailanal.2020.10485210.1016/j.engfailanal.2020.104852 ↗
68. J.W. Chen, C.H. Zhang, F.Q. Zhou, S. Zhang, H.T. Chen, and Q. Wang, Microstructural, Electrochemical and Wear-Corrosion Characterization of TC4–5Cu Alloy Fabricated by Selective Laser Melting, J. Alloys Compd., 2021 https://doi.org/10.1016/j.jallcom.2021.15995310.1016/j.jallcom.2021.159953 ↗
69. N. Koju, S. Niraula, and B. Fotovvati, Additively Manufactured Porous Ti6Al4V for Bone Implants: A Review, Metals., 2022 https://doi.org/10.3390/met1204068710.3390/met12040687 ↗
70. J.P. Wang, Z.F. Bao, C.L. Wu, S. Zhang, N.W. Wang, Q. Wang et al., Progress in Partially Degradable Titanium-Magnesium Composites used as Biomedical Implants, Front. Bioeng. Biotech., 2022 https://doi.org/10.3389/fbioe.2022.99619510.3389/fbioe.2022.996195 ↗
71. S.Y. Liu and Y.C. Shin, Additive Manufacturing of Ti6Al4V Alloy: A Review, Mater. Des., 2019, 164, p 107552. https://doi.org/10.1016/j.matdes.2018.10755210.1016/j.matdes.2018.107552 ↗
72. J.J. Li and D.W. Zuo, Laser Polishing of Additive Manufactured Ti6Al4V Alloy: A Review, Opt. Eng., 2021, 60(2), p 020901. https://doi.org/10.1117/1.Oe.60.2.02090110.1117/1.Oe.60.2.020901 ↗
73. K. Yang, J. Wang, L. Jia, G. Yang, H. Tang, and Y. Li, Additive Manufacturing of Ti-6Al-4V Lattice Structures with High Structural Integrity under Large Compressive Deformation, J. Mater. Sci. Technol., 2019, 35, p 303–308. https://doi.org/10.1016/j.jmst.2018.10.02910.1016/j.jmst.2018.10.029 ↗
74. S.J. Li, Q.S. Xu, Z. Wang, W.T. Hou, Y.L. Hao, R. Yang et al., Influence of Cell Shape on Mechanical Properties of Ti-6Al-4V Meshes Fabricated by Electron Beam Melting Method, Acta Biomater., 2014, 10(10), p 4537–4547. https://doi.org/10.1016/j.actbio.2014.06.01010.1016/j.actbio.2014.06.010 ↗
75. X.Q. Shi, Y.Z. Sun, P.J. Wang, Z.Y. Ma, H.T. Liu, and H.H. Ning, Compression Properties and Optimization Design of SLM Ti6Al4V Square Pore Tissue Engineering Scaffolds, P. I. Mechl. Eng. H, 2021, 235(11), p 1265–1273. https://doi.org/10.1177/0954411921102806110.1177/09544119211028061 ↗
76. F.X. Ren, C.D. Zhang, W.H. Liao, T.T. Liu, D.W. Li, X. Shi et al., Transition Boundaries and Stiffness Optimal Design for multi-TPMS Lattices, Mater. Des., 2021, 210, p 110062. https://doi.org/10.1016/j.matdes.2021.11006210.1016/j.matdes.2021.110062 ↗
77. N. Vanderesse, P. Bocher, N. Nuno, A. Yanez, and L.A. Hof, On the Characterization of Roughness and Geometrical Irregularities of Additively Manufactured Single Titanium-Alloy Struts, Addit. Manuf., 2022, 54, p 102731. https://doi.org/10.1016/j.addma.2022.10273110.1016/j.addma.2022.102731 ↗
78. M.A. Surmeneva, D. Khrapov, K. Prosolov, M. Kozadayeva, A. Koptyug, A. Volkova et al., The Influence of Chemical Etching on Porous Structure and Mechanical Properties of the Ti6AL4V Functionally Graded Porous Scaffolds Fabricated by EBM, Mater. Chem. Phys., 2022 https://doi.org/10.1016/j.matchemphys.2021.12521710.1016/j.matchemphys.2021.125217 ↗
79. E. Pehlivan, J. Dzugan, J. Fojt, R. Sedlacek, S. Rzepa, and M. Daniel, Post-Processing Treatment Impact on Mechanical Properties of SLM Deposited Ti-6Al-4V Porous Structure for Biomedical Application, Materials., 2020 https://doi.org/10.3390/ma1322516710.3390/ma13225167 ↗
80. M. Dziaduszewska and A. Zielinski, Structural and Material Determinants Influencing the Behavior of Porous Ti and its Alloys Made by Additive Manufacturing Techniques for Biomedical Applications, Materials., 2021 https://doi.org/10.3390/ma1404071210.3390/ma14040712 ↗
81. X.N. Huang, L.H. Lang, S.L. Gong, and M.L. Zhao, Effect of Post-Treatment on the Microstructure and Mechanical Properties of Selective Laser Melted Ti6Al4V Lattice Structures, Rapid. Prototyp. J., 2020, 26(9), p 1569–1577. https://doi.org/10.1108/rpj-11-2019-028410.1108/rpj-11-2019-0284 ↗
82. Y.D. Zhang, C.Y. Wang, C.W. Wang, and G. Yang, Study on Porous Ti6Al4V Alloy Formed by Selective Laser Melting and its Heat Treatment, Rare Metal. Mat. Eng., 2022, 51(5), p 1690–1696.
83. G. Yu, Z. Li, S. Li, Q. Zhang, Y. Hua, H. Liu et al., The Select of Internal Architecture for Porous Ti Alloy Scaffold: A Compromise Between Mechanical Properties and Permeability, Mater. Des., 2020, 192, p 108745. https://doi.org/10.1016/j.matdes.2020.10875410.1016/j.matdes.2020.108754 ↗
84. G.S. Yu, Z.B. Li, Y.L. Hua, H. Liu, X.Y. Zhao, W. Li et al., The Effects of Post Heat Treatment on the Microstructural and Mechanical Properties of an Additive-Manufactured Porous Titanium Alloy, Materials, 2020, 13(3), p 593. https://doi.org/10.3390/ma1303059310.3390/ma13030593 ↗
85. W. Yuan, W. Hou, S. Li, Y. Hao, R. Yang, L.C. Zhang et al., Heat Treatment Enhancing the Compressive Fatigue Properties of Open-Cellular Ti-6Al-4V Alloy Prototypes Fabricated by Electron Beam Melting, J. Mater. Sci. Technol., 2018, 34(7), p 1127–1131. https://doi.org/10.1016/j.jmst.2017.12.00310.1016/j.jmst.2017.12.003 ↗
86. M.W. Wu, J.K. Chen, B.H. Lin, and P.H. Chiang, Improved Fatigue Endurance Ratio of Additive Manufactured Ti-6Al-4V Lattice by Hot Isostatic Pressing, Mater. Design., 2017, 134, p 163–170. https://doi.org/10.1016/j.matdes.2017.08.04810.1016/j.matdes.2017.08.048 ↗
87. M.W. Wu, J.K. Chen, M.K. Tsai, P. Wang, T.L. Cheng, B.H. Lin et al., Uniaxial Compression Properties and Compression Fatigue Performance of Selective Laser Melted Ti-6Al-4V Cellular Structure, Met. Mater. Int., 2022, 28(1), p 132–144. https://doi.org/10.1007/s12540-021-01021-710.1007/s12540-021-01021-7 ↗
88. S.M.J. Razavi, G.G. Bordonaro, P. Ferro, J. Torgersen, and F. Berto, Fatigue Behavior of Porous Ti-6Al-4V Made by Laser-Engineered Net Shaping, Materials., 2018 https://doi.org/10.3390/ma1102028410.3390/ma11020284 ↗
89. Y.J. Liu, D.C. Ren, S.J. Li, H. Wang, L.C. Zhang, and T.B. Sercombe, Enhanced Fatigue Characteristics of a Topology-Optimized Porous Titanium Structure Produced by Selective Laser Melting, Addit. Manuf., 2020, 32, p 101060. https://doi.org/10.1016/j.addma.2020.10106010.1016/j.addma.2020.101060 ↗
90. Y.L. Wang, X.S. Chen, C.Y. Zhang, W. Feng, P. Zhang, Y. Chen et al., Studies on the Performance of Selective Laser Melting Porous Dental Implant by Finite Element Model Simulation, Fatigue Testing and in vivo Experiments, P. I. Mech. Eng. H, 2019, 233(2), p 170–180. https://doi.org/10.1177/095441191881611410.1177/0954411918816114 ↗
91. C.N. Kelly, N.T. Evans, C.W. Irvin, S.C. Chapman, K. Gall, and D.L. Safranski, The Effect of Surface Topography and Porosity on the Tensile Fatigue of 3D Printed Ti-6Al-4V Fabricated by Selective Laser Melting, Mat. Sci. Eng. C Mater., 2019, 98, p 726–736. https://doi.org/10.1016/j.msec.2019.01.02410.1016/j.msec.2019.01.024 ↗
92. Y.Z. Xiong, W. Wang, R.N. Gao, H. Zhang, L.L. Dong, J.W. Qin et al., Fatigue Behavior and Osseointegration of Porous Ti-6Al-4V Scaffolds with Dense Core for Dental Application, Mater. Des., 2020, 195, p 108994. https://doi.org/10.1016/j.matdes.2020.10899410.1016/j.matdes.2020.108994 ↗
93. S. Zhao, S.J. Li, S.G. Wang, W.T. Hou, Y. Li, L.C. Zhang et al., Compressive and Fatigue Behavior of Functionally Graded Ti-6Al-4V meshes Fabricated by Electron Beam Melting, Acta Mater., 2018, 150, p 1–15. https://doi.org/10.1016/j.actamat.2018.02.06010.1016/j.actamat.2018.02.060 ↗
94. D. Mahmoud, K.S. Al-Rubaie and M.A. Elbestawi, The Influence of Selective Laser Melting Defects on the Fatigue Properties of Ti-6Al-4 V Porosity Graded Gyroids for Bone Implants, Int. J. Mech. Sci., 2021, 193, p 104. https://doi.org/10.1016/j.ijmecsci.2020.10618010.1016/j.ijmecsci.2020.106180 ↗
95. M. Speirs, B. Van Hooreweder, J. Van Humbeeck, and J.P. Kruth, Fatigue Behaviour of NiTi Shape Memory Alloy Scaffolds Produced by SLM, a Unit Cell Design Comparison, J. Mech. Behav. Biomed. Mater., 2017, 70, p 53–59. https://doi.org/10.1016/j.jmbbm.2017.01.01610.1016/j.jmbbm.2017.01.016 ↗
96. Y.J. Liu, H.L. Wang, S.J. Li, S.G. Wang, W.J. Wang, W.T. Hou et al., Compressive and Fatigue Behavior of Beta-Type Titanium Porous Structures Fabricated by Electron Beam Melting, Acta Mater., 2017, 126, p 58–66. https://doi.org/10.1016/j.actamat.2016.12.05210.1016/j.actamat.2016.12.052 ↗
97. S.M. Ahmadi, R. Kumar, E.V. Borisov, R. Petrov, S. Leeflang, Y. Li et al., From Microstructural Design to Surface Engineering: A Tailored Approach for Improving Fatigue Life of Additively Manufactured Meta-Biomaterials, Acta Biomater., 2019, 83, p 153–166. https://doi.org/10.1016/j.actbio.2018.10.04310.1016/j.actbio.2018.10.043 ↗
98. R. Guo, X. Lei, W. Jie, Y. Rui, and B.Y. Zong, Microstructural Evolution and Mechanical Properties of Powder Metallurgy Ti-6Al-4V Alloy Based on Heat Response, Mat. Sci. Eng. A Struct., 2015, 639(15), p 327–334. https://doi.org/10.1016/j.msea.2015.05.04110.1016/j.msea.2015.05.041 ↗
99. K. Zhang, J. Mei, N. Wain and X. Wu, Effect of Hot-Isostatic-Pressing Parameters on the Microstructure and Properties of Powder Ti-6Al-4V Hot-Isostatically-Pressed Samples, Metall. Mater. Trans. A., 2010, 41(4), p 1033–1045. https://doi.org/10.1007/s11661-009-0149-y10.1007/s11661-009-0149-y ↗
100. E. Brandl, C. Leyens, F. Palm and Iop, Mechanical Properties of Additive Manufactured Ti-6Al-4V Using Wire and Powder Based Processes, International Conference on Trends in Aerospace Manufacturing (TRAM), Sep 09–10, 2009 (Univ Sheffield, Adv Mfg Res Ctr (AMRC), Sheffield, ENGLAND), 201110.1088/1757-899X/26/1/012004 ↗