Simultaneous Investigation of Marine Factors Effect on Corrosion Rate of SS 304 in Turbulent Condition
Source abstract
Abstract
Seawater is generally considered to be the most corrosive of the natural environments which threatens all the steel structures in their life time. The effect of environmental marine factors is extremely important in its corrosive behaviour. In this article, the influence of different marine parameters including pH, temperature, salinity and velocity is evaluated on the corrosion rate of SS 304 samples under turbulent condition. Since in actual marine environment, the entire parameters act simultaneously and as there is the possibility of differences between individual and synergistic influences of effecting factors, the influence of each considered parameter on the rate of corrosion has been studied under the combined effect of other factors. Finally, the results are presented via the graphs of dual factor effects which illustrate two-by-two influences of environmental parameters on corrosion rate variation. This research presents the difference between the qualitative and quantitative effects of a parameter under different ranges of considered parameter and also under the simultaneous effect of other combined acting factors, which emphasizes the importance of synergistic effects. In each case, the results obtained in turbulent condition are compared with previous study which had investigated the effect of marine parameters in laminar medium.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. L. Shreir and R.A. Cottis, Shreir’s Corrosion: Corrosion in Liquids, Corrosion Evaluation, Elsevier, London, 2010
2. S. Al-Fozan and A.U. Malik, Effect of Seawater Level on Corrosion Behavior of Different Alloys, Desalination, 2008, 228, p 61–6710.1016/j.desal.2007.08.007 ↗
3. CDA, “Materials for Seawater Pipeline Systems,” CDA Publication TN38, Copper Development Association, Langar, 1986
4. A. Neville and T. Hodgkiess, An Assessment of the Corrosion Behaviour of High-Grade Alloys in Seawater at Elevated Temperature and Under a High Velocity Impinging Flow, Corros. Sci., 1996, 38(6), p 927–95610.1016/0010-938X(96)00180-1 ↗
5. P. Schweitzer, Fundamentals of Metallic Corrosion: Atmospheric and Media Corrosion of Metals, Corrosion Engineering Handbook, Taylor and Francis, Boca Raton, FL, 2007
6. R. Jones, Environmental Effects on Engineered Materials, Marcel Dekker, New York, 200110.1201/9780203908129 ↗
7. D. Fowler, Marine Metal Corrosion, A Layman’s Guide to Corrosion Associated with Pleasure Craft Metals, Gemine Marine Survey Company, San Leon, TX, 2009
8. H.H. Lu and D. Duquette, The Effect of Dissolved Ozone on the Corrosion Behavior of Cu-30Ni and Type 304L Stainless Steel in 0.5 N NaCl Solutions, Corrosion, 1990, 46(10), p 843–85210.5006/1.3585043 ↗
9. G. Englert and I.L. Miiller, The Corrosion Behaviour of Mild Steel and Type 304 Stainless Steel in Media from an Anaerobic Biodigestor, Int. Biodeter. Biodegr., 1996, 37(3–4), p 173–18010.1016/S0964-8305(96)00019-4 ↗
10. K. Sasaki and G. Burstein, Erosion-Corrosion of Stainless Steel Under Impingement by a Fluid Jet, Corros. Sci., 2007, 49, p 92–10210.1016/j.corsci.2006.05.012 ↗
11. Y. Tsutsumi, A. Nishikata, and T. Tsuru, Pitting Corrosion Mechanism of Type 304 Stainless Steel Under a Droplet of Chloride Solutions, Corros. Sci., 2007, 49, p 1394–140710.1016/j.corsci.2006.08.016 ↗
12. A.S. Toloei, The Use of Urea-Modified Clay Nanoparticles in Epoxy Paints to Increase the Corrosion Resistance of Carbon Steel, DOD Corrosion Conference, July 2012, NACE International, La Quinta, Paper 20222
13. A.S. Toloei and S. Atashin, An Investigation on Corrosion Properties of Carbon Steel Coated by Epoxy Paints Containing Modified Clay Nanoparticles at High Temperature, 24th Canadian Materials Science Conference (CMSC), June 2012, University of Western Ontario, London, Paper 0100
14. A.S. Toloei, V. Stoilov, and D. Northwood, Surface Patterning and Corrosion Properties of Nickel, 24th Canadian Materials Science Conference (CMSC), June 2012, University of Western Ontario, London, Paper 0102
15. A.S. Toloei, V. Stoilov, and D.O. Northwood, The Effect of Creating Different Size Surface Patterns on Corrosion Properties of Nickel, ASME International Mechanical Engineering Congress and Exposition (IMECE), November 2012, ASME International, Houston, Paper 8940710.1115/IMECE2012-89407 ↗
16. W. Wyllie, D. Duquette, and B. Brown, The Effect of Dissolved Ozone on the Corrosion Behavior of Stainless Steels in Artificial Seawater, Corrosion, 1998, 54(10), p 781–80010.5006/1.3284799 ↗
17. A.U. Malik, S. Ahmad, I. Andijani, and S. Al-Fouzan, Corrosion Behavior of Steels in Persian Gulf Seawater Environment, Desalination, 1999, 123, p 205–21310.1016/S0011-9164(99)00078-8 ↗
18. R.M. Kain, Crevice Corrosion Behavior of Stainless Steel in Seawater and Related Environments, Corrosion, 1984, 40(6), p 313–32110.5006/1.3581959 ↗
19. J. Wharton and R. Wood, Influence of Flow Conditions on the Corrosion of AISI, 304L Stainless Steel, Wear, 2004, 256, p 525–53610.1016/S0043-1648(03)00562-3 ↗
20. J.A. Wharton and R.J.K. Wood, The Influence of Reynolds Number on Flow Corrosion of Austenitic Stainless Steels in 3.5 wt% NaCl Solution, Corrosion, NACE International, San Diego, 2003, Document ID 0326310.5006/C2003-03263 ↗
21. N. Sridhar, C. Brossia, D.S. Dunn, and A. Anderko, Predicting Localized Corrosion in Seawater, Corrosion, 2004, 60(10), p 915–93610.5006/1.3287826 ↗
22. A. Mollica, A. Trevis, E. Traverso, G. Ventura, G. De Carolis, and R. Dellepiane, Crevice Corrosion Resistance of Stainless Steels in Natural Seawater in the Temperature Range of 25 to 40 °C, Corrosion, 1988, 44(4), p 194–19810.5006/1.3583924 ↗
23. S. Atashin and M. Pakshir, The Synergistic Effect of Seawater’s Parameters on the Corrosion Rate of the Austenitic Stainless Steel 304, Acta. Metall. Sin., 2010, 23(3), p 161–170
24. “Standard Practice for the Preparation of Substitute Ocean Water,” D 1141, ASTM Standard, Vol 11.02, ASTM, West Conshohocken, 1999
25. “Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof,” ASTM 800/A 800M-01, ASTM Standard, Vol 01.02, ASTM, West Conshohocken, 2001
26. M. Zamanzade, T. Shahrabi, and A. Yazdian, Improvement of Corrosion Protection Properties of Calcareous Deposits on Carbon Steel by Pulse Cathodic Protection in Artificial Sea Water, Anti-Corros. Method, 2007, 54(2), p 74–8110.1108/00035590710733566 ↗
27. M. Schumacher, Seawater Corrosion Handbook, Corrosion of Metals in Marine Environments—An Overview, Noyes Publications, Berkshire, 1979
28. P. Roberge, Handbook of Corrosion Engineering, McGraw-Hill, New York, 2000
29. E.L. Paul, V.A. Atiemo-Oheng, and S.M. Kresta, Handbook of Industrial Mixing, Science and Practice, Wiley, Hoboken, NJ, 2004
30. H.T. El-Dessouky and H.M. Ettouney, Fundamentals of Salt Water Desalination, Elsevier, Amsterdam, 2002
31. R. Sánchez-Tovar, M.T. Montañés, J. García-Antóna, and A. Guenbour, Influence of Temperature and Hydrodynamic Conditions on the Corrosion Behavior of AISI, 316L Stainless Steel in Pure and Polluted H3PO4: Application of the Response Surface Methodology, Mater. Chem. Phys., 2012, 133, p 289–29810.1016/j.matchemphys.2012.01.024 ↗
32. L. Yang, Techniques for Corrosion Monitoring, Woodhead Publishing, Cambridge, 2008
33. P. Roberge, Corrosion Kinetics and Applications of Electrochemistry to Corrosion, Corrosion Engineering, McGraw-Hill, New York, 2005
34. L.L. Scribner and S. Taylor, The Measurement and Correction of Electrolyte Resistance in Electrochemical Tests, ASTM, West Conshohocken, 1990
35. J. Mofodi, Principles of Corrosion and Protection of Metals, University of Tehran, Tehran, 2004 ((in Persian))
36. M. Fontana, Corrosion Engineering, McGraw-Hill, New York, 1986
37. R.M. Carranz and M.G. Alvarez, The Effect of Temperature on the Passive Film Properties and Pitting Behaviour of a Fe-Cr-Ni Alloy, Corros. Sci., 1996, 38(6), p 909–92510.1016/0010-938X(96)00176-X ↗
38. INCO, The Corrosion Resistance of Nickel-Containing Alloys in Sulfuric Acid and Related Compounds, The International Nickel Company, New York, 1983
39. A.M. Shams el Din and R.A. Arain, Thermometric, Gravimetric, and Potentiometric Study of Corrosion of Iron Under Conditions of Reaction Fe+2 + Fe+3 = 3Fe+2, Brit. Corros. J., 1998, 33(3), p 189–19610.1179/000705998798115399 ↗
40. E. Bardal, Corrosion and Protection, Springer, London, 200410.1007/b97510 ↗
41. H.A. Porte, The Effect of Environment on the Corrosion of Metals in Sea Water, U. S. Naval Civil Engineering Laboratory, Port Hueneme, CA, 1967
42. F.G. Frese, Effect of Oxygen on the Corrosion of Steels, Ind. Eng. Chem., 1938, 30(1), p 83–8510.1021/ie50337a017 ↗
43. G.J. Danek, The Effect of Sea-Water Velocity on the Corrosion Behavior of Metals, Nav. Eng. J., 2009, 78(5), p 763–76910.1111/j.1559-3584.1966.tb04144.x ↗
44. J.A. Wharton and R.J.K. Wood, Flow Corrosion Behavior of Austenitic Stainless Steels UNS S30403 and UNS S31603, Corros. Sci., 2005, 61(8), p 792–80610.5006/1.3278214 ↗
45. J.A. Wharton and R. Wood, Flow Corrosion Behavior of Austenitic Stainless Steels UNS S30403 and UNS S31603, Corrosion, 2005, 61(8), p 792–80610.5006/1.3278214 ↗