Influence of Isothermal Holding on the Microstructure and Mechanical Properties of Electron Beam Welded Dissimilar Inconel 718/ATI 718Plus® Joint
Source abstract
Abstract
Abstract Microstructural changes of the Inconel 718 and ATI 718Plus® base materials and the fusion zone caused by the isothermal hold at 760 °C for up to 500 h were investigated. The evaluation was performed using a scanning electron microscope with backscattered electrons detector and scanning transmission electron microscopy supported by energy-dispersive x-ray spectroscopy. Furthermore, to evaluate the effect of microstructural changes on mechanical properties Vickers microhardness measurements were performed. Exposure of welded joint at high temperature led to coarsening and/or dissolution of main strengthening phases’ particles and nucleation and growth of plate-like precipitates. In the interdendritic region of the fusion zone, the transformation of the Laves phase to a complex cluster of precipitates contained σ phase had taken place. Analysis of microstructure and microhardness measurements showed that ATI 718Plus has better mechanical properties and microstructural stability at elevated temperature than Inconel 718.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. D.F. Paulonis and J.J. Schirra, Alloy 718 at Pratt & Whitney - Historical Perspective and Future Challenges, Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, Ed., TMS (The Minerals, Metals & Materials Society), Pittsburgh, 2001, p 13–2310.7449/2001/Superalloys_2001_13_23 ↗
2. H.J. Wagner, A.M. Hall, Physical Metallurgy of Alloy 718, Def. Met. Inf. Center, Battle Meml. Inst. Columbus Ohio, 1965, Report 217, p 1–2310.21236/AD0466476 ↗
3. K. Kulawik, P.A. Buffat, A. Kruk, A.M. Wusatowska-Sarnek, and A. Czyrska-Filemonowicz, Imaging and Characterization of γ′ and γ″ Nanoparticles in Inconel 718 by EDX Elemental Mapping and FIB-SEM Tomography, Mater. Charact., 2015, 100, p 74–8010.1016/j.matchar.2014.12.012 ↗
4. M. Cemal, S. Cevik, Y. Uzunonat, F. Diltemiz, ALLVAC 718 Plus™ Superalloy for Aircraft Engine Applications, Recent Advances in Aircraft Technology, R.K. Agarwal, Ed., 2012, p 75–9610.5772/38433 ↗
5. R.L. Kennedy, Allvac 718Plus, Superalloy for the Next Forty Years, Superalloys 718 625 716 and Derivatives, E.A. Loria, Ed., TMS (The Minerals, Metals & Materials Society), Pittsburgh, 2005, p 1–14
6. J.F. Radavich, T. Carneiro, A microstructural study of alloy 718Plus™, Superalloys 718, 625, 706 and Derivatives 2005, E.A. Loria, Ed., TMS (The Minerals, Metals & Materials Society), 2005, p 329–34010.7449/2005/Superalloys_2005_329_340 ↗
7. K. Löhnert and F. Pyczak, Microstructure Evolution in the Nickel Base, 7th International Symposium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink et al., Ed., TMS (The Minerals & Materials Society), Pittsburgh, 2010, p 877–89110.7449/2010/Superalloys_2010_877_891 ↗
8. A. Kruk, G. Cempura, S. Lech, and A. Czyrska-Filemonowicz, STEM-EDX and FIB-SEM Tomography of Allvac 718Plus Superalloy, Arch. Metall. Mater., 2016, 61, p 535–54110.1515/amm-2016-0093 ↗
9. W.-D. Cao, Thermal Stability Characterization of Ni-Based ATI, 718Plus Superalloy, Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron et al., Ed., TMS (The Minerals, Metals & Materials Society), Champion, 2008, p 789–797
10. J. Andersson, G. Sjöberg, J. Larsson, Investigation of Homogenization and its Influence on the Repair Welding of Cast Allvac 718Plus, 7th International Symposium on Superalloy 718 and Derivatives, E.A. Ott, J.R. Groh, A. Banik, I. Dempster, T.P. Gabb, R. Helmink et al., Ed., TMS (The Minerals, Metals & Materials Society), Pittsburgh, 2010, p 439–44910.7449/2010/Superalloys_2010_439_454 ↗
11. M. Fisk, A. Lundbäck, J. Edberg, and J.M. Zhou, Simulation of Microstructural Evolution During Repair Welding of an IN718 Plate, Finite Elem. Anal. Des., 2016, 120, p 92–10110.1016/j.finel.2016.07.007 ↗
12. K.R. Vishwakarma, N.L. Richards, and M.C. Chaturvedi, Microstructural Analysis of Fusion and Heat Affected Zones in Electron Beam Welded ALLVAC ® 718PLUS™ Superalloy, Mater. Sci. Eng. A, 2008, 480, p 517–52810.1016/j.msea.2007.08.002 ↗
13. K.R. Vishwakarma, N.L. Richards, and M.C. Chaturvedi, Haz Microfissuring in Eb Welded Allvac 718 Plus™ Alloy, Superalloys 718, 625, 706 and Derivatives, E.A. Loria, Ed., TMS (The Minerals, Metals & Materials Society), Pittsburgh, 2005, p 637–64810.7449/2005/Superalloys_2005_637_647 ↗
14. J. Andersson, Weldability of Precipitation Hardening Superalloys – Influence of Microstructure, Ph.D. Thesis, Chalmers University of Technology, 2011
15. M. Banasik and J. Dworak, Poradnik inżyniera. Spawalnictwo, WNT, Warszawa, 2005
16. A. Kruk and G. Cempura, Application of Analytical Electron Microscopy and FIB-SEM Tomographic Technique for Phase Analysis in As-Cast Allvac 718Plus Superalloy, Int. J. Mater. Res., 2019, 110, p 3–1010.3139/146.111678 ↗
17. J.F. Radavich and G.E. Korth, High Temperature Degradation of Alloy 718 after Longtime Exposures, Superalloys 1992 (Seventh International Symposium), S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger et al., Ed., TMS (The Minerals, Metals & Materials Society), Warrendale, 1992, p 497–50510.7449/1992/Superalloys_1992_497_505 ↗
18. J.Y. Guédou, G. Simon, and J.M. Rongvaux, Development of Damage Tolerant Inco 718 for High Temperature Usage, Superalloys 718, 625, 708 and Various Derivatives, E.A. Loria, Ed., TMS (The Minerals, Metals & Materials Society), Warrendale, 1994, p 509–52210.7449/1994/Superalloys_1994_509_522 ↗
19. R. Krakow, D.N. Johnstone, A.S. Eggeman, D. Hünert, M.C. Hardy, C.M.F. Rae et al., On the Crystallography and Composition of Topologically Close-Packed Phases in ATI, 718Plus®, Acta Mater., 2017, 130, p 271–28010.1016/j.actamat.2017.03.038 ↗
20. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy et al., Grain-Boundary Precipitation in Allvac 718Plus, Acta Mater., 2012, 60, p 2757–276910.1016/j.actamat.2012.01.042 ↗