Comparative Studies on Mechanical Properties and Microstructural Changes of AA5052 and AA6082 Dissimilar Weldments Developed by TIG, MIG, and FSW Techniques
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. S.K. Sharma, K.K. Saxena, V. Malik, K.A. Mohammed, C. Prakash, D. Buddhi et al., Significance of Alloying Elements on the Mechanical Characteristics of Mg-Based Materials for Biomedical Applications, Crystals, 2022, 12, p 1138. https://doi.org/10.3390/cryst1208113810.3390/cryst12081138 ↗
2. S.P. Ambade, C.K. Tembhurkar, A. Patil, A.V. Tidke, S.D. Shelare, C. Prakash et al., Microstructure, Mechanical Properties and Sensitization of Ultra-Low Nickel Cr-Mn Austenitic Stainless Steels, J. Mater. Res. Technol., 2024, 30, p 4353–4365. https://doi.org/10.1016/j.jmrt.2024.04.12710.1016/j.jmrt.2024.04.127 ↗
3. P. Kumar, S.R. Chauhan, C.I. Pruncu, M.K. Gupta, D.Y. Pimenov, M. Mia et al., Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation, Materials (Basel), 2019, 12, p 177. https://doi.org/10.3390/ma1201017710.3390/ma12010177 ↗
4. L. Shao, X. Zhang, Y. Chen, L. Zhu, S. Wu, Q. Liu et al., Why do Cracks Occur in the Weld Joint of Ti-22Al-25Nb Alloy During Post-Weld Heat Treatment?, Front. Mater., 2023, 10, p 1135407. https://doi.org/10.3389/fmats.2023.113540710.3389/fmats.2023.1135407 ↗
5. A.K. Yadav, M.K. Agrawal, K.K. Saxena, and B. Yelamasetti, Numerical Simulation and Experimental Residual Stress Analyses of Dissimilar GTA Weldments of AA 5083 and AA 6082, Int. J. Interact. Des. Manuf., 2023 https://doi.org/10.1007/s12008-023-01216-910.1007/s12008-023-01216-9 ↗
6. B. Yelamasetti, N. Santhi Sree, K.K. Saxena, N. Gupta, P. Naveen Kumar, and S.D. Shelare, Metallurgical, Mechanical and Corrosion Behavior of Interpulse and Pulsed Current TIG Dissimilar Welds of Monel 400 and AISI 316L, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 2023 https://doi.org/10.1177/0954408923121602910.1177/09544089231216029 ↗
7. M.I.A. Habba, N.A. Alsaleh, T.E. Badran, M.M. El-Sayed Seleman, S. Ataya, A.E. El-Nikhaily et al., Comparative Study of FSW, MIG, and TIG Welding of AA5083-H111 Based on the Evaluation of Welded Joints and Economic Aspect, Materials (Basel), 2023, 16, p 5124. https://doi.org/10.3390/ma1614512410.3390/ma16145124 ↗
8. J.S. Chohan, R. Kumar, T.H.B. Singh, S. Singh, S. Sharma, J. Singh et al., Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts, Materials (Basel), 2020, 13, p 5176. https://doi.org/10.3390/ma1322517610.3390/ma13225176 ↗
9. J. Xie, Y. Zhou, C. Zhou, X. Li, and Y. Chen, Microstructure and Mechanical Properties of Mg-Li Alloys Fabricated by Wire Arc Additive Manufacturing, J. Mater. Res. Technol., 2024, 29, p 3487–3493. https://doi.org/10.1016/j.jmrt.2024.02.09410.1016/j.jmrt.2024.02.094 ↗
10. N. Xue, W. Li, L. Shao, Z. Tu, Y. Chen, S. Dai et al., Comparison of Cold-Sprayed Coatings of Copper-Based Composite Deposited on AZ31B Magnesium Alloy and 6061 T6 Aluminum Alloy Substrates, Materials (Basel), 2023, 16, p 5120. https://doi.org/10.3390/ma1614512010.3390/ma16145120 ↗
11. Q. Zhu, J. Chen, G. Gou, H. Chen, and P. Li, Ameliorated Longitudinal Critically Refracted—Attenuation Velocity Method for Welding Residual Stress Measurement, J. Mater. Process. Technol., 2017, 246, p 267–275. https://doi.org/10.1016/j.jmatprotec.2017.03.02210.1016/j.jmatprotec.2017.03.022 ↗
12. S. Ambade, C. Tembhurkar, A. Rokde, S. Gupta, S. Shelare, C. Prakash et al., Experimental Investigation of Microstructural, Mechanical and Corrosion Properties of 316L and 202 Austenitic Stainless Steel Joints Using Cold Metal Transfer Welding, J. Mater. Res. Technol., 2023, 27, p 5881–5888. https://doi.org/10.1016/j.jmrt.2023.11.09110.1016/j.jmrt.2023.11.091 ↗
13. H. Singh, S. Singh, and C. Prakash, Current Trends in Biomaterials and Bio-manufacturing, Biomanufacturing. C. Prakash, S. Singh, R. Singh, S. Ramakrishna, B.S. Pabla, S. Puri, M.S. Uddin Ed., Springer International Publishing, Cham, 2019, p 1–34. https://doi.org/10.1007/978-3-030-13951-3_110.1007/978-3-030-13951-3_1 ↗
14. P. Kumar, A. Kumar Jain, J.P. Srivastava, R. Kumar, K.K. Saxena, C. Prakash et al., Multiphysics Simulation of the Shape Prediction and Material Removal Rate in Electrochemical Machining Process, Adv. Mater. Process. Technol., 2023, 10(2), p 772–784.
15. R. Kumar, J.S. Chohan, R. Goyal, and P. Chauhan, Impact of Process Parameters of Resistance Spot Welding on Mechanical Properties and Micro Hardness of Stainless Steel 304 Weldments, Int. J. Struct. Integr., 2021, 12, p 366–377. https://doi.org/10.1108/IJSI-03-2020-003110.1108/IJSI-03-2020-0031 ↗
16. R. Singh, R. Kumar, Pawanpreet, M. Singh, and J. Singh, On Mechanical, Thermal and Morphological Investigations of Almond Skin Powder-Reinforced Polylactic Acid Feedstock Filament, J. Thermoplast. Compos. Mater., 2022, 35(2), p 230–248. https://doi.org/10.1177/089270571988601010.1177/0892705719886010 ↗
17. S. Sharma, J. Singh, M.K. Gupta, M. Mia, S.P. Dwivedi, A. Saxena et al., Investigation on Mechanical, Tribological and Microstructural Properties of Al–Mg–Si–T6/SiC/Muscovite-Hybrid Metal-Matrix compoSites for High Strength Applications, J. Mater. Res. Technol., 2021, 12, p 1564–1581. https://doi.org/10.1016/j.jmrt.2021.03.09510.1016/j.jmrt.2021.03.095 ↗
18. S. Xu, X. Jing, P. Zhu, H. Jin, K.-W. Paik, P. He et al., Equilibrium Phase Diagram Design and Structural Optimization of SAC/Sn-Pb Composite Structure Solder Joint for Preferable Stress Distribution, Mater Charact, 2023, 206, 113389. https://doi.org/10.1016/j.matchar.2023.11338910.1016/j.matchar.2023.113389 ↗
19. L. Hua, Y. Liu, D. Qian, L. Xie, F. Wang, and M. Wu, Mechanism of Void Healing in Cold Rolled Aeroengine M50 Bearing Steel under Electroshocking Treatment: A Combined Experimental and Simulation Study, Mater Charact, 2022, 185, 111736. https://doi.org/10.1016/j.matchar.2022.11173610.1016/j.matchar.2022.111736 ↗
20. Y. Chen, S. Sun, T. Zhang, X. Zhou, and S. Li, Effects of Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of Laser-Welded NiTi/304SS Joint with Ni Filler, Mater. Sci. Eng. A, 2020, 771, 138545. https://doi.org/10.1016/j.msea.2019.13854510.1016/j.msea.2019.138545 ↗
21. M. Sabzi, S.H. Mousavi Anijdan, A.R. Eivani, N. Park, and H.R. Jafarian, The Effect of Pulse Current Changes in PCGTAW on Microstructural Evolution, Drastic Improvement in Mechanical Properties, and Fracture Mode of Dissimilar Welded Joint of AISI 316L-AISI 310S Stainless Steels, Mater. Sci. Eng. A, 2021, 823, 141700. https://doi.org/10.1016/j.msea.2021.14170010.1016/j.msea.2021.141700 ↗
22. M. Sabzi, S.H. Mousavi Anijdan, A.R.B. Chalandar, N. Park, H.R. Jafarian, and A.R. Eivani, An Experimental Investigation on the Effect of Gas Tungsten arc Welding Current Modes Upon the Microstructure, Mechanical, and Fractography Properties of Welded Joints of Two Grades of AISI 316L and AISI310S Alloy Metal Sheets, Mater. Sci. Eng. A, 2022, 840, 142877. https://doi.org/10.1016/j.msea.2022.14287710.1016/j.msea.2022.142877 ↗
23. M. Sabzi, S.M. Dezfuli, and S.M. Far, Deposition of Ni-Tungsten Carbide Nanocomposite Coating by TIG Welding: Characterization and Control of Microstructure and Wear/Corrosion Responses, Ceram. Int., 2018, 44, p 22816–22829. https://doi.org/10.1016/j.ceramint.2018.09.07310.1016/j.ceramint.2018.09.073 ↗
24. Z. Xiao, A. Pramanik, A.K. Basak, C. Prakash, and S. Shankar, Material Recovery and Recycling of Waste Tyres-A Review, Clean Mater., 2022, 5, 100115. https://doi.org/10.1016/j.clema.2022.10011510.1016/j.clema.2022.100115 ↗
25. M.K. Gupta, C.I. Pruncu, M. Mia, G. Singh, S. Singh, C. Prakash et al., Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions, Materials (Basel), 2018, 11, p 2088. https://doi.org/10.3390/ma1111208810.3390/ma11112088 ↗
26. K.S. Reddy, H. Vemanaboina, B.V.V. Naidu, B. Yelamasetti, P. Bridjesh, and S.D. Shelare, Minimizing Distortion in Multi-pass GTAW Welding of SS316L Structures: A Taguchi Approach, Int. J. Interact. Des. Manuf., 2023 https://doi.org/10.1007/s12008-023-01512-410.1007/s12008-023-01512-4 ↗
27. Z. Zhang, J. Chen, J. Wang, Y. Han, Z. Yu, Q. Wang et al., Effects of Solder Thickness on Interface Behavior and Nanoindentation Characteristics in Cu/Sn/Cu Microbumps, Weld. World, 2022, 66, p 973–983. https://doi.org/10.1007/s40194-022-01261-010.1007/s40194-022-01261-0 ↗
28. X. Long, T. Su, C. Lu, S. Wang, J. Huang, and C. Chang, An Insight into Dynamic Properties of SAC305 Lead-Free Solder under High Strain Rates and High Temperatures, Int. J. Impact Eng, 2023, 175, 104542. https://doi.org/10.1016/j.ijimpeng.2023.10454210.1016/j.ijimpeng.2023.104542 ↗
29. Z. Gong, T. Zhang, Y. Chen, J. Lu, X. Ding, S. Zhang et al., Effect of Laser Shock Peening on Stress Corrosion Cracking of TC4/2A14 Dissimilar Metal Friction Stir Welding Joints, J. Mater. Res. Technol., 2024, 30, p 1716–1725. https://doi.org/10.1016/j.jmrt.2024.03.21610.1016/j.jmrt.2024.03.216 ↗
30. S. Wang, X. Chen, K. Luo, H. Zhou, R. Li, P. He et al., The Design of Low-Temperature Solder Alloys and the Comparison of Mechanical Performance of Solder Joints on ENIG and ENEPIG Interface, J. Mater. Res. Technol., 2023, 27, p 5332–5339. https://doi.org/10.1016/j.jmrt.2023.11.06610.1016/j.jmrt.2023.11.066 ↗
31. S. Ambade, F. Khan, A. Dahikar, Y. Bhonde, S. Shelare, C. Tembhurkar et al., Dissimilar Welding of Austenitic SS and Ferritic SS in Last Decades, Mater. Today Proc., 2023 https://doi.org/10.1016/j.matpr.2023.04.53310.1016/j.matpr.2023.04.533 ↗
32. X. Long, C. Lu, Y. Su, and Y. Dai, Machine Learning Framework for Predicting the Low Cycle Fatigue Life of Lead-Free Solders, Eng. Fail. Anal., 2023, 148, 107228. https://doi.org/10.1016/j.engfailanal.2023.10722810.1016/j.engfailanal.2023.107228 ↗
33. T. Zhao, Z. Yan, B. Zhang, P. Zhang, R. Pan, T. Yuan et al., A Comprehensive Review of Process Planning and Trajectory Optimization in Arc-Based Directed Energy Deposition, J. Manuf. Process., 2024, 119, p 235–254. https://doi.org/10.1016/j.jmapro.2024.03.09310.1016/j.jmapro.2024.03.093 ↗
34. S. Zhang, S. Zhang, H. Zhou, K.-W. Paik, T. Ding, W. Long et al., Preparation and Characterization of Sn-3.0Ag-0.5Cu Nano-Solder Paste and Assessment of the Reliability of Joints Fabricated by Microwave Hybrid Heating, Mater Charact, 2024, 207, p 113512. https://doi.org/10.1016/j.matchar.2023.11351210.1016/j.matchar.2023.113512 ↗
35. M.M.Z. Ahmed, M.M. El-Sayed Seleman, I. Albaijan, and A. El-Aty Abd, Microstructure, Texture, and Mechanical Properties of Friction Stir Spot-Welded AA5052-H32: Influence of Tool Rotation Rate, Materials (Basel), 2023, 16, p 3423. https://doi.org/10.3390/ma1609342310.3390/ma16093423 ↗
36. S. Mabuwa, V. Msomi, H. Mehdi, and T. Ngonda, A study on the Metallurgical Characterisation of the Longitudinally Sampled Friction Stir Processed TIG Welded Dissimilar Aluminum Joints, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 2023 https://doi.org/10.1177/0954408923116958910.1177/09544089231169589 ↗
37. M.S. Bin Reyaz and A.N. Sinha, Analysis of Mechanical Properties and Optimization of Tungsten Inert Gas welding Parameters on Dissimilar AA6061-T6 and AA7075-T6 by a Response Surface Methodology-Based Desirability Function Approach, Eng. Optim., 2023 https://doi.org/10.1080/0305215X.2023.223013310.1080/0305215X.2023.2230133 ↗
38. H.-C. Chen, A. Wisnujati, Mudjijana, A.M. Widodo, and C.-W. Lung, Grey Relational Analysis and Grey Prediction Model (1, 6) Approach for Analyzing the Electrode Distance and Mechanical Properties of Tandem MIG Welding Distortion, Materials (Basel), 2023, 16(4), p 1390. https://doi.org/10.3390/ma1604139010.3390/ma16041390 ↗
39. M. Sabzi and S.M. Dezfuli, Drastic Improvement in Mechanical Properties and Weldability of 316L Stainless Steel Weld Joints by Using Electromagnetic Vibration During GTAW Process, J. Manuf. Process., 2018, 33, p 74–85. https://doi.org/10.1016/j.jmapro.2018.05.00210.1016/j.jmapro.2018.05.002 ↗
40. T. Reza Tabrizi, M. Sabzi, S.H. Mousavi Anijdan, A.R. Eivani, N. Park, and H.R. Jafarian, Comparing the Effect of Continuous and Pulsed Current in the GTAW Process of AISI 316L Stainless Steel Welded Joint: Microstructural Evolution, Phase Equilibrium, Mechanical Properties and Fracture Mode, J. Mater. Res. Technol., 2021, 15, p 199–212. https://doi.org/10.1016/j.jmrt.2021.07.15410.1016/j.jmrt.2021.07.154 ↗
41. M. Li, Q. Guo, L. Chen, L. Li, H. Hou, and Y. Zhao, Microstructure and Properties of Graphene Nanoplatelets Reinforced AZ91D Matrix Composites Prepared by Electromagnetic Stirring Casting, J. Mater. Res. Technol., 2022, 21, p 4138–4150. https://doi.org/10.1016/j.jmrt.2022.11.03310.1016/j.jmrt.2022.11.033 ↗
42. L. Nafeez Ahmed, D. Veeman, and S.M. Muthu, Effect of Addition of Scandium in Filler Rod on Tungsten Inert Gas Welding of AA5052-H32 Alloy, Russ. J. Non-Ferrous Met., 2022, 63, p 315–327. https://doi.org/10.3103/S106782122203009910.3103/S1067821222030099 ↗
43. B. Yelamasetti, G. VenkatRamana, S. Manikyam, and K.K. Saxena, Multi-Response Taguchi Grey Relational Analysis of Mechanical Properties and Weld Bead dimensions of Dissimilar Joint of AA6082 and AA7075, Adv. Mater. Process. Technol., 2022, 8(sup3), p 1474–1484. https://doi.org/10.1080/2374068X.2021.194634010.1080/2374068X.2021.1946340 ↗
44. M.V.A. Ramakrishna and K. Srinivas, Grey Relational Analysis of Friction Stir Welding Parameters for the Development of Dissimilar Joints Between AA6082 and AA7075, Adv. Mater. Process. Technol., 2022, 8(sup2), p 954–965. https://doi.org/10.1080/2374068X.2021.195911210.1080/2374068X.2021.1959112 ↗
45. S. Mabuwa, V. Msomi, H. Mehdi, and K.K. Saxena, Effect of Material Positioning on Si-rich TIG Welded Joints of AA6082 and AA8011 by Friction Stir Processing, J. Adhes. Sci. Technol., 2023, 37, p 2484–2502. https://doi.org/10.1080/01694243.2022.214236610.1080/01694243.2022.2142366 ↗
46. A.M.N. Arifuddin, T. Hidayat, M. Uswah Pawara, and M. Zulkifli, Experimental Study of Aluminium Joint Plate Between AA5052 with AA5083: Application on Hull Vessel Material, Int. J. Mar. Eng. Innov. Res., 2022 https://doi.org/10.12962/j25481479.v7i2.1289610.12962/j25481479.v7i2.12896 ↗
47. P.K. Arya, N.K. Jain, and M. Jayaprakash, Optimization of Process Parameters for Friction Stir Welding of Aluminium Alloy AA5052-H32 by Using Taguchi Method, Advancement in Materials Processing Technology: Select Proceedings of AMPT 2020. R. Prasad, R. Sahu, K.L. Sahoo, G.N. Jadhav Ed., Springer Singapore, Singapore, 2022, p 71–81. https://doi.org/10.1007/978-981-16-3297-6_710.1007/978-981-16-3297-6_7 ↗
48. C. Tan, B. Xu, F. Liu, Y. Zhao, D. Lin, L. Wu et al., Effect of Ultrasonic Vibration on Porosity Suppression and Columnar-To-Equiaxed Transition in laser-MIG Hybrid Welding of Aluminum Alloy, Int. J. Adv. Manuf. Technol., 2022, 122, p 2463–2474. https://doi.org/10.1007/s00170-022-10034-410.1007/s00170-022-10034-4 ↗
49. T. Xin, S. Tang, F. Ji, L. Cui, B. He, X. Lin et al., Phase Transformations in an Ultralight BCC Mg Alloy During Anisothermal Ageing, Acta Mater., 2022, 239, 118248. https://doi.org/10.1016/j.actamat.2022.11824810.1016/j.actamat.2022.118248 ↗
50. Y. Zhang, Z. Huang, H. Wang, and J. Li, Regulation of the Interface Compatibility of the 3D-Printing Interpenetration Networks Toward Reduced Structure Anisotropy and Enhanced Performances, ACS Appl. Mater. Interfaces, 2023, 15, p 32984–32992. https://doi.org/10.1021/acsami.3c0651410.1021/acsami.3c06514 ↗
51. C. Prakash, S. Singh, M. Singh, M.K. Gupta, M. Mia, and A. Dhanda, Multi-Objective Parametric Appraisal of Pulsed Current Gas Tungsten arc Welding Process by Using Hybrid Optimization Algorithms, Int. J. Adv. Manuf. Technol., 2019, 101, p 1107–1123. https://doi.org/10.1007/s00170-018-3017-310.1007/s00170-018-3017-3 ↗
52. J.X. Fang, J.X. Wang, Y.J. Wang, H.T. He, D.B. Zhang, and Y. Cao, Microstructure Evolution and Deformation Behavior During Stretching of a Compositionally Inhomogeneous TWIP-TRIP Cantor-Like Alloy by Laser Powder Deposition, Mater. Sci. Eng. A, 2022, 847, 143319. https://doi.org/10.1016/j.msea.2022.14331910.1016/j.msea.2022.143319 ↗
53. L. Chen, Y. Zhao, J. Jing, and H. Hou, Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process, J. Alloys Compd., 2023, 940, 168824. https://doi.org/10.1016/j.jallcom.2023.16882410.1016/j.jallcom.2023.168824 ↗
54. F. Song, Y. Liu, D. Shen, L. Li, and J. Tan, Learning Control for Motion Coordination in Wafer Scanners: Toward Gain Adaptation, IEEE Trans. Ind. Electron., 2022, 69, p 13428–13438. https://doi.org/10.1109/TIE.2022.314242810.1109/TIE.2022.3142428 ↗
55. A. Sasikumar, S. Gopi, and D.G. Mohan, Prediction of Filler Added Friction Stir Welding Parameters for Improving Corrosion Resistance of Dissimilar Aluminium Alloys 5052 and 6082 Joints, Adv. Mater. Sci., 2022, 22, p 79–95. https://doi.org/10.2478/adms-2022-001410.2478/adms-2022-0014 ↗
56. A. Singh and V. Upadhyay, Influence of Base Metal Temper Conditions on AA6082 and AA7050 Dissimilar Friction Stir Weld Properties, Proc. Inst. Mech. Eng. Part E J. Process. Mech. Eng., 2023 https://doi.org/10.1177/0954408923117504210.1177/09544089231175042 ↗
57. M. Murugesan, M. Sajjad, and D.W. Jung, Experimental and Numerical Investigation of AA5052-H32 Al Alloy with U-Profile in Cold Roll Forming, Materials (Basel), 2021, 14, p 470. https://doi.org/10.3390/ma1402047010.3390/ma14020470 ↗
58. Z. Yan, A. Xiao, P. Zhao, X. Cui, H. Yu, and Y. Lin, Deformation Behavior of 5052 Aluminum Alloy Sheets During Electromagnetic Hydraulic Forming, Int. J. Mach. Tools Manuf, 2022, 179, 103916. https://doi.org/10.1016/j.ijmachtools.2022.10391610.1016/j.ijmachtools.2022.103916 ↗
59. I. Dinaharan, R. Palanivel, N. Murugan, and R.F. Laubscher, Predicting the Wear Rate of AA6082 Aluminum Surface Composites Produced by Friction Stir Processing Via Artificial Neural Network, Multidiscip. Model. Mater. Struct., 2020, 16, p 409–423. https://doi.org/10.1108/MMMS-05-2019-010210.1108/MMMS-05-2019-0102 ↗
60. H. Monajati, M. Zoghlami, A. Tongne, and M. Jahazi, Assessing Microstructure-Local Mechanical Properties in Friction Stir Welded 6082–T6 Aluminum Alloy, Metals (Basel), 2020, 10, p 1244. https://doi.org/10.3390/met1009124410.3390/met10091244 ↗
61. G. Yu, S. Chen, Z. Zhao, Z. Wen, J. Huang, J. Yang et al., Comparative Study of Laser Swelding-Brazing of Aluminum Alloy to Galvanized Steel Butted Joints Using Five Different Filler Wires, Opt. Laser Technol., 2022, 147, 107618. https://doi.org/10.1016/j.optlastec.2021.10761810.1016/j.optlastec.2021.107618 ↗
62. N. Nazemi and F. Ghrib, Strength Characteristics of Heat-Affected Zones in Welded Aluminum Connections, J. Eng. Mech., 2019, 145, p 04019103. https://doi.org/10.1061/(ASCE)EM.1943-7889.000164710.1061/(ASCE)EM.1943-7889.0001647 ↗
63. T. Sonar, V. Balasubramanian, S. Malarvizhi, T. Venkateswaran, and D. Sivakumar, Effect of Heat Input on Evolution of Microstructure and Tensile Properties of Gas Tungsten Constricted Arc (GTCA) Welded Inconel 718 Alloy Sheets, Metallogr. Microstruct. Anal., 2020, 9, p 369–392. https://doi.org/10.1007/s13632-020-00654-110.1007/s13632-020-00654-1 ↗
64. K. Devendranath Ramkumar, S.D. Patel, S. Sri Praveen, D.J. Choudhury, P. Prabaharan, N. Arivazhagan et al., Influence of Filler Metals and Welding Techniques on the Structure–Property Relationships of Inconel 718 and AISI 316L Dissimilar Weldments, Mater. Des., 2014, 62, p 175–188. https://doi.org/10.1016/j.matdes.2014.05.01910.1016/j.matdes.2014.05.019 ↗
65. M.S. Khan, S. Ali, D. Westerbaan, W. Duley, E. Biro, and Y.N. Zhou, The Effect of Laser Impingement Angle on the Optimization of Melt Pool Geometry to Improve Process Stability during High-Speed Laser Welding of Thin-Gauge Automotive Steels, J. Manuf. Process., 2022, 78, p 242–253. https://doi.org/10.1016/j.jmapro.2022.04.02210.1016/j.jmapro.2022.04.022 ↗
66. J. Li, F. Cao, and Y. Shen, Effect of Welding Parameters on Friction Stir Welded Ti–6Al–4V Joints: Temperature, Microstructure and Mechanical Properties, Metals (Basel), 2020, 10, p 940. https://doi.org/10.3390/met1007094010.3390/met10070940 ↗
67. R. Moshwan, F. Yusof, M.A. Hassan, and S.M. Rahmat, Effect of Tool Rotational Speed on Force Generation, Microstructure and Mechanical Properties of Friction Stir Welded Al–Mg–Cr–Mn (AA 5052-O) Alloy, Mater. Des., 2015, 66, p 118–128. https://doi.org/10.1016/j.matdes.2014.10.04310.1016/j.matdes.2014.10.043 ↗
68. M.M.Z. Ahmed, S. Ataya, M.M. El-Sayed Seleman, A.M.A. Mahdy, N.A. Alsaleh, and E. Ahmed, Heat Input and Mechanical Properties Investigation of Friction Stir Welded AA5083/AA5754 and AA5083/AA7020, Metals (Basel), 2021, 11, p 68. https://doi.org/10.3390/met1101006810.3390/met11010068 ↗
69. R. Rajeshkumar, V.L. Niranjani, K. Devakumaran, and K. Banerjee, Structure-Property Correlation of Weld Metal Zone and Interface Regions of Cold Metal Transfer Welded Dissimilar Al-Mg-Mn Alloys Joint, Mater. Today Proc., 2021, 46, p 2498–2509. https://doi.org/10.1016/j.matpr.2021.01.50710.1016/j.matpr.2021.01.507 ↗
70. M. Sabzi and S.M. Dezfuli, Post Weld Heat Treatment of Hypereutectoid Hadfield Steel: Characterization and Control of Microstructure, Phase Equilibrium, Mechanical Properties and Fracture Mode of Welding Joint, J. Manuf. Process., 2018, 34, p 313–328. https://doi.org/10.1016/j.jmapro.2018.06.00910.1016/j.jmapro.2018.06.009 ↗
71. H.R. Jafarian, M. Sabzi, S.H. Mousavi Anijdan, A.R. Eivani, and N. Park, The Influence of Austenitization Temperature on Microstructural Developments, Mechanical Properties, Fracture Mode and Wear Mechanism of Hadfield High Manganese Steel, J. Mater. Res. Technol., 2021, 10, p 819–831. https://doi.org/10.1016/j.jmrt.2020.12.00310.1016/j.jmrt.2020.12.003 ↗
72. S.H. Mousavi Anijdan, and M. Sabzi, The Effect of Heat Treatment Process Parameters on Mechanical Properties, Precipitation, Fatigue Life, and Fracture Mode of an Austenitic Mn Hadfield Steel, J. Mater. Eng. Perform., 2018, 27, p 5246–5253. https://doi.org/10.1007/s11665-018-3625-y10.1007/s11665-018-3625-y ↗
73. E. Çetkin, Y.H. Çelik, and Ş Temiz, Effect of Welding Parameters on Microstructure and Mechanical Properties of AA7075/AA5182 Alloys Joined by TIG and MIG Welding Methods, J. Braz. Soc. Mech. Sci. Eng., 2019, 42, p 34. https://doi.org/10.1007/s40430-019-2119-710.1007/s40430-019-2119-7 ↗