Investigations on the Mechanical Characteristics of the Stainless Steel 316L Alloy Fabricated by Directed Energy Deposition for Repairing Application
Source abstract
Abstract
The present work aims to adopt the directed energy deposition (DED) technique for repairing the hot rolled steel (HRS) by depositing stainless steel 316L (SS316L) material over the hot rolled steel. The mechanical and microstructural characteristics of the as-built DED sample, HRS sample, and repaired samples are evaluated in the present work. The mechanical characteristics such as microhardness and tensile strength of the repaired samples are studied. A succinct comparison is made between the HRS samples and the as-built DED samples. The ultimate tensile strength of the repaired sample (hybrid sample), HRS sample, and the as-built DED sample is found to be 541, 590, and 598 Mpa, respectively. The DED sample has an average microhardness of 228HV, while the HRS sample has an average microhardness of 215HV, and the average microhardness of the interface region is 236HV. This work clarified the difference in microstructural characteristics of the interface region, as-built DED samples, and HRS samples. The samples repaired by DED process possess required metallurgical bonding, and hence, DED process can be used to repair HRS components.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A. Saboori, A. Aversa, G. Marchese, S. Biamino, M. Lombardi, and P. Fino, Application of Directed Energy Deposition-Based Additive Manufacturing in Repair, Appl. Sci., 2019, 9(16), p 3316. https://doi.org/10.3390/app916331610.3390/app9163316 ↗
2. M. Kumaran, V. Senthilkumar, T. Sathies, and C.T. Justus Panicker, Effect of Heat Treatment on Stainless steel 316L Alloy Sandwich Structure Fabricated Using Directed Energy Deposition and Powder Bed Fusion, Mater. Lett., 2022, 313, p 131766. https://doi.org/10.1016/j.matlet.2022.13176610.1016/j.matlet.2022.131766 ↗
3. A.J. Pinkerton, W. Wang, and L. Li, Component Repair Using Laser Direct Metal Deposition, Proc. Inst. MechE Part B: J. Eng. Manuf., 2008, 222, p 827. https://doi.org/10.1243/09544054JEM100810.1243/09544054JEM1008 ↗
4. X. Zifa and W. Ouyang, Cracks Repairing by Using Laser Additive and Subtractive Hybrid Manufacturing Technology, J. Manuf. Sci. Eng. Mar., 2020, 142(3), p 031006. https://doi.org/10.1115/1.404616110.1115/1.4046161 ↗
5. D.-K. Kim, W. Woo, E.-Y. Kim, and S.-H. Choi, Microstructure and Mechanical Characteristics of Multi-Layered Materials Composed of 316L Stainless Steel and Ferritic Steel Produced by Direct Energy Deposition, J. Alloys Compd., 2019, 774, p 896–907. https://doi.org/10.1016/j.jallcom.2018.09.39010.1016/j.jallcom.2018.09.390 ↗
6. M. Kumaran and V. Senthilkumar, Experimental Characterization of Stainless Steel 316L alloy Fabricated with Combined Powder Bed Fusion and Directed Energy Deposition, Weld World, 2021, 65, p 1373–1388. https://doi.org/10.1007/s40194-021-01117-z10.1007/s40194-021-01117-z ↗
7. Y. Zhong, L.-E. Rännar, L. Liu, A. Koptyug, S. Wikman, J. Olsen, D. Cui, and Z. Shen, Additive Manufacturing of 316L Stainless Steel by Electron Beam Melting for Nuclear Fusion Applications, J. Nucl. Mater., 2017, 486, p 234–245. https://doi.org/10.1016/j.jnucmat.2016.12.04210.1016/j.jnucmat.2016.12.042 ↗
8. X. Yang, W.-J. Ma, Y.-J. Ren, S.-F. Liu, Y. Wang, W.-L. Wang, and H.-P. Tang, Subgrain Microstructures and Tensile Properties of 316L Stainless Steel Manufactured by Selective Laser Melting, J. Iron Steel Res. Int., 2021, 28, p 1159–1167. https://doi.org/10.1007/s42243-021-00561-x10.1007/s42243-021-00561-x ↗
9. K. Lin, Gu. Dongdong, L. Xi, L. Yuan, S. Niu, P. Lv, and Q. Ge, Selective Laser Melting Processing of 316L Stainless Steel: Effect of Microstructural Differences Along Building Direction on Corrosion Behavior, Int. J. Adv. Manuf. Technol., 2019, 104, p 2669–2679. https://doi.org/10.1007/s00170-019-04136-910.1007/s00170-019-04136-9 ↗
10. C. Zhou, J. Wang, H. Shiyin, H. Tao, B. Fang, L. Li, J. Zheng, and L. Zhang, Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment, J. Electrochem. Soc., 2020, 167, p 141504. https://doi.org/10.1149/1945-7111/abc10e10.1149/1945-7111/abc10e ↗
11. K. Chadha, Y. Tian, J. Spray, and C. Aranas, Microtextural Characterization of Additively Manufactured SS316L After Hot Isostatic Pressing Heat Treatment, Met. Mater. Int., 2022, 28, p 237–249. https://doi.org/10.1007/s12540-021-01046-y10.1007/s12540-021-01046-y ↗
12. L. Wang, J. Xue, and Q. Wang, Correlation Between Arc mode, Microstructure, and Mechanical Properties during Wire Arc Additive Manufacturing of 316L Stainless Steel, Mater. Sci. Eng., A, 2019, 751, p 183–190. https://doi.org/10.1016/j.msea.2019.02.07810.1016/j.msea.2019.02.078 ↗
13. X.-H. Chen, Xu. Bo Chen, G.-C. Cheng, and Z. Huang, Microstructure and Properties of Hybrid Additive Manufacturing 316L Component by Directed Energy Deposition and Laser Remelting, J. Iron Steel Res. Int., 2020, 27, p 842–848. https://doi.org/10.1007/s42243-020-00396-y10.1007/s42243-020-00396-y ↗
14. O. Wook Jin, W.J. Lee, M.S. Kim, J.B. Jeon, and D.S. Shim, Repairing Additive-Manufactured 316L Stainless Steel Using Direct Energy Deposition, Opt. Laser Technol., 2019, 117, p 6–17. https://doi.org/10.1016/j.optlastec.2019.04.01210.1016/j.optlastec.2019.04.012 ↗
15. S. Shrestha, R.P. Panakarajupally, and M. Kannan, Gregory Morscher, Andrew L. Gyekenyesi, Onome E. Scott-Emuakpor, Analysis of Microstructure and Mechanical Properties of Additive Repaired Ti–6Al–4V by Direct Energy Deposition, Mater. Sci. Eng. A., 2021, 806, p 140604. https://doi.org/10.1016/j.msea.2020.14060410.1016/j.msea.2020.140604 ↗
16. J. Chi, Z. Cai, H. Zhang, H. Zhang, W. Guo, Z. Wan, G. Han, P. Peng, and Z. Zeng, Combining Manufacturing of Titanium Alloy through Direct Energy Deposition and Laser Shock Peening Processes, Mater. Des., 2021, 203, p 109626. https://doi.org/10.1016/j.matdes.2021.10962610.1016/j.matdes.2021.109626 ↗
17. Z.D. Wang, G.F. Sun, M.Z. Chen, Y. Lu, S.B. Zhang, H.F. Lan, K.D. Bi, and Z.H. Ni, Investigation of the Underwater Laser Directed Energy Deposition Technique for the On-Site Repair of HSLA-100 Steel with Excellent Performance, Addit. Manuf., 2021, 39, p 101884. https://doi.org/10.1016/j.addma.2021.10188410.1016/j.addma.2021.101884 ↗
18. X. Li, Q. Han, and G. Zhang, Large-Size Sprocket Repairing Based on Robotic GMAW Additive Manufacturing, WELD, World, 2021, 65, p 793–805. https://doi.org/10.1007/s40194-021-01080-910.1007/s40194-021-01080-9 ↗
19. X. Zhang, L. Li, and F. Liou, Additive Manufacturing of Stainless Steel—Copper Functionally Graded Materials via Inconel 718 Interlayer, J. Mater. Res. Technol., 2021, 15, p 2045–2058. https://doi.org/10.1016/j.jmrt.2021.09.02710.1016/j.jmrt.2021.09.027 ↗
20. S. Gao, R. Liu, X. Rui Huang, and M.S. Song, A Hybrid Directed Energy Deposition Process to Manipulate Microstructure and Properties of Austenitic Stainless Steel, Mater. Design, 2022, 213, p 110360. https://doi.org/10.1016/j.matdes.2021.11036010.1016/j.matdes.2021.110360 ↗
21. L. Simoneau, A. Bois-Brochu, and C. Blais, Tensile Properties of Built and Rebuilt/Repaired Specimens of 316L Stainless Steel Using Directed Energy Deposition, J. Mat. Eng. Perfo., 2020, 29, p 6139–6146. https://doi.org/10.1007/s11665-020-05087-z10.1007/s11665-020-05087-z ↗
22. C. Barr, R.A.R. Rashid, S. Da Sun, M. Easton, S. Palanisamy, N. Orchowski, N. Matthews, K. Walker, and M. Brandt, Role of Deposition Strategy and Fill Depth on the Tensile and Fatigue Performance of 300 M Repaired through Laser Directed Energy Deposition, Int. J. Fatig., 2021, 146, p 106135. https://doi.org/10.1016/j.ijfatigue.2020.10613510.1016/j.ijfatigue.2020.106135 ↗
23. Y. Balit, L.-R. Joly, F. Szmytka, S. Durbecq, and E. Charkaluk, Andrei Constantinescu, Self-Heating Behavior during Cyclic Loadings of 316L Stainless Steel Specimens Manufactured or Repaired by Directed Energy Deposition, Mater. Sci. Eng. A., 2020, 786, p 139476. https://doi.org/10.1016/j.msea.2020.13947610.1016/j.msea.2020.139476 ↗
24. Z. Tong, X. Ren, J. Jiao, W. Zhou, Y. Ren, and Y. Ye, Enoch Asuako Larson, Jiayang Gu, Laser Additive Manufacturing of FeCrCoMnNi High-Entropy Alloy: Effect of Heat Treatment on Microstructure, Residual Stress and Mechanical Property, J. Alloys Compd., 2019, 785, p 1144–1159. https://doi.org/10.1016/j.jallcom.2019.01.21310.1016/j.jallcom.2019.01.213 ↗
25. D.R. Feenstra, V. Cruz, X. Gao, A. Molotnikov, and N. Birbilis, Effect of Build Height on the Properties of Large Format Stainless Steel 316L Fabricated via Directed Energy Deposition, Addit. Manufact., 2020, 34, p 101205. https://doi.org/10.1016/j.addma.2020.10120510.1016/j.addma.2020.101205 ↗
26. P. Kumar, Z. Zhu, S.M.L. Nai, R.L. Narayan, and U. Ramamurty, Fracture Toughness of 304L Austenitic Stainless Steel Produced by Laser Powder Bed fusion, Scripta Mater., 2021, 202, p 114002. https://doi.org/10.1016/j.scriptamat.2021.11400210.1016/j.scriptamat.2021.114002 ↗
27. I. Carneiro and S. Simoes, Recent Advances in EBSD Characterization of Metals, Metals, 2020, 10(8), p 1097. https://doi.org/10.3390/met1008109710.3390/met10081097 ↗
28. A. Saboori, G. Piscopo, M. Lai, A. Salmi, and S. Biamino, An Investigation on the Effect of Deposition Pattern on the Microstructure, Mechanical Properties and Residual Stress of 316L Produced by Directed Energy Deposition, Mat. Sci. Eng. A., 2020, 780, p 139179. https://doi.org/10.1016/j.msea.2020.13917910.1016/j.msea.2020.139179 ↗
29. Y. Balit, C. Guevenoux, A. Tanguy, M.V. Upadhyay, E. Charkaluk, and A. Constantinescu, High Resolution Digital Image Correlation for Microstructural Strain Analysis of a Stainless Steel Repaired by Directed Energy Deposition, Mater. Lett., 2020, 270, p 127632. https://doi.org/10.1016/j.matlet.2020.12763210.1016/j.matlet.2020.127632 ↗
30. M. Kumaran, V. Senthilkumar, C.T. Justus Panicker, and R. Shishir, Investigating the Residual Stress in Additive Manufacturing of Combined Process in powder Bed Fusion and Directed Energy Deposition, Mater. Today: Proc., 2021, 47, p 4387–4390. https://doi.org/10.1016/j.matpr.2021.05.20010.1016/j.matpr.2021.05.200 ↗
31. M. Kumaran and V. Senthilkumar, Influence of Heat Treatment on Stainless Steel 316L Alloy Manufactured by Hybrid Additive Manufacturing Using Powder Bed Fusion and Directed Energy Deposition, Metals Mater. Int., 2022 https://doi.org/10.1007/s12540-022-01225-510.1007/s12540-022-01225-5 ↗
32. H. Jia, H. Sun, H. Wang, Wu. Yi, and H. Wang, Scanning Strategy in Selective Laser Melting (SLM): A Review, Int. J. Adv. Manufact. Technol., 2021, 113(9), p 2413–2435. https://doi.org/10.1007/s00170-021-06810-310.1007/s00170-021-06810-3 ↗
33. M. Kumaran and V. Senthilkumar, Generative Design and Topology Optimization of Analysis and Repair Work of Industrial Robot Arm Manufactured Using Additive Manufacturing Technology, IOP Conf. Ser.: Mater. Sci. Eng., 2021, 1012(1), p 012036.10.1088/1757-899X/1012/1/012036 ↗
34. M. Kumaran, Experimental Investigations on Directed Energy Deposition Based Repair of Stainless Steel 316L Alloy Substrate Manufactured through Hot Rolled Steel and Powder Bed Fusion Process, J. Mater. Eng. Perform., 2022 https://doi.org/10.1007/s11665-022-07513-w10.1007/s11665-022-07513-w ↗