Computational Modeling of Microstructural-Evolution in AISI 1005 Steel During Gas Metal Arc Butt Welding
Source abstract
Abstract
A fully coupled (two-way), transient, thermal-mechanical finite-element procedure is developed to model conventional gas metal arc welding (GMAW) butt-joining process. Two-way thermal-mechanical coupling is achieved by making the mechanical material model of the workpiece and the weld temperature-dependent and by allowing the potential work of plastic deformation resulting from large thermal gradients to be dissipated in the form of heat. To account for the heat losses from the weld into the surroundings, heat transfer effects associated with natural convection and radiation to the environment and thermal-heat conduction to the adjacent workpiece material are considered. The procedure is next combined with the basic physical-metallurgy concepts and principles and applied to a prototypical (plain) low-carbon steel (AISI 1005) to predict the distribution of various crystalline phases within the as-welded material microstructure in different fusion zone and heat-affected zone locations, under given GMAW-process parameters. The results obtained are compared with available open-literature experimental data to provide validation/verification for the proposed GMAW modeling effort.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Additive Manufacturing Materials and Processes · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. A.D. Althouse, C.H. Turnquist, W.A. Bowditch, K.E. Bowditch, and M.A. Bowditch, Gas Metal Arc Welding, Modern Welding, 10th ed., Goodheart-Willcox Publisher, Tinley Park, IL, 2004, p 233–265
2. W. Zhang, J.W. Elmer, and T. DebRoy, Modeling and Real Time Mapping of Phases During GTA Welding of 1005 Steel, Mater. Sci. Eng., A, 2002, 333, p 320–33510.1016/S0921-5093(01)01857-3 ↗
3. Ø. Grong, Metallurgical Modelling of Welding, 2nd ed., The Institute of Materials, London, 1997
4. K. Easterling, Introduction to the Physical Metallurgy of Welding, 2nd ed., Butterworth Heinemann, Boston, 1992
5. L.-E. Svensson, Control of Microstructures and Properties in Steel Arc Welds, CRC Press, Boca Raton, 1994
6. R. Mancini and C. Budde, Reaustenitisation in Fe-C Steels Revisited, Acta Mater., 1999, 47, p 2907–291110.1016/S1359-6454(99)00171-8 ↗
7. R.C. Reed, T. Akbay, Z. Shen, J.M. Robinson, and J.H. Root, Determination of Reaustenitisation Kinetics in a Fe-0.4C Steel Using Dilatometry and Neutron Diffraction, Mater. Sci. Eng., A, 1998, 256, p 152–16510.1016/S0921-5093(98)00800-4 ↗
8. J.H. Valentich, Tube Type Dilatometers: Applications from Cryogenic to Elevated Temperatures Instrument Society of America, Research Triangle Park, Research Triangle Park, NC, 1981
9. J. Haidar, A Theoretical Model for Gas Metal Arc Welding and Gas Tungsten Arc Welding. I, J. Appl. Phys., 1998, 84, p 3518–352910.1063/1.368527 ↗
10. J. Haidar, Prediction of Metal Droplet Formation in Gas Metal Arc Welding. II, J. Appl. Phys., 1998, 84, p 3530–354010.1063/1.368528 ↗
11. J. Haidar, An Analysis of Heat Transfer and Fume Production in Gas Metal Arc Welding. III, J. Appl. Phys., 1998, 85, p 3448–345910.1063/1.370500 ↗
12. J. Hu and H.L. Tsai, Heat and Mass Transfer in Gas Metal Arc Welding. Part I: The Arc, Int. J. Heat Mass Transf., 2007, 50, p 833–84610.1016/j.ijheatmasstransfer.2006.08.025 ↗
13. J. Hu and H.L. Tsai, Heat and Mass Transfer in Gas Metal Arc Welding. Part II: The Metal, Int. J. Heat Mass Transf., 2007, 50, p 808–82010.1016/j.ijheatmasstransfer.2006.08.026 ↗
14. S.J. Unfried, C.M. Garzón, and J.E. Giraldo, Numerical and Experimental Analysis of Microstructure Evolution During Arc Welding in Armor Plate Steels, J. Mater. Process. Technol., 2009, 209, p 1688–170010.1016/j.jmatprotec.2008.04.025 ↗
15. H.K.D.H. Bhadeshia, Thermal History Analysis of Friction Stir Processed and Submerged Friction Stir Processed Aluminum, Met. Sci., 1982, 16, p 159–16610.1179/030634582790427217 ↗
16. K.C. Russell, Linked Flux Analysis of Nucleation in Condensed Phases, Acta Metall., 1968, 16, p 761–76910.1016/0001-6160(68)90148-X ↗
17. K.C. Russell, Grain Boundary Nucleation Kinetics, Acta Metall., 1969, 17, p 1123–113110.1016/0001-6160(69)90057-1 ↗
18. M. Takahashi and H.K.D.H. Bhadeshia, A Model for the Microstructure of Some Advanced Bainitic Steels, Mater. Trans., 1991, 32, p 689–69610.2320/matertrans1989.32.689 ↗
19. G.J. Davies and J.G. Garland, Solidification Structures and Properties of Fusion Welds, Int. Metall. Rev., 1975, 20, p 83–10810.1179/095066075790136943 ↗
20. H.K.D.H. Bhadeshia, L.-E. Svensson, and B. Gretoft, A Model for the Development of Microstructure in Low-Alloy Steel (Fe-Mn-Si-C) Weld Deposits, Acta Metall., 1985, 33, p 1271–128310.1016/0001-6160(85)90238-X ↗
21. S.J. Jones and H.K.D.H. Bhadeshia, Kinetics of the simultaneous decomposition of austenite into several transformation products, Acta Mater., 1997, 45, p 2911–292010.1016/S1359-6454(96)00392-8 ↗
22. P. Kruger, On the Relation Between Non-isothermal and Isothermal Kolmogorov-Johnson-Mehl-Avrami Crystallization Kinetics, J. Phys. Chem. Solids, 1993, 54, p 1549–155510.1016/0022-3697(93)90349-V ↗
23. M. Grujicic, B. Pandurangan, C.-F. Yen, and B.A. Cheeseman, Modifications in the AA5083 Johnson-Cook Material Model for Use in Friction Stir Welding Computational Analyses. J. Mater. Eng. Perform. 2011. doi: 10.1007/s11665-011-0118-710.1007/s11665-011-0118-7 ↗
24. M. Grujicic, G. Arakere, B. Pandurangan, J.M. Ochterbeck, C-.F. Yen, B.A. Cheeseman, A.P. Reynolds, and M.A. Sutton, Computational Analysis of Material Flow During Friction Stir Welding of AA5059 Aluminum Alloys, J. Mater. Eng. Perform. 2011, doi: 10.1007/s11665-011-0069-z10.1007/s11665-011-0069-z ↗
25. M. Grujicic, G. Arakere, A. Hariharan, B. Pandurangan, C-F.Yen and B. A. Cheeseman, “Two-level Weld-Material Homogenization Approach for Efficient Computational Analysis of Welded Structure Blast Survivability,” Journal of Materials Engineering and Performance, DOI: 10.1007/s11665-011-9876-5 , 2010.10.1007/s11665-011-9876-5 ↗
26. M. Grujicic, G. Arakere, A. Hariharan, and B. Pandurangan, A Concurrent Product-Development Approach for Friction-Stir Welded Vehicle-Underbody Structures, J. Mater. Eng. Perform., 2012, 21, p 437–44910.1007/s11665-011-9955-7 ↗
27. M. Grujicic, G. Arakere, B. Pandurangan, A. Hariharan, C.-F. Yen, B.A. Cheeseman, and C. Fountzoulas, Computational Analysis and Experimental Validation of the Ti-6Al-4V Friction Stir Welding Behavior, J. Eng. Manuf., 2010, 224, p 1–1610.1243/09544054JEM1750 ↗
28. M. Grujicic, G. Arakere, B. Pandurangan, A. Hariharan, C.-F. Yen, and B.A. Cheeseman, Development of a Robust and Cost-effective Friction Stir Welding Process for Use in Advanced Military Vehicle Structures, J. Mater. Eng. Perform., 2011, 20, p 11–2310.1007/s11665-010-9650-0 ↗
29. M. Grujicic, G. Arakere, C.-F. Yen, and B.A. Cheeseman, Computational Investigation of Hardness Evolution during Friction-Stir Welding of AA5083 and AA2139 Aluminum Alloys, J. Mater. Eng. Perform., 2011, 20, p 1097–110810.1007/s11665-010-9741-y ↗
30. M. Grujicic, G. Arakere, H.V. Yalavarthy, T. He, C.-F. Yen, and B.A. Cheeseman, Modeling of AA5083 Material-Microstructure Evolution During Butt Friction-stir Welding, J. Mater. Eng. Perform., 2010, 19, p 672–68410.1007/s11665-009-9536-1 ↗
31. M. Grujicic, T. He, G. Arakere, H.V. Yalavarthy, C.-F. Yen, and B.A. Cheeseman, Fully-Coupled Thermo-mechanical Finite-element Investigation of Material Evolution During Friction-Stir Welding of AA5083, J. Eng. Manuf., 2010, 224, p 609–62510.1243/09544054JEM1750 ↗
32. G.R. Johnson and W.H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates and High Temperatures, Proceedings of the 7th International Symposium on Ballistics, 1983
33. ABAQUS Version 6.10EF, User Documentation, Dassault Systems, 2011
34. MATLAB, The Language of Technical Computing, 7th ed., The MathWorks Inc, Natick, MA, 2006
35. M. Gore, M. Grujicic, and G.B. Olson, Thermally Activated Grain Boundary Motion Through a Dispersion of Particles, Acta Metall., 1989, 37, p 2849–285410.1016/0001-6160(89)90320-9 ↗
36. J.W. Elmer, J. Wong, and T. Ressler, Spatially Resolved X-ray Diffraction Mapping of Phase Transformations in the Heat-Affected Zone of Carbon-Manganese Steel Arc Welds, Metall. Mater. Trans. A, 2001, 32, p 1175–118710.1007/s11661-001-0127-5 ↗
37. M. Grujicic, B. Pandurangan, K.L. Koudela, and B.A. Cheeseman, A Computational Analysis of the Ballistic Performance of Light-Weight Hybrid-Composite Armors, Appl. Surf. Sci., 2006, 253, p 730–74510.1016/j.apsusc.2006.01.016 ↗
38. M. Grujicic and W.S. Owen, Models for Short Range Order in an f.c.c. Fe-Ni-Cr Alloy with a High Concentration of Nitrogen, Acta Metall. Mater., 1995, 43, p 4201–421110.1016/0956-7151(95)00107-7 ↗