Influence of Friction Stir Processing on Wear, Corrosion, and Fracture Toughness Behavior of 2507 Super Duplex Stainless Steel
Source abstract
Abstract
Super duplex stainless steels (SDSS) are used in offshore applications and oil/gas plants operating under severe service conditions due to their superior mechanical and electrochemical properties. Fracture toughness, wear and corrosion resistance of a material depends largely on its microstructure and can be improved by refining the latter. Friction stir processing (FSP) can be employed to refine the microstructure of the material, resulting in superior fracture toughness, wear, and corrosion resistance. In the present research, SAF 2507 SDSS was subjected to FSP with optimized processing parameters to study the influence of FSP on fracture toughness, wear, and corrosion resistance of the material. It was observed that FSP refined alloy grains by decreasing the grain size from an average of 160 µm in the base metal to 2-30 µm in the stir zone. Refinement of grains increased the hardness of the material, which enhanced its wear resistance by more than 15%. Wear track and debris analysis revealed the change in wear mechanism of the processed material. FSP also modified the surface composition of processed material, which served to improve its corrosion resistance by more than 80%. Morphology of the corroded surfaces of base and processed material showed that the processed material was more resistant to corrosive attacks than base material. FSP enhanced the grain boundaries in the processed region which improved the fracture toughness after exposure to accelerated corrosion by about 26%. Fractographic study revealed that processed material had brittle fracture behavior while base material had ductile fracture behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. K. Nirosta, Practical Guidelines for the Fabrication of Duplex Stainless Steels, Int. Molybdenum Assoc., 2014, p. 1–68.
2. B. Wallén, Corrosion of Duplex Stainless Steels in Seawater, Avesta Corros. Manag. Appl. Eng., 1998. https://www.researchgate.net/profile/Gilberto_Thiago_Costa/post/How_does_the_passive_film.
3. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng. R Rep., 2005, 50(1), p 1–7810.1016/j.mser.2005.07.001 ↗
4. S. Emami, T. Saeid, and R.A. Khosroshahi, Microstructural Evolution of Friction Stir Welded SAF 2205 Duplex Stainless Steel, J. Alloys Compd., 2018, 739, p 678–68910.1016/j.jallcom.2017.12.310 ↗
5. S. Emami, T. Saeid, and R. Azari Khosroshahi, Microstructural Refining during Friction Stir Processing of SAF 2205 Duplex Stainless Steel, J. Ultrafine Grained Nanostruct. Mater., 2018, 51(1), p 20–25
6. M. Esmailzadeh, M. Shamanian, A. Kermanpur, and T. Saeid, Microstructure and Mechanical Properties of Friction Stir Welded Lean Duplex Stainless Steel, Mater. Sci. Eng. A, 2013, 561, p 486–49110.1016/j.msea.2012.10.068 ↗
7. T. Saeid, A. Abdollah-Zadeh, H. Assadi, and F.M. Ghaini, Effect of Friction Stir Welding Speed on the Microstructure and Mechanical Properties of a Duplex Stainless Steel, Mater. Sci. Eng. A, 2008, 496(1–2), p 262–26810.1016/j.msea.2008.05.025 ↗
8. T. Saeid, A. Abdollah-zadeh, T. Shibayanagi, K. Ikeuchi, and H. Assadi, On the Formation of Grain Structure during Friction Stir Welding of Duplex Stainless Steel, Mater. Sci. Eng. A, 2010, 527(24), p 6484–648810.1016/j.msea.2010.07.011 ↗
9. M.K. Mishra, A.G. Rao, I. Balasundar, B.P. Kashyap, and N. Prabhu, On the Microstructure Evolution in Friction Stir Processed 2507 Super Duplex Stainless Steel and Its Effect on Tensile Behaviour at Ambient and Elevated Temperatures, Mater. Sci. Eng. A, 2018, 719, p 82–9210.1016/j.msea.2018.02.032 ↗
10. Y.S. Sato, T.W. Nelson, C.J. Sterling, R.J. Steel, and C.O. Pettersson, Microstructure and Mechanical Properties of Friction Stir Welded SAF 2507 Super Duplex Stainless Steel, Mater. Sci. Eng. A, 2005, 397(1), p 376–38410.1016/j.msea.2005.02.054 ↗
11. T.F.d.A. Santos, E.A. Torres, and A.J. Ramirez, Friction Stir Welding of Duplex Stainless Steels, Weld. Int., 2018, 32(2), p 103–11110.1080/09507116.2017.1347323 ↗
12. H. Sarlak, M. Atapour, and M. Esmailzadeh, Corrosion Behavior of Friction Stir Welded Lean Duplex Stainless Steel, Mater. Des., 2015, 1980–2015(66), p 209–21610.1016/j.matdes.2014.10.060 ↗
13. P. Ajith, P. Sathiya, and S. Aravindan, Experimental Investigation on Friction Welding of UNS S32205 Duplex Stainless Steel, Acta Metall. Sin. (Engl. Lett.), 2014, 27(6), p 995–100710.1007/s40195-014-0113-8 ↗
14. M. Mishra, G. Gunasekaran, A. Rao, B. Kashyap, and N. Prabhu, Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel, J. Mater. Eng. Perform., 2017, 26(2), p 849–86010.1007/s11665-016-2470-0 ↗
15. R.A. Behnagh, M. Besharati Givi, and M. Akbari, Mechanical Properties, Corrosion Resistance, and Microstructural Changes during Friction Stir Processing of 5083 Aluminum Rolled Plates, Mater. Manuf. Process., 2012, 27(6), p 636–64010.1080/10426914.2011.593243 ↗
16. L. Pan, C.T. Kwok, and K.H. Lo, Friction-Stir Processing of AISI, 440C High-Carbon Martensitic Stainless Steel for Improving Hardness and Corrosion Resistance, J. Mater. Process. Technol., 2020, 277, p 11644810.1016/j.jmatprotec.2019.116448 ↗
17. S. Aldajah, O. Ajayi, G. Fenske, and S. David, Effect of Friction Stir Processing on the Tribological Performance of High Carbon Steel, Wear, 2009, 267(1–4), p 350–35510.1016/j.wear.2008.12.020 ↗
18. T. Mahmoud and S. Mohamed, Improvement of Microstructural, Mechanical and Tribological Characteristics of A413 cast Al Alloys Using Friction Stir Processing, Mater. Sci. Eng. A, 2012, 558, p 502–50910.1016/j.msea.2012.08.036 ↗
19. S.A. Alidokht, A. Abdollah-zadeh, S. Soleymani, T. Saeid, and H. Assadi, Evaluation of Microstructure and Wear Behavior of Friction Stir Processed Cast Aluminum Alloy, Mater. Charact., 2012, 63, p 90–9710.1016/j.matchar.2011.11.007 ↗
20. S. Thapliyal and D.K. Dwivedi, Study of the Effect of Friction Stir Processing of the Sliding Wear Behavior of Cast NiAl Bronze: A Statistical Analysis, Tribol. Int., 2016, 97, p 124–13510.1016/j.triboint.2016.01.008 ↗
21. H. Arora, H. Singh, and B. Dhindaw, Wear Behaviour of a Mg Alloy Subjected to Friction Stir Processing, Wear, 2013, 303(1–2), p 65–7710.1016/j.wear.2013.02.023 ↗
22. B. Zahmatkesh, M. Enayati, and F. Karimzadeh, Tribological and Microstructural Evaluation of Friction Stir Processed Al2024 Alloy, Mater. Des., 2010, 31(10), p 4891–489610.1016/j.matdes.2010.04.054 ↗
23. N.E. Dowling, Mechanical Behavior Of Materials: Engineering Methods for Deformation, Fracture, and Fatigue, Prentice Hall, Englewood Cliffs, 1993
24. C.P. Meinhardt, A. Scheid, J.F. dos Santos, L.A. Bergmann, M.B. Favaro, and C.E.F. Kwietniewski, Hydrogen Embrittlement under Cathodic Protection of Friction Stir Welded UNS S32760 Super Duplex Stainless Steel, Mater. Sci. Eng. A, 2017, 706, p 48–5610.1016/j.msea.2017.08.117 ↗
25. D. Fairchild et al., Research Concerning the Friction Stir Welding of Linepipe Steels, in Proceedings of the 8th International Conference on Trends in welding research, 2009, p. 371–380.
26. J.A. Avila, J. Rodriguez, P.R. Mei, and A.J. Ramirez, Microstructure and Fracture Toughness of Multipass Friction Stir Welded Joints of API-5L-X80 Steel Plates, Mater. Sci. Eng. A, 2016, 673, p 257–26510.1016/j.msea.2016.07.045 ↗
27. A. Raja and V. Pancholi, Effect of Friction Stir Processing on Tensile and Fracture Behaviour of AZ91 Alloy, J. Mater. Process. Technol., 2017, 248, p 8–1710.1016/j.jmatprotec.2017.05.001 ↗
28. S. Sharma and R. Mishra, Fatigue Crack Growth Behavior of Friction Stir Processed Aluminum Alloy, Scr. Mater., 2008, 59(4), p 395–39810.1016/j.scriptamat.2008.04.014 ↗
29. H.M. Abubaker, N. Merah, F.A. Al-Badour, J. Albinmousa, and A.A. Sorour, Influence of Friction Stir Processing on Mechanical Behavior of 2507 SDSS, Metals, 2020, 10(3), p 36910.3390/met10030369 ↗
30. ASTM International, E1820-20 Standard Test Method for Measurement of Fracture Toughness (ASTM International, West Conshohocken 2020). https://doi.org/10.1520/E1820-2010.1520/E1820-20 ↗
31. E.B. da Fonseca, T.F.A. Santos, S.T. Button, and A.J. Ramirez, Physical Simulation of a Duplex Stainless Steel Friction Stir Welding by the Numerical and Experimental Analysis of Hot Torsion Tests, Metall. Mater. Trans. A, 2016, 47(9), p 4543–455210.1007/s11661-016-3631-3 ↗
32. T. Seidel and A.P. Reynolds, Visualization of the Material Flow in AA2195 Friction-Stir Welds Using a Marker Insert Technique, Metall. Mater. Trans. A, 2001, 32(11), p 2879–288410.1007/s11661-001-1038-1 ↗
33. C.-O. Olsson and D. Landolt, Passive Films on Stainless Steels—Chemistry, Structure and Growth, Electrochim. Acta, 2003, 48(9), p 1093–110410.1016/S0013-4686(02)00841-1 ↗
34. K.D. Ralston, N. Birbilis, and C.H.J. Davies, Revealing the Relationship Between Grain Size and Corrosion Rate of Metals, Scr. Mater., 2010, 63(12), p 1201–120410.1016/j.scriptamat.2010.08.035 ↗
35. R. Magnabosco, Kinetics of Sigma Phase Formation in a Duplex Stainless Steel, Mater. Res., 2009, 12(3), p 321–32710.1590/S1516-14392009000300012 ↗
36. M.-H. Tsai, K.-Y. Tsai, C.-W. Tsai, C. Lee, C.-C. Juan, and J.-W. Yeh, Criterion for Sigma Phase Formation in Cr-and V-Containing High-Entropy Alloys, Mater. Res. Lett., 2013, 1(4), p 207–21210.1080/21663831.2013.831382 ↗
37. J. Li, X. Liu, G. Li, P. Han, and W. Liang, Characterization of the Microstructure, Mechanical Properties, and Corrosion Resistance of a Friction-Stir-Welded Joint of Hyper Duplex Stainless Steel, Metals, 2017, 7(4), p 13810.3390/met7040138 ↗
38. A. Chabok and K. Dehghani, Effect of Processing Parameters on the Mechanical Properties of Interstitial Free Steel Subjected to Friction Stir Processing, J. Mater. Eng. Perform., 2013, 22(5), p 1324–133010.1007/s11665-012-0424-8 ↗
39. T. Senda, E. Yasuda, M. Kaji, and R.C. Bradt, Effect of Grain Size on the Sliding Wear and Friction of Alumina at Elevated Temperatures, J. Am. Ceram. Soc., 1999, 82(6), p 1505–151110.1111/j.1151-2916.1999.tb01948.x ↗
40. K.-H. Zum Gahr, W. Bundschuh, and B. Zimmerlin, Effect of Grain Size on Friction and Sliding Wear of Oxide Ceramics, Wear, 1993, 162, p 269–27910.1016/0043-1648(93)90509-K ↗
41. Z. Farhat, Y. Ding, D. Northwood, and A.T. Alpas, Effect of Grain Size on Friction and Wear of Nanocrystalline Aluminum, Mater. Sci. Eng. A, 1996, 206, p 302–31310.1016/0921-5093(95)10016-4 ↗
42. J. Li, J. Wongsa-Ngam, J. Xu, D. Shan, B. Guo, and T.G. Langdon, Wear Resistance of an Ultrafine-Grained Cu-Zr Alloy Processed by Equal-Channel Angular Pressing, Wear, 2015, 326–327, p 10–1910.1016/j.wear.2014.12.022 ↗
43. G. Purcek, H. Yanar, D.V. Shangina, M. Demirtas, N.R. Bochvar, and S.V. Dobatkin, Influence of High Pressure Torsion-Induced Grain Refinement and Subsequent Aging on Tribological Properties of Cu-Cr-Zr Alloy, J. Alloys Compd., 2018, 742, p 325–33310.1016/j.jallcom.2018.01.303 ↗
44. N. Axén, S. Jacobson, and S. Hogmark, Influence of Hardness of the Counterbody in Three-Body Abrasive wear—An Overlooked Hardness Effect, Tribol. Int., 1994, 27(4), p 233–24110.1016/0301-679X(94)90003-5 ↗
45. M. Chowdhury, M. Khalil, D. Nuruzzaman, and M. Rahaman, The Effect of Sliding Speed and Normal Load on Friction and Wear Property of Aluminum, Int. J. Mech. Mechatron. Eng., 2011, 11(1), p 45–49
46. K.-H. Chung, Y.-H. Lee, H.-J. Kim, and D.-E. Kim, Fundamental Investigation of the Wear Progression of Silicon Atomic Force Microscope Probes, Tribol. Lett., 2013, 52(2), p 315–32510.1007/s11249-013-0217-8 ↗
47. B19—Wear mechanisms, in Lubrication and Reliability Handbook, M. J. Neale, Ed. Woburn: Butterworth-Heinemann, 2001, p. 1–3.10.1016/B978-075065154-7/50113-3 ↗
48. N.P. Suh, An Overview of the Delamination Theory of Wear, Wear, 1977, 44(1), p 1–1610.1016/0043-1648(77)90081-3 ↗
49. K. Hokkirigawa, K. Kato, and Z.Z. Li, The Effect of Hardness on the Transition of the Abrasive Wear Mechanism of Steels, Wear, 1988, 123(2), p 241–25110.1016/0043-1648(88)90102-0 ↗
50. B. Sattari, M. Shamanian, F. Salimijazi, and M. Salehi, Surface Modification by Friction Stir Processing of Low-Carbon Steel: Microstructure Investigation and Wear Performance, J. Mater. Eng. Perform., 2018, 27(2), p 751–76310.1007/s11665-017-3087-7 ↗
51. N.N. Aung, W. Zhou, and L.E.N. Lim, Wear Behaviour of AZ91D Alloy at Low Sliding Speeds, Wear, 2008, 265(5), p 780–78610.1016/j.wear.2008.01.012 ↗
52. T. Kayaba, K. Hokkirigawa, and K. Kato, Analysis of the Abrasive Wear Mechanism by Successive Observations of Wear Processes in a Scanning Electron Microscope, Wear, 1986, 110(3), p 419–43010.1016/0043-1648(86)90115-8 ↗
53. F. Eskandari, M. Atapour, M.A. Golozar, B. Sadeghi, and P. Cavaliere, The Microstructure and Wear Behaviour of Friction Stir Processed AISI, 430 Ferritic Stainless Steel, Tribol. Mater. Surf. Interfaces, 2019, 13(3), p 172–18110.1080/17515831.2019.1637147 ↗
54. A. Fattah-alhosseini and S. Vafaeian, Comparison of Electrochemical Behavior Between Coarse-Grained and Fine-Grained AISI, 430 Ferritic Stainless Steel by Mott–Schottky Analysis and EIS Measurements, J. Alloys Compd., 2015, 639, p 301–30710.1016/j.jallcom.2015.03.142 ↗
55. C. Ma et al., Enhancement in Mechanical Properties and Corrosion Resistance of 2507 Duplex Stainless Steel via Friction Stir Processing, J. Mater. Res. Technol., 2020, 9(4), p 8296–830510.1016/j.jmrt.2020.05.057 ↗
56. A.S. Kumar, B.R. Kumar, G.L. Datta, and V.R. Ranganath, Effect of Microstructure and Grain Size on the Fracture Toughness of a Micro-alloyed Steel, Mater. Sci. Eng. A, 2010, 527(4), p 954–96010.1016/j.msea.2009.09.027 ↗
57. A. Pineau, A.A. Benzerga, and T. Pardoen, Failure of Metals I: Brittle and Ductile Fracture, Acta Mater., 2016, 107, p 424–48310.1016/j.actamat.2015.12.034 ↗