Effect of Rare-Earth La2O3 on Tribological Properties of Laser Cladding Nickel-Based Coatings on 35CrMoV Alloy Steel
Source abstract
Abstract
The Ni60 alloy cladding layer with different La2O3 content was prepared by laser cladding technology on 35CrMoV surface. The phase composition, element distribution, micro-structure and tribological properties of the coating with different addition of La2O3 were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), Microscopic Vickers hardness tester, MicroXAM-800 optical surface photometer and friction testing machine. The results show that the main phases of the cladding layer are (Ni, Fe), CrB, CrMn, Cr7C3 and Cr23C6. The diffraction peak shifted to the left in XRD with the addition of La2O3, which indicates that there is a certain lattice distortion in the cladding phase. The microstructure of the cladding layer is refined, the friction coefficient and the depth of wear trace are decreased to varying degrees, and the wear resistance of the cladding layer is greatly improved. The results show that the addition of 1.6%La2O3 can effectively refine grain, inhibit the formation of cracks and pores, and improve the wear performance of the cladding layer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. X. Jiang, Y. Zhou, C. Shi, and D. Mao, Effects of Ultrasonic-Aided Quenching on the Corrosion Resistance of GB 35CrMoV Steel in Seawater Environment, Metals, 2018, 8(2), p 104.10.3390/met8020104 ↗
2. Z. Gao, H. Ren, H. Geng, Y. Yu, Z. Gao, and C. Zhang, Effect of CeO2 on Microstructure and Wear Property of Laser Cladding Ni-Based Coatings Fabricated on 35CrMoV Steel, J. Mater Eng. Perform., 2022, 31, p 9534–9543.10.1007/s11665-022-06950-x ↗
3. C.J. Liang, C.L. Wang, K.X. Zhang, M.L. Liang, Y.G. Xie, W.J. Liu, J.J. Yang, and S.F. Zhou, Nucleation and Strengthening Mechanism of Laser Cladding Aluminum alloy by Ni-Cr-B-Si Alloy Powder Based on Rare Earth Control, J. Mater. Process. Technol., 2021, 294, p 117145.10.1016/j.jmatprotec.2021.117145 ↗
4. A.A. Siddiqui and A.K. Dubey, Recent Trends in Laser Cladding and Surface Alloying, Opt. Laser Technol., 2021, 134, p 106619.10.1016/j.optlastec.2020.106619 ↗
5. T. Zhang, H. Xiao, Z. Zhang, B. Yao, and F. Yang, Effect of Y2O3 Addition on Microstructural Characteristics and Microhardness of Laser-Cladded Ti-6Al-4V Alloy Coating, J. Mater. Eng. Perform., 2020, 29(12), p 8221–8235.10.1007/s11665-020-05316-5 ↗
6. F. Weng, H. Yu, C. Chen, J. Liu, L. Zhao, J. Dai, and Z. Zhao, Effect of Process Parameters on the Microstructure Evolution and Wear Property of the Laser Cladding Coatings on Ti-6Al-4V Alloy, J. Alloy. Compd., 2017, 692, p 989–996.10.1016/j.jallcom.2016.09.071 ↗
7. S. Sun, H. Fu, X. Ping, X. Guo, J. Lin, Y. Lei, W. Wu, and J. Zhou, Effect of CeO2 Addition on Microstructure and Mechanical Properties of In-Situ (Ti, Nb)C/Ni Coating, Surf. Coat. Technol., 2019, 359, p 300–313.10.1016/j.surfcoat.2018.12.083 ↗
8. L. Yinghua, P. Xuelong, K. Jiacai, and D. Yingjun, Improving the Microstructure and Mechanical Properties of Laser Cladded Ni-Based Alloy Coatings by Changing Their Composition: A review, Rev. Adv. Mater. Sci., 2020, 59(1), p 340–351.10.1515/rams-2020-0027 ↗
9. C. Wang, Y. Gao, R. Wang, D. Wei, M. Cai, and Y. Fu, Microstructure of Laser-Clad Ni60 Cladding Layers Added with Different Amounts of Rare-Earth Oxides on 6063 Al Alloys, J. Alloy. Compd., 2018, 740, p 1099–1107.10.1016/j.jallcom.2018.01.061 ↗
10. Y. Chen, Y.J. Chao, Z. Luo, Y. Cai, and C. Ma, Microstructure and Wear Resistance of Co-Based/Cr3C2 Coatings with CeO2, Surf. Eng., 2017, 34(8), p 588–595.10.1080/02670844.2017.1363484 ↗
11. Z. Gao, H. Geng, Z. Qiao, B. Sun, Z. Gao, and C. Zhang, In situ TiBX/TiXNiY/TiC Reinforced Ni60 Composites by Laser Cladding and Its Effect on the Tribological Properties, Ceram. Int. (2022)10.1016/j.ceramint.2022.10.087 ↗
12. S. Najafi, A. Sheikhani, Y. Palizdar, and H. Torkamani, Processing Maps and Hot Compression Behaviors of ZK60 Alloy After Adding Different Rare Earth Elements, J. Mater. Eng. Perform. (2022)10.1007/s11665-022-07261-x ↗
13. C. Wang, Y. Gao, Z. Zeng, and Y. Fu, Effect of Rare-Earth on Friction and Wear Properties of Laser Cladding Ni-based Coatings on 6063Al, J. Alloy. Compd., 2017, 727, p 278–285.10.1016/j.jallcom.2017.08.101 ↗
14. M. Li, B. Han, Y. Wang, and K. Pu, Effects of La2O3 on the Microstructure and Property of Laser Cladding Ni-Based Ceramic Coating, Optik, 2017, 130, p 1032–1037.10.1016/j.ijleo.2016.11.111 ↗
15. X.-B. Liu, X.-J. Meng, H.-Q. Liu, G.-L. Shi, S.-H. Wu, C.-F. Sun, M.-D. Wang, and L.-H. Qi, Development and Characterization of Laser Clad High Temperature Self-Lubricating Wear Resistant Composite Coatings on Ti-6Al-4V alloy, Mater. Des., 2014, 55, p 404–409.10.1016/j.matdes.2013.09.038 ↗
16. P. Farahmand, S. Liu, Z. Zhang, and R. Kovacevic, Laser Cladding Assisted by Induction Heating of Ni-WC Composite Enhanced by Nano-WC and La2O3, Ceram. Int., 2014, 40(10), p 15421–15438.10.1016/j.ceramint.2014.06.097 ↗
17. B. Ren, R.F. Zhao, A.Y. Jiang, and Y. Yu, Microstructure and Oxidation Behavior of CoCrxCuFeMnNi High-Entropy Alloys Fabricated by Vacuum Hot-Pressing Sintering, Micron, 2022, 158, p 103291.10.1016/j.micron.2022.103291 ↗
18. S. Lin, J. Dang, Z. Wang, Y. Sun, and Y. Xiang, Enhanced Strength and Toughness in Al-Mg-Si Alloys with Addition of Cr, Mn, and Cu Elements. J. Mater. Eng. Perfor. (2022)10.1007/s11665-022-07191-8 ↗
19. M.M. Quazi, M.A. Fazal, A.S.M.A. Haseeb, F. Yusof, H.H. Masjuki, and A. Arslan, Effect of Rare Earth Elements and Their Oxides on Tribo-Mechanical Performance of Laser Claddings: A Review, J. Rare Earths, 2016, 34(6), p 549–564.10.1016/S1002-0721(16)60061-3 ↗
20. P. Song, K. Xie, J. Yang, D. Jiang, Z. Liu, J. Zhang, G. Zhang, and B. Cai, Influence of Ball Milling Process on Microstructure, Mechanical and Thermal Expansion Properties of ZrMgMo3O12/Al-40Si Composites, Micron, 2022, 157, p 103245.10.1016/j.micron.2022.103245 ↗
21. C.Y. Hsu, J. Stodolna, P. Todeschini, F. Delabrouille, B. Radiguet, and F. Christien, Accurate Quantification of Phosphorus Intergranular Segregation in Iron by STEM-EDX, Micron, 2022, 153, p 103175.10.1016/j.micron.2021.103175 ↗
22. Y. Feng, K. Feng, C. Yao, and Z. Li, Effect of LaB6 Addition on the Microstructure and Properties of (Ti3Al + TiB)/Ti Composites by Laser Cladding, Mater. Des., 2019, 181, p 107959.10.1016/j.matdes.2019.107959 ↗
23. D. Shu, S. Dai, G. Wang, W. Si, P. Xiao, X. Cui, and X. Chen, Influence of CeO2 Content on WC Morphology and Mechanical Properties of WC/Ni Matrix Composites Coating Prepared by Laser In-Situ Synthesis Method, J. Market. Res., 2020, 9(5), p 11111–11120.
24. I. Hemmati, V. Ocelík, and J.T.M. De Hosson, Microstructural Characterization of AISI 431 Martensitic Stainless Steel Laser-Deposited Coatings, J. Mater. Sci., 2011, 46(10), p 3405–3414.10.1007/s10853-010-5229-2 ↗
25. Q. Wang, J. Yang, W. Niu, Y. Li, X. Mao, Y. Wang, and K. Zhang, Effect of La2O3 on Microstructure and Properties of Fe-Based Alloy Coatings by Laser Cladding, Optik, 2021, 245, p 167653.10.1016/j.ijleo.2021.167653 ↗
26. J. Yue, X. Liu, Y. Sui, C. Liu, X. Sun, and W. Chen, Combined Effect of Y2O3 Nanoparticles and Si Second-Phase Oxide on Microstructure and Wear Resistance of Plasma-Clad Steel Coating, Surf. Coat. Technol., 2020, 403, p 126348.10.1016/j.surfcoat.2020.126348 ↗
27. M.K. Alam, A. Edrisy, J. Urbanic, and J. Pineault, Microhardness and Stress Analysis of Laser-Cladded AISI 420 Martensitic Stainless Steel, J. Mater. Eng. Perform., 2017, 26(3), p 1076–1084.10.1007/s11665-017-2541-x ↗
28. W. Chen, X. He, W. Yu, J. Shi, M. Wang, and K. Yao, Characterization of the microstructure and hardness of case-carburized gear steel, Micron, 2021, 144, p 103028.10.1016/j.micron.2021.103028 ↗
29. J. Zhou, J. Xu, S. Huang, Z. Hu, X. Meng, and X. Feng, Effect of Laser Surface Melting with Alternating Magnetic Field on Wear and Corrosion Resistance of Magnesium Alloy, Surf. Coat. Technol., 2017, 309, p 212–219.10.1016/j.surfcoat.2016.11.077 ↗
30. L. Yanan, S. Ronglu, N. Wei, Z. Tiangang, and L. Yiwen, Effects of CeO2 on Microstructure and Properties of TiC/Ti2Ni Reinforced Ti-Based Laser Cladding Composite Coatings, Opt. Lasers Eng., 2019, 120, p 84–94.10.1016/j.optlaseng.2019.03.001 ↗