journal article·2014-08

Study of Unrecovered Strain and Critical Stresses in One-Way Shape Memory Nitinol

Mohammad Honarvar, Naresh V. Datla, Bardia Konh, Tarun K. Podder, Adam P. Dicker, Yan Yu, Parsaoran Hutapea

Publisher page

Abstract

Unique thermomechanical properties of Nitinol known as shape memory and superelasticity make it applicable for different fields such as biomedical, structural, and aerospace engineering. These unique properties are due to the comparatively large recoverable strain, which is being produced in a martensitic phase transformation. However, under certain ranges of stresses and temperatures, Nitinol wires exhibit unrecovered strain. For cyclic applications, it is important to understand the strain behavior of Nitinol wires. In this study, the unrecovered strain of different Nitinol wire diameters was investigated using constant stress experiment. Uniaxial tensile test has been also performed to find the range of critical stresses. It was observed that the unrecovered strain produced in the first loading-unloading cycle affects the total strain in the subsequent cycles. Moreover, a critical range of stress was found beyond which the unrecovered strain was negligible while the wires heated up to the range of 70-80°C, depending on the wire diameters. The unrecovered strain of wire diameters of 0.19 mm and less was found to be sensitive to the critical stress. On the other hand, for wire diameters bigger than 0.19 mm this connection between the unrecovered strain and the critical stress was not observed for the same range of heating temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Magnetic and transport properties of perovskites and related materials · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. T. Duerig, A. Pelton, and D. Stockel, An Overview of Nitinol Medical Applications, Mater. Sci. Eng. A, 1999, 273–275, p 149–16010.1016/S0921-5093(99)00294-4 ↗
2. T.K. Podder, A.P. Dicker, P. Hutapea, and Y. Yu, A Novel Curvilinear Approach for Prostate Seed Implantation, Med. Phys., 2012, 39, p 1887–189210.1118/1.3694110 ↗
3. B. Konh, N.V. Datla, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, Design Exploration Study of a Shape Memory Alloy Actuated Surgical Needle, J. Intelligent Mater. Syst. Struct., 2014 (in press)
4. B. Konh, N.V. Datla, and P. Hutapea, Feasibility of SMA Wire Actuation for an Active Steerable Cannula, J. Med. Devices, 2014 (under review)10.1115/SMASIS2013-3142 ↗
5. N.V. Datla, B. Konh, M. Honarvar, T.K. Podder, A.P. Dicker, Y. Yu, and P. Hutapea, A Model to Predict Deflection of Bevel-Tipped Active Needle Advancing in Soft Tissue, Med. Eng. Phys., 2014, 36(3), p 285–29310.1016/j.medengphy.2013.11.006 ↗
6. N.V. Datla, B. Konh, J.J. Koo, D.K. Choi, Y. Yu, A.P. Dicker, T.K. Podder, K. Darvish, and P. Hutapea, Polyacrylamide Phantom for Self-actuating Needle-Tissue Interaction Studies, Med. Eng. Phys., 2014, 36, p 140–14510.1016/j.medengphy.2013.07.004 ↗
7. B. Konh, M. Honarvar, and P. Hutapea, Application of SMA Wire for an Active Steerable Cannula, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 201310.1115/SMASIS2013-3142 ↗
8. M. Honarvar, B. Konh, N.V. Datla, S. Devlin, and P. Hutapea, Size Effect on the Critical Stress of Nitinol Wires, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Snowbird, UT, 201310.1115/SMASIS2013-3157 ↗
9. N.V. Datla, M. Honarvar, T.M. Nguyen, B. Konh, K. Darvish, Y. Yu, A.P. Dicker, T.K. Podder, and P. Hutapea, Towards a Nitinol Actuator for an Active Surgical Needle, ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Stone Mountain, GA, 201210.1115/SMASIS2012-8204 ↗
10. W. Huang, On the Selection of Shape Memory Alloys for Actuators, Mater. Des., 2002, 23, p 11–1910.1016/S0261-3069(01)00039-5 ↗
11. A. Saigal and M. Fonte, Solid, Shape Recovered “Bulk” Nitinol: Part I-Tension-Compression Asymmetry, Mater. Sci. Eng. A, 2011, 528, p 5536–555010.1016/j.msea.2011.03.060 ↗
12. J.F. Dyet, G.W. Watts, D.F. Ettles, and A.A. Nicholson, Mechanical Properties of Metallic Stents: How do These Properties Influence the Choice of Stent for Specific Lesions?, Cardiovasc. Intervent. Radiol., 2000, 23, p 47–5410.1007/s002709910007 ↗
13. C.B. Churchill and J.A. Shaw, Shakedown Response of Conditioned Shape Memory Alloy Wire, SPIE 6929, Behavior and Mechanics of Multifunctional and Composite Materials, M.J. Dapino, Z. Ounaies, Eds., San Diego, CA, 2008, 6928.10.1117/12.778726 ↗
14. N. Troisfontaine, P. Bidaud, and M. Larnicol, Optimal Design of Micro-actuators Based on SMA Wires, Smart Mater. Struct., 1999, 8, p 197–20310.1088/0964-1726/8/2/004 ↗
15. I. Mihalcz, Fundamental Characteristics and Design Method for Nickel-Titanium Shape Memory Alloy, Periodica Polytech Ser. Mech. Eng., 2001, 45(1), p 75–86
16. L.C. Brinson, One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechacnical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable, J. Intell. Mater. Syst. Struct., 1993, 4(2), p 229–24210.1177/1045389X9300400213 ↗
17. V. Waitz, T. Antretter, F.D. Fischer, and H.P. Karnthaler, Size Effects on Martensitic Phase Transformation in Nanocrystalline NiTi Shape Memory Alloys, Mater. Sci. Technol., 2008, 24(8), p 934–94010.1179/174328408X302620 ↗
18. Y.Q. Fu, S. Zhang, M.J. Wu, W.M. Huang, H.J. Du, J.K. Luo, A.J. Flewitt, and W.I. Milne, On the Lower Thickness Boundary of Sputtered NiTi Films for Shape Memory Application, Thin Solid Films, 2006, 515, p 80–8610.1016/j.tsf.2005.12.039 ↗
19. C.P. Frick, S. Orso, and E. Arzt, Loss of Pseudoelasticity in Nickel-Titanium Sub-micron Compression Pillars, Acta Mater., 2007, 55, p 3845–385510.1016/j.actamat.2007.02.034 ↗
20. Y. Chen and C.A. Schuh, Size Effects in Shape Memory Alloy Microwires, Acta Mater., 2011, 59, p 537–55310.1016/j.actamat.2010.09.057 ↗
21. J.M. San Juan, L.M. No, and C.A. Schuh, Superelasticity and Shape Memory in Micro- and Nano-meter Scale Pillars, Adv. Mater., 2008, 20, p 272–27810.1002/adma.200701527 ↗
22. H.S. Liu, Jr, and L. Mishnaevsky, Martensitic Transformation in Nanostructured Nitinol: Finite Element Modeling of Grain Size and Distribution Effects, Comput. Mater. Sci., 2013, 76, p 27–3610.1016/j.commatsci.2012.11.032 ↗
23. L. An, W.M. Huang, Y.Q. Fu, and N.Q. Guo, A Note on Size Effect in Actuating NiTi Shape Memory Alloys by Electrical Current, Mater. Des., 2008, 29, p 1432–143710.1016/j.matdes.2007.09.001 ↗
24. D.W. Norwich and A. Fasching, Study of the Effect of Diameter on the Fatigue Properties of NiTi Wires, J. Mater. Eng. Perform., 2009, 18(5), p 558–56210.1007/s11665-009-9415-9 ↗
25. S. Civjan, E.F. Huget, and L.B. DeSimon, Potential Applications of Certain Nickel-Titanium (Nitinol) Alloys, J. Dent. Res., 2012, 54(1), p 89–9610.1177/00220345750540014301 ↗
26. S. Leclercq and C. Lexcellent, A General Macroscopic Description of the Thermomechanical Behavior of Shape Memory Alloys, J. Mech. Phys. Solids, 1996, 44(6), p 953–98010.1016/0022-5096(96)00013-0 ↗
27. Y. Liu and J. Van Humbeeck, Luders-Like Deformation Associated with Martensite Reorientation in NiTi, Scr. Mater., 1998, 39(8), p 1047–105510.1016/S1359-6462(98)00241-3 ↗
28. M.H. Elahinia, M. Hashemi, M. Tabesh, and S.B. Bhaduri, Manufacturing and Processing of NiTi Implants: A review, Prog. Mater. Sci., 2012, 57, p 911–94610.1016/j.pmatsci.2011.11.001 ↗
29. Y. Liu and Z. Xie, Progress in Smart Materials and Structures, chap. 3, Detwinning in Shape Memory Alloy, P.L. Recee, Ed., Nova Science Publishers Inc, Singapore, 2007, p 29–65
30. R. Delville, B. Malard, J. Pilch, P. Sittner, and D. Schryvers, Transmission Electron Microscopy Investigation of Dislocation Slip During Superelastic Cycling of Ni-Ti Wires, Int. J. Plast., 2011, 27, p 282–29710.1016/j.ijplas.2010.05.005 ↗
31. Y. Liu, Z.L. Xie, J. Van Humbeeck, and L. Delaey, Effect of Texture Orientation on the Martensite Deformation of NiTi Shape Memory Alloy Sheet, Acta Metall., 2009, 47(2), p 645–660
32. D.C. Lagoudas and S.G. Shu, Residual Deformation of Active Structures with SMA Actuators, Int. J. Mech. Sci., 1999, 41(6), p 595–61910.1016/S0020-7403(98)00035-6 ↗
33. S. Daly, G. Ravichandran, and K. Bhattacharya, Stress-Induced Martensitic Phase Transformation in Thin Sheets of Nitinol, Acta Mater., 2007, 55(10), p 3593–360010.1016/j.actamat.2007.02.011 ↗
34. H. Sayyaadi, M.R. Zakerzadeh, and H. Salehi, A Comparative Analysis of Some One-Dimensional Shape Memory Alloy Constitutive Models Based on Experimental Tests, Sci. Iranica, 2012, 19(2), p 249–25710.1016/j.scient.2012.01.005 ↗
35. J.M. McNaney, V. Imbeni, Y. Jung, P. Papadopoulos, and R.O. Ritchie, An Experimental Study of the Superelastic Effect in a Shape-Memory Nitinol alloy Under Biaxial Loading, Mech. Mater., 2003, 35, p 969–98610.1016/S0167-6636(02)00310-1 ↗
36. D.C. Lagoudas, Shape Memory Alloys Modeling and Engineering Application, Chap. 2, Springer, New York, 2008, p 64–75
37. Y. Liu and D. Favier, Stabilisation of Martensite Due to Shear Deformation Via Variant Reorientation in Polycrystalline NiTi, Acta Mater., 2000, 48, p 3489–349910.1016/S1359-6454(00)00129-4 ↗
38. M. Iijima, M. Ohta, W.A. Brantley, A. Naganishi, T. Murakami, T. Muguruma, and I. Mizoguchi, Transformation Behavior of Nickel-Titanium Orthodontic Wires Under Tensile Load, Dent. Mater. J., 2011, 30(3), p 398–40310.4012/dmj.2010-196 ↗