Multi-parameter Optimization of Laser Cladding 15-5PH Using TOPSIS-GRA Based on Combined Weighting Method
Source abstract
Abstract
As a martensitic precipitation-hardening stainless steel of high strength, high hardness, and excellent corrosion resistance, 15-5PH stainless steel can be used in laser cladding to repair components or improve surface performance. The cladding layer is affected by the process parameters directly. A Taguchi experiment (L25) of 15-5PH powder laser cladding is carried out on the surface of 45# steel to study the optimization of laser cladding process parameters. Analytic Hierarchy Process and Entropy Weighting Method are combined to determine the weight of each response index, the comprehensive Technique for Order Preference by Similarity to Ideal Solution and Grey Relational Analysis are integrated to obtain a better geometric performance of the cladding layer. The Analysis of Variance shows that the scanning speed is the most significant parameter on the performance of 15-5PH cladding layer. The validation experiments shows that under the optimal process parameters, the three geometric performance responses of the cladding layer have been improved as expected. The optimized cladding layer has obvious advantages in geometry morphology and properties, which verified the feasibility of the optimization method.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. L. Couturier, F.D. Geuser, M. Descoins and A. Deschamps, Evolution of the Microstructure of a 15-5PH Martensitic Stainless Steel During Precipitation Hardening Heat Treatment, Mater. Des., 2016, 107, p 416–425.10.1016/j.matdes.2016.06.068 ↗
2. A. Alafaghani, A. Qattawi, S. Jaman and M.A. Ablat, Microstructure and Mechanical Properties of Direct Metal Laser-Sintered 15–5PH Steel with Different Solution Annealing Heat Treatments, Int. J. Adv. Manuf. Technol., 2019, 105(7), p 3499–3520.10.1007/s00170-019-04404-8 ↗
3. T. Weinberger, N. Enzinger and H.-H. Cerjak, Microstructural and Mechanical Characterisation of Friction Stir Welded 15–5PH Steel, Sci. Technol. Weld. Join., 2009, 14(3), p 210–215.10.1179/136217109X406956 ↗
4. H. Luo, Q. Yu, C. Dong, G. Sha, Z. Liu, J. Liang, L. Wang, G. Han and X. Li, Influence of the Aging Time on the Microstructure and Electrochemical Behaviour of a 15–5ph Ultra-High Strength Stainless Steel, Corrosion Sci., 2018, 139, p 185–196.10.1016/j.corsci.2018.04.032 ↗
5. W. Gao, D. Wang, F. Cheng, X. Di, C. Deng and W. Xu, Microstructural and Mechanical Performance of Underwater Wet Welded S355 Steel, J. Mater. Process. Technol., 2016, 238, p 333–340.10.1016/j.jmatprotec.2016.07.039 ↗
6. Y. Wang, R. Kannan and L. Li, Characterization of As-Welded Microstructure of Heat-Affected Zone in Modified 9Cr–1Mo–V–Nb Steel Weldment, Mater. Charact., 2016, 118, p 225–234.10.1016/j.matchar.2016.05.024 ↗
7. M.Z. Ibrahim, A.A.D. Sarhan, T.Y. Kuo, F. Yusuf, M. Hamdi and C.S. Chien, Investigate the Effects of the Substrate Surface Roughness on the Geometry, Phase Transformation, and Hardness of Laser-Cladded Fe-Based Metallic Glass Coating, Int. J. Adv. Manuf. Technol., 2018, 98(5–8), p 1977–1987.10.1007/s00170-018-2354-6 ↗
8. Y. Cheng, R. Cui, H. Wang and Z. Han, Effect of Processing Parameters of Laser on Microstructure and Properties of Cladding 42CrMo Steel, Int. J. Adv. Manuf. Technol., 2018, 96(5–8), p 1715–1724.10.1007/s00170-017-0920-y ↗
9. D. Shu, Z. Li, K. Zhang, C. Yao, D. Li and Z. Dai, In Situ Synthesized High Volume Fraction WC Reinforced Ni-Based Coating by Laser Cladding, Mater. Lett., 2017, 195, p 178–181.10.1016/j.matlet.2017.02.076 ↗
10. J. Lei, C. Shi, S. Zhou, Z. Gu and L.-C. Zhang, Enhanced Corrosion and Wear Resistance Properties of Carbon Fiber Reinforced Ni-Based Composite Coating by Laser Cladding, Surf. Coat. Technol., 2018, 334, p 274–285.10.1016/j.surfcoat.2017.11.051 ↗
11. X. Jiao, J. Wang, C. Wang, Z. Gong, X. Pang and S.M. Xiong, Effect of Laser Scanning Speed on Microstructure and Wear Properties of T15M Cladding Coating Fabricated by Laser Cladding Technology, Opt. Lasers Eng., 2018, 110, p 163–171.10.1016/j.optlaseng.2018.05.024 ↗
12. D.M. Goodarzi, J. Pekkarinen and A. Salminen, Analysis of Laser Cladding Process Parameter Influence on the Clad Bead Geometry, Weld. World, 2017, 61(5), p 883–891.10.1007/s40194-017-0495-0 ↗
13. S. Nam, H. Cho, C. Kim and Y.-M. Kim, Effect of Process Parameters on Deposition Properties of Functionally Graded STS 316/Fe Manufactured by Laser Direct Metal Deposition, Metals, 2018, 8(8), p 607.10.3390/met8080607 ↗
14. T. Yu, L. Yang, Y. Zhao, J. Sun and B. Li, Experimental Research and Multi-Response Multi-Parameter Optimization of Laser Cladding Fe313, Opt. Laser Technol., 2018, 108, p 321–332.10.1016/j.optlastec.2018.06.030 ↗
15. B. Yang, Y. Lai, X. Yue, D. Wang and Y. Zhao, Parametric Optimization of Laser Additive Manufacturing of Inconel 625 Using Taguchi Method and Grey Relational Analysis, Scanning, 2020, 2020, p 9176509.10.1155/2020/9176509 ↗
16. Y. Chen, X. Wang, Y. Zhao, B. Song and T. Yu, Interactive Optimization of Process Parameters and Coating Analysis of Laser Cladding JG-3 Powder, Int. J. Adv. Manuf. Technol., 2020, 107(5–6), p 2623–2633.10.1007/s00170-020-05155-7 ↗
17. G. Lian, H. Zhang, Y. Zhang, C. Chen, X. Huang and J. Jiang, Control and Prediction of Forming Performance in Curved Surface Multi-Track Laser Cladding with Curve Paths, Int. J. Adv. Manuf. Technol., 2020, 106(9–10), p 3669–3682.10.1007/s00170-019-04893-7 ↗
18. S. Peng, T. Li, J. Zhao, S. Lv, G.Z. Tan, M. Dong and H. Zhang, Towards Energy and Material Efficient Laser Cladding Process: Modeling and Optimization Using a Hybrid TS-GEP Algorithm and the NSGA-II, J. Clean. Prod., 2019, 227, p 58–69.10.1016/j.jclepro.2019.04.187 ↗
19. S. Zhu, W. Chen, X. Zhan, L. Ding and E. Wang, Optimization of Dilution Rate of Laser Cladding Repair Based on Deep Learning, Int. J. Adv. Manuf. Technol., 2020, 110(5–6), p 1471–1484.10.1007/s00170-020-05969-5 ↗
20. M. Ma, W. Xiong, Y. Lian, D. Han, C. Zhao and J. Zhang, Modeling and Optimization for Laser Cladding Via Multi-Objective Quantum-Behaved Particle Swarm Optimization Algorithm, Surf. Coat. Technol., 2019, 381, p 125129.10.1016/j.surfcoat.2019.125129 ↗
21. H.-P. Nguyen, V.-D. Pham and N.-V. Ngo, Application of TOPSIS to Taguchi Method for Multi-Characteristic Optimization of Electrical Discharge Machining with Titanium Powder Mixed into Dielectric Fluid, Int. J. Adv. Manuf. Technol., 2018, 98(5–8), p 1179–1198.10.1007/s00170-018-2321-2 ↗
22. P. Wang, Z. Zhu and Y. Wang, A Novel Hybrid MCDM Model Combining the SAW, TOPSIS and GRA Methods Based on Experimental Design, Inf. Sci., 2016, 345, p 27–45.10.1016/j.ins.2016.01.076 ↗
23. J. Marzban, P. Ghaseminejad, M.H. Ahmadzadeh and R. Teimouri, Experimental Investigation and Statistical Optimization of Laser Surface Cladding Parameters, Int. J. Adv. Manuf. Technol., 2015, 76(5), p 1163–1172.10.1007/s00170-014-6338-x ↗
24. S. Yousefzadeh, K. Yaghmaeian, A.H. Mahvi, S. Nasseri, N. Alavi and R. Nabizadeh, Comparative Analysis of Hydrometallurgical Methods for the Recovery of Cu From Circuit Boards: Optimization Using Response Surface and Selection of the Best Technique by Two-Step Fuzzy AHP-TOPSIS Method, J. Clean Prod., 2020, 249, p 119401.10.1016/j.jclepro.2019.119401 ↗
25. X. Zhang, X. Ao, W. Cai, Z. Jiang and H. Zhang, A Sustainability Evaluation Method Integrating the Energy, Economic and Environment in Remanufacturing Systems, J. Clean. Prod., 2019, 239, p 118100.10.1016/j.jclepro.2019.118100 ↗
26. V. Ocelik, N. Janssen, S. Smith and J.T.M.D. Hosson, Additive Manufacturing of High-Entropy Alloys by Laser Processing, JOM, 2016, 68(7), p 1810–1818.10.1007/s11837-016-1888-z ↗
27. M. Ansari, R.S. Razavi and M. Barekat, An Empirical-Statistical Model for Coaxial Laser Cladding of NiCrAlY Powder on Inconel 738 Superalloy, Opt. Laser Technol, 2016, 86, p 136–144.10.1016/j.optlastec.2016.06.014 ↗
28. T.R. Walker, C.J. Bennett, T.L. Lee and A.T. Clare, A Validated Analytical-Numerical Modelling Strategy to Predict Residual Stresses in Single-Track Laser Deposited IN718, Int. J. Mech. Sci., 2019, 151, p 609–621.10.1016/j.ijmecsci.2018.12.004 ↗
29. Y. Du, G. Wu, Y. Tang, H. Cao and S. Liu, Reliability Allocation Method for Remanufactured Machine Tools Based on Fuzzy Evaluation Importance and Failure Influence, Int. J. Precis. Eng. Manuf. Green Technol., 2020, 194, p 1–12.
30. C. Wang, Y. Gao, Z. Zeng and Y. Fu, Effect of Rare-Earth on Friction and Wear Properties of Laser Cladding Ni-Based Coatings on 6063Al, J. Alloys Compd., 2017, 727, p 278–285.10.1016/j.jallcom.2017.08.101 ↗
31. S. Yan, D. Wu, F. Niu, Y. Huang, N. Liu and G. Ma, Effect of Ultrasonic Power on Forming Performance of Nano-Sized Al2o3-ZrO2 Eutectic Ceramic Via Laser Engineered Net Shaping (LENS), Ceram. Int., 2018, 44(1), p 1120–1126.10.1016/j.ceramint.2017.10.067 ↗
32. J.Z. Lu, J. Cao, H.F. Lu, L.Y. Zhang and K.Y. Luo, Wear Properties and Microstructural Analyses of Fe-Based Coatings with Various WC Contents on H13 Die Steel by Laser Cladding, Surf. Coat. Technol., 2019, 369, p 228–237.10.1016/j.surfcoat.2019.04.063 ↗
33. T.E. Abioye, D.G. McCartney and A.T. Clare, Laser Cladding of Inconel 625 Wire for Corrosion Protection, J. Mater. Process. Technol., 2015, 217, p 232–240.10.1016/j.jmatprotec.2014.10.024 ↗
34. D. Bartkowski, A. Młynarczak, A. Piasecki, B. Dudziak, M. Gościański and A. Bartkowska, Microstructure, Microhardness and Corrosion Resistance of Stellite-6 Coatings Reinforced with WC Particles Using Laser Cladding, Opt. Laser Technol., 2015, 68(68), p 191–201.10.1016/j.optlastec.2014.12.005 ↗
35. L. Yang, C. Yan, C. Han, P. Chen, S. Yang and Y. Shi, Mechanical Response of a Triply Periodic Minimal Surface Cellular Structures Manufactured by Selective Laser Melting, Int. J. Mech. Sci., 2018, 148, p 149–157.10.1016/j.ijmecsci.2018.08.039 ↗