Influence of Graphene on Microstructure and Corrosion and Wear Resistance of Micro-Arc Oxidation Coatings on D16T Al Alloy Drill Pipe
Source abstract
Abstract
Coatings were prepared on D16T Al alloy in electrolytes with and without graphene by micro-arc oxidation technology. Influences of graphene on the microstructure, corrosion and wear resistance of the coating were investigated. X-ray diffraction analysis result indicates that the coating is mainly composed of α-Al2O3, γ-Al2O3 and Al substrate. γ-Al2O3 was the dominant phase. The microstructure of coatings characterized by scanning electron microscopy, energy-dispersive x-ray spectroscopy and transmission electron microscopy shows the coating with graphene is flatter, denser, less pores and cracks than that of the coating without graphene. Moreover, the coating is consistent of a loose outer layer and dense inner layer. A little molten particles and many agglomerates accumulated on the surface of the coating. Graphene successfully embedded into the coating remarkedly decreased micro-pores and micro-cracks and slightly increased the thickness. The coating with graphene shows the better corrosion and wear resistance than the coating without graphene. The current potential, corrosion current density, wear and friction coefficient of coatings with graphene were − 0.41 V, 3.97E−8 A/cm2, 1.57 mg and 0.68, respectively, revealing the desirable corrosion and wear resistance. The presence of graphene in coatings improved the thickness and microstructure and increased the corrosion and wear resistance of the coating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. C. Santus, L. Bertini, M. Beghini, A. Merlo and A. Baryshnikov, Torsional Strength Comparison Between Two Assembling Techniques for Aluminium Drill Pipe to Steel Tool Joint Connection, Int. J. Pres. Ves. Pip., 2009, 86(2–3), p 177–186.10.1016/j.ijpvp.2008.09.007 ↗
2. W. Liu, Y. Liu, W. Chen, T. Shi, A. Singh and Q. Lu, Longitudinal Crack Failure Analysis of Box of S135 Tool Joint in Ultra-Deep Well, Eng. Fail. Anal., 2015, 48, p 283–296.10.1016/j.engfailanal.2014.11.022 ↗
3. A.I. Shakirova, R.A. Ismakov and A.K. Agliullin, Comprehensive Studies of Aluminum Drill Pipe Materials, Bull. Tomsk Polytech. Univ.-Geo Assets Eng., 2017, 328, p 95–103.
4. R.A. Erin, Aluminum Alloy Drill Pipe in Geothermal Drilling, Proceedings World Geothermal Congress 2010, Bali, Indonesia, 2010, p 25–29
5. W. Liu, Y. Liu, Y. Lin, Z. Zhang, S. Feng, M. Talha, Y. Shi and T. Shi, Effects of Graphene on Structure and Corrosion Resistance of Plasma Electrolytic Oxidation Coatings Formed on D16T Al Alloy, Appl. Surf. Sci., 2019, 475, p 645–659.10.1016/j.apsusc.2018.12.233 ↗
6. L. Wen, Y. Wang, Y. Zhou, L. Guo and J. Ouyang, Microstructure and Corrosion Resistance of Modified 2024 Al Alloy Using Surface Mechanical Attrition Treatment Combined with Microarc Oxidation Process, Corros. Sci., 2011, 53(1), p 473–480.10.1016/j.corsci.2010.09.061 ↗
7. M. Javidi and H. Fadaee, Plasma Electrolytic Oxidation of 2024–T3 Aluminum Alloy and Investigation on Microstructure and Wear Behavior, Appl. Surf. Sci., 2013, 286, p 212–219.10.1016/j.apsusc.2013.09.049 ↗
8. X. Chen, D. Liao, D. Zhang, X. Jiang, P. Zhao and R. Xu, Effect of Content of Graphene on Corrosion Behavior of Micro-arc Oxidation Coating on Titanium Alloy Drill Pipe, Int. J. Electrochem. Sci., 2020, 15, p 710–721.10.20964/2020.01.48 ↗
9. P. Ahmadi, A.A. Sarabi, H. Eivaz Mohammadloo and R. Behgam, Effect of practical parameters on the structure and corrosion behavior of vanadium/zirconium conversion coating on AA 2024 aluminum alloy, J. Coat. Technol. Res., 2019, 16(5), p 1503–1513.10.1007/s11998-019-00215-4 ↗
10. A. Bahramian, K. Raeissi and A. Hakimizad, An investigation of the Characteristics of Al2O3/TiO2 PEO Nanocomposite Coating, Appl. Surf. Sci., 2015, 351, p 13–26.10.1016/j.apsusc.2015.05.107 ↗
11. K. Babaei, A. Fattah-alhosseini and M. Molaei, The Effects of Carbon-Based Additives on Corrosion and Wear Properties of Plasma Electrolytic Oxidation (PEO) Coatings Applied on Aluminum and Its Alloys: A Review, Surf. Interface., 2020, 21, p 100677.10.1016/j.surfin.2020.100677 ↗
12. S. Fatimah, M.P. Kamil and J.H. Kwon, Dual Incorporation of SiO2 and ZrO2 Nanoparticles into the Oxide Layer on 6061 Al Alloy Via Plasma Electrolytic Oxidation: Coating Structure and Corrosion Properties, J. Alloys Compd., 2017, 707, p 358–364.10.1016/j.jallcom.2016.11.098 ↗
13. S. Ma, X. Suo and J. Qiu, Fabrication of n-SiO2 Reinforced Al2O3 Composite Coatings on 7A52 Aluminium Alloy by Micro-arc Oxidation, Adv. Mater. Res., 2010, 97–101, p 1463–1466.10.4028/www.scientific.net/AMR.97-101.1463 ↗
14. Q. Chen, Z. Jiang, S. Tang, W. Dong, Q. Tong and W. Li, Influence of Graphene Particles on the Micro-arc Oxidation Behaviors of 6063 Aluminum Alloy and the Coating Properties, Appl. Surf. Sci., 2017, 423, p 939–950.10.1016/j.apsusc.2017.06.202 ↗
15. M.F. Maqsood, M.A. Raza, F.A. Ghauri, Z.U. Rehman and M.T. Ilyas, Corrosion Study of Graphene Oxide Coatings on AZ31B Magnesium Alloy, J. Coat. Technol. Res., 2020, 17(5), p 1321–1329.10.1007/s11998-020-00350-3 ↗
16. W. Liu, C. Blawert, M.L. Zheludkevich, Y. Lin, M. Talha, Y. Shi and L. Chen, Effects of Graphene Nanosheets on the Ceramic Coatings Formed on Ti6Al4V Alloy Drill Pipe by Plasma Electrolytic Oxidation, J. Alloys Compd., 2019, 789, p 996–1007.10.1016/j.jallcom.2019.03.060 ↗
17. A. Khakzad, S.M. Mousavi Khoi, S.A. Tayebifard, E. Aghaie, Y. Behnamian, M. Mozammel and H. Maleki-Ghaleh, Alumina-Silica Composite Coatings on Aluminum by Plasma Electrolytic Oxidation: The Effect of Coating TIME on Microstructure, Phase, and Corrosion Behavior, J. Mater. Eng. Perform., 2017, 26(6), p 2663–2670.10.1007/s11665-017-2736-1 ↗
18. K.J. Ma, M.M.S. Bosta and W.T. Wu, Preparation of Self-lubricating Composite Coatings through a Micro-arc Plasma Oxidation with Graphite in Electrolyte Solution, Surf. Coat. Tech., 2014, 259, p 318–324.10.1016/j.surfcoat.2014.03.004 ↗
19. G.H. Lv, H. Chen, W.C. Gu, W.R. Feng, L. Li, E.W. Niu, X.H. Zhang and S.Z. Yang, Effects of Graphite Additives in Electrolytes on the Microstructure and Corrosion Resistance of Alumina PEO Coatings, Curr. Appl. Phys., 2009, 9(2), p 324–328.10.1016/j.cap.2008.03.001 ↗
20. Y. Guan, Y. Xia and G. Lia, Growth Mechanism and Corrosion Behavior of Ceramic Coatings on Aluminum Produced by Autocontrol AC Pulse PEO, Surf. Coat. Tech., 2008, 202(19), p 4602–4612.10.1016/j.surfcoat.2008.03.031 ↗
21. G. Yang, X. Lu, Y. Bai, H. Cui and Z. Jin, The Effects of Current Density on the Phase Composition and Microstructure Properties of Micro-arc Oxidation Coating, J. Alloys Compd., 2002, 345(1–2), p 196–200.
22. Z.J. Wang, L.N. Wu, W. Cai, A. Shan and Z.H. Jiang, Effects of Fluoride on the Structure and Properties of Microarc Oxidation Coating on Aluminium Alloy, J. Alloys Compd., 2010, 505(1), p 188–193.10.1016/j.jallcom.2010.06.027 ↗
23. M. Kaseem, M.P. Kamil and Y.G. Ko, Electrochemical Response of MoO2-Al2O3 Oxide Films Via Plasma Electrolytic Oxidation, Surf. Coat. Tech., 2017, 322, p 163–173.10.1016/j.surfcoat.2017.05.051 ↗
24. N.P. Wasekar, A. Jyothirmayi, L.R. Krishna and G. Sundararajan, Effect of Micro Arc Oxidation Coatings on Corrosion Resistance of 6061-Al Alloy, J. Mater. Eng. Perform., 2009, 17(5), p 108–713.
25. E. Matykina, R. Arrabal, F. Monfort, P. Skeldon and G.E. Thompson, Incorporation of Zirconia into Coatings Formed by DC Plasma Electrolytic Oxidation of Aluminum in Nanoparticles Suspensions, Appl. Surf. Sci., 2008, 255(5), p 2830–2839.10.1016/j.apsusc.2008.08.036 ↗
26. M. Tang, Z. Feng, G. Li, Z. Zhang and R. Zhang, High-Corrosion Resistance of the Microarc Oxidation Coatings on Magnesium Alloy Obtained in Potassium Fluotitanate Electrolytes, Surf. Coat. Tech., 2015, 264, p 105–113.10.1016/j.surfcoat.2015.01.013 ↗
27. D. Salehi Doolabi, M. Ehteshamzadeh and S.M.M. Mirhosseini, Effect of NaOH on the Structure and Corrosion Performance of Alumina and Silica PEO Coatings on Aluminum, J. Mater. Eng. Perform., 2012, 21(10), p 2195–2202.10.1007/s11665-012-0151-1 ↗
28. M. Laleh, R.T. Sabour and A. Shanghi, Effect of Alumina Sol Addition to Micro-arc Oxidation Electrolyte on the Properties of MAO Coatings Formed on Magnesium Alloy AZ91D, J. Alloys Compd., 2010, 496(1–2), p 548–552.10.1016/j.jallcom.2010.02.098 ↗
29. R.O. Hussein, X. Nie, D.O. Northwood, A. Yerokhin and A. Matthews, Spectroscopic Study of Electrolytic Plasma and Discharging Behaviour During the Plasma Electrolytic Oxidation (PEO) Process, J. Phys. D: Appl. Phys., 2010, 43(10), p 185–203.10.1088/0022-3727/43/10/105203 ↗
30. Y. Cheng, Z. Xue, Q. Wang, X. Wu, E. Matykina, P. Skeldon and G.E. Thompson, New Findings on Properties of Plasma Electrolytic Oxidation Coatings from Study of an Al-Cu-Li Alloy, Electrochim. Acta, 2013, 107, p 358–378.10.1016/j.electacta.2013.06.022 ↗
31. C.L. Yeh and C.W. Kuo, Effects of Al and Al4C3 Contents on Combustion Synthesis of Cr2AlC from Cr2O3-Al-Al4C3 Powder Compacts, J. Alloys Compd., 2011, 509(3), p 651–655.10.1016/j.jallcom.2010.09.169 ↗
32. G. Jang, M. Slesar and M. Besterci, Mechanismus der dispersionshärtung von aluminium mit Al4C3, Z. Werkstofftech., 1987, 18, p 36–42.10.1002/mawe.19870180208 ↗
33. S.J. Richard Prabakar, Y.H. Hwang and E.G. Bae, SnO2/Graphene Composites with Self-assembled Alternating Oxide and Amine Layers for high Li-Storage and Excellent Stability, Adv. Mater., 2013, 25(24), p 3307–3312.10.1002/adma.201301264 ↗
34. H. Fadaee and M. Javidi, Investigation on the Corrosion Behaviour and Microstructure of 2024–T3 Al Alloy Treated Via Plasma Electrolytic Oxidation, J. Alloys Compd., 2014, 604, p 36–42.10.1016/j.jallcom.2014.03.127 ↗
35. M. Shokouhfar, C. Dehghanian, M. Montazeri and A. Baradaran, Preparation of Ceramic Coating on Ti Substrate by Plasma Electrolytic Oxidation in Different Electrolytes and Evaluation of Its Corrosion Resistance: Part II, Appl. Surf. Sci., 2012, 258(7), p 2416–2423.10.1016/j.apsusc.2011.10.064 ↗
36. P. Garg, P. Gupta, D. Kumar and O. Parkash, Structural and Mechanical Properties of Graphene Reinforced Aluminum Matrix Composites, J. Mater. Environ. Sci., 2016, 7(5), p 1461–1473.
37. J. Zhao, X. Xie and C. Zhang, Effect of the Graphene Oxide Additive on the Corrosion Resistance of the Plasma Electrolytic Oxidation Coating of the AZ31 Magnesium Alloy, Corros. Sci., 2017, 114, p 146–155.10.1016/j.corsci.2016.11.007 ↗
38. W.D. Ling, P. Wei, J.Z. Duan, J.M. Chen and W.S. Duan, First-Principles Study of the Friction and Wear Resistance of Graphene Sheets, Tribol. Lett., 2017, 65, p 53–61.10.1007/s11249-017-0834-8 ↗
39. Y. Ma, H.H. Di, Z.X. Yu, L. Liang, L. Lv, Y. Pan, Y.Y. Zhang and D. Yin, Fabrication of Silica-Decorated Graphene Oxide Nanohybrids and the Properties of Composite Epoxy Coatings Research, Appl. Surf. Sci., 2016, 360(Part B), p 936–945.10.1016/j.apsusc.2015.11.088 ↗
40. W.Y. Liu, Y. Liu, C. Blawert, M.L. Zheludkevich, C.L. Fan, M. Talha and Y.H. Lin, Microstructure, Wear and Corrosion Performance of Plasma Electrolytic Oxidation Coatings Formed on D16T Al Alloy, Rare Met., 2020, 12(39), p 1425–1439.10.1007/s12598-020-01523-0 ↗
41. M. Qian, M.S. Andrew, X.H. Tan, X.T. Zeng and W.L. Sudesh, Two-Part Epoxy-Siloxane Hybrid Corrosion Protection Coatings for Carbon Steel, Thin Solid Films, 2009, 517(17), p 5237–5242.10.1016/j.tsf.2009.03.114 ↗