Prediction of Aging Kinetics and Yield Strength of 6063 Alloy
Source abstract
Abstract
Bulk hardness and tensile properties of an AA6063 Al-Mg-Si alloy specimens subjected to artificial age-hardening treatment over a wide range of temperatures (373-523 K) and time durations (5 min to 60 days) have been determined and analyzed to predict complete aging kinetics and yield strength. The predictions have been made using simplified hardness-based models. The experimental results are used to generate kinetic models for under- and overaging regimes following the Johnson–Mehl–Avarami and the Lifshitz–Slyozov–Wagner equations, respectively. The obtained kinetic parameters are found to satisfactorily describe the overall aging kinetics of the Al-Mg-Si alloy. Additionally, relationship between the estimated hardness and the yield strength values of the AA6063 alloy has been established and its utility has been validated. The developed hardness-based models can be used as convenient tool to determine the state of aging and to predict the yield strength of Al-Mg-Si alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (97)
Show source-provided references
1. I.J. Polmear, D. StJohn, J. Nie, and M. Qian, Light Alloys: Metallurgy of the Light Metals, 5th ed., Elsevier, Oxford, 2017, p 234
2. R.A. Siddiqui, H.A. Abdullah, and K.R. Al-Belushi, Influence of Ageing Parameters on the Mechanical Properties of 6063 Aluminium Alloy, J. Mater. Process. Technol., 2000, 102, p 234–24010.1016/S0924-0136(99)00476-8 ↗
3. N.C. Parson and H.L. Yiu, Light Metals, P.G. Campbell, Ed., TMS, Warrendale, 1989, p 713
4. W.H. Cubberly, H. Barker, and D. Benjamin, ASM Handbook, 9th ed., ASM International, Novelty, 1979
5. S.K. Panigrahi and R. Jayaganthan, Development of Ultrafine-Grained Al 6063 Alloy by Cryorolling with the Optimized Initial Heat Treatment Condition, Mater. Des., 2011, 32, p 2172–218010.1016/j.matdes.2010.11.027 ↗
6. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper, The Precipitation Sequence in Al-Mg-Si Alloys, Acta Mater., 1998, 46, p 3893–390410.1016/S1359-6454(98)00059-7 ↗
7. Q. Du, W.J. Poole, and A.A. Wells, A Mathematical Model Coupled to CALPHAD to Predict Precipitation Kinetics for Multicomponent Aluminum Alloys, Acta Mater., 2012, 60, p 3830–383910.1016/j.actamat.2012.02.050 ↗
8. M. Perez, M. Dumont, and D. Acevedo-Reyes, Implementation of Classical Nucleation and Growth Theories for Precipitation, Acta Mater., 2008, 56, p 2119–213210.1016/j.actamat.2007.12.050 ↗
9. D. Bardel, M. Perez, D. Nelias, A. Deschamps, C.R. Hutchinson, D. Maisonnette, T. Chaise, J. Garnier, and F. Bourlier, Coupled Precipitation and Yield Strength Modeling for Non-isothermal Treatments of a 6061 Aluminium Alloy, Acta Mater., 2014, 62, p 129–14010.1016/j.actamat.2013.09.041 ↗
10. O.R. Myhr, O.S. Hopperstad, and T. Børvik, A Combined Precipitation, Yield Stress and Work Hardening Model for Al-Mg-Si Alloys Incorporating the Effects of Strain Rate and Temperature, Metall. Trans. A, 2018, 49A, p 3592–360910.1007/s11661-018-4675-3 ↗
11. W. Sha, Application of Simple Practical Models for Early Stage Precipitation Kinetics and Hardening in Aluminium Alloys, Mater. Des., 2007, 28, p 528–53310.1016/j.matdes.2005.08.012 ↗
12. E.A. Wilson, Quantifictaion of Age Hardening in an Fe-12Ni-6Mn Alloy, Scr. Mater., 1997, 36, p 1179–118510.1016/S1359-6462(97)00006-7 ↗
13. I.M. Lifshitz and V.V. Slyozov, The Kinetics of Precipitation from Supersaturated Solid Solutions, J. Phys. Chem. Solids, 1961, 19, p 35–5010.1016/0022-3697(61)90054-3 ↗
14. W. Sha, Quantification of Age Hardening in Maraging Steels and an Ni-Base Super Alloy, Scr. Mater., 2000, 42, p 549–55310.1016/S1359-6462(99)00394-2 ↗
15. A.R. Eivani and A.K. Taheri, Modeling Ageing Kinetics of an Al-Mg-Si-Cu Aluminum Alloy, J. Mater. Process. Technol., 2008, 205, p 388–39310.1016/j.jmatprotec.2007.11.195 ↗
16. M. Ferrante and R.D. Doherty, On the Precipitate Growth Kinetics in Aluminium-Silver Alloys, Scr. Mater., 1976, 10, p 1059–1064
17. C. Wagner, Theorie der alterung von niederschlägen durch umlösen (Ostwald-Reifung) Zeitschrift für Elektrochemie, Ber. Bunsenges. Phys. Chem., 1961, 65, p 581–591 (in German)
18. Z. Guo and W. Sha, Quantification of Precipitation Kinetics and Age Hardening of Fe-12Ni-6Mn Alloy During Overaging, Mater. Sci. Technol., 2002, 18, p 529–53310.1179/026708302225002155 ↗
19. K.G. Wang, Z. Guo, W. Sha, M.E. Glicksman, and K. Rajan, Property Predictions Using Microstructural Modeling, Acta Mater., 2005, 53, p 3395–340210.1016/j.actamat.2005.03.041 ↗
20. R. Hill, E.H. Lee, and S.J. Tupper, The Theory of Wedge Indentation of Ductile Materials, Proc. R. Soc. Lond. Ser. A, 1947, 188, p 273–28910.1098/rspa.1947.0009 ↗
21. D. Tabor, A Simple Theory of Static and Dynamic Hardness, Proc. R. Soc. Lond. Ser. A, 1948, 192, p 247–27410.1098/rspa.1948.0008 ↗
22. D. Tabor, The Hardness of Metals, Oxford, London, 1951, p 100–126
23. M. Tiryakioğlu and J. Campbell, On Macrohardness Testing of Al-7 wt%Si-Mg Alloys I. Geometrical and Mechanical Aspects, Mater. Sci. Eng. A, 2003, 361, p 232–23910.1016/S0921-5093(03)00513-6 ↗
24. M. Tiryakioğlu, J. Campbell, and J.T. Staley, On Macro Hardness Testing of Al-7 wt%Si-Mg Alloys II. An Evaluation of Models for Hardness-Yield Strength Relationships, Mater. Sci. Eng. A, 2003, 361, p 240–24810.1016/S0921-5093(03)00514-8 ↗
25. M. Tiryakioğlu, J.S. Robinson, M.A. Salazar-Guapuriche, Y.Y. Zhao, and P.D. Eason, Hardness-Strength Relationships in the Aluminum Alloy, Mater. Sci. Eng. A, 2015, 631, p 196–20010.1016/j.msea.2015.02.049 ↗
26. M. Tiryakioğlu and J.S. Robinson, On the Representative Strain in Vickers Hardness Testing of 7010 Aluminum Alloy, Mater. Sci. Eng. A, 2015, 641, p 231–23610.1016/j.msea.2015.06.038 ↗
27. M. Tiryakioğlu, On the Relationship Between Vickers Hardness and Yield Stress in Al-Zn-Mg-Cu Alloys, Mater. Sci. Eng. A, 2015, 633, p 17–1910.1016/j.msea.2015.02.073 ↗
28. S.J. Zinkle, D.H. Plantz, A.E. Biar, R.A. Dodd, and G.L. Kulcinski, Correlation of Yield Strength and Microhardness of High-Strength, High-Conductivity Copper Alloys, J. Nucl. Mater., 1985, 133, p 685–68910.1016/0022-3115(85)90236-3 ↗
29. S.C. Krishna, N.K. Gangwar, A.K. Jha, and B. Pant, On the Prediction of Strength from Hardness for Copper Alloys, J. Mater., 2013, 2013, p 1–610.1155/2013/352578 ↗
30. E.J. Pavlina and C.J. Van Tyne, Correlation of Yield Strength and Tensile Strength with Hardness of Steels, J. Mater. Eng. Perform., 2008, 17, p 888–89310.1007/s11665-008-9225-5 ↗
31. J.T. Busby, M.C. Hash, and G.S. Was, The Relationship Between Hardness and Yield Stress in Irradiated Austenitic and Ferritic Steels, J. Nucl. Mater., 2005, 336, p 267–27810.1016/j.jnucmat.2004.09.024 ↗
32. P. Zhang, S.X. Li, and Z.F. Zhang, General Relationship Between Strength and Hardness, Mater. Sci. Eng. A, 2011, 529, p 62–7310.1016/j.msea.2011.08.061 ↗
33. ASTM E112-96, Standard Test Method for Determining Average Grain Size, ASTM International, West Conshohocken, 2004
34. ASTM E92-03, Standard Test Method for Vickers Hardness of Metallic Materials, ASTM International, West Conshohocken, 2003
35. ASTM E8/E8 M-16a, Standard Test Method for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, 2016
36. S. Nandy, A.P. Sekhar, T. Kar, K.K. Ray, and D. Das, Influence of Ageing on the Low Cycle Fatigue Behavior of an Al-Mg-Si Alloy, Philos. Mag., 2017, 97, p p1978–p200310.1080/14786435.2017.1322729 ↗
37. A.P. Sekhar, S. Nandy, K.K. Ray, and D. Das, Artificial Ageing Response of an Al-Mg-Si Alloy—A Statistical Correlation, Perspect. Sci., 2016, 8, p 739–74210.1016/j.pisc.2016.06.075 ↗
38. S. Nandy, K.K. Ray, and D. Das, Process Model to Predict Yield Strength of AA6063 Alloy, Mater. Sci. Eng. A, 2015, 644, p 413–42410.1016/j.msea.2015.07.070 ↗
39. M.X. Guo, X.K. Zhang, J.S. Zhang, and L.Z. Zhuang, Effect of Zn Addition on the Precipitation Behaviors of Al-Mg-Si-Cu Alloys for Automotive Applications, J. Mater. Sci., 2017, 52, p 1390–140410.1007/s10853-016-0433-3 ↗
40. A. Chbihi, S. Vincent, J. Ribis, C. Toffolon-Masclet, and J. Garnier, Influence of Plastic Deformation on the Precipitation Sequence in an AA6061 Alloy, J. Mater. Sci., 2017, 52, p 6063–607310.1007/s10853-017-0845-8 ↗
41. Y. Han, D. Shao, B.A. Chen, Z. Peng, Z.X. Zhu, Q. Zhang, X. Chen, G. Liu, and X.M. Li, Effect of Mg/Si Ratio on the Microstructure and Hardness-Conductivity Relationship of Ultra-Grained Al-Mg-Si Alloys, J. Mater. Sci., 2017, 52, p 4445–445910.1007/s10853-016-0691-0 ↗
42. C.D. Marioara, H. Nordmark, S.J. Andersen, and R. Holmestad, Post-β″ Phases and Their Influence on Microstructure and Hardness in 6xxx Al-Mg-Si Alloys, J. Mater. Sci., 2006, 41, p 471–47810.1007/s10853-005-2470-1 ↗
43. L. Zhen, W.D. Fei, S.B. Kang, and H.W. Kim, Precipitation Behavior of Al-Mg-Si Alloys with High Silicon Content, J. Mater. Sci., 1997, 32, p p1895–p190210.1023/A:1018569226499 ↗
44. A.K. Gupta, D.J. Lloyd, and S.A. Court, Precipitation Hardening in Al-Mg-Si Alloys with and Without Excess Si, Mater. Sci. Eng. A, 2001, 316, p 11–1710.1016/S0921-5093(01)01247-3 ↗
45. R. Vissers, M.A. Van Huis, J. Jansen, H.W. Zandbergen, C.D. Marioara, and S.J. Andersen, The Crystal Structure of the β′ Phase in Al-Mg-Si Alloys, Acta Mater., 2007, 55, p 3815–382310.1016/j.actamat.2007.02.032 ↗
46. C.D. Marioara, S.J. Andersen, J. Jansen, and H.W. Zandbergen, Atomic Model for GP-Zones in a 6082 Al-Mg-Si System, Acta Mater., 2001, 49, p 321–32810.1016/S1359-6454(00)00302-5 ↗
47. J. Andersen, H.W. Zandbergen, J. Jancen, C. Traeholt, U. Tundal, and O. Reiso, The Crystal Structure of the β″ Phase in Al-Mg-Si Alloys, Acta Mater., 1998, 46, p 3283–329810.1016/S1359-6454(97)00493-X ↗
48. R. Vissers, C.D. Marioara, S.J. Andersen, and R. Holmestad, Aluminium Alloys, Proceedings of ICAA11, Vol 2, Sept 22–26, Aachen, Germany, 2008, p 1263–1269
49. S.J. Andersen, C.D. Marioara, R. Vissers, A. Frøseth, and H.W. Zandbergen, The Structural Relation Between Precipitates in Al-Mg-Si Alloys, the Al-Matrix and Diamond Silicon, with Emphasis on the Trigonal Phase U1-MgAl2Si2, Mater. Sci. Eng. A, 2007, 444, p 157–16910.1016/j.msea.2006.08.084 ↗
50. S.J. Andersen, C.D. Marioara, A. Frøseth, R. Vissers, and H.W. Zandbergen, Crystal Structure of the Orthorhombic U2-Al4Mg4Si4 Precipitate in the Al-Mg-Si Alloy System and Its Relation to the β′ and β″ Phases, Mater. Sci. Eng. A, 2005, 390, p 127–13810.1016/j.msea.2004.09.019 ↗
51. C. Ravi and C. Wolverton, First-Principles Study of Crystal Structure and Stability of Al-Mg-Si-(Cu) Precipitates, Acta Mater., 2004, 52, p 4213–422710.1016/j.actamat.2004.05.037 ↗
52. J.L. Cavazos and R. Colás, Quench Sensitivity of a Heat Treatable Aluminum Alloy, Mater. Sci. Eng. A, 2003, 361, p 171–17810.1016/S0921-5093(03)00616-6 ↗
53. D.M. Jiang, B.D. Hong, T.C. Lei, D.A. Downham, and G.W. Lorimer, Influence of Ageing Condition on Tensile and Fatigue Fracture Behaviour of Aluminium Alloy 6063, Mater. Sci. Technol., 1991, 7, p 1010–101410.1179/mst.1991.7.11.1010 ↗
54. J.P. Bourget, M. Fafard, H.R. Shakeri, and T.J. Côté, Optimization of Heat Treatment in Cold-Drawn 6063 Aluminium Tubes, J. Mater. Process. Technol., 2009, 209, p 5035–504110.1016/j.jmatprotec.2009.01.027 ↗
55. A. Munitz, C. Cotler, and M. Talianker, Aging Impact on Mechanical Properties and Microstructure of Al-6063, J. Mater. Sci., 2000, 35, p 2529–253810.1023/A:1004742407600 ↗
56. S. Malinov, Z. Guo, W. Sha, and A. Wilson, Differential Scanning Calorimetry Study and Computer Modeling of β-α Phase Transformation in a Ti-6Al-4V Alloy, Metall. Mater. Trans. A, 2001, 32, p 879–88710.1007/s11661-001-0345-x ↗
57. M.R. Shercliff and M.F. Ashby, A Process Model for Age Hardening of Aluminium Alloys-I. The model, Acta Mater., 1990, 38, p 1789–180210.1016/0956-7151(90)90291-N ↗
58. S. Pogatscher, H. Antrekowitsch, H. Leitner, T. Ebner, and P.J. Uggowitzer, Mechanisms Controlling the Artificial Aging of Al-Mg-Si Alloys, Acta Mater., 2011, 59, p 3352–336310.1016/j.actamat.2011.02.010 ↗
59. D.R. Squires and E.A. Wilson, Kinetics of Aging in an Fe-12Ni-6Mn Maraging Alloy, Metall. Trans. A, 1984, 15, p 1947–194810.1007/BF02664908 ↗
60. J. Mittra, U.D. Kulkarni, and G.K. Dey, Hardness Based Model for Determining the Kinetics of Precipitation, Mater. Sci. Eng. A, 2009, 500, p 244–24710.1016/j.msea.2008.09.056 ↗
61. S. Esmaeili, D.J. Lloyd, and W.J. Poole, Modeling of Precipitation Hardening for the Naturally Aged Al-Mg-Si-Cu Alloy AA6111, Acta Mater., 2003, 51, p 3467–348110.1016/S1359-6454(03)00167-8 ↗
62. D.A. Porter and K.E. Easterling, Phase Transformations in Metals and Alloys, 2nd ed., Chapman and Hall, London, 1992, p 291–30810.1007/978-1-4899-3051-4 ↗
63. E. Orowan, Symposium on Internal Stresses in Metals and Alloys, 1948, p 451
64. M.F. Ashby, Work Hardening of Dispersion-Hardened Crystals, Philos. Mag., 1966, 14, p 1157–117810.1080/14786436608224282 ↗
65. J.W. Martin, Precipitation Hardening, Vol 81, 2nd ed., Butterworth-Heinemann, Oxford, 1998, p 58–59
66. W. Sha and A.E. Long, Quantification of Overaging Hardening Kinetics of Aluminum Alloys, Metall. Mater. Trans. A, 2004, 35, p 2172–217410.1007/s11661-004-0166-9 ↗
67. J.W. Martin, R.D. Doherty, and B. Cantor, Stability of Microstructure in Metallic Systems, 2nd ed., Cambridge University Press, Cambridge, 199710.1017/CBO9780511623134 ↗
68. E. Hornbogen and E.A. Starke Jr., Theory Assisted Design of High Strength Low Alloy Aluminum, Acta Metall. Mater., 1993, 41, p 1–1610.1016/0956-7151(93)90334-O ↗
69. G.E. Dieter, Mechanical Metallurgy, 1st ed., McGraw-Hill Book Company, London, 1928, p 189
70. O.R. Myhr, O. Grong, and S.J. Andersen, Modelling of the Age Hardening Behavior of Al-Mg-Si Alloys, Acta Mater., 2001, 49, p 65–7510.1016/S1359-6454(00)00301-3 ↗
71. D. Liu, H.V. Atkinson, P. Kapranos, W. Jirattiticharoean, and H. Jones, Microstructural Evolution and Tensile Mechanical Properties of Thixoformed High Performance Aluminium Alloys, Mater. Sci. Eng. A, 2003, 361, p 213–22410.1016/S0921-5093(03)00528-8 ↗
72. B.W. Mott, Micro-indentation Hardness Testing, Butterworths, London, 1956, p 1–15
73. K.K. Ray and A.K. Dutta, Comparative Study on Indentation Fracture Toughness Evaluations of Soda–Lime–Silica Glass, Br. Ceram. Trans., 1999, 98, p 165–17110.1179/096797899680381 ↗
74. R.J. Flynn, Property Prediction and Residual Stresses in Aluminium Alloy 7010, Ph.D. Thesis, University of Limerick, Ireland, 2013
75. C. Feng, Z.Y. Liu, A.L. Ning, Y.B. Liu, and S.M. Zeng, Retrogression and Re-aging Treatment of Al-9.99% Zn-1.72% Cu-2.5% Mg-0.13% Zr Aluminum Alloy, Trans. Nonferrous Met. Soc., 2006, 16, p 1163–117010.1016/S1003-6326(06)60395-6 ↗
76. L.J.H. Brasche, D.J. Bracci, D.C. Jiles, and O. Buck, Correlation of Mechanical Properties with Non-destructive Evaluation Measurements in Al-Li Alloys, Mat. Sci. Eng. A, 1989, 119, p 7–1510.1016/0921-5093(89)90518-2 ↗
77. D.C. Balderach, J.A. Hamilton, E. Leung, M.C. Tejeda, J. Qjao, and E.M. Taleff, The Paint-Bake Response of Three Al-Mg-Zn Alloys, Mater. Sci. Eng. A, 2003, 339, p 194–20410.1016/S0921-5093(02)00158-2 ↗
78. A.E. Tekkaya, An Improved Relationship Between Vickers Hardness and Yield Stress for Cold Formed Materials and Its Experimental Verification, CRIP Ann. Manuf. Technol., 2000, 49, p 205–20810.1016/S0007-8506(07)62929-1 ↗
79. M.O. Lai and K.B. Lim, On the Prediction of Tensile Properties from Hardness Tests, J. Mater. Sci., 1991, 26, p 2031–203610.1007/BF00549163 ↗
80. M.N. Gusev, O.P. Maksimkin, O.V. Tivanova, N.S. Silnaygina, and F.A. Garner, Correlation of Yield Stress and Microhardness in 08Cr16Ni11Mo3 Stainless Steel Irradiated to High Dose in the BN-530 Fast Reactor, J. Nucl. Mater., 2006, 359, p 258–26210.1016/j.jnucmat.2006.09.005 ↗
81. L.C. Doan, Y. Ohmori, and K. Nakai, Precipitation and Dissolution Reactions in a 6061 Aluminum Alloy, Mater. Trans. JIM, 2000, 41, p 300–30510.2320/matertrans1989.41.300 ↗
82. E.A. Wilson, Quantification of Early Stages of Age Hardening in Fe-12Ni-6Mn Maraging Type Alloy, Mater. Sci. Technol., 1998, 14, p 277–28210.1179/mst.1998.14.4.277 ↗
83. D. Simonovic and M.H. Sluiter, Impurity Diffusion Activation Energies in Al from First Principles, Phys. Rev. B Condens. Matter, 2009, 79, p 05430410.1103/PhysRevB.79.054304 ↗
84. S. Camero, E.S. Puchi, and G. Gonzalez, Effect of 0.1% Vanadium Addition on Precipitation Behavior and Mechanical Properties of Al-6063 Commercial Alloy, J. Mater. Sci., 2006, 41, p 7361–737310.1007/s10853-006-0794-0 ↗
85. J.L. Cavazos and R. Colás, Precipitation in a Heat-Treatable Aluminum Alloy Cooled at Different Rates, Mater. Charact., 2001, 47, p 175–17910.1016/S1044-5803(01)00164-4 ↗
86. M.R. Rokni, A. Zarei-Hanzaki, A.A. Roostaei, and A. Abolhasani, Constitutive Base Analysis of a 7075 Aluminum Alloy During Hot Compression Testing, Mater. Des., 2011, 32, p 4955–496010.1016/j.matdes.2011.05.040 ↗
87. S. Srinivasulu and A. Jain, A Comparative Analysis of Training Methods for Artificial Neural Network Rainfall—Unoff Models, Appl. Soft Comput., 2006, 6, p 295–30610.1016/j.asoc.2005.02.002 ↗
88. M.C. Shaw and G.J. Desalvo, On the Plastic Flow Beneath a Blunt Axisymmetric Indenter, Trans. ASME J. Eng. Ind., 1970, 92, p 480–49410.1115/1.3427786 ↗
89. R.T. Shield, On the Plastic Flow of Metals Under Conditions of Axial Symmetry, Proc. R. Soc. Lond. A, 1955, 233, p 267–28710.1098/rspa.1955.0262 ↗
90. P.L. Larsson, Investigation of Sharp Contact at Rigid-Plastic Conditions, Int. J. Mech. Sci., 2001, 43, p 895–92010.1016/S0020-7403(00)00056-4 ↗
91. A.L. Rivas, P. Muñoz, S. Camero, and O. Quintero-Sayago, Effect of the Microstructure on the Mechanical Properties and Surface Finish of an Extruded AA-6063 Aluminum Alloy, Adv. Mater. Sci. Technol., 1999, 2, p 15–23
92. A.K. Gupta, D.J. Lloyd, and S.A. Court, Precipitation Hardening Processes in an Al-0.4%Mg-1.3%Si-0.25%Fe Aluminum Alloy, Mater. Sci. Eng. A, 2001, 301, p 140–14610.1016/S0921-5093(00)01814-1 ↗
93. Y.S. Sato and H. Kokawa, Distribution of Tensile Property and Microstructure in Friction Stir Weld of 6063 Aluminum, Metall. Mater. Trans. A, 2001, 32, p 3023–303110.1007/s11661-001-0177-8 ↗
94. G. Al-Marahleh, Effect of Heat Treatment Parameters on Distribution and Volume Fraction of Mg2Si in the Structural Al 6063 Alloy, Am. J. Appl. Sci., 2006, 3, p 1819–182310.3844/ajassp.2006.1819.1823 ↗
95. S.K. Panigrahi and R. Jayaganthan, A Study on Mechanical Properties of Cryorolled Al-Mg-Si alloy, Mater. Sci. Eng. A, 2008, 480, p 299–30510.1016/j.msea.2007.07.024 ↗
96. B. Rajasekaran, S.G.S. Raman, S.V. Joshi, and G. Sundararajan, Effect of Detonation Gun Sprayed Cu-Ni-In Coating on Plain Fatigue and Fretting Fatigue Behavior of Al-Mg-Si Alloy, Surf. Coat. Technol., 2006, 201, p 1548–155810.1016/j.surfcoat.2006.02.023 ↗
97. M. Das and G. Das, Role of Dynamic Precipitation on the Strengthening Mechanism of Cryorolled 6063 Al Alloy, Trans. Indian Inst. Met., 2011, 64, p 75–7910.1007/s12666-011-0015-7 ↗