Modeling the Effects of Tool Pin Configurations and Friction Stir Processing Parameters on Tungsten Inert Gas Welded Dissimilar Aluminum Alloy Joints
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. R.I. Rodriguez, J.B. Jordon, P.G. Allison et al., Microstructure and Mechanical Properties of Dissimilar Friction Stir Welding of 6061-to-7050 Aluminum Alloys, Mater. Des., 2015, 83, p 60–65. https://doi.org/10.1016/j.matdes.2015.05.07410.1016/j.matdes.2015.05.074 ↗
2. S. Memon, M. Paidar, O.O. Ojo et al., The Role of Stirring Time on the Metallurgical and Mechanical Properties during Modified Friction Stir Clinching of AA6061-T6 and AA7075-T6 Sheets, Results Phys., 2020 https://doi.org/10.1016/j.rinp.2020.10336410.1016/j.rinp.2020.103364 ↗
3. Z. Liu, K. Yang, and D. Yan, Refill Friction Stir Spot Welding of Dissimilar 6061/7075 Aluminum Alloy, High Temp. Mater. Process. (London), 2019, 38, p 69–75. https://doi.org/10.1515/htmp-2017-013910.1515/htmp-2017-0139 ↗
4. S. Jain and R.S. Mishra, Multi-response Optimization of Friction Stir Welded Reinforced Joints of Dissimilar Aluminum Alloys, Trans. Indian Inst. Met., 2023 https://doi.org/10.1007/s12666-023-03096-910.1007/s12666-023-03096-9 ↗
5. R.M.S. Bin and A.N. Sinha, Effect of Heat Input on Microstructure and Mechanical Properties of Automated Tungsten Inert Gas-Welded Dissimilar AA6061-T6 and AA7075-T6 Joints, J. Mater. Eng. Perform., 2023 https://doi.org/10.1007/s11665-023-09026-610.1007/s11665-023-09026-6 ↗
6. S. Raja, M.R. Muhamad, M.F. Jamaludin, and F. Yusof, A Review on Nanomaterials Reinforcement in Friction Stir Welding, J. Mater. Res. Technol., 2020, 9, p 16459–16487. https://doi.org/10.1016/j.jmrt.2020.11.07210.1016/j.jmrt.2020.11.072 ↗
7. S. Raja, M.R. Muhamad, F. Yusof et al., Friction Stir Alloying of AZ61 and Mild Steel with Al-CNT Additive, Sci. Technol. Weld. Join., 2022, 27, p 533–540. https://doi.org/10.1080/13621718.2022.208044910.1080/13621718.2022.2080449 ↗
8. B. Wu, M.Z. Ibrahim, S. Raja et al., The Influence of Reinforcement Particles Friction Stir Processing on Microstructure, Mechanical Properties, Tribological and Corrosion Behaviors: A Review, J. Mater. Res. Technol., 2022, 20, p 1940–1975. https://doi.org/10.1016/j.jmrt.2022.07.17210.1016/j.jmrt.2022.07.172 ↗
9. M.A. Ariffin bin, M.R. Muhamad bin, S. Raja et al., Friction Stir Alloying of AZ61 and Mild Steel with Cu-CNT Additive, J. Mater. Res. Technol., 2022, 21, p 2400–2415. https://doi.org/10.1016/j.jmrt.2022.10.08210.1016/j.jmrt.2022.10.082 ↗
10. M.R. bin Muhamad, S. Raja, M.F. Jamaludin et al., Enhancements on Dissimilar Friction Stir Welding Between AZ31 and SPHC Mild Steel With Al–Mg as Powder Additives, J. Manuf. Sci. Eng., 2021 https://doi.org/10.1115/1.404974510.1115/1.4049745 ↗
11. S. Mabuwa and V. Msomi, Fatigue Behaviour of the Multi-Pass Friction Stir Processed AA8011-H14 and AA6082-T651 Dissimilar Joints, Eng. Fail. Anal., 2020, 118, p 104876. https://doi.org/10.1016/j.engfailanal.2020.10487610.1016/j.engfailanal.2020.104876 ↗
12. S. Mabuwa and V. Msomi, Effect of Friction Stir Processing on Gas Tungsten Arc-Welded and Friction Stir-Welded 5083–H111 Aluminium Alloy Joints, Adv. Mater. Sci. Eng., 2019, 2019, p 1–14. https://doi.org/10.1155/2019/351023610.1155/2019/3510236 ↗
13. S. Mabuwa and V. Msomi, Comparative Analysis Between Normal and Submerged Friction Stir Processed Friction Stir Welded Dissimilar Aluminium Alloy Joints, J. Mater. Res. Technol., 2020, 9, p 9632–9644. https://doi.org/10.1016/j.jmrt.2020.06.02410.1016/j.jmrt.2020.06.024 ↗
14. G.A. Roeen, S.G. Yousefi, R. Emadi et al., Remanufacturing the AA5052 GTAW Welds Using Friction Stir Processing, Metals (Basel), 2021, 11, p 749. https://doi.org/10.3390/met1105074910.3390/met11050749 ↗
15. J. da Silva, J.M. Costa, A. Loureiro, and J.M. Ferreira, Fatigue Behaviour of AA6082-T6 MIG Welded Butt Joints Improved by Friction Stir Processing, Mater. Des., 2013, 51, p 315–322. https://doi.org/10.1016/j.matdes.2013.04.02610.1016/j.matdes.2013.04.026 ↗
16. H. Mehdi and R.S. Mishra, Effect of Friction Stir Processing on Mechanical Properties and Heat Transfer of TIG Welded Joint of AA6061 and AA7075, Def. Technol., 2021, 17, p 715–727. https://doi.org/10.1016/j.dt.2020.04.01410.1016/j.dt.2020.04.014 ↗
17. H. Mehdi and R.S. Mishra, Microstructure and Mechanical Characterization of Tungsten Inert Gas-Welded Joint of AA6061 and AA7075 by Friction Stir Processing, Proc. Inst. Mech. Eng. Part L J. Mater. Des. Appl., 2021, 235, p 2531–2546. https://doi.org/10.1177/1464420721100788210.1177/14644207211007882 ↗
18. R.M.S. Bin and A.N. Sinha, Improving Tensile Strength, Impact Toughness and Wear Resistance of TIG Welded Dissimilar AA7075-T6/AA6061-T6 Joints Through Friction Stir Processing, Int. J. Interact. Des. Manuf. (IJIDeM), 2024 https://doi.org/10.1007/s12008-023-01691-010.1007/s12008-023-01691-0 ↗
19. C.B. Fuller and M.W. Mahoney, The Effect of Friction Stir Processing on 5083–H321/5356 Al Arc Welds: Microstructural and Mechanical Analysis, Metall. Mater. Trans. A, 2006, 37, p 3605–3615. https://doi.org/10.1007/s11661-006-1055-110.1007/s11661-006-1055-1 ↗
20. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R. Rep., 2005, 50, p 1–78. https://doi.org/10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
21. M. Shamanian, H. Mostaan, M. Safari, and J.A. Szpunar, Friction Stir Modification of GTA 7075–T6 Al Alloy Weld Joints: EBSD Study and Microstructural Evolutions, Arch. Civ. Mech. Eng., 2017, 17, p 574–585. https://doi.org/10.1016/j.acme.2017.01.00210.1016/j.acme.2017.01.002 ↗
22. A.N. Salah, S. Mabuwa, H. Mehdi et al., Effect of Multipass FSP on Si-rich TIG Welded Joint of Dissimilar Aluminum Alloys AA8011-H14 and AA5083-H321: EBSD and Microstructural Evolutions, SILICON, 2022, 14, p 9925–9941. https://doi.org/10.1007/s12633-022-01717-410.1007/s12633-022-01717-4 ↗
23. M. Ilangovan, S. Rajendra Boopathy, and V. Balasubramanian, Effect of Tool Pin Profile on Microstructure and Tensile Properties of Friction Stir Welded Dissimilar AA 6061–AA 5086 Aluminium Alloy Joints, Def. Technol., 2015, 11, p 174–184. https://doi.org/10.1016/j.dt.2015.01.00410.1016/j.dt.2015.01.004 ↗
24. R. Kadaganchi, M.R. Gankidi, and H. Gokhale, Optimization of Process Parameters of Aluminum Alloy AA 2014–T6 Friction Stir Welds by Response Surface Methodology, Def. Technol., 2015, 11, p 209–219. https://doi.org/10.1016/j.dt.2015.03.00310.1016/j.dt.2015.03.003 ↗
25. S. Jain, R.S. Mishra, and H. Mehdi, Influence of SiC Microparticles and Multi-Pass FSW on Weld Quality of the AA6082 and AA5083 Dissimilar Joints, SILICON, 2023 https://doi.org/10.1007/s12633-023-02455-x10.1007/s12633-023-02455-x ↗
26. R.M.S. Bin and A.N. Sinha, Parametric Optimization and Characterization of AA6061-T6 and AA7075-T6 Tungsten Inert Gas Welding Joints Subjected to Friction Stir Processing, J. Mater. Eng. Perform., 2024 https://doi.org/10.1007/s11665-023-09111-w10.1007/s11665-023-09111-w ↗
27. V. Msomi, S. Mabuwa, O. Muribwathoho, and S.S. Motshwanedi, Effect of Tool Geometry on Microstructure and Mechanical Properties of Submerged Friction Stir Processed AA6082/AA8011 Joints, Mater. Today Proc., 2021, 46, p 638–644. https://doi.org/10.1016/j.matpr.2020.11.58010.1016/j.matpr.2020.11.580 ↗
28. W. Safeen, S. Hussain, A. Wasim et al., Predicting the Tensile Strength, Impact Toughness, and Hardness of Friction Stir-Welded AA6061-T6 Using Response Surface Methodology, Int. J. Adv. Manuf. Technol., 2016, 87, p 1765–1781. https://doi.org/10.1007/s00170-016-8565-910.1007/s00170-016-8565-9 ↗
29. M. Azam, M. Jahanzaib, A. Wasim, and S. Hussain, Surface Roughness Modeling Using RSM for HSLA Steel by Coated Carbide Tools, Int. J. Adv. Manuf. Technol., 2015, 78, p 1031–1041. https://doi.org/10.1007/s00170-014-6707-510.1007/s00170-014-6707-5 ↗
30. H. Mehdi and R.S. Mishra, An Experimental Analysis and Optimization of Process Parameters of AA6061 and AA7075 Welded Joint by TIG+FSP Welding Using RSM, Adv. Mater. Process. Technol., 2022, 8, p 598–620. https://doi.org/10.1080/2374068X.2020.182995210.1080/2374068X.2020.1829952 ↗
31. H. Mehdi and R.S. Mishra, Investigation of Mechanical Properties and Heat Transfer of Welded Joint of AA6061 and AA7075 Using TIG+FSP Welding Approach, J. Adv. Join. Process., 2020, 1, p 100003. https://doi.org/10.1016/j.jajp.2020.10000310.1016/j.jajp.2020.100003 ↗
32. H. Mehdi and R.S. Mishra, Effect of Friction Stir Processing on Microstructure and Mechanical Properties of TIG Welded Joint of AA6061 and AA7075, Metall. Microstruct. Anal., 2020, 9, p 403–418. https://doi.org/10.1007/s13632-020-00640-710.1007/s13632-020-00640-7 ↗
33. H. Mehdi and R.S. Mishra, Effect of Friction Stir Processing on Mechanical Properties and Wear Resistance of Tungsten Inert Gas Welded Joint of Dissimilar Aluminum Alloys, J. Mater. Eng. Perform., 2021, 30, p 1926–1937. https://doi.org/10.1007/s11665-021-05549-y10.1007/s11665-021-05549-y ↗
34. V. Msomi and S. Mabuwa, Effect of Material Positioning on Fatigue Life of the Friction Stir Processed Dissimilar Joints, Mater Res Express, 2020, 7, p 106520. https://doi.org/10.1088/2053-1591/abc18c10.1088/2053-1591/abc18c ↗
35. S. Mabuwa and V. Msomi, Review on Friction Stir Processed TIG and Friction Stir Welded Dissimilar Alloy Joints, Metals (Basel), 2020, 10, p 142. https://doi.org/10.3390/met1001014210.3390/met10010142 ↗
36. Md.P. Alam and A.N. Sinha, Optimization of Process Parameters of Friction Stir Welding Using Desirability Function Analysis, Weld. Int., 2022, 36, p 129–143. https://doi.org/10.1080/09507116.2022.202674510.1080/09507116.2022.2026745 ↗
37. P. Periyasamy, B. Mohan, V. Balasubramanian et al., Multi-Objective Optimization of Friction Stir Welding Parameters Using Desirability Approach to Join Al/SiCp Metal Matrix Composites, Trans. Nonferr. Metals Soc. China, 2013, 23, p 942–955. https://doi.org/10.1016/S1003-6326(13)62551-010.1016/S1003-6326(13)62551-0 ↗
38. S.M. Senthil, R. Parameshwaran, S. Ragu Nathan et al., A Multi-Objective Optimization of the Friction Stir Welding Process Using RSM-Based-Desirability Function Approach for Joining Aluminum Alloy 6063–T6 Pipes, Struct. Multidiscip. Optim., 2020, 62, p 1117–1133. https://doi.org/10.1007/s00158-020-02542-210.1007/s00158-020-02542-2 ↗
39. M. Vahdati, M. Moradi, and M. Shamsborhan, Modeling and Optimization of the Yield Strength and Tensile Strength of Al7075 Butt Joint Produced by FSW and SFSW Using RSM and Desirability Function Method, Trans. Indian Inst. Met., 2020, 73, p 2587–2600. https://doi.org/10.1007/s12666-020-02075-810.1007/s12666-020-02075-8 ↗
40. S. Kumar, S. Kumar, and A. Kumar, Optimization of Process Parameters for Friction Stir Welding of Joining A6061 and A6082 Alloys by Taguchi Method, Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci., 2013, 227, p 1150–1163. https://doi.org/10.1177/095440621245944810.1177/0954406212459448 ↗
41. M. Raturi, A. Garg, and A. Bhattacharya, Joint Strength and Failure Studies of Dissimilar AA6061-AA7075 Friction Stir Welds: Effects of Tool Pin, Process Parameters and Preheating, Eng. Fail. Anal., 2019, 96, p 570–588. https://doi.org/10.1016/j.engfailanal.2018.12.00310.1016/j.engfailanal.2018.12.003 ↗
42. R.M.S. Bin, A.N. Sinha, H. Mehdi, and Q. Murtaza, Effect of Pulsed TIG Welding Parameters on the Microstructural Evolution and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Weldments, Arab. J. Sci. Eng., 2023 https://doi.org/10.1007/s13369-023-08563-510.1007/s13369-023-08563-5 ↗
43. M.S. Bin Reyaz and A.N. Sinha, An Experimental Investigation on Mechanical Characteristics and Wear Behaviour of TIG Welded Dissimilar Aluminum Alloys, J. Adhes. Sci. Technol., 2023 https://doi.org/10.1080/01694243.2023.225178210.1080/01694243.2023.2251782 ↗
44. M.S. Bin Reyaz and A.N. Sinha, Analysis of Mechanical Properties and Optimization of Tungsten Inert Gas Welding Parameters on Dissimilar AA6061-T6 and AA7075-T6 by a Response Surface Methodology-Based Desirability Function Approach, Eng. Optim., 2023 https://doi.org/10.1080/0305215X.2023.223013310.1080/0305215X.2023.2230133 ↗
45. N. Shanmuga Sundaram and N. Murugan, Tensile Behavior of Dissimilar Friction Stir Welded Joints of Aluminium Alloys, Mater. Des., 2010, 31, p 4184–4193. https://doi.org/10.1016/j.matdes.2010.04.03510.1016/j.matdes.2010.04.035 ↗
46. M. Karthikeyan and Jonah, Effect of Tool Travel Speed on Tensile Strength of Friction Stir Welded Dissimilar Joint of Aluminium AA6061 T6 Alloy and Maraging M250 Steel, Mater. Res. Express, 2021 https://doi.org/10.1088/2053-1591/abde5710.1088/2053-1591/abde57 ↗
47. S. Benavides, Y. Li, L.E. Murr et al., Low-Temperature Friction-Stir Welding of 2024 Aluminum, Scr. Mater., 1999, 41, p 809–815. https://doi.org/10.1016/S1359-6462(99)00226-210.1016/S1359-6462(99)00226-2 ↗
48. R. Jain, S.K. Pal, and S.B. Singh, Investigation on Effect of Pin Shapes on Temperature, Material Flow and Forces During Friction Stir Welding: A Simulation Study, Proc. Inst. Mech. Eng. B J. Eng. Manuf., 2019, 233, p 1980–1992. https://doi.org/10.1177/095440541880561510.1177/0954405418805615 ↗
49. P. Vijayavel and V. Balasubramanian, Effect of Pin Profile Volume Ratio on Microstructure and Tensile Properties of Friction Stir Processed Aluminum Based Metal Matrix Composites, J. Alloys Compd., 2017, 729, p 828–842. https://doi.org/10.1016/j.jallcom.2017.09.11710.1016/j.jallcom.2017.09.117 ↗
50. K. Elangovan and V. Balasubramanian, Influences of Tool Pin Profile and Tool Shoulder Diameter on the Formation of Friction Stir Processing Zone in AA6061 Aluminium Alloy, Mater. Des., 2008, 29, p 362–373. https://doi.org/10.1016/j.matdes.2007.01.03010.1016/j.matdes.2007.01.030 ↗
51. D. Peng, J. Shen, Q. Tang et al., Effects of Aging Treatment and Heat Input on the Microstructures and Mechanical Properties of TIG-Welded 6061–T6 Alloy Joints, Int. J. Miner. Metall. Mater., 2013, 20, p 259–265. https://doi.org/10.1007/s12613-013-0721-810.1007/s12613-013-0721-8 ↗
52. Y. Koli, N. Yuvaraj, S. Aravindan, and A. Vipin, Multi-Response Mathematical Model for Optimization of Process Parameters in CMT Welding of Dissimilar Thickness AA6061-T6 and AA6082-T6 Alloys Using RSM-GRA Coupled with PCA, Adv. Ind. Manuf. Eng., 2021 https://doi.org/10.1016/j.aime.2021.10005010.1016/j.aime.2021.100050 ↗
53. N.P. Zant, C.K.Y. Wong, and J. Tong, Fatigue Failure in the Cement Mantle of a Simplified Acetabular Replacement Model, Int. J. Fatigue, 2007, 29, p 1245–1252. https://doi.org/10.1016/j.ijfatigue.2006.10.01310.1016/j.ijfatigue.2006.10.013 ↗
54. M. Tariq, I. Khan, G. Hussain, and U. Farooq, Microstructure and Micro-Hardness Analysis of Friction Stir Welded Bi-Layered Laminated Aluminum Sheets, Int. J. Lightweight Mater. Manuf., 2019, 2, p 123–130. https://doi.org/10.1016/j.ijlmm.2019.04.01010.1016/j.ijlmm.2019.04.010 ↗
55. S. Madhavan, M. Kamaraj, L. Vijayaraghavan, and K. Srinivasa Rao, Microstructure and Mechanical Properties of Aluminium/Steel Dissimilar Weldments: Effect of Heat Input, Mater. Sci. Technol. (United Kingdom), 2017, 33, p 200–209. https://doi.org/10.1080/02670836.2016.117671610.1080/02670836.2016.1176716 ↗
56. M. Bhattacharyya, T. Gnaupel-Herold, K.S. Raja et al., Evaluation of Residual Stresses in Isothermal Friction Stir Welded 304L Stainless Steel Plates, Mater. Sci. Eng. A, 2021, 826, p 141982. https://doi.org/10.1016/j.msea.2021.14198210.1016/j.msea.2021.141982 ↗
57. Q. Qin, H. Zhao, J. Li et al., Microstructures and Mechanical Properties of TIG Welded Al-Mg2Si Alloy Joints, J. Manuf. Process., 2020, 56, p 941–949. https://doi.org/10.1016/j.jmapro.2020.05.05810.1016/j.jmapro.2020.05.058 ↗
58. A. Equbal, M.I. Equbal, and A.K. Sood, An Investigation on the Feasibility of Fused Deposition Modelling Process in EDM Electrode Manufacturing, CIRP J. Manuf. Sci. Technol., 2019, 26, p 10–25. https://doi.org/10.1016/j.cirpj.2019.07.00110.1016/j.cirpj.2019.07.001 ↗
59. S. Verma, M. Gupta, and J.P. Misra, Optimization of Process Parameters in Friction Stir Welding of Armor-Marine Grade Aluminium Alloy Using Desirability Approach, Mater. Res. Express, 2018, 6, p 026505. https://doi.org/10.1088/2053-1591/aaea0110.1088/2053-1591/aaea01 ↗