Microstructure of Vacuum-Brazed Joints of Super-Ni/NiCr Laminated Composite Using Nickel-Based Amorphous Filler Metal
Source abstract
Abstract
Vacuum brazing of super-Ni/NiCr laminated composite and Cr18-Ni8 stainless steel was carried out using Ni-Cr-Si-B amorphous filler metal at 1060, 1080, and 1100 °C, respectively. Microstructure and phase constitution were investigated by means of optical and scanning electron microscopy, energy-dispersive spectroscopy, x-ray diffraction, and micro-hardness tester. When brazed at 1060-1080 °C, the brazed region can be divided into two distinct zones: isothermally solidified zone (ISZ) consisting of γ-Ni solid solution and athermally solidified zone (ASZ) consisting of Cr-rich borides. Micro-hardness of the Cr-rich borides formed in the ASZ was as high as 809 HV50 g. ASZ decreased with increase of the brazing temperature. Isothermal solidification occurred sufficiently at 1100 °C and an excellent joint composed of γ-Ni solid solution formed. The segregation of boron from ISZ to residual liquid phase is the reason of Cr-rich borides formed in ASZ. The formation of secondary precipitates in diffusion-affected zone is mainly controlled by diffusion of B.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · High Entropy Alloys Studies · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. G. Wang, B. Zhang, and J. Feng, Recent Research Progress in Welding Repair Technology About Nickel-Base Superalloy Blade, Weld. Join., 2008, 1, p 20–23
2. N. Wu, Y. Li, and J. Wang, Vacuum Brazing of Super-Ni/NiCr Laminated Composite to Cr18-Ni8 Steel with NiCrP Filler Metal, J. Mater. Process. Technol., 2012, 212, p 794–80010.1016/j.jmatprotec.2011.11.003 ↗
3. C. Xia, Y. Li, U.A. Puchkov, and J. Wang, Microstructure of Welding Zone of Super-Ni Laminated Composite and 18-8 Steel TIG Joint, Chin. J. Nonferrous Met., 2010, 20(6), p 1149–1153
4. E. Lugscheider, and H. Zhuang, High Temperature Brazing, 1st ed., G. Song, Ed., National Defence Industry Press, Beijing, 1989, p 29–30
5. F. Jalilian, M. Jahazi, and R.A.L. Drew, Microstructural Evolution During Transient Liquid Phase Bonding of Inconel 617 Using Ni-Si-B Filler Metal, Mater. Sci. Eng., A, 2006, 423, p 269–28110.1016/j.msea.2006.02.030 ↗
6. M. Pouranvari, A. Ekrami, and A.H. Kokabi, Effect of Bonding Temperature on Microstructure Development During TLP Bonding of a Nickel Base Superalloy, J. Alloys Compd., 2009, 469, p 270–27510.1016/j.jallcom.2008.01.101 ↗
7. M. Pouranvari, A. Ekrami, and A.H. Kokabi, Microstructure Development During Transient Liquid Phase Bonding of GTD-111 Nickel-Based Superalloy, J. Alloys Compd., 2008, 461, p 641–64710.1016/j.jallcom.2007.07.108 ↗
8. O.A. Idowu, N.L. Richards, and M.C. Chaturvedi, Effect of Bonding Temperature on Isothermal Solidification Rate During Transient Liquid Phase Bonding of Inconel 738LC Superalloy, Mater. Sci. Eng., A, 2005, 397, p 98–11210.1016/j.msea.2005.01.055 ↗
9. K. Tokoro, N.P. Wikstrom, O.A. Ojo, and M.C. Chaturvedi, Variation in Diffusion-Induced Solidification Rate of Liquated Ni-Cr-B Insert During TLP Bonding of Waspaloy Superalloy, Mater. Sci. Eng., A, 2008, 477, p 311–31810.1016/j.msea.2007.05.069 ↗
10. A. Kar, S. Chaudhuri, P.K. Sen, and A.K. Ray, Evaluation of Hardness of the Interfacial Reaction Products at the Alumina-Stainless Steel Brazed Interface by Modeling of Nanoindentation Results, Scripta Mater., 2007, 57, p 881–88410.1016/j.scriptamat.2007.06.022 ↗