Nanoindentation Creep Behavior of CoCrFeNiMn High-Entropy Alloy under Different High-Pressure Torsion Deformations
Source abstract
Abstract
CoCrFeNiMn high-entropy alloy (HEA) has gained increasing attention in recent years. In this work, CoCrFeNiMn HEA was prepared by arc melting and casting method; and high-pressure torsion (HPT) technology was used to refine the grains. A series of nanoindentation experiments was used to investigate the effect of different loading rates and deformations on the nanoindentation creep behavior of the CoCrFeNiMn HEA. The results show that the grain size of the CoCrFeNiMn HEA refines to the nanoscale after HPT. However, grain refinement is not obvious with further increasing HPT rotation. The loading rate and HPT rotations have an obvious effect on the nanoindentation creep behaviors of the CoCrFeNiMn HEA. The creep behaviors of the as-cast and HPT-treated CoCrFeNiMn HEA may be controlled by dislocations and the collective effect of GB sliding and dislocations, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6, p 299–30310.1002/adem.200300567 ↗
2. B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie, A Fracture-Resistant High-Entropy Alloy for Cryogenic Applications, Science, 2014, 345, p 1153–115710.1126/science.1254581 ↗
3. J.W. Yeh, Recent Progress in High-Entropy Alloys, Ann. Chim. Sci. des Mat., 2006, 31, p 633–64810.3166/acsm.31.633-648 ↗
4. D.H. Xiao, P.F. Zhou, W.Q. Wu, H.Y. Diao, M.C. Gao, M. Song, and P.K. Liaw, Microstructure, Mechanical and Corrosion Behaviors of AlCoCuFeNi-(Cr, Ti) High Entropy Alloys, Mater. Des., 2017, 116, p 438–44710.1016/j.matdes.2016.12.036 ↗
5. P.P. Bhattacharjee, G.D. Sathiaraj, M. Zaid, J.R. Gatti, C. Lee, C.W. Tsai, and J.W. Yeh, Microstructure and Texture Evolution During Annealing of Equiatomic CoCrFeMnNi High-Entropy Alloy, J. Alloy. Compd., 2014, 587, p 544–55210.1016/j.jallcom.2013.10.237 ↗
6. G. Laplanche, O. Horst, F. Otto, G. Eggeler, and E.P. George, Microstructural Evolution of a CoCrFeMnNi High-Entropy Alloy after Swaging and Annealing, J. Alloy. Compd., 2015, 647, p 548–55710.1016/j.jallcom.2015.05.129 ↗
7. D.H. Lee, J.A. Lee, Y.K. Zhao, Z.P. Lu, J.Y. Suh, J.Y. Kim, U. Ramamurty, M. Kawasaki, T.G. Langdon, and J. Jang, Annealing Effect on Plastic Flow in Nanocrystalline CoCrFeMnNi High-Entropy Alloy: A Nanomechanical Analysis, Acta Mater., 2017, 140, p 443–45110.1016/j.actamat.2017.08.057 ↗
8. D. Kumar, O. Maulik, V.K. Sharma, Y.V.S.S. Prasad, and V. Kumar, Understanding the Effect of Tungsten on Corrosion Behavior of AlCuCrFeMnWx High-Entropy Alloys in 3.5 wt.% NaCl Solution, J. Mater. Eng. Perform., 2018, 27, p 4481–448810.1007/s11665-018-3536-y ↗
9. W. Ji, W.M. Wang, H. Wang, J.Y. Zhang, Y.C. Wang, F. Zhang, and Z.Y. Fu, Alloying Behavior and Novel Properties of CoCrFeNiMn High-Entropy Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering, Intermetallics, 2015, 56, p 24–2710.1016/j.intermet.2014.08.008 ↗
10. M. Zhang, X.L. Zhou, and J.H. Li, Microstructure and Mechanical Properties of a Refractory CoCrMoNbTi High-Entropy Alloy, J. Mater. Eng. Perform., 2017, 26, p 3657–366510.1007/s11665-017-2799-z ↗
11. Z.M. Li, K.G. Pradeep, Y. Deng, D. Raabe, and C.C. Tasan, Metastable High-Entropy Dual-Phase Alloys Overcome the Strength-Ductility Trade-Off, Nature, 2016, 534, p 227–23010.1038/nature17981 ↗
12. W. Woo, E.W. Huang, J.W. Yeh, H. Choo, C. Lee, and S.Y. Tu, In-situ Neutron Diffraction Studies on High-Temperature Deformation Behavior in a CoCrFeMnNi High Entropy Alloy, Intermetallics, 2015, 62, p 1–610.1016/j.intermet.2015.02.020 ↗
13. D.H. Lee, M.Y. Seok, Y.K. Zhao, I.C. Choi, J.Y. He, Z.P. Lu, J.Y. Suh, U. Ramamurty, M. Kawasaki, T.G. Langdon, and J. Jang, Spherical Nanoindentation Creep Behavior of Nanocrystalline and Coarse Grained CoCrFeMnNi High-Entropy Alloys, Acta Mater., 2016, 109, p 314–32210.1016/j.actamat.2016.02.049 ↗
14. L. Patriarca, A. Ojha, H. Sehitoglu, and Y.I. Chumlyakov, Slip Nucleation in Single Crystal FeNiCoCrMn High Entropy Alloy, Scripta Mater., 2016, 112, p 54–5710.1016/j.scriptamat.2015.09.009 ↗
15. Y. Liu, J.S. Wang, Q.H. Fang, B. Liu, Y. Wu, and S.Q. Chen, Preparation of Superfine-Grained High Entropy Alloy by Spark Plasma Sintering Gas Atomized Powder, Intermetallics, 2016, 68, p 16–2210.1016/j.intermet.2015.08.012 ↗
16. G.D. Sathiaraj and P.P. Bhattacharjee, Effect of Cold-Rolling Strain on the Evolution of Annealing Texture of Equiatomic CoCrFeMnNi High Entropy Alloy, Mater. Charact., 2015, 109, p 189–19710.1016/j.matchar.2015.09.027 ↗
17. B. Schuh, F. Martin, B. Völker, E.P. George, H. Clemens, R. Pippan, and A. Hohenwarter, Mechani Mendez Cal Properties, Microstructure and Thermal Stability of a Nanocrystalline CoCrFeMnNi High-Entropy Alloy after Severe Plastic Deformation, Acta Mater., 2015, 96, p 258–26810.1016/j.actamat.2015.06.025 ↗
18. N. Stepanov, M. Tikhonovsky, N. Yurchenko, D. Zyabkin, M. Klimova, S. Zherebtsov, A. Efimov, and G. Salishchev, Effect of Cryo-Deformation on Structure and Properties of CoCrFeNiMn High-Entropy Alloy, Intermetallics, 2015, 59, p 8–1710.1016/j.intermet.2014.12.004 ↗
19. G.D. Sathiaraj, P.P. Bhattacharjee, C.W. Tsai, and J.W. Yeh, Effect of Heavy Cryo-Rolling on the Evolution of Microstructure and Texture during Annealing of Equiatomic CoCrFeMnNi High Entropy Alloy, Intermetallics, 2016, 69, p 1–910.1016/j.intermet.2015.10.005 ↗
20. V. Maier-Kiener, B. Schuh, E.P. George, H. Clemens, and A. Hohenwarter, Nanoindentation Testing as a Powerful Screening Tool for Assessing Phase Stability of Nanocrystalline High-Entropy Alloys, Mater. Des., 2017, 115, p 479–48510.1016/j.matdes.2016.11.055 ↗
21. N.D. Stepanov, D.G. Shaysultanov, NYu Yurchenko, S.V. Zherebtsov, A.N. Ladygin, G.A. Salishchev, and M.A. Tikhonovsky, High Temperature Deformation Behavior and Dynamic Recrystallization in CoCrFeNiMn High Entropy Alloy, Mater. Sci. Eng. A, 2015, 636, p 188-19510.1016/j.msea.2015.03.097 ↗
22. V.I. Kyryliv, Improvement of the Wear Resistance of Medium-Carbon Steel by Nanodispersion of Surface Layers, Mater. Sci., 2012, 48, p 119–12310.1007/s11003-012-9481-2 ↗
23. M. Kerr and N. Chawla, Creep Deformation Behavior of Sn-3.5Ag Solder/Cu Couple at Small Length Scales, Acta Mater., 2004, 52, p 4527–453510.1016/j.actamat.2004.06.010 ↗
24. Y. Ma, G.J. Peng, D.H. Wen, and T.H. Zhang, Nanoindentation Creep Behavior in a CoCrFeCuNi High-Entropy Alloy Film with Two Different Structure States, Mater. Sci. Eng. A, 2015, 621, p 111–11710.1016/j.msea.2014.10.065 ↗
25. L.J. Zhang, P.F. Yu, H. Cheng, H. Zhang, H.Y. Diao, Y.Z. Shi, B.L. Chen, P.Y. Chen, R. Feng, J. Bai, Q. Jing, M.Z. Ma, P.K. Liaw, G. Li, and R.P. Liu, Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy, Metall. Mater. Trans. A, 2016, 47, p 5871–587510.1007/s11661-016-3469-8 ↗
26. C.L. Wang, M. Zhang, and T.G. Nieh, Nanoindentation Creep of Nanocrystalline Nickel at Elevated Temperatures, J. Phys. D Appl. Phys., 2009, 42, p 11540510.1088/0022-3727/42/11/115405 ↗
27. X.Y. Wang, P. Gong, L. Deng, J.S. Jin, S.B. Wang, and P. Zhou, Nanoindentation Study on the Room Temperature Creep Characteristics of a Senary Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 High Entropy Bulk Metallic Glass, J. Non-Crys. Solids, 2017, 470, p 27–3710.1016/j.jnoncrysol.2017.04.041 ↗
28. P. Gong, J.S. Jin, L. Deng, S.B. Wang, J.L. Gu, K.F. Yao, and X.Y. Wang, Room Temperature Nanoindentation Creep Behavior of TiZrHfBeCu(Ni) High Entropy Bulk Metallic Glasses, Mater. Sci. Eng. A, 2017, 688, p 174–17910.1016/j.msea.2017.01.094 ↗
29. F.C. Li, J. Gu, M. Song, S. Ni, and S.F. Guo, The Evolution of Local Mechanical Properties of Bulk Metallic Glasses Caused by Structural Inhomogeneity, J. Alloy. Compd., 2014, 591, p 315–31910.1016/j.jallcom.2013.12.182 ↗
30. P.F. Yu, H. Cheng, L.J. Zhang, H. Zhang, Q. Jing, M.Z. Ma, P.K. Liaw, G. Li, and R.P. Liu, Effects of High Pressure Torsion on Microstructures and Properties of an Al0.1CoCrFeNi High-Entropy Alloy, Mater. Sci. Eng. A, 2016, 655, p 283–29110.1016/j.msea.2015.12.085 ↗
31. C. Zhu, Z.P. Lu, and T.G. Nieh, Incipient Plasticity and Dislocation Nucleation of FeCoCrNiMn High-Entropy Alloy, Acta Mater., 2013, 61, p 2993–300110.1016/j.actamat.2013.01.059 ↗
32. M. Komarasamy, N. Kumar, R.S. Mishra, and P.K. Liaw, Anomalies in the Deformation Mechanism and Kinetics of Coarse-Grained High Entropy Alloy, Mater. Sci. Eng. A, 2016, 654, p 256–26310.1016/j.msea.2015.12.063 ↗
33. K. Edalati, D. Akama, A. Nishio, S. Lee, Y. Yonenaga, J.M. Cubero-Sesin, and Z. Horita, Influence of Dislocation–Solute Atom Interactions and Stacking Fault Energy on Grain Size of Single-Phase Alloys after Severe Plastic Deformation using High-Pressure Torsion, Acta Mater., 2013, 69, p 68–7710.1016/j.actamat.2014.01.036 ↗
34. W.Q. Wu, M. Song, S. Ni, J.S. Wang, Y. Liu, B. Liu, and X.Z. Liao, Dual Mechanisms of Grain Refinement in a FeCoCrNi High-Entropy Alloy Processed by High-Pressure Torsion, Sci. Rep., 2017, 7, p 4672010.1038/srep46720 ↗
35. F.C. Li, M. Song, S. Ni, S.F. Guo, and X.Z. Liao, Correlation between Hardness and Shear Banding of Metallic Glasses under Nanoindentation, Mater. Sci. Eng. A, 2016, 657, p 38–4210.1016/j.msea.2016.01.048 ↗
36. W.C. Oliver and G.M. Pharr, An Improved Technique for Determining Hardness and Elastic Modulus using Load and Displacement Sensing Indentation Experiments, J. Mater. Res., 2011, 7, p 1564–158310.1557/JMR.1992.1564 ↗
37. L. Tian, Z.M. Jiao, G.Z. Yuan, S.G. Ma, Z.H. Wang, H.J. Yang, Y. Zhang, and J.W. Qiao, Effect of Strain Rate on Deformation Behavior of AlCoCrFeNi High-Entropy Alloy by Nanoindentation, J. Mater. Eng. Perform., 2016, 25, p 2255–226010.1007/s11665-016-2082-8 ↗
38. F.C. Li, Y. Xie, M. Song, S. Ni, S.F. Guo, and X.Z. Liao, A Detailed Appraisal of the Stress Exponent used for Characterizing Creep Behavior in Metallic Glasses, Mater. Sci. Eng. A, 2016, 654, p 53–5910.1016/j.msea.2015.12.025 ↗
39. Z.J. Wang, S. Guo, Q. Wang, Z.Y. Liu, J.C. Wang, Y. Yang, and C.T. Liu, Nanoindentation Characterized Initial Creep Behavior of a High-Entropy-Based Alloy CoFeNi, Intermetallics, 2014, 53, p 183–18610.1016/j.intermet.2014.05.007 ↗
40. T.G. Langdon, Grain Boundary Sliding Revisited: Developments in Sliding over Four Decades, J. Mater. Sci., 2006, 41, p 597–60910.1007/s10853-006-6476-0 ↗
41. A.H. Chokshi, High Temperature Deformation in Fine Grained High Entropy Alloys, Mater. Chem. Phys., 2018, 210, p 152–16110.1016/j.matchemphys.2017.07.079 ↗
42. B. Wang, H.Y. He, M. Naeem, S. Lan, S. Harjo, T. Kawasaki, Y.X. Nie, H.W. Kui, T. Ungár, D. Ma, A.D. Stoica, Q. Li, Y.B. Ke, C.T. Liu, and X.L. Wang, Deformation of CoCrFeNi High Entropy Alloy at Large Strain, Scripta Mater., 2018, 155, p 54–5710.1016/j.scriptamat.2018.06.013 ↗