Material-Model-Based Determination of the Shock-Hugoniot Relations in Nanosegregated Polyurea
Source abstract
Abstract
Previous experimental investigations reported in the open literature have indicated that applying polyurea external coatings and/or internal linings can substantially improve ballistic penetration resistance and blast survivability of buildings, vehicles, and laboratory/field test-plates, as well as the blast-mitigation capacity of combat helmets. The protective role of polyurea coatings/linings has been linked to polyurea microstructure, which consists of discrete hard-domains distributed randomly within a compliant/soft matrix. When this protective role is investigated computationally, the availability of reliable, high-fidelity constitutive models for polyurea is vitally important. In the present work, a comprehensive overview and a critical assessment of a polyurea material constitutive model, recently proposed by Shim and Mohr (Int J Plast 27:868-886, 2011), are carried out. The review revealed that this model can accurately account for the experimentally measured uniaxial-stress versus strain data obtained under monotonic and multistep compressive loading/unloading conditions, as well as under stress relaxation conditions. On the other hand, by combining analytical and finite-element procedures with the material model in order to define the basic shock-Hugoniot relations for this material, it was found that the computed shock-Hugoniot relations differ significantly from their experimental counterparts. Potential reasons for the disagreement between the computed and experimental shock-Hugoniot relations are identified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. M. Grujicic, T. He, and B. Pandurangan, Development and Parameterization of an Equilibrium Material Model for Segmented Polyurea, Multidiscip. Model. Mater. Struct., 2011, 7, p 96–11410.1108/15736101111157064 ↗
2. M. Grujicic, T. He, B. Pandurangan, F.R. Svingala, G.S. Settles, and M.J. Hargather, Experimental Characterization and Material-Model Development for Microphase-Segregated Polyurea: An Overview, J. Mater. Eng. Perform., 2011, 21, p 2–1610.1007/s11665-011-9875-6 ↗
3. M. Grujicic, B. Pandurangan, T. He, B.A. Cheeseman, C.-F. Yen, and C.L. Randow, Computational Investigation of Impact Energy Absorption Capability of Polyurea Coatings via Deformation-Induced Glass Transition, Mater. Sci. Eng. A, 2010, 527, p 7741–775110.1016/j.msea.2010.08.042 ↗
4. M. Grujicic, B. Pandurangan, G. Arakere, W.C. Bell, T. He, and X. Xie, Material-Modeling and Structural-Mechanics Aspects of the Traumatic Brain Injury Problem, Multidiscip. Model. Mater. Struct., 2010, 6, p 335–36310.1108/15736101011080097 ↗
5. M. Grujicic, T. He, B. Pandurangan, J. Runt, J. Tarter, and G. Dillon, Development and Parameterization of a Time-Invariant (Equilibrium) Material Model for Segmented Elastomeric Polyureas, J. Mater. Des. Appl., 2011, 225, p 182–194
6. M. Grujicic, W.C. Bell, B. Pandurangan, and T. He, Blast-Wave Impact-Mitigation Capability of Polyurea When Used as Helmet Suspension Pad Material, Mater. Des., 2010, 31, p 4050–406510.1016/j.matdes.2010.05.002 ↗
7. M. Grujicic, W.C. Bell, B. Pandurangan, and P.S. Glomski, Fluid/Structure Interaction Computational Investigation of the Blast-Wave Mitigation Efficacy of the Advanced Combat Helmet, J. Mater. Eng. Perform., 2011, 20, p 877–89310.1007/s11665-010-9724-z ↗
8. M. Grujicic, B. Pandurangan, A.E. King, J. Runt, J. Tarter, and G. Dillon, Multi-Length Scale Modeling and Analysis of Microstructure Evolution and Mechanical Properties in Polyurea, J. Mater. Sci., 2011, 46, p 1767–177910.1007/s10853-010-4998-y ↗
9. M. Grujicic, B. Pandurangan, W.C. Bell, B.A. Cheeseman, C.-F. Yen, and C.L. Randow, Molecular-Level Simulations of Shock Generation and Propagation in Polyurea, Mater. Sci. Eng. A, 2011, 528, p 3799–380810.1016/j.msea.2011.01.081 ↗
10. M. Grujicic, A. Arakere, B. Pandurangan, A. Grujicic, A.A. Littlestone, and R.S. Barsoum, Computational Investigation of Shock-Mitigation Efficacy of Polyurea when used in a Combat Helmet: A Core Sample Analysis, Multidiscip. Model. Mater. Struct., 2012, 8, p 297–33110.1108/15736101211269122 ↗
11. M. Grujicic, B.P. d’Entremont, B. Pandurangan, A. Grujicic, M. LaBerge, J. Runt, J. Tarter, and G. Dillon, A Study of the Blast-induced Brain White-Matter Damage and the Associated Diffuse Axonal Injury, Multidiscip. Model. Mater. Struct., 2012, 8, p 213–24510.1108/15736101211251220 ↗
12. A. Grujicic, M. LaBerge, M. Grujicic, B. Pandurangan, J. Runt, J. Tarter, and G. Dillon, Potential Improvements in Shock-Mitigation Efficacy of a Polyurea-Augmented Advanced Combat Helmet: A Computational Investigation, J. Mater. Eng. Perform., 2012, 21, p 1562–157910.1007/s11665-011-0065-3 ↗
13. M. Grujicic, B.P. d’Entremont, B. Pandurangan, J. Runt, J. Tarter, and G. Dillon, Concept-Level Analysis and Design of Polyurea for Enhanced Blast-Mitigation Performance, J. Mater. Eng. Perform., 2012, 21, p 2024–203710.1007/s11665-011-0117-8 ↗
14. M. Grujicic and B. Pandurangan, Meso-Scale Analysis of Segmental Dynamics in Micro-Phase Segregated Polyurea, J. Mater. Sci., 2012, 47, p 3876–388910.1007/s10853-011-6243-8 ↗
15. M. Grujicic, R. Yavari, J.S. Snipes, S. Ramaswami, J. Runt, J. Tarter, and G. Dillon, Molecular-Level Computational Investigation of Shock-Wave Mitigation Capability of Polyurea, J. Mater. Sci., 2012, 47, p 8197–821510.1007/s10853-012-6716-4 ↗
16. M. Grujicic, J.S. Snipes, S. Ramaswami, R. Yavari, J. Runt, J. Tarter, and G. Dillon, Coarse-Grained Molecular-Level Analysis of Polyurea Properties and Shock-Mitigation Potential, J. Mater. Eng. Perform., 2013, 22, p 1964–198110.1007/s11665-013-0485-3 ↗
17. T. Choi, D. Fragiadakis, C.M. Roland, and J. Runt, Microstructure and Segmental Dynamics of Polyurea Under Uniaxial Deformation, Macromolecules, 2012, 45, p 3581–358910.1021/ma300128d ↗
18. A. Castagna, A. Pangon, T. Choi, G. Dillon, and J. Runt, The Role of Soft Segment Molecular Weight on Microphase Separation and Dynamics in Bulk Polymerized Poly(tetramethylene oxide) Based Polyureas, Macromolecules, 2012, 45, p 8438–844410.1021/ma3016568 ↗
19. M. Grujicic, H. Marvi, G. Arakere, W.C. Bell, and I. Haque, The Effect of Up-Armoring the High-Mobility Multi-Purpose Wheeled Vehicle (HMMWV) on the Off-Road Vehicle Performance, Multidiscip. Model. Mater. Struct., 2010, 6(2), p 229–25610.1108/15736101011068019 ↗
20. M. Grujicic, W.C. Bell, G. Arakere, and I. Haque, Finite Element Analysis of the Effect of Up-Armoring on the Off-Road Braking and Sharp-Turn Performance of a High-Mobility Multi-Purpose Wheeled Vehicle (HMMWV), J. Automob. Eng., 2009, 223(D11), p 1419–143410.1243/09544070JAUTO1187 ↗
21. M. Grujicic, G. Arakere, H.K. Nallagatla, W.C. Bell, and I. Haque, Computational Investigation of Blast Survivability and Off-Road Performance of an Up-Armored High-Mobility Multi-Purpose Wheeled Vehicle (HMMWV), J. Automob. Eng., 2009, 223, p 301–32510.1243/09544070JAUTO1063 ↗
22. V.F. Nesterenko, Shock (Blast) Mitigation by “Soft” Condensed Matter, MRS Symp. Proc., 2002, 759, p MM 4.3.1–MM 4.3.1210.1557/PROC-759-MM4.3 ↗
23. A.J. Ryan, Spinodal Decomposition During Bulk Copolymerization: Reaction Injection Molding, Polymer, 1990, 31, p 707–71210.1016/0032-3861(90)90293-8 ↗
24. Y.A. Bahei-El-Din, G.J. Dvorak, and O.J. Fredricksen, A Blast-Tolerant Sandwich Plate Design with a Polyurea Interlayer, Int. J. Solids Struct., 2006, 43, p 7644–765810.1016/j.ijsolstr.2006.03.021 ↗
25. S.M. Walsh, R.R. Scott, and D.M. Spagnuolo, The Development of a Hybrid Thermoplastic Ballistic Material with Application to Helmets, ARL-TR-3700, Army Research Laboratory, December 2005
26. S.A. Tekalur, A. Shukla, and K. Shivakumar, Blast Resistance of Polyurea-based Layered Composite Materials, Compos. Struct., 2008, 84, p 271–28110.1016/j.compstruct.2007.08.008 ↗
27. M. Grujicic, B. Pandurangan, and B.A. Cheeseman, A Computational Analysis of Detonation of Buried Mines, Multidiscip. Model. Mater. Struct., 2006, 2, p 363–38710.1163/157361106778554851 ↗
28. M. Grujicic, B. Pandurangan, and B.A. Cheeseman, The Effect of Degree of Saturation of Sand on Detonation Phenomena Associated with Shallow-Buried and Ground-Laid Mines, Shock Vib., 2006, 13, p 41–6210.1155/2006/652405 ↗
29. M. Grujicic, B. Pandurangan, Y. Huang, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, Impulse Loading Resulting from Shallow Buried Explosives in Water-Saturated Sand, J. Mater. Des. Appl., 2007, 221, p 21–35
30. M. Grujicic, B. Pandurangan, J.D. Summers, B.A. Cheeseman, and W.N. Roy, Application of the Modified Compaction Material Model to Soil with Various Degrees of Water Saturation, Shock Vib., 2008, 15, p 79–9910.1155/2008/765494 ↗
31. M. Grujicic, B. Pandurangan, I. Haque, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, A Computational Analysis of Mine-Blast Survivability of a Soft-Skin Vehicle, Multidiscip. Model. Mater. Struct., 2007, 3, p 431–46010.1163/157361107782106348 ↗
32. M. Grujicic, B. Pandurangan, G.M. Mocko, S.T. Hung, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, A Combined Multi-Material Euler/Lagrange Computational Analysis of Blast Loading Resulting from Detonation of Buried Landmines, Multidiscip. Model. Mater. Struct., 2008, 4, p 105–12410.1163/157361108784050086 ↗
33. M. Grujicic, B. Pandurangan, R. Qiao, B.A. Cheeseman, W.N. Roy, R.R. Skaggs, and R. Gupta, Parameterization of the Porous-Material Model for Sand with Different Levels of Water Saturation, Soil Dyn. Earthq. Eng., 2008, 28, p 20–3510.1016/j.soildyn.2007.05.001 ↗
34. M. Grujicic, B. Pandurangan, N. Coutris, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, Derivation and Validation of a Material Model for Clayey Sand for Use in Landmine Detonation Computational Analysis, Multidiscip. Model. Mater. Struct., 2009, 5(4), p 311–34410.1163/157361109789807990 ↗
35. M. Grujicic, B. Pandurangan, N. Coutris, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, Computer-Simulations Based Development of a High Strain-Rate, Large-Deformation, High-Pressure Material Model for STANAG 4569 Sandy Gravel, Soil Dyn. Earthq. Eng., 2008, 28, p 1045–106210.1016/j.soildyn.2007.11.008 ↗
36. M. Grujicic, B. Pandurangan, N. Coutris, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, Derivation, Parameterization and Validation of a Sandy-Clay Material Model for Use in Landmine Detonation Computational Analyses, J. Mater. Eng. Perform., 2010, 10(3), p 434–45010.1007/s11665-009-9509-4 ↗
37. M. Grujicic, T. He, B. Pandurangan, W.C. Bell, N. Coutris, B.A. Cheeseman, W.N. Roy, and R.R. Skaggs, Development, Parameterization and Validation of a Visco-Plastic Material Model for Sand with Different Levels of Water Saturation, J. Mater. Des. Appl., 2009, 223, p 63–81
38. H.J. Qi and M.C. Boyce, Stress-Strain Behavior of Thermoplastic Polyurethanes, Mech. Mater., 2005, 37, p 817–83910.1016/j.mechmat.2004.08.001 ↗
39. A.V. Amirkhizi, J. Isaacs, J. McGee, and S. Nemat-Nasser, An Experimentally-based Viscoelastic Constitutive Model for Polyurea, Including Pressure and Temperature Effects, Philos. Mag., 2006, 86, p 5847–586610.1080/14786430600833198 ↗
40. C. Li and J. Lua, A Hyper-Viscoelastic Constitutive Model for Polyurea, Mater. Lett., 2009, 63, p 877–88010.1016/j.matlet.2009.01.055 ↗
41. T. Jiao, R.J. Clifton, and S.E. Grunschel, Pressure-Sensitivity and Constitutive Modeling of an Elastomer at High Strain Rates, 16th APS Topical Conference on Shock Compression of Condensed Matter, June 28–July 3, 200910.1063/1.3295026 ↗
42. T.M. El Sayed, “Constitutive Models for Polymers and Soft Biological Tissues,” Ph.D. Thesis, California Institute of Technology, 200810.1016/j.jbiomech.2008.02.023 ↗
43. W. Mock, S. Bartyczak, G. Lee, J. Fedderlym, and K. Jordan, Dynamic Properties of Polyurea 1000, Shock Compression of Condensed Matter, American Institute for Physics, 2009, p 1241–124410.1063/1.3295029 ↗
44. J. Shim and D. Mohr, Rate Dependent Finite Strain Constitutive Model of Polyurea, Int. J. Plast., 2011, 27, p 868–88610.1016/j.ijplas.2010.10.001 ↗
45. L.M. Yang, V.P.W. Shim, and C.T. Lim, A Visco-Hyperelastic Approach to Modeling the Constitutive Behavior of Rubber, Int. J. Impact Eng., 2000, 24, p 545–56010.1016/S0734-743X(99)00044-5 ↗
46. V.P.W. Shim, L.M. Yang, C.T. Lim, and P.H. Law, A Visco-Hyperelastic Constitutive Model to Characterize Both Tensile and Compressive Behavior of Rubber, J. Appl. Polym. Sci., 2004, 92, p 523–53110.1002/app.20029 ↗
47. M.S. Hoo Fatt and X. Ouyang, Integral-based Constitutive Equation for Rubber at High Strain Rates, Int. J. Solids Struct., 2007, 44, p 6491–650610.1016/j.ijsolstr.2007.02.038 ↗
48. J.S. Bergström and M.C. Boyce, Constitutive Modeling of the Large Strain Time-Dependent Behavior of Elastomers, J. Mech. Phys. Solids, 1998, 46, p 931–95410.1016/S0022-5096(97)00075-6 ↗
49. N. Huber and C. Tsakmakis, Finite Deformation Viscoelasticity Laws, Mech. Mater., 2000, 32, p 1–1810.1016/S0167-6636(99)00045-9 ↗
50. Y. Tomita, K. Azuma, and M. Naito, Computational Evaluation of Strain-Rate-Dependent Deformation Behavior of Rubber and Carbon-Black-Filled Rubber Under Monotonic and Cyclic Straining, Int. J. Mech. Sci., 2008, 50, p 856–86810.1016/j.ijmecsci.2007.09.010 ↗
51. M. Johlitz, H. Steeb, S. Diebels, A. Chatzouridou, J. Batal, and W. Possart, Experimental and Theoretical Investigation of Nonlinear Viscoelastic Polyurethane Systems, J. Mater. Sci., 2007, 42, p 9894–990410.1007/s10853-006-1479-4 ↗
52. E.M. Arruda and M.C. Boyce, A 3-Dimensional Constitutive Model for the Large Stretch Behavior of Rubber Elastic Materials, J. Mech. Phys. Solids, 1993, 41, p 389–41210.1016/0022-5096(93)90013-6 ↗
53. C.M. Roland, Network Recovery from Uniaxial Extension I: Elastic Equilibrium, Rubber Chem. Technol., 1989, 62, p 863–87910.5254/1.3536280 ↗
54. A.R. Johnson, C.J. Quigley, and C.E. Freese, A Viscohyperelastic Finite Element Model for Rubber, Comput. Methods Appl. Mech. Eng., 1995, 127, p 163–18010.1016/0045-7825(95)00833-4 ↗
55. S.J. Quintavalla and S.H. Johnson, Extension of the Bergstrom-Boyce Model to High Strain Rates, Rubber Chem. Technol., 2004, 77, p 972–98110.5254/1.3547863 ↗
56. J.S. Bergström and L.B. Hilbert, A Constitutive Model of Predicting the Large Deformation Thermomechanical Behavior of Fluoropolymers, Mech. Mater., 2005, 37, p 899–91310.1016/j.mechmat.2004.09.002 ↗
57. P. Areias and K. Matous, Finite Element Formulation for Modeling Nonlinear Viscoelastic Elastomers, Comput. Methods Appl. Mech. Eng., 2008, 197, p 4702–471710.1016/j.cma.2008.06.015 ↗
58. A.F.M.S. Amin, M.S. Alam, and Y. Okui, An Improved Hyperelasticity Relation in Modeling Viscoelasticity Response of Natural and High Damping Rubbers in Compression: Experiments, Parameter Identification and Numerical Verification, Mech. Mater., 2002, 34, p 75–9510.1016/S0167-6636(01)00102-8 ↗
59. G. Palm, R.B. Dupaix, and J. Castro, Large Strain Mechanical Behavior of Poly(methyl methacrylate) (PMMA) Near the Glass Transition Temperature, J. Eng. Mater. Technol., 2006, 128, p 559–56310.1115/1.2345447 ↗
60. A. Khan and H. Zhang, Finite Deformation of a Polymer: Experiments and Modeling, Int. J. Plast., 2001, 17, p 1167–118810.1016/S0749-6419(00)00073-5 ↗
61. O.U. Colak, Modeling Deformation Behavior of Polymers with Viscoplasticity Theory Based on Overstress, Int. J. Plast., 2005, 21, p 145–16010.1016/j.ijplas.2004.04.004 ↗
62. A.F.M.S. Amin, A. Lion, S. Sekita, and Y. Okui, Nonlinear Dependence of Viscosity in Modeling the Rate-Dependent Response of Natural and High Damping Rubbers in Compression and Shear: Experimental Identification and Numerical Verification, Int. J. Plast., 2006, 22, p 1610–165710.1016/j.ijplas.2005.09.005 ↗
63. A.S. Khan, O. Lopez-Pamies, and R. Kazmi, Thermo-Mechanical Large Deformation Response and Constitutive Modeling of Viscoelastic Polymers Over a Wide Range of Strain Rates and Temperatures, Int. J. Plast., 2006, 22, p 581–60110.1016/j.ijplas.2005.08.001 ↗
64. M.S. Hoo Fatt and X. Ouyang, Three-Dimensional Constitutive Equations for Styrene Butadiene Rubber at High Strain Rates, Mech. Mater., 2008, 40, p 1–1610.1016/j.mechmat.2007.06.002 ↗
65. L. Anand and N.M. Ames, On Modeling the Micro-Indentation Response of an Amorphous Polymer, Int. J. Plast., 2006, 22, p 1123–117010.1016/j.ijplas.2005.07.006 ↗
66. M.E. Gurtin, E. Fried, and L. Anand, The Mechanics and Thermodynamics of Continua, Cambridge University Press, New York, NY, 2010, p 29310.1017/CBO9780511762956 ↗
67. MATLAB, Version 8.0.0.783, R2012b, The MathWorks Inc., MA
68. ABAQUS Version 6.10EF, User Documentation, Dassault Systems, 2011
69. M. Grujicic, B. Pandurangan, W.C. Bell, and S. Bagheri, Shock-Wave Attenuation and Energy-Dissipation Potential of Granular Materials, J. Mater. Eng. Perform., 2012, 21, p 167–17910.1007/s11665-011-9954-8 ↗
70. L. Davison, Fundamentals of Shock-Wave Propagation in Solids, Springer-Verlag, Heidelberg, 2008, ISBN 978-3-540-74568-6
71. M. Grujicic, B. Pandurangan, J.S. Snipes, C-F.Yen, and B.A. Cheeseman, Multi-Length Scale Enriched Continuum-Level Material Model for Kevlar®-Fiber Reinforced Polymer-Matrix Composites, J. Mater. Eng. Perform., 2013, 22, p 681–69510.1007/s11665-012-0329-6 ↗