Study on Corrosion Behavior of Q235 Steel in a Simulated Marine Tidal Environment
Source abstract
Abstract
In this paper, a tide simulation device was used to study the marine tidal corrosion of Q235 steel with scanning electron microscopy (SEM), ultra-depth 3D microscopy, and in situ electrochemical measurements. The results showed that the corrosion rates of the steel in the full immersion (FI) zone were low and fluctuated slightly, while the corrosion rates of the steel in the other zones were relatively high and increased from the 192nd h. The order of corrosion rates from high to low was middle tide (MT) zone, high tide (HT) zone, low tide (LT) zone, and FI zone. Uniform corrosion dominated the corrosion process of the steel in the FI zone, while corrosion pits were generated on the steel surface in the HT, MT, and LT zones during the experiment. The corrosion mechanism of the steel in marine tidal zones was discussed in the paper.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. J. Dong, E. Han and W. Ke, Introduction to Atmospheric Corrosion Research in China, Sci. Technol. Adv. Mater., 2007, 8, p 559–565.10.1016/j.stam.2007.08.010 ↗
2. Y. Fan, W. Liu, S. Li, T. Chowwanonthapunya, B. Wongpat, Y. Zhao, B. Dong, T. Zhang and X. Li, Evolution of Rust Layers on Carbon Steel and Weathering Steel in High Humidity and Heat Marine Atmospheric Corrosion, J. Mater. Sci. Technol., 2020, 39, p 190–199.10.1016/j.jmst.2019.07.054 ↗
3. M.A. Azam, S. Sukarti and M. Zaimi, Corrosion Behavior of API-5L-X42 Petroleum/Natural Gas Pipeline Steel in South China Sea and Strait of Melaka Seawaters, Eng. Fail. Anal., 2020, 115, p 104654.10.1016/j.engfailanal.2020.104654 ↗
4. M. Guo, C. Pan, Z. Wang and W. Han, A Study on the Initial Corrosion Behavior of Carbon Steel Exposed to a Simulated Coastal-Industrial Atmosphere, Acta Metall. Sin., 2018, 54(1), p 65–75.
5. Y. Ma, Y. Li and F. Wang, Corrosion of Low Carbon Steel in Atmospheric Environments of Different Chloride Content, Corros. Sci., 2009, 51, p 997–1006.10.1016/j.corsci.2009.02.009 ↗
6. Y. Wan, J. Tan, S. Zhu, J. Cui, K. Zhang, X. Wang, X. Shen, Y. Li and X. Zhu, Insight into Atmospheric Pitting Corrosion of Carbon Steel via a Dual-Beam FIB/SEM System Associated with High-Resolution TEM, Corros. Sci., 2019, 152, p 226–233.10.1016/j.corsci.2019.03.017 ↗
7. K. Ding, W. Guo, Ri. Qiu, J. Hou, L. Fan and Xu. Likun, Corrosion Behavior of Q235 Steel Exposed in Deepwater of South China Sea, J. Mater. Eng. Perform., 2018, 27, p 4489–4496.10.1007/s11665-018-3553-x ↗
8. L. Zhang, H. Shen, J. Sun, Y. Sun, Y. Fang, W. Cao, Y. Xing and Lu. Minxu, Effect of Calcareous Deposits on Hydrogen Permeation in X80 Steel under Cathodic Protection, Mater. Chem. Phys., 2018, 207, p 123–129.10.1016/j.matchemphys.2017.12.015 ↗
9. H.A. Humble, Cathodic Protection of Steel Piling in Sea Water, Corrosion, 1949, 5, p 292–302.10.5006/0010-9312-5.9.292 ↗
10. X. Zhu and X. Wang, Marine corrosion and protection of metallic materials, National Defense Industry Press, Beijing, 1999.
11. X. Feng, Q. Yan, L. Xiangyu, W. Tong, Y. Yiji Zhang and J.W. Zuo, Protection Performance of the Submerged Sacrificial Anode on the Steel Reinforcement in the Conductive Carbon Fiber Mortar Column in Splash Zones of Marine Environments, Corros. Sci., 2020, 174, p 108818.10.1016/j.corsci.2020.108818 ↗
12. Y. Huang, Yu. Xiuming, Q. Zhang and R.D.E. Marco, Corrosion Performance of High Strength Low Alloy Steel AISI 4135 in the Marine Splash Zone, Electrochemistry, 2017, 85(1), p 7–12.10.5796/electrochemistry.85.7 ↗
13. H.-H. Wang and D. Min, Corrosion Behavior of a Low-Carbon Steel in Simulated Marine Splash Zone, Acta Metal. Sin., 2017, 30(6), p 585–593. (English Letters)10.1007/s40195-017-0535-1 ↗
14. D. Zhang, X. Gao, Su. Guanqiao, Du. Linxiu, Z. Liu and Hu. Jun, Corrosion Behavior of Low-C Medium-Mn Steel in Simulated Marine Immersion and Splash Zone Environment, J. Mater. Eng. Perform., 2017, 26(12), p 2599–2607.10.1007/s11665-017-2723-6 ↗
15. Ph. Refait, M. Jeannin, R. Sabot, H. Antony and S. Pineau, Corrosion and Cathodic Protection of Carbon Steel in the Tidal Zone: Products, Mechanisms and Kinetics, Corros. Sci., 2015, 90, p 375–382.10.1016/j.corsci.2014.10.035 ↗
16. B. Pakenham, A. Ermakova and A. Mehmanparast, A Review of Life Extension Strategies for Offshore Wind Farms using Techno-economic Assessments, Energies, 2021, 14(7), p 1936.10.3390/en14071936 ↗
17. Mu. Xin, J. Wei, J. Dong and W. Ke, Electrochemical Study on Corrosion Behaviors of Mild Steel in a Simulated Tidal Zone, Acta Metall. Sin., 2013, 48, p 420–426.10.3724/SP.J.1037.2011.00666 ↗
18. Mu. Xin, J. Wei, J. Dong and W. Ke, In Situ Corrosion Monitoring of Mild Steel in a Simulated Tidal Zone without Marine Fouling Attachment by Electrochemical Impedance Spectroscopy, J. Mater. Sci. Technol., 2014, 30, p 1043–1050.10.1016/j.jmst.2014.03.013 ↗
19. L. Zhao, Mu. Xin, J. Dong, Wu. Liping, C. Wang and W. Ke, Study on the Galvanic Current of Corrosion Behavior for AH32 Long-Scale Specimen in Simulated Tidal Zone, Acta Metall. Sin., 2017, 53(11), p 36–43.
20. M. Yan, C. Sun, Xu. Jin, J. Dong and W. Ke, Role of Fe Oxides in Corrosion of Pipeline Steel in a Red Clay Soil, Corros. Sci., 2014, 80, p 309–317.10.1016/j.corsci.2013.11.037 ↗
21. B.-Y. Chang, Conversion of a Constant Phase Element to an Equivalent Capacitor, J. Electrochem. Sci. Technol., 2020, 11, p 318–321.10.33961/jecst.2020.00815 ↗
22. A. Wierzbicka-Miernik, J. Guspiel and L. Zabdyr, Corrosion Behavior of Lead-Free SAC-Type Solder Alloys in Liquid Media, Arch. Civil Mech. Eng., 2015, 15, p 206–213.10.1016/j.acme.2014.03.003 ↗
23. Wu. Wei, X. Cheng, H. Hou, Bo. Liu and X. Li, Insight into the Product Film Formed on Ni-Advanced Weathering Steel in a Tropical Marine Atmosphere, Appl. Surf. Sci., 2018, 436, p 80–89.10.1016/j.apsusc.2017.12.018 ↗
24. J. Xueli, W. Linjian, C. Lin, X. Yang and C. Yang, Prediction of Chloride Concentration with Elevation in Concrete Exposed to Cyclic Drying-Wetting Conditions in Marine Environments, Construc. Build. Mater., 2021, 278, p 122370.10.1016/j.conbuildmat.2021.122370 ↗
25. Z. Liu, C. Dong, Z. Jia and X. Li, Pitting Corrosion of X70 Pipeline Steel in the Simulated Wet Storage Environment, Acta Metall. Sin., 2011, 47(8), p 1009–1016.
26. M. Li, H. Lin and C. Cao, Study on Soil Corrosion of Carbon Steel by Electrochemical Impedance Spectroscopy(EIS), J. Chin. Soc. Corros. Prot., 2000, 20(2), p 111–117.
27. L. Hao, S. Zhang, J. Dong and W. Ke, Evolution of Corrosion of MnCuP Weathering Steel Submitted to Wet/Dry Cyclic Tests in a Simulated Coastal Atmosphere, Corros. Sci., 2012, 58, p 175–180.10.1016/j.corsci.2012.01.017 ↗
28. M. Yan, C. Sun, J. Dong, Xu. Jin and W. Ke, Electrochemical Investigation on Steel Corrosion in Iron-Rich Clay, Corros. Sci., 2015, 97, p 62–73.10.1016/j.corsci.2015.04.013 ↗
29. Z. Zhou, W. Tangqing, M. Liu, B. Wang, C. Li and F. Yin, Accelerating Role of Microbial Film on Soil Corrosion of Pipeline Steel, Int. J. Press. Vess. Pip., 2021, 192, p 104395.10.1016/j.ijpvp.2021.104395 ↗
30. Hu. Shengbo, Yu. Li Liu, Y.L. Cui and F. Wang, Influence of Hydrostatic Pressure on the Corrosion Behavior of 90/10 Copper-Nickel Alloy Tube under Alternating Dry and Wet Condition, Corros. Sci., 2019, 146, p 202–212.10.1016/j.corsci.2018.10.036 ↗
31. X.S. Du, Y.J. Su, J.X. Li, L.J. Qiao and W.Y. Chu, Stress Corrosion Cracking of A537 Steel in Simulated Marine Environments, Corros. Sci., 2012, 65, p 278–287.10.1016/j.corsci.2012.08.025 ↗
32. A.P. Yadav, A. Nishikata and T. Tsuru, Electrochemical Impedance Study on Galvanized Steel Corrosion under Cyclic Wet-Dry Conditions––Influence of Time of Wetness, Corros. Sci., 2004, 46, p 169–181.10.1016/S0010-938X(03)00130-6 ↗
33. K. Gong, W. Ming, F. Xie, G. Liu and D. Sun, Effect of Dry/Wet Ratio and pH on the Stress Corrosion Cracking Behavior of Rusted X100 Steel in an Alternating Dry/Wet Environment, Construc. Build. Mater., 2020, 260, p 120478.10.1016/j.conbuildmat.2020.120478 ↗