Friction and Wear of Nanoadditive-Based Biolubricants in Steel–Steel Sliding Contacts: A Comparative Study
Source abstract
Abstract
The present work deals with the study of tribo-pair interaction in lubricated sliding contacts. By considering the environmental issues, the sunflower oil was extracted from the sunflower seeds and used as a base lubricant. The two types of the nanoadditives, i.e., CuO and CeO2, varying concentrations from 0.10 to 0.50% w/v were used to formulate the nanolubricants. The compatibility/synergism of the nanoadditives was examined from antifriction and antiwear behavior study with four-ball tester. Also, sunflower oil was modified by the chemical method to improve its fatty acid structure. A comparative tribological and compatibility study was also done in modified oil at similar concentration levels with both types of nanoparticles. The tribological test result exhibits 0.10% w/v concentration of the nanoadditive as optimum due to lowest wear scar and coefficient of friction. Higher concentration of the nanoparticles impaired the base oil performance. Different analytical tools were used to characterize the oil modification and worn surfaces. Moreover, the role of subsurface of the contacting material with the tribological performance has been reported.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lubricants and Their Additives · Tribology and Wear Analysis · Tribology and Lubrication Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. S.M. Alves, B.S. Barros, M.F. Trajano, K.S.B. Ribeiro, and E. Moura, Tribological Behavior of Vegetable Oil-Based Lubricants with Nanoparticles of Oxides in Boundary Lubrication Conditions, Tribol. Int., 2013, 65, p 28–3610.1016/j.triboint.2013.03.027 ↗
2. S.-W. Zhang, Green Tribology: Fundamentals and Future Fevelopment, Friction, 2013, 1(2), p 186–19410.1007/s40544-013-0012-4 ↗
3. P. Nagendramma and S. Kaul, Development of ecofriendly/biodegradable lubricant: an overview, Renew. Sustain. Energy Rev., 2012, 16, p 764–77410.1016/j.rser.2011.09.002 ↗
4. N.J. Fox and G.W. Stachowiak, Vegetable oil-based lubricants—a review of oxidation, Tribol. Int., 2007, 40(7), p 1035–104610.1016/j.triboint.2006.10.001 ↗
5. C.J. Reeves and P.L. Menezes, Evaluation of boron nitride particles on the tribological performance of avocado and canola oil for energy conservation and sustainability, Int. J. Adv. Manuf. Technol., 2017, 89(9), p 3475–348610.1007/s00170-016-9354-1 ↗
6. S.Z. Erhan, B.K. Sharma, and J.M. Perez, Oxidation and low temperature stability of vegetable oil-based lubricants, Ind. Crops Prod., 2006, 24, p 292–29910.1016/j.indcrop.2006.06.008 ↗
7. S.-F. Snežana, J. Milovan, and S.P. Zoran, Kinetics of in situ epoxidation of soybean oil in bulk catalyzed by ion exchange resin, J. Am. Oil Chem. Soc., 2001, 78(7), p 725–73110.1007/s11746-001-0333-9 ↗
8. B.M. Abdullah and J. Salimon, Epoxidation of vegetable oils and fatty acids: catalysts, method and advantages, J. Appl. Sci., 2010, 10(15), p 1545–155310.3923/jas.2010.1545.1553 ↗
9. S.-F. Snežana, J. Milovan, and B. Olga, Epoxidation of castor oil with peracetic acid formed in situ in the presence of an ion exchange resin, Chem. Eng. Process., 2012, 62, p 106–11310.1016/j.cep.2012.08.005 ↗
10. W.L.Y. Hsien, Utilization of vegetable oil as bio-lubricant and additive, Towards Green Lubr. Mach., Springer Briefs in Green Chemistry for Sustainability, 2015, p 7–17. https://doi.org/10.1007/978-981-287-266-1_2 .10.1007/978-981-287-266-1_2 ↗
11. P.-P. Laura, T.-T. Jaime, G. Andrés, M. Demófilo, A.G. Jesús, M. David, P. Eduardo, and C. Pablo, Antiwear and extreme pressure properties of nanofluids for industrial applications, Tribol. Trans., 2014, 57(6), p 1072–107610.1080/10402004.2014.933937 ↗
12. B.K. Prasad, S. Rathod, M.S. Yadav, and O.P. Modi, Sliding wear behavior of a cast iron: influence of MoS2 and graphite addition to the oil lubricant, J. Mater. Eng. Perform., 2011, 20, p 445–45510.1007/s11665-010-9689-y ↗
13. B.K. Prasad, Lubricated sliding wear behavior of a cast iron: effect of graphite and/or talc fraction in oil, J. Mater. Eng. Perform., 2010, 19, p 413–42010.1007/s11665-009-9480-0 ↗
14. M.K. Dubey, J. Bijwe, and S.S.V. Ramakumar, PTFE based nano-lubricants, Wear, 2013, 306, p 80–8810.1016/j.wear.2013.06.020 ↗
15. G.-J. Lee, J.-J. Park, M.-K. Lee, and C.K. Rhee, Stable dispersion of nanodiamonds in oil and their tribological properties as lubricant additives, Appl. Surf. Sci., 2017, 415, p 24–2710.1016/j.apsusc.2016.12.109 ↗
16. A.H. Battez, R. González, J.L. Viesca, J.E. Fernández, J.M.D. Fernández, A. Machado, R. Chou, and J. Riba, CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricants, Wear, 2008, 265, p 422–42810.1016/j.wear.2007.11.013 ↗
17. R.N. Gupta and A.P. Harsha, Synthesis, characterization, and tribological studies of calcium–copper–titanate nanoparticles as a biolubricant additive, Trans ASME J Tribol, 2017, 139(2), p 021801-1–021801-1110.1115/1.4033714 ↗
18. W. Dai, B. Kheireddin, H. Gao, and H. Liang, Role of nanoparticles in oil lubrication, Tribol. Int., 2016, 102, p 88–9810.1016/j.triboint.2016.05.020 ↗
19. R.B. Rastogi, J.L. Maurya, and V. Jaiswal, Zero SAPs and ash free antiwear additives: schiff bases of salicylaldehyde with 1,2-Phenylenediamine, 1,4-Phenylenediamine, and 4,4′-Diaminodiphenylenemethane and their synergistic interactions with borate ester, Tribol. Trans., 2013, 56, p 592–60610.1080/10402004.2012.748115 ↗
20. X. Yang, H. Pan, P. Wang, and F.-J. Zhao, Particle-specific toxicity and bioavailability of cerium oxide (CeO2) nanoparticles to Arabidopsis thaliana, J. Hazard. Mater., 2017, 322, p 292–30010.1016/j.jhazmat.2016.03.054 ↗
21. Y. Ma, L. Kuang, X. He, W. Bai, Y. Ding, Z. Zhang, Y. Zhao, and Z. Chai, Effects of rare earth oxide nanoparticles on root elongation of plants, Chemosphere, 2010, 78(3), p 273–27910.1016/j.chemosphere.2009.10.050 ↗
22. X. Pang, D. Li, and A. Peng, Application of rare earth elements in the agriculture of China and its environmental behavior in soil, J. Soils Sediments, 2001, 1(2), p 124–12910.1007/BF02987718 ↗
23. A. Pinna, L. Malfatti, G. Galleri, R. Manetti, S. Cossu, G. Rocchitta, R. Migheli, P.A. Serra, and P. Innocenzi, Ceria nanoparticles for the treatment of Parkinson-like diseases induced by chronic manganese intoxication, RSC Adv, 2015, 5, p 20432–2043910.1039/C4RA16265J ↗
24. S.A. Kuddus, Nanoceria and its perspective in cancer treatment, J Cancer Sci Ther, 2017, 9(3), p 368–37310.4172/1948-5956.1000444 ↗
25. D. Barbara, S. Sandro, B. Elisabetta, D.L. Silvia, R.A. Phani, F. Stefano, A. Fernanda, P.C. Maria, and C. Annamaria, Cerium oxide nanoparticles trigger neuronal survival in a human alzheimer disease model by modulating BDNF pathway, Curr Nanosci, 2009, 5(2), p 167–17610.2174/157341309788185523 ↗
26. A. Adhvaryu and S.Z. Erhan, Epoxidized soybean oil as a potential source of high temperature lubricants, Ind. Crops Prod., 2002, 15, p 247–25410.1016/S0926-6690(01)00120-0 ↗
27. J. Salimon, N. Salih, and E. Yousif, Synthetic biolubricant basestocks from epoxidized ricinoleic acid: improved low temperature properties, J. Chem. Chem. Eng., 2011, 60(3), p 127–134
28. H. Ghaednia and R.L. Jackson, The effect of nanoparticles on the real area of contact, friction, and wear, Trans. ASME J. Tribol., 2013, 135, p 041603-1–041603-1010.1115/1.4024297 ↗
29. P. Sahoo, Engineering Tribology, Chapter 2, 3rd ed., PHI, learning pvt ltd, Delhi, 2005, p 5–20
30. D.X. Peng, Y. Kang, R.M. Hwang, S.S. Shyr, and Y.P. Chang, Tribological properties of diamond and SiO2 nanoparticles added in paraffin, Tribol. Int., 2009, 42, p 911–91710.1016/j.triboint.2008.12.015 ↗
31. H. Ghaednia, R.L. Jackson, and J.M. Khodadadi, Experimental analysis of stable CuO nanoparticle enhanced lubricants, J. Exp. Nanosci., 2015, 10, p 1–1810.1080/17458080.2013.778424 ↗
32. R. Wäsche, M. Hartelt, V.-D. Hodoroaba, Analysis of nanoscale wear particles from lubricated steel-steel contacts, Tribol. Lett., 2015, 58(3), p 1–10. Article number 4910.1007/s11249-015-0534-1 ↗
33. B. Li, X. Wang, W. Liu, and Q. Xue, Tribochemistry and antiwear mechanism of organic-inorganic nanoparticles as lubricant additives, Tribol. Lett., 2006, 22, p 79–8410.1007/s11249-005-9002-7 ↗
34. V. Jaiswal, R.B. Rastogi, R. Kumar, L. Singh, and K.D. Mandal, Tribological studies of stearic acid-modified CaCu2.9Zn0.1Ti4O12 nanoparticles as effective zero SAPS antiwear lubricant additives in paraffin oil, J. Mater. Chem. A, 2014, 2, p 375–38610.1039/C3TA12845H ↗