Research on Impact–Abrasion–Corrosion Behavior of Three Typical Wear-Resistant Steels under High Impact Energy
Source abstract
Abstract
The impact–abrasion–corrosion behavior of three typical wear-resistant steels including low-alloy wear-resistant steel, martensitic stainless steel and Hadfield steel for ball mill liner in simulated acid slurry was studied by impact–abrasion–corrosion test under high impact energy. The structure, mechanical properties and corrosion resistance of the steels have also been characterized. The result showed that the impact–abrasion–corrosion resistance of the martensitic stainless steel was the best under the condition. Further characterization revealed that the damage behavior of the three tested steels was quite different. The damage process has also been discussed by the interaction among impact, abrasion and corrosion behavior. The result is beneficial to provide reference for selection and development of impact–abrasion–corrosion resistant material for ball mill liner working in weakly acidic slurry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Y. Peng, X. Ni, Z. Zhu, Z. Yu, Z. Yin, T. Li, S. Liu, L. Zhao and J. Xu, Friction and Wear of Liner and Grinding Ball in Iron Ore Ball Mill, Tribol. Int., 2017, 115, p 506–517.10.1016/j.triboint.2017.06.017 ↗
2. P. Lu and W. Li, Research and Application of Corrosion-Abrasion Resistant Alloy Cast Steel for Liner Plate in Mine Wet Grinding Machine, Foundry, 2011, 60(05), p 454–458.
3. H.-F. Ding, F.-M. Cui and X.-D. Du, Effect of Component and Microstructure on Impact Wear Property and Mechanism of Steels in Corrosive Condition, Mater. Sci. Eng. A, 2006, 421(1–2), p 161–167.10.1016/j.msea.2005.11.071 ↗
4. A. Hayes, S. Sharifi and M.M. Stack, Micro-Abrasion-Corrosion Maps of 316L Stainless Steel in Artificial Saliva, J. Bio- Tribo-Corros., 2015, 1(2), p 1–15.10.1007/s40735-015-0015-y ↗
5. B.T. Lu and J.L. Luo, Correlation Between Surface-Hardness Degradation and Erosion Resistance of Carbon Steel—Effects of Slurry Chemistry, Tribol. Int., 2015, 83, p 146–155.10.1016/j.triboint.2014.11.008 ↗
6. G.T. Burstein and K. Sasaki, Detecting Electrochemical Transients Generated by Erosion-Corrosion, Electrochim. Acta, 2001, 46(24–25), p 3675–3683. (in English)10.1016/S0013-4686(01)00646-6 ↗
7. J. Basumatary and R.J.K. Wood, Synergistic Effects of Cavitation Erosion and Corrosion for Nickel Aluminium Bronze with Oxide Film in 3.5% NaCl Solution, Wear, 2017, 376–377, p 1286–1297.10.1016/j.wear.2017.01.047 ↗
8. A. Neville and X. Hu, Mechanical and Electrochemical Interactions During Liquid-Solid Impingement on High-Alloy Stainless Steels, Wear, 2001, 251, p 1284–1294. (in English)10.1016/S0043-1648(01)00757-8 ↗
9. X. Du, H. Ding, K. Wu and K. Wang, Three-Body Impact Corrosion-Abrasion: Studying for Low Carbon High Alloy Liner in Ore Grinder, J. Mater. Eng. Perform., 2007, 16(6), p 746–751.10.1007/s11665-007-9119-y ↗
10. Z. Zheng, S. Chen, J. Long, K. Zheng, H. Wang and H. Li, Effect of Chromium Content on the Erosion-Corrosion Behavior of Fe-Cr Alloy Produced by Ball Milling Liner in Weakly Alkaline Slurry, Mater. Res. Express, 2020, 7(3), p 036510.10.1088/2053-1591/ab7b95 ↗
11. J. Singh and S.K. Nath, Improved Slurry Erosion Resistance of Martensitic 13wt.%Cr–4wt.%Ni Steel Subjected to Cyclic Heat Treatment, Wear, 2020, 460, p 203476.10.1016/j.wear.2020.203476 ↗
12. S. Wang, Q. Cui, J. Zou, and Z. Zhang, Impact Wear Mechanism of 2Cr13 Steel Under Small Stress Multi-Impact Conditions, Wear, 2020, 462, p 203492.10.1016/j.wear.2020.203492 ↗
13. X. Du, H. Ding, K. Wang, and K. Wu, Influence of Impact Energy on Impact Corrosion-Abrasion of High Manganese Steel, J. Wuhan Univ. Technol.-Mater. Sci. Ed., 2007, 22(3), p 412–416.10.1007/s11595-006-3412-8 ↗
14. Q.N. Song, Y. Tong, H.L. Li, H.N. Zhang, N. Xu, G.Y. Zhang, Y.F. Bao, W. Liu, Z.G. Liu, and Y.X. Qiao, Corrosion and Cavitation Erosion Resistance Enhancement of Cast Ni–Al Bronze by Laser Surface Melting, J. Iron Steel Res. Int. (2021).10.1007/s42243-021-00674-3 ↗
15. D.C. Saha, E. Biro, A.P. Gerlich, and Y. Zhou, Effects of Tempering Mode on the Structural Changes of Martensite, Mater. Sci. Eng., A, 2016, 673, p 467–475.10.1016/j.msea.2016.07.092 ↗
16. L.M. Zhang, Z.X. Li, J.X. Hu, A.L. Ma, S. Zhang, E.F. Daniel, A.J. Umoh, H.X. Hu, and Y.G. Zheng, Understanding the Roles of Deformation-Induced Martensite of 304 Stainless Steel in Different Stages of Cavitation Erosion, Tribol. Int., 2021, 155, p 106752.10.1016/j.triboint.2020.106752 ↗
17. Q.Z. Huang, H. Cheng, T.T. Deng, X.D. Xu, Y.Z. Cheng, and Q. Hu, The Comparative Study of Microstructure and Properties of Two Die Steels Used for Aluminum Extrusion, Mater. Res. Appl., 2021, 15(1), p 47–50.
18. R. Liu, Microstructure Evolution of High Carbon Cold Drawn Steel Wire During Annealing and Its Effect on Strength, Mater. Res. Appl., 2020, 14(3), p 184–189.
19. Y. Qiao, X. Wang, L. Yang, X. Wang, J. Chen, Z. Wang, H. Zhou, J. Zou, and F. Wang, Effect of Aging Treatment on Microstructure and Corrosion Behavior of a Fe-18Cr-15Mn-0.66N Stainless Steel, J. Mater. Sci. Technol., 2021, 107, p 197–206.10.1016/j.jmst.2021.06.079 ↗
20. Q.N. Song, Y.G. Zheng, D.R. Ni, and Z.Y. Ma, Corrosion and Cavitation Erosion Behaviors of Friction Stir Processed Ni-Al Bronze: Effect of Processing Parameters and Position in the Stirred Zone, Corrosion, 2014, 70(3), p 261–270.10.5006/1070 ↗
21. Y. Qiao, D. Xu, S. Wang, Y. Ma, J. Chen, Y. Wang, and H. Zhou, Effect of Hydrogen Charging on Microstructural Evolution and Corrosion Behavior of Ti-4Al-2V-1Mo-1Fe Alloy, J. Mater. Sci. Technol., 2021, 60, p 168–176.10.1016/j.jmst.2020.06.010 ↗
22. Z.B. Zheng, J. Long, K.H. Zheng, H.L. Zhou, H. Li, and Q.L. Zhang, Study on the Microstructure and Impact Fracture Behavior of Martensitic Alloy Steels, Kovove Mater.-Metall. Mater., 2019, 57(3), p 189–197. (in English)
23. Y. Qiao, L. Zhang, J. Chen, L. Yang, H. Zhou, Y. Wang, and Z. Zheng, Friction and Wear Behaviors of a High Nitrogen Austenitic Stainless Steel Fe-19Cr-15Mn-066N, J. Min. Metall., 2021, 57, p 285–293.10.2298/JMMB201026025Q ↗
24. A.R. Chintha, K. Valtonen, V.T. Kuokkala, S. Kundu, M.J. Peet, and H.K.D.H. Bhadeshia, Role of Fracture Toughness in Impact-Abrasion Wear, Wear, 2019, 428, p 430–437.10.1016/j.wear.2019.03.028 ↗
25. T. Sun, R.-B. Song, F.-Q. Yang, and C.-J. Wu, Wear Behavior of Bainite Ductile Cast Iron Under Impact Load, Int. J. Miner. Metall. Mater., 2014, 9(21), p 871–877.10.1007/s12613-014-0983-9 ↗
26. Z. Zheng, J. Long, S. Wang, H. Li, J. Wang, and K. Zheng, Cavitation Erosion-Corrosion Behaviour of Fe-10Cr Martensitic Steel Microalloyed with Zr in 3.5% NaCl Solution, Corros. Sci., 2021, 184, p 109382.10.1016/j.corsci.2021.109382 ↗
27. T. Sun, R. Song, F. Yang, Y. Li, and C. Wu, Abrasive Abrasion Behavior of Lower Bainite Ductile Iron in Corrosion Media, Acta Metall. Sin., 2014, 50(11), p 1327–1334.
28. G.D. Sun and C.H. Liu, Effect of Cr Content on Impact and Abrasion Properties and Mechanisms of Low Carbon Alloy Steel at Corrosive Condition, Adv. Mater. Res., 2010, 152–153, p 1395–1398.10.4028/www.scientific.net/AMR.152-153.1395 ↗
29. J. Neshati and T.S.T. Shirazani, Electrochemical Behaviour of Stainless Steel 304 Alloy in Erosion-Corrosion Conditions and Synergism Effect, Tribol. Mater. Surf. Interfaces, 2009, 3(3), p 103–109.10.1179/175158309X12560424605114 ↗
30. P. Murkute, J. Ramkumar, S. Choudhary, and K. Mondal, Effect of Alternate Corrosion and Wear on the Overall Degradation of a Dual Phase and a Mild Steel, Wear, 2016, 368–369, p 368–378.10.1016/j.wear.2016.09.027 ↗
31. H. Meng, X. Hu, and A. Neville, A Systematic Erosion-Corrosion Study of Two Stainless Steels in Marine Conditions via Experimental Design, Wear, 2007, 263, p 355–362. (in English)10.1016/j.wear.2006.12.007 ↗
32. W. Li, Effect of Microstructure on Impact Fatigue Resistance and Impact Wear Resistance of Medium Cr-Si Cast Iron, J. Iron Steel Res. Int., 2007, 14(3), p 48–51.
33. Y.-Y. Yang, H.-S. Fang, Y.-K. Zheng, Z.-G. Yang, and Z.-L. Jiang, The Failure Models Induced by White Layers During Impact Wear, Wear, 1995, 185(1), p 17–22.10.1016/0043-1648(94)06586-1 ↗
34. X. Du, J. Wang, G. Sun, and D. Man, Effect of Composition on Impact-Wear Behavior of Alloyed Liner Steels in Corrosive Condition, Mater. Sci. Eng. A, 2008, 477(1–2), p 277–281.10.1016/j.msea.2007.05.031 ↗
35. K. Wang, X.-D. Du, K.-T. Youn, Y. Hayashi, C.G. Lee, and B.H. Koo, Effect of Impact Energy on the Impact-Wear Properties of Low Carbon High Manganese Alloy Steels in Corrosive Conditions, Met. Mater.-Int., 2008, 14(6), p 689–693.10.3365/met.mat.2008.12.689 ↗