Effects of Micro-arc Oxidation/Multi-arc Ion Plating Composite Treatment on Microstructure and Properties of TC4 Titanium Alloy
Source abstract
Abstract
TC4 titanium alloy was treated by micro-arc oxidation (MAO) technology, and then CrN coating was prepared on the surface of MAO coating by multi-arc ion plating (MAIP) technology to form MAO/CrN composite film, so as to improve the tribological properties of TC4. The microstructure and phase composition of the film were detected and analyzed by scanning electron microscopy (SEM) and x-ray diffraction (XRD). The surface roughness, bonding strength and tribological properties of the film were evaluated by using a roughness tester, an automatic scratch tester for coating adhesion, a multi-functional friction and wear tester and a three-dimensional ultra-depth-of-field microscope system. The results show that the tribological properties of TC4 are improved after micro-arc oxidation treatment. The friction coefficient of TC4 is about 0.6, the friction coefficient of TC4/MAO is about 0.5, and the friction coefficient of TC4/MAO/CrN is about 0.2. The surface roughness of TC4/MAO/CrN is only 1.4 μm. The composite layer exhibits excellent tribological properties. The wear mechanism of TC4, TC4/MAO coating and TC4/MAO/CrN coating is abrasive wear.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. J.M. Luo, X.H. Wu, and J.L. Xu, Electrolytic Composition on Wear Resistance and Corrosion Resistance of the Micro-arc Oxidation Coatings on TiCP/Ti6Al4V Composites, J. Inorg. Mater., 2017, 32(04), p 418–424.10.15541/jim20160355 ↗
2. G.L. Wu, Y. Wang, M. Sun, Q.L. Zhang,, and J.H. Yao, Influence of Microstructure of TC4 Substrate on the MAO Coating, Surf. Eng., 2019, 36(8), p 827–836.10.1080/02670844.2019.1693732 ↗
3. A.O. Krivenkov, S.N. Chugunov, D.B. Kryukov, A.N. Baranov, and M.S. Gus’kov, Tribological Properties of Composite Materials Based on Titanium Prepared by High-Energy Action Methods, Metallurgist, 2015, 59(7–8), p 640–644.10.1007/s11015-015-0152-z ↗
4. Y.Z. Shen, H.J. Tao, Y.B. Lin, X.F. Zeng, T. Wang, J. Tao, and L. Pan, Fabrication and Wear Resistance of TiO2/Al2O3 Coatings by Micro-arc Oxidation, Rare Metal Mater. Eng., 2017, 46(01), p 23–27.10.1016/S1875-5372(17)30071-1 ↗
5. S.P. Wang, L. Zhou, C.J. Li, Z.X. Li, and H.Z. Li, Morphology and Wear Resistance of Composite Coatings Formed on a TA2 Substrate Using Hot-Dip Aluminising and Micro-Arc Oxidation Technologies, Materials, 2019, 12(5), p 799.10.3390/ma12050799 ↗
6. C. Zhang, Y. Yang, L.L. Miao, Y.D. Ma, X. Zhang, Y.H. Cui, Y.C. Dong, X.G. Chen, L. Wang, Z. Liu, and Y. Wang, Microstructure and Properties of Al2O3-Y2O3 Ceramic Composite Coatings Fabricated by plasma Spraying, Surf. Coat. Technol., 2018, 350, p 550–559.10.1016/j.surfcoat.2018.07.043 ↗
7. A. Hatem, J. Lin, R. Wei, R.D. Torres, C. Laurindo, G.B. de Souza, and P. Soares, Tribocorrosion Behavior of Low Friction TiSiCN Nanocomposite Coatings Deposited on Titanium Alloy for Biomedical Applications, Surf. Coat. Technol., 2018, 347, p 1–12.10.1016/j.surfcoat.2018.04.049 ↗
8. C. Lin, and L.C. Zhao, Electroless Ni-P Wear-Resistant Coating on TC4 Titanium Alloy, Rare Metal Mater. Eng., 2013, 42(03), p 507–512.
9. Q. Xu, Y. Liu, and T. Ding, Research Progress of Laser Cladding Wear Resistant Coating Materials on Titanium Alloy Surface, Hot Work. Technol., 2021, 10(04), p 1–6.
10. Y. Liu and W.G. Zhang, Preparation and Characteristics of Patterned TiO2 Thin Film on TC4 Made by Sol–Gel Method, J. Med. Biomech., 2010, 25(1), p 21–25.
11. L. Wang, M. Wang, and H. Chen, Corrosion Mechanism Investigation of TiAlN/CrN Superlattice Coating by Multi-arc Ion Plating in 3.5wt% NaCl Solution, Surf. Coat. Technol., 2021, 391(15), p 68–77.
12. J.K. Yan, G. Yang, W.X. Tang, Y.F. Wu, S.M. Fang, and Z. Shi, Effect of Applied Voltage on Performance of Anodic Oxidation Films of TiO2 on TC4 Alloy, Chin. J. Mater. Res., 2015, 29(12), p 895–903.
13. Q.Q. Guo, D.P. Xu, W. Yang, Y.C. Guo, Z. Yang, J.P. Li, P. Gao, Synthesis, Corrosion, and Wear Resistance of a Black Microarc Oxidation Coating on Pure Titanium. Surf. Coat. Technol., 2019, 386.10.1016/j.surfcoat.2020.125454 ↗
14. A.I. Costa, L. Sousa, A.C. Alves, F. Toptan F, Tribocorrosion Behaviour of Bio-Functionalized Porous Ti Surfaces Obtained by Two-Step Anodic Treatment. Corros. Sci., 2019.10.1016/j.corsci.2020.108467 ↗
15. N. Ao, D.X. Liu, S.X. Wang, Q. Zhao, X.H. Zhang, and M.M. Zhang, Microstructure and Tribological Behavior of a TiO2/hBN Composite Ceramic Coating Formed via Micro-arc Oxidation of Ti-6Al-4V Alloy, J. Mater. Sci. Technol., 2016, 32(10), p 1071–1076.10.1016/j.jmst.2016.06.015 ↗
16. C. Wang, F. Ma, L. Ping et al., The Influence of Alloy Elements in Ti-6Al-4V and Ti-35Nb-2Ta-3Zr on the Structure, Morphology and Properties of MAO Coatings, Vacuum, 2018, 157, p 229–236.10.1016/j.vacuum.2018.08.054 ↗
17. S.-F. Hsieh, Ou. Shih-Fu, and C.-K. Chou, The Influence of the Substrate on the Adhesive Strength of the Micro-arc Oxidation Coating Developed on TiNi Shape Memory Alloy, Appl. Surf. Sci., 2017, 392, p 581–589.10.1016/j.apsusc.2016.09.001 ↗
18. S.L. Ma, P.Y. Zhang, X.H. Zhu, H.F. Yu, J.G. Fu, and C.S. Ma, Research Progress of Wear-resistant Antifriction Coating Based on Micro-arc Oxidation Technology, Surf. Technol., 2020, 49(06), p 104–113.
19. Q.B. Li, W.B. Yang, D.A. Wang, and J. Liang, Recent Advances of Wear Resistant and Lubricating Micro-arc Oxidation Coatings on Titanium Alloys, Mater. Prot., 2017, 50(08), p 63–67.
20. F.B. Liu, D.C. Sun, Y. Cui, L.G. Cao, and Y. Yang, Tribological Behaviors of Ceramic Coatings Fabricated by Micro-arc Oxidation with Addition of SiC Micro-particles for Ti-6A1-4V Alloys, Rare Metal Mater. Eng., 2018, 47(04), p 1314–1318.
21. Z.H. Yang, N. Wang, Y.N. Chen, L. Zhang, H. Chen, J.M. Hao, Y.Q. Zhao, C.X. Shi, and W.L. Shi, TC4 Study on Self-lubricating MoS/TiO, Coating Synthesized on TC4 Surface by Micro-arc Oxidation, Rare Metal Mater. Eng., 2020, 49(09), p 3195–3202.
22. S.C. Di, J. Yu, Y. Wang et al., Study on Thermal Conduction and Laser Remelting Behavior of Porous Micro Arcoxidation Film Layer, Rare Metal Mater. Eng., 2014, 6, p 1432–1436.
23. S.G. Tang, Q.Z. Chen, Z.Q. Jiang et al., Effect of Laser Remelting Treatment on Microstructure and Properties of Aluminum Alloy Micro-arc Oxidation Coatings, J. Mater. Eng., 2018, 46(12), p 161–168.
24. Z.B. Xu and L. Lang, Exploration of Corrosion Resistance of MA0 and Sol–Gel Eomposite Film Layer of Medical Titanium Alloys, China Med. Equip., 2019, 16(04), p 48–51.
25. C.C. Ji, Q.Q. Guo, J.P. Li, Y.C. Guo, Z. Yang, W. Yang, D.P. Xu, and B. Yang, Microstructure and properties of CrN coating via multi-arc ion plating on the valve seat material surface, J. Alloys Compd., 2022, 891, p 161966.10.1016/j.jallcom.2021.161966 ↗
26. Q.Q. Guo, J.P. Li, Y.C. Guo, and Z. Yang, Research of Corrosion Resistance of (Ti, Cr)N Coatings Deposited by Multi-arc Ion Plating, Plat. Finish., 2017, 39(08), p 6–9.
27. Y.M. Wang, Y.C. Zou, S.Q. Wang, G.L. Chen, J.H. Ouyang, D.Q. Wei, D.C. Jia, and Y. Zhou, Design, Fabrication and Performance of Multifuctional Ceramic Coatings Formed by Microarc Oxidation on Metals: A Critial Review, China Surf. Eng., 2018, 31(04), p 20–45.
28. J.K. Yan, E.X. Ni, W.X. Tang, Y.F. Wu, Z. Shi, and S.M. Fang, Yang Gang, Preparation of Porous Bioceramic Films on TC4 Surface by a Combinated Oxidation Method, Rare Metal Mater. Eng., 2016, 45(S1), p 93–97.
29. K. Zhou, F.Q. Xie, X.Q. Wu, and S.Q. Wang, Research Progress on Tribological Properties of Micro Arc Oxidation Coatings on Aluminum, Magnesium and Titanium Based Materia, Rare Metal Mater. Eng., 2019, 48(11), p 3753–3763.
30. K. Li, X.S. Fu, J.J. Hu, and W.L. Zhou, Fretting Wear Behavior of Ceramic Coating Prepared by Micro-arc Oxidation on TC4 Alloy, Rare Metal Mater. Eng., 2017, 46(03), p 765–769.
31. H. Tekdir and A.F. Yetim, Additive Manufacturing of Multiple Layered Materials (Ti6Al4V/316L) and Improving Their Tribological Properties with Glow Discharge Surface Modification, Vacuum, 2020, 184, p 109893.10.1016/j.vacuum.2020.109893 ↗
32. T. Yetim, K. Turalioğlu, M. Taftali et al., Synthesis and Characterization of Wear and Corrosion Resistant Ni-Doped Al2O3 Nanocomposite Ceramic Coatings by Sol–Gel Method, Surf. Coat. Technol., 2022, 444, p 128659.10.1016/j.surfcoat.2022.128659 ↗