Influence of Heat Treatment on Corrosion–Wear Behavior of Ni-Based Coating in Artificial Seawater
Source abstract
Abstract
NiCrAlY coatings were fabricated by atmospheric plasma spraying. The influence of the heat treatment on the corrosion–wear behavior of the coatings in artificial seawater was investigated. The microstructure of the coatings became denser and more homogeneous after the heat treatment. After heat treatment at 1100 °C, the coating had the fewest pores and cracks and the oxide dispersive strengthening phase of Y2O3 was clearly increased to form a layer approximately 10 nm thick and uniformly distributed in the matrix. The heat treatment effectively improved the microhardness and corrosion–wear properties of the coatings. This coating had the highest microhardness of 371.1 HV, the lowest friction coefficient, and a wear rate of 0.24 and 1.01 × 10−6 mm3/Nm and the lowest corrosion rate after heat treatment at 1100 °C, giving it excellent corrosion–wear properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. H. Bakhsheshi-Rad, E. Hamzah, A. Ismail, M. Daroonparvar, M. Yajid, and M. Medraj, Preparation and Characterization of NiCrAlY/Nano-YSZ/PCL Composite Coatings Obtained by Combination of Atmospheric Plasma Spraying and Dip Coating on Mg-Ca Alloy. J. Alloy. Compd.658, 440–452 (2016)10.1016/j.jallcom.2015.10.196 ↗
2. G. Bolelli, A. Candeli, L. Lusvarghi, A. Ravaux, K. Cazes, A. Denoirjean, S. Valette, C. Chazelas, E. Meillot, and L. Bianchi, Tribology of NiCrAlY+Al2O3 Composite Coatings by Plasma Spraying with Hybrid Feeding of Dry Powder+Suspension. Wear344–345, 69–85 (2015)10.1016/j.wear.2015.10.014 ↗
3. M. Daroonparvar, M. Yajid, N. Yusof, and H. Bakhsheshi-Rad, Fabrication and Properties of triplex NiCrAlY/Nano Al2O3·13%TiO2/nano TiO2 Coatings on a Magnesium Alloy by Atmospheric Plasma Spraying Method. J. Alloy. Compd.645, 450–466 (2015)10.1016/j.jallcom.2015.05.106 ↗
4. B. Li, Y. Gao, M. Han, H. Guo, W. Wang, and J. Jia, Microstructure and Tribological Properties of NiCrAlY-Mo-Ag Composite by Vacuum Hot-Press Sintering. Vacuum143, 1–6 (2017)10.1016/j.vacuum.2017.05.024 ↗
5. K. Slámečka, L. Celko, P. Skalka, J. Pokluda, K. Nemec, M. Julis, L. Klakurkova, and J. Svejcar, Bending Fatigue Failure of Atmospheric-Plasma-Sprayed CoNiCrAlY+YSZ Thermal Barrier Coatings. Int. J. Fatigue70, 186–195 (2015)10.1016/j.ijfatigue.2014.09.009 ↗
6. L. Zhou, W. Zhou, F. Luo, J. Su, D. Zhu, and Y. Dong, Microwave Dielectric Properties of Low Power Plasma Sprayed NiCrAlY/Al2O3 Composite Coatings. Surf. Coat. Technol.210, 122–126 (2012)10.1016/j.surfcoat.2012.09.002 ↗
7. L. Du, W. Zhang, W. Zhang, T. Zhang, H. Lan, and C. Huang, Tribological and Oxidation Behaviors of the Plasma Sprayed NiCoCrAlY-Cr2O3-AgVO3 Coating. Surf. Coat. Technol.298, 7–14 (2016)10.1016/j.surfcoat.2016.04.042 ↗
8. B. Li, J. Jia, M. Han, Y. Gao, W. Wang, and C. Li, Microstructure, Mechanical and Tribological Properties of Plasma-Sprayed NiCrAlY-Mo-Ag Coatings from Conventional and Nanostructured Powders. Surf. Coat. Technol.324, 552–559 (2017)10.1016/j.surfcoat.2017.06.034 ↗
9. L. Alecrim, J. Ferreira, C. Gutierrez-Gonzalez, M. Salvador, A. Borrell, and E. Pallone, Sliding Wear Behavior of Al2O3-NbC Composites Obtained by Conventional and Nonconventional Techniques. Tribol. Int.110, 216–221 (2017)10.1016/j.triboint.2017.02.028 ↗
10. P. Gao, S. Cao, J. Li, Z. Yang, Y. Guo, and Y. Wang, High Temperature Oxidation Resistance of M42C Stainless Steel Coatings Deposited on the Surface of Cast Iron Through Atmospheric Plasma Spraying. J. Alloy. Compd.684, 188–194 (2016)10.1016/j.jallcom.2016.05.181 ↗
11. B. Li, J. Jia, Y. Gao, M. Han, and W. Wang, Microstructural and Tribological Characterization of NiAl Matrix Self-lubricating Composite Coatings by Atmospheric Plasma Spraying. Tribol. Int.109, 563–570 (2017)10.1016/j.triboint.2017.01.031 ↗
12. L. Liu, J. Xiao, X. Wei, Y. Ren, G. Zhang, and C. Zhang, Effects of Temperature and Atmosphere on Microstructure and Tribological Properties of Plasma Sprayed FeCrBSi Coatings. J. Alloy. Compd.753, 586–594 (2018)10.1016/j.jallcom.2018.04.247 ↗
13. Y. Wang, J. Stella, G. Darut, T. Poirier, and H. Liao, APS Prepared NiCrBSi-YSZ Composite Coatings for Protection Against Cavitation Erosion. J. Alloy. Compd.699, 1095–1103 (2017)10.1016/j.jallcom.2017.01.034 ↗
14. J. Chen, Y. An, J. Yang, X. Zhao, F. Yan, H. Zhou, and J. Chen, Tribological Properties of Adaptive NiCrAlY-Ag-Mo Coatings Prepared by Atmospheric Plasma Spraying. Surf. Coat. Technol.235, 521–528 (2013)10.1016/j.surfcoat.2013.08.012 ↗
15. N. Kang, P. Coddet, H. Liao, and C. Coddet, The Effect of Heat Treatment on Microstructure and Tensile Properties of Cold Spray Zr Base Metal Glass/Cu Composite. Surf. Coat. Technol.280, 64–71 (2015)10.1016/j.surfcoat.2015.08.061 ↗
16. L. Liu, H. Xu, J. Xiao, X. Wei, G. Zhang, and C. Zhang, Effect of Heat Treatment on Structure and Property Evolutions of Atmospheric Plasma Sprayed NiCrBSi Coatings. Surf. Coat. Technol.325, 548–554 (2017)10.1016/j.surfcoat.2017.07.011 ↗
17. P. Mayrhofer, D. Sonnleitner, M. Bartosik, and D. Holec, Structural and Mechanical Evolution of Reactively and Non-reactively Sputtered Zr-Al-N Thin Films During Annealing. Surf. Coat. Technol.244(100), 52–56 (2014)10.1016/j.surfcoat.2014.01.049 ↗
18. M. Vamsi, N. Wasekar, and G. Sundararajan, Influence of Heat Treatment on Microstructure and Mechanical Properties of Pulse Electrodeposited Ni-W Alloy Coatings. Surf. Coat. Technol.319, 403–414 (2017)10.1016/j.surfcoat.2017.03.074 ↗
19. L. Wang, and J. Shen, Effect of Heat Treatment on the Microstructure and Elevated Temperature Tensile Property of Fe-Doped NiAl-Cr(Mo)-(Hf, Dy) Eutectic Alloy. Mater. Sci. Eng. A654, 177–183 (2016)10.1016/j.msea.2015.12.043 ↗
20. Q. Wang, L. Li, G. Yang, X. Zhao, and Z. Ding, Influence of Heat Treatment on the Microstructure and Performance of High-velocity Oxy-fuel Sprayed WC-12Co Coatings. Surf. Coat. Technol.206, 4000–4010 (2012)10.1016/j.surfcoat.2012.03.080 ↗
21. F. Ghadami, M. Sohi, and S. Ghadami, Effect of Bond Coat and Post-heat Treatment on the Adhesion of Air Plasma Sprayed WC-Co Coatings. Surf. Coat. Technol.261, 289–294 (2015)10.1016/j.surfcoat.2014.11.016 ↗
22. B. Li, Y. Gao, J. Jia, M. Han, H. Guo, and W. Wang, Influence of Heat Treatments on the Microstructure as well as Mechanical and Tribological Properties of NiCrAlY-Mo-Ag Coatings. J. Alloy. Compd.686, 503–510 (2016)10.1016/j.jallcom.2016.06.075 ↗
23. H. Bakhsheshi-Rad, E. Hamzah, A. Ismail, M. Daroonparvar, M. Kasiri-Asgarani, S. Jabbarzare, and M. Medraj, Microstructural, Mechanical Properties and Corrosion Behavior of Plasma Sprayed NiCrAlY/Nano-YSZ Duplex Coating on Mg-1.2Ca-3Zn Alloy, CERAMICS International 41, 15272–15277 (2015)10.1016/j.ceramint.2015.08.025 ↗
24. M. Chen, S. Zhu, and F. Wang, High Temperature Oxidation of NiCrAlY, Nanocrystalline and Enamel-metal Nano-composite Coatings under Thermal Shock. Corros. Sci.100, 556–565 (2015)10.1016/j.corsci.2015.08.033 ↗
25. R. Eriksson, K. Yuan, X. Li, and R. Peng, Corrosion of NiCoCrAlY Coatings and TBC Systems Subjected to Water Vapor and Sodium Sulfate. J. Therm. Spray. Technol.24, 953–964 (2015)10.1007/s11666-015-0253-z ↗
26. W. Li, Q. Wang, Z. Bao, Y. Yao, J. Gong, C. Sun, and X. Jiang, Microstructural Evolution of the NiCrAlY/CrON Duplex Coating System and Its Influence on Mechanical Properties. Mater. Sci. Eng. A498, 487–494 (2008)10.1016/j.msea.2008.08.038 ↗
27. Y. Liu, X. Hu, S. Zheng, Y. Zhu, H. Wei, and X. Ma, Microstructural Evolution of the Interface Between NiCrAlY Coating and Superalloy During Isothermal Oxidation. Mater. Des.80, 63–69 (2015)10.1016/j.matdes.2015.05.014 ↗
28. X. Peng, S. Jiang, J. Gong, X. Sun, and C. Sun, Preparation and Hot Corrosion Behavior of a NiCrAlY + AlNiY Composite Coating. J. Mater. Sci. Technol.32, 587–592 (2016)10.1016/j.jmst.2016.04.017 ↗
29. X. Liu, X. Zhao, Y. An, G. Hou, S. Li, W. Deng, H. Zhou, and J. Chen, Effects of Loads on Corrosion-Wear Synergism of NiCoCrAlYTa Coating in Artificial Seawater. Tribol. Int.118, 421–431 (2018)10.1016/j.triboint.2017.10.019 ↗