Limestone Calcined Clay Cement for Three-Dimensional-Printed Engineered Cementitious Composites

1. Ma, G.; Wang, L.; and Ju, Y., “State-Of-The-Art Of 3D Printing Technology of Cementitious Material—An Emerging Technique for Construction,” Science China Technological Sciences, V. 61, No. 4, 2018, pp. 475-495. doi: 10.1007/s11431-016-9077-710.1007/s11431-016-9077-7 ↗

2. Li, V. C.; Bos, F. P.; Yu, K.; McGee, W.; Ng, T. Y.; Figueiredo, S. C.; Nefs, K.; Mechtcherine, V.; Nerella, V. N.; Pan, J.; van Zijl, G. P. A. G.; and Kruger, P. J., “On The Emergence of 3D Printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC),” Cement and Concrete Research, V. 132, 2020, p. 106038. doi: 10.1016/j.cemconres.2020.10603810.1016/j.cemconres.2020.106038 ↗

3. Mechtcherine, V.; Bos, F. P.; Perrot, A.; da Silva, W. R. L.; Nerella, V. N.; Fataei, S.; Wolfs, R. J. M.; Sonebi, M.; and Roussel, N., “Extrusion-Based Additive Manufacturing with Cement-Based Materials–Production Steps, Processes, and Their Underlying Physics: A Review,” Cement and Concrete Research, V. 132, 2020, p. 106037. doi: 10.1016/j.cemconres.2020.10603710.1016/j.cemconres.2020.106037 ↗

4. Li, V. C., Engineered Cementitious Composites (ECC), Springer, New York, 2019.10.1007/978-3-662-58438-5 ↗

5. Soltan, D. G., and Li, V. C., “A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing,” Cement and Concrete Composites, V. 90, 2018, pp. 1-13. doi: 10.1016/j.cemconcomp.2018.03.01710.1016/j.cemconcomp.2018.03.017 ↗

6. Yu, K.; Li, L.; Yu, J.; Xiao, J.; Ye, J.; and Wang, Y., “Feasibility of Using Ultra-High Ductility Cementitious Composites for Concrete Structures Without Steel Rebar,” Engineering Structures, V. 170, 2018, pp. 11-20. doi: 10.1016/j.engstruct.2018.05.03710.1016/j.engstruct.2018.05.037 ↗

7. Zhu, B.; Pan, J.; Nematollahi, B.; Zhou, Z.; Zhang, Y.; and Sanjayan, J., “Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction,” Materials & Design, V. 181, 2019, p. 108088. doi: 10.1016/j.matdes.2019.10808810.1016/j.matdes.2019.108088 ↗

8. Ogura, H.; Nerella, V. N.; and Mechtcherine, V., “Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D-Printing,” Materials (Basel), V. 11, No. 8, 2018, p. 1375. doi: 10.3390/ma1108137510.3390/ma11081375 ↗

9. Zhang, D.; Yu, J.; Wu, H.; Jaworska, B.; Ellis, B. R.; and Li, V. C., “Discontinuous Micro-Fibers as Intrinsic Reinforcement for Ductile Engineered Cementitious Composites (ECC),” Composites Part B: Engineering, V. 184, 2020, p. 107741. doi: 10.1016/j.compositesb.2020.10774110.1016/j.compositesb.2020.107741 ↗

10. Bao, Y.; Xu, M.; Soltan, D.; Xia, T.; Shih, A.; Clack, H.; and Li, V. C., “Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements.” International RILEM Conference on Concrete and Digital Fabrication, Springer, 2018, pp. 115-28.10.1007/978-3-319-99519-9_11 ↗

11. Yu, J., and Leung, C. K. Y., “Impact of 3D Printing Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC).” RILEM International Conference on Concrete and Digital Fabrication. Springer, 2018. pp. 255-65.10.1007/978-3-319-99519-9_24 ↗

12. Figueiredo, S. C.; Rodríguez, C. R.; and Ahmed, Z. Y., “An Approach to Develop Printable Strain Hardening Cementitious Composites,” Materials & Design, V. 169, 2019, p. 107651. doi: 10.1016/j.matdes.2019.10765110.1016/j.matdes.2019.107651 ↗

13. Figueiredo, S. C.; Rodríguez, C. R.; Ahmed, Y., Z.; Bos, D. H.; Xu, Y.; Salet, T. M.; Copuroglu, O.; Schlangen, E.; and Bos, F. P., “Mechanical Behavior of Printed Strain Hardening Cementitious Composites,” Materials, V. 13, No. 10, 2020, p. 2253.10.3390/ma13102253 ↗

14. Scrivener, K.; Martirena, F.; Bishnoi, S.; and Maity, S., “Calcined Clay Limestone Cements (LC3),” Cement and Concrete Research, V. 114, 2018, pp. 49-56. doi: 10.1016/j.cemconres.2017.08.01710.1016/j.cemconres.2017.08.017 ↗

15. Dhandapani, Y., Sakthivel, T., Santhanam, M., et al. “Mechanical Properties and Durability Performance of Concretes with Limestone Calcined Clay Cement (LC3),” Cement and Concrete Research, V. 107, July 2017, pp. 136-51.10.1016/j.cemconres.2018.02.005 ↗

16. Muzenda, T. R.; Hou, P.; Kawashima, S.; Sui, T.; and Cheng, X., “The Role of Limestone and Calcined Clay on the Rheological Properties of LC3,” Cement and Concrete Composites, V. 107, 2020, p. 103516. doi: 10.1016/j.cemconcomp.2020.10351610.1016/j.cemconcomp.2020.103516 ↗

17. Chen, Y.; Figueiredo, S. C.; Li, Z.; Chang, Z.; Jansen, K.; Çopuroğlu, O.; and Schlangen, E., “Improving Printability of Limestone-Calcined Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture,” Cement and Concrete Research, V. 132, 2020, p. 106040. doi: 10.1016/j.cemconres.2020.10604010.1016/j.cemconres.2020.106040 ↗

18. Zhu, H.; Zhang, D.; Wang, T.; Wu, H.; and Li, V. C., “Mechanical and Self-Healing Behavior of Low Carbon Engineered Cementitious Composites Reinforced With PP-Fibers,” Construction and Building Materials, V. 259, 2020, p. 119805. doi: 10.1016/j.conbuildmat.2020.11980510.1016/j.conbuildmat.2020.119805 ↗

19. Zhang, D.; Jaworska, B.; Zhu, H.; Dahlquist, K.; and Li, V. C., “Engineered Cementitious Composites (ECC) With Limestone Calcined Clay Cement (LC3),” Cement and Concrete Composites, V. 114, 2020, p. 103766. doi: 10.1016/j.cemconcomp.2020.10376610.1016/j.cemconcomp.2020.103766 ↗

20. ASTM C1437-15, “Standard Test Method for Flow of Hydraulic Cement Mortar,” ASTM International, West Conshohocken, PA, 2015.

21. Avet, F., and Scrivener, K., “Investigation of the Calcined Kaolinite Content on the Hydration of Limestone Calcined Clay Cement (LC3),” Cement and Concrete Research, V. 107, Jan. 2018, pp. 124-135. doi: 10.1016/j.cemconres.2018.02.01610.1016/j.cemconres.2018.02.016 ↗

22. Maraghechi, H., Avet, F., Wong, H., Kamyab, H.; and Scrivener, K., “Performance of Limestone Calcined Clay Cement (LC3) With Various Kaolinite Contents With Respect to Chloride Transport,” Materials and Structures/Materiaux et Constructions, V. 51, No. 5, 2018, pp. 1-17.10.1617/s11527-018-1255-3 ↗

23. Zhao, D., and Khoshnazar, R., “Microstructure of Cement Paste Incorporating High Volume of Low-Grade Metakaolin,” Cement and Concrete Composites, V. 106, 2020, p. 103453.10.1016/j.cemconcomp.2019.103453 ↗

24. Badogiannis, E., and Tsivilis, S., “Exploitation of Poor Greek Kaolins: Durability of Metakaolin Concrete,” Cement and Concrete Composites, V. 31, No. 2, 2009, pp. 128-133. doi: 10.1016/j.cemconcomp.2008.11.00110.1016/j.cemconcomp.2008.11.001 ↗

25. Yang, E. H.; Yang, Y.; and Li, V. C., “Use of High Volumes of Fly Ash to Improve ECC Mechanical Properties and Material Greenness,” ACI Materials Journal, V. 104, No. 6, Nov.-Dec. 2007, pp. 620-628.10.14359/18966 ↗

26. Ma, H., Qian, S., Zhang, Z., Lin, Z.; and Li, V., “Tailoring Engineered Cementitious Composites with local ingredients,” Construction and Building Materials, V. 101, No. Part 1, 2015, pp. 584-595.10.1016/j.conbuildmat.2015.10.146 ↗

27. Arce, G.; Noorvand, H.; Hassan, M.; and Rupnow, T., “Evaluation of the Performance of Engineered Cementitious Composites (ECC) Produced from Local Materials BT—International Congress on Polymers in Concrete (ICPIC 2018),” Springer, 2018. pp. 181-186.10.1007/978-3-319-78175-4_21 ↗

28. Kan, L.; Shi, R.; and Zhu, J., “Effect of Fineness and Calcium Content of Fly Ash on The Mechanical Properties of Engineered Cementitious Composites (ECC),” Construction and Building Materials, V. 209, 2019, pp. 476-484. doi: 10.1016/j.conbuildmat.2019.03.12910.1016/j.conbuildmat.2019.03.129 ↗

29. Ma, H.; Qian, S.; and Li, V. C., “Influence of Fly Ash Type on Mechanical Properties and Self-Healing Behavior of Engineered Cementitious Composite (ECC),” Materials Science, 2016.10.21012/FC9.209 ↗

30. Kan, L.; Shi, R.; Zhao, Y.; Duan, X.; and Wu, M., “Feasibility Study on Using Incineration Fly Ash From Municipal Solid Waste to Develop High Ductile Alkali-Activated Composites,” Journal of Cleaner Production, V. 254, 2020, p. 120168. doi: 10.1016/j.jclepro.2020.12016810.1016/j.jclepro.2020.120168 ↗

31. Assi, L. N.; Carter, K.; Deaver, E.; and Ziehl, P., “Review of Availability of Source Materials for Geopolymer/Sustainable Concrete,” Journal of Cleaner Production, V. 263, 2020, p. 121477. doi: 10.1016/j.jclepro.2020.12147710.1016/j.jclepro.2020.121477 ↗

32. Diaz-Loya, I.; Juenger, M.; Seraj, S.; and Minuteskara, R., “Extending Supplementary Cementitious Material Resources: Reclaimed and Remediated Fly Ash and Natural Pozzolans,” Cement and Concrete Composites, V. 101, 2019, pp. 44-51. doi: 10.1016/j.cemconcomp.2017.06.01110.1016/j.cemconcomp.2017.06.011 ↗

33. Zhu, H.; Zhang, D.; Wang, T.; Wu, H.; and Li, V. C., “Mechanical and Self-Healing Behavior of Low Carbon Engineered Cementitious Composites Reinforced With PP-Fibers,” Construction and Building Materials, V. 259, 2020, p. 119805. doi: 10.1016/j.conbuildmat.2020.11980510.1016/j.conbuildmat.2020.119805 ↗

34. Arunothayan, A. R.; Nematollahi, B.; Ranade, R.; Bong, S. H.; and Sanjayan, J., “Development of 3D-Printable Ultra-High Performance Fiber-Reinforced Concrete for Digital Construction,” Construction and Building Materials, V. 257, 2020, p. 119546. doi: 10.1016/j.conbuildmat.2020.11954610.1016/j.conbuildmat.2020.119546 ↗

35. McGee, W.; Ng, T. Y.; Yu, K.; and Li, V. C., “Extrusion Nozzle Shaping for Improved 3DP of Engineered Cementitious Composites (ECC/SHCC),” RILEM International Conference on Concrete and Digital Fabrication, Springer, 2020. pp. 916-25.10.1007/978-3-030-49916-7_89 ↗

36. Denneman, E., Kearsley, E. P., and Visser, A. T. “Splitting Tensile Test For Fibre Reinforced Concrete,” Materials and Structures/Materiaux et Constructions, V. 44, No. 8, 2011, pp. 1441-1449.10.1617/s11527-011-9709-x ↗

37. Tang, T., “Effects of Load-Distributed Width on Split Tension of Unnotched and Notched Cylindrical Specimens,” Journal of Testing and Evaluation, V. 22, No. 5, 1994, pp. 401-409. doi: 10.1520/JTE12656J10.1520/JTE12656J ↗

38. Carmona, S., and Aguado, A., “New Model for the Indirect Determination of the Tensile Stress-Strain Curve of Concrete by Means of the Brazilian Test,” Materials and Structures, V. 45, No. 10, 2012, pp. 1473-1485. doi: 10.1617/s11527-012-9851-010.1617/s11527-012-9851-0 ↗

39. ASTM C109/C109M-20b, “Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens),” ASTM International, West Conshohocken, PA, 2020.

40. Chen, Y.; Romero Rodriguez, C.; Li, Z.; Chen, B.; Çopuroğlu, O.; and Schlangen, E., “Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing,” Cement and Concrete Composites, V. 114, July 2020.10.1016/j.cemconcomp.2020.103708 ↗

41. Goaiz, H. A.; Farhan, N. A.; Sheikh, M. N.; Yu, T.; and Hadi, M. N. S., “Experimental Evaluation of Tensile Strength Test Methods for Steel Fibre-Reinforced Concrete,” Magazine of Concrete Research, V. 71, No. 8, 2019, pp. 385-394. doi: 10.1680/jmacr.17.0051610.1680/jmacr.17.00516 ↗

42. Abrishambaf, A.; Barros, J. A. O.; and Cunha, V. M. C. F., “Tensile Stress-Crack Width Law for Steel Fibre Reinforced Self-Compacting Concrete Obtained from Indirect (Splitting) Tensile Tests,” Cement and Concrete Composites, V. 57, 2015, pp. 153-165. doi: 10.1016/j.cemconcomp.2014.12.01010.1016/j.cemconcomp.2014.12.010 ↗

43. Zheng, W.; Kwan, A. K. H.; and Lee, P. K. K., “Direct Tension Test of Concrete,” ACI Materials Journal, V. 98, No. 1, 2001, pp. 63-71.10.14359/10162 ↗

44. Raphael, J. M., “Tensile Strength of Concrete,” ACI Journal Proceedings, V. 81, No. 2, Mar.-Apr. 1984, pp. 158-165.10.14359/10653 ↗

45. Lepech, M. D., and Li, V. C., “Large-Scale Processing of Engineered Cementitious Composites,” ACI Materials Journal, V. 105, No. 4, July-Aug. 2008, pp. 358-366.10.14359/19897 ↗

46. Kim, Y. Y.; Kong, H. J.; and Li, V. C., “Design of Engineered Cementitious Composite Suitable for Wet-Mixture Shotcreting,” ACI Materials Journal, V. 100, No. 6, Nov.-Dec. 2003, pp. 511-518.10.14359/12958 ↗

47. Zhu, H.; Yu, K.; and Li, V. C., “Sprayable Engineered Cementitious Composites (ECC) Using Calcined Clay Limestone Cement (LC3) and PP Fiber,” Cement and Concrete Composites, V. 115, 2021, p. 103868. doi: 10.1016/j.cemconcomp.2020.10386810.1016/j.cemconcomp.2020.103868 ↗

48. Wang, Y.; Liu, F.; Yu, J.; Dong, F.; and Ye, J., “Effect of Polyethylene Fiber Content on Physical and Mechanical Properties of Engineered Cementitious Composites,” Construction and Building Materials, V. 251, 2020, p. 118917. doi: 10.1016/j.conbuildmat.2020.11891710.1016/j.conbuildmat.2020.118917 ↗