Dynamic Recovery and Recrystallization Behaviors of C71500 Copper-Nickel Alloy Under Hot Deformation
Source abstract
Abstract
The isothermal compression test was employed to study the influence of deformation temperature and strain rate on the hot deformation behavior of C71500 copper-nickel alloy. According to the characteristics of dynamic recovery (DRV) and dynamic recrystallization (DRX), the Zener–Hollomon parameter lnZ is used as an important parameter to measure the influence of temperature and strain rate on the hot deformation behavior. The critical deformation conditions of DRX are determined by its different values. By analyzing the critical change of work hardening rate, the relationship among critical stress, peak stress and saturation stress transition point is obtained, and the dynamic mathematical model of the whole deformation process is established, which can predict the volume fraction of DRV and DRX well. The DRX nucleation and growth mechanism of C71500 copper-nickel alloy was determined by metallographic analysis. In the current work, the thermodynamic parameters are introduced to determine the critical conditions of the transformation of the deformation state, the transformation process of the hot deformation structure is predicted by the dynamic model, the nucleation and growth mechanism is analyzed, which could provide a complete set of important references for the DRV-based hot deformation alloy, and provide a theoretical basis for the control of the structure state after hot processing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. S. Cincera and E. Bresciani, De-nickelification of 70/30 Cupronickel Tubing in a Cooling Heat Exchanger, J. Fail. Anal. Prev., 2012, 12(3), p 300–30410.1007/s11668-012-9565-1 ↗
2. A.M. Beccaria and J. Crousier, Influence of Iron Addition on Corrosion Layer Built Up on 70Cu-30Ni Alloy in Sea Water, Br. Corros. J., 2013, 26(3), p 215–21910.1179/000705991798269189 ↗
3. X. Zhu and T. Lei, Characteristics and Formation of Corrosion Product Films of 70Cu-30Ni Alloy in Seawater, Corros. Sci., 2002, 44(1), p 67–7910.1016/S0010-938X(01)00041-5 ↗
4. T.J. Glover, Copper-Nickel Alloy for the Construction of Ship and Boat Hulls, Br. Corros. J., 1982, 17(4), p 155–15810.1179/000705982798274228 ↗
5. E. Chassaing, K.V. Quang, and R. Wiart, Mechanism of copper-nickel alloy electrodeposition, J. Appl. Electrochem., 1987, 17(6), p 1267–128010.1007/BF01023611 ↗
6. I. Alstrup, U.E. Petersen, and J.R. Rostrup-Nielsen, Propane Hydrogenolysis on Sulfur- and Copper-Modified Nickel Catalysts, J. Catal., 2000, 191(2), p 401–40810.1006/jcat.1999.2812 ↗
7. A. Al-Hashem and J. Carew, The use of Electrochemical Impedance Spectroscopy to Study the Effect of Chlorine and Ammonia Residuals on the Corrosion of Copper-Based and Nickel-Based Alloys in Seawater, Desalination, 2002, 150(3), p 255–26210.1016/S0011-9164(02)00981-5 ↗
8. D. James, V.D. Huw, S. David, N. Lembit, and R.G. Compton, Cathodic Stripping Voltammetry of Nickel: Sonoelectrochemical Exploitation of the Ni(III)/Ni(II) Couple, Talanta, 2002, 57(6), p 1045–105110.1016/S0039-9140(02)00148-0 ↗
9. R. Solmaz, A. Döner, and G. Kardaş, The Stability of Hydrogen Evolution Activity and Corrosion Behavior of NiCu Coatings With Long-Term Electrolysis in Alkaline Solution, Int. J. Hydrogen Energy, 2009, 34(5), p 2089–209410.1016/j.ijhydene.2009.01.007 ↗
10. A. Sin, E. Kopnin, Y. Dubitsky, A. Zaopo, A.S. Aricò, D.L. Rosa, L.R. Gullo, and V. Antonucci, Performance and Life-Time Behaviour of NiCu-CGO Anodes for the Direct Electro-Oxidation of Methane in IT-SOFCs, J. Power Sources, 2007, 164(1), p 300–30510.1016/j.jpowsour.2006.10.078 ↗
11. L. Li, G. Wang, J. Liu, and Z.-Q. Yao, Flow Softening Behavior and Microstructure Evolution of Al-5Zn-2Mg Aluminum Alloy During Dynamic Recovery, Trans. Nonferrous Metal. Soc. China, 2014, 24, p 42–4810.1016/S1003-6326(14)63026-0 ↗
12. Z. Cai, F. Chen, F. Ma, and J. Guo, Dynamic Recrystallization Behavior and Hot Workability of AZ41M Magnesium Alloy During Hot Deformation, J. Alloy. Compd., 2016, 670(3), p 55–63
13. F. Cao, X. Fei, and G. Xue, Hot Tensile Deformation Behavior and Microstructural Evolution of a Mg-9.3Li-1.79Al–1.61Zn alloy, Mater. Des., 2016, 92, p 44–5710.1016/j.matdes.2015.12.008 ↗
14. Y.Q. Ning, X. Luo, H.Q. Liang, H.Z. Guo, J.L. Zhang, and K. Tan, Competition Between Dynamic Recovery and Recrystallization During Hot Deformation for TC18 Titanium Alloy, Mater. Sci. Eng., A, 2015, 635, p 77–8510.1016/j.msea.2015.03.071 ↗
15. T. Wang, B. Li, Z. Wang, Y. Li, and Z. Nie, Influence Mechanism of The Initial Dislocation Boundary on the Adiabatic Shear Sensitivity of Commercial Pure Titanium, Mater. Sci. Eng., A, 2016, 676, p 1–910.1016/j.msea.2016.08.089 ↗
16. G. Testa, N. Bonora, A. Ruggiero, G. Iannitti, I. Persechino, M. Hörnqvist, N. Mortazavi, Modelling and simulation of dynamic recrystallization (DRX) in OFHC copper at very high strain rates, Biennial Aps Conference on Shock Compression of Condensed Matter, 1793 (2015)
17. G. Gottstein, D. Zabardjadi, and H. Mecking, Dynamic Recrystallization in Tension-Deformed Copper Single Crystals, Metal Sci. J., 2013, 13(3–4), p 223–227
18. H.J. Mcqueen and S. Bergerson, Dynamic Recrystallization of Copper During Hot Torsion, Metal Sci. J., 2013, 6(1), p 25–2910.1179/030634572790445894 ↗
19. S.H. Huang, D.Y. Shu, H.U. Chuan-Kai, and S.F. Zhu, Effect of Strain Rate and Deformation Temperature on Strain Hardening and Softening Behavior Of Pure Copper, Trans. Nonferrous Met. Soc. China, 2016, 26(4), p 1044–105410.1016/S1003-6326(16)64201-2 ↗
20. L. Ning, C. Zhibao, and L. Chen, Dynamic Recrystallization and Microstructure Evolution of BFe10-1-1 Copper Alloy, Hot Work. Technol., 2017, 46(04), p 72–74
21. Y. Huang, M. Li, Z. Xiao, H. Liu, S. Wang, A Dynamic Recrystallization (DRX) Constitutive Model for Elevated Temperature Flow Behavior of Cu-0.5Cr-0.1Zr Alloy, Metallogr. Microstruct. Anal. pp 1-13 (2016)
22. Y.-K. Liu, H.-Y. Huang, and J.-X. Xie, Effect of Compression Direction on the Dynamic Recrystallization Behavior of Continuous Columnar-Grained CuNi10Fe1Mn Alloy, Int. J. Miner. Metallur. Mater., 2015, 22(8), p 851–85910.1007/s12613-015-1142-7 ↗
23. J. Cai, X. Zhang, K. Wang, and C. Miao, Physics-Based Constitutive Model to Predict Dynamic Recovery Behavior of BFe10-1-2 Cupronickel Alloy during Hot Working, High Temp. Mater. Processes (London), 2016, 35, p 1–910.1515/htmp-2014-0155 ↗
24. M. Shaban, B. Eghbali, G. Reza Ebrahimi, Evaluation of the Kinetics of Dynamic Recovery in AISI 321 Austenitic Stainless Steel Using Hot Flow Curves, Trans. Indian Inst. Metal, pp 1-7 (2016)
25. J.J. Jonas, C.M. Sellars, and W.J.M. Tegart, Strength and Structure Under Hot-Working Conditions, Metall Rev, 1969, 14(1), p 1–2410.1179/095066069790138056 ↗
26. G. Maizza, R. Pero, M. Richetta, and R. Montanari, Continuous Dynamic Recrystallization (CDRX) Model for Aluminum Alloys, J. Mater. Sci., 2018, 53(12), p 1–11
27. X.H. Zhao, D.D. Liu, W.U. Xiang-Hong, G.R. Liu, and C. Liang, Flow Behavior and Constitutive Description of Cu-Zr-Ce Alloy at High Temperature, J. Central South Univ., 2018, 25(5), p 1013–102410.1007/s11771-018-3801-0 ↗
28. H. Yin, K. Kwak, D. Kishi, Y. Mine, R. Ding, P. Bowen, K. Takashima, Anisotropy of slip behaviour in single-colony lamellar structures of Ti-6Al-4V. Mater. Sci. Eng. A, 715, (2018)10.1016/j.msea.2018.01.013 ↗
29. H. Huang, X. Li, Z. Dong, W. Li, S. Huang, D. Meng, X. Lai, T. Liu, S. Zhu, and L. Vitos, Critical Stress for Twinning Nucleation in CrCoNi-Based Medium and High Entropy Alloys, Acta Mater., 2018, 149, p S135964541830145910.1016/j.actamat.2018.02.037 ↗
30. S.X. Zhu, Y. Liu, Y. Li, B.H. Tian, Y. Zhang, K.X. Song, S.X. Zhu, Y. Liu, Y. Li, and B.H. Tian, Critical Conditions of Dynamic Recrystallization of the Cu-0.4Zr-0.15Y Alloy, Trans. Mater. Heat Treatment, 2017, 38(5), p 172–178
31. Y. Estrin and H. Mecking, A Unified Phenomenological Description of Work Hardening and Creep Based on One-Parameter Models, Acta Metall., 1984, 32(1), p 57–7010.1016/0001-6160(84)90202-5 ↗
32. Y. Bergström and H. Hallén, An Improved Dislocation Model for the Stress-Strain Behaviour of Polycrystalline α-Fe, Mater. Ence. Eng., 1982, 55(1), p 49–61
33. S.S. Satheesh-Kumar, T. Raghu, P.P. Bhattacharjee, G. Appa-Rao, and U. Borah, Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy, J. Mater. Sci., 2015, 50(19), p 6444–645610.1007/s10853-015-9200-0 ↗
34. X. Gao, H.-b. Wu, M. Liu, Y.-x. Zhang, Effect of annealing time on grain boundary characteristics of C71500 cupronickel alloy tubes with different deformation, Mater. Character, 110603 (2020)10.1016/j.matchar.2020.110603 ↗
35. J. McCarley and S. Tin, Utilization of hot deformation to trigger Strain Induced Boundary Migration (SIBM) in Ni-base Superalloys, Mater. Sci. Eng., A, 2018, 720, p S092150931830270310.1016/j.msea.2018.02.062 ↗
36. B.J. Lv, J. Peng, and Z. Chu, The Effect of Icosahedral Phase on Dynamic Recrystallization Evolution and Hot Workability of Mg-2.0Zn-0.3Zr-0.2Y Alloy, J. Mater. Eng. Perform., 2015, 24(9), p 3502–351210.1007/s11665-015-1604-0 ↗
37. H.N. Qi, Z.M. Zhang, J.M. Yu, X.Y. Yin, and Z.Y. Du, Dynamic Recrystallization of Mg-8Gd-3Y-1Nd-0.5Zr Alloy During Hot Deformation, Mater. Sci. Forum, 2017, 898, p 311–32210.4028/www.scientific.net/MSF.898.311 ↗