Low Cost Joining of Inconel 625 and Super Duplex Stainless Steel 2507 through Novel Technique
Source abstract
Abstract
In this research, a novel joining technique has been developed which utilizes microwave energy to produce dissimilar joints of Inconel 625 and SAF 2507. In this, graphite rods (instead of charcoal powder used previously) have been used as susceptor for initiating the joining process. Application of graphite rods has helped in not only concentrating the heat near the joint region but it also makes the modified process cleaner than its earlier version due to absence of charcoal powder. Proposed process is able to produce the dissimilar joint in 380 s (3-mm-thick joints) only as compared to 1260 s (6-mm-thick joints) required for producing similar joints of Inconel 625 by previous microwave hybrid heating technique. The proposed process is low cost due to the absence of filler powder. Three dissimilar joints have been developed by using the proposed technique and their microhardness, tensile strength, percent elongation and microstructure have been studied.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave-Assisted Synthesis and Applications · Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. R.R. Mishra and A.K. Sharma, A Review of Research Trends in Microwave Processing of Metal-Based Materials and Opportunities in Microwave Metal Casting, Crit. Rev. Solid State Mater. Sci., 2016, 41, p 217–255. https://doi.org/10.1080/10408436.2016.114242110.1080/10408436.2016.1142421 ↗
2. K.D. Ramkumar, S. Oza, S. Periwal, N. Arivazhagan, R. Sridhar , and S. Narayanan, Characterization of Weld Strength and Toughness in the Multi-Pass Welding of Inconel 625 and Super-Duplex Stainless Steel UNS S32750, Cienc. Technol. Dos Mater., 2015, 27, p 41–52. https://doi.org/10.1016/j.ctmat.2015.04.00410.1016/j.ctmat.2015.04.004 ↗
3. R. Samyal, A.K. Bagha , and R. Bedi, Evaluation of Modal Characteristics of SS202-SS202 Lap Joint Produced Using Selective Microwave Hybrid Heating, J. Manuf. Process., 2021, 68, p 1–13. https://doi.org/10.1016/j.jmapro.2021.07.01810.1016/j.jmapro.2021.07.018 ↗
4. R.I. Badiger, S. Narendranath , and M.S. Srinath, Joining of Inconel-625 Alloy Through Microwave Hybrid Heating and Its Characterization, J. Manuf. Process., 2015, 18, p 117–123. https://doi.org/10.1016/j.jmapro.2015.02.00210.1016/j.jmapro.2015.02.002 ↗
5. R.I. Badiger, S. Narendranath , and M.S. Srinath, Microstructure and Mechanical Properties of Inconel-625 Welded Joint Developed Through Microwave Hybrid Heating, J. Eng. Manuf., 2017, 232, p 1–16. https://doi.org/10.1177/095440541769735010.1177/0954405417697350 ↗
6. M.S. Srinath, A.K. Sharma , and P. Kumar, A Novel Route for Joining of Austenitic Stainless Steel (SS-316) Using Microwave Energy, Proc. Inst. Mech. Eng. Part B J. Eng. Manuf., 2011, 225, p 1083–1091. https://doi.org/10.1177/204129751039345110.1177/2041297510393451 ↗
7. L. Bagha, S. Sehgal , and A. Thakur, Comparative Analysis of Microwave Based Joining/Welding of SS304-SS304 Using Different Interfacing Materials, MATEC Web Conf., 2016, 57, p 1–4. https://doi.org/10.1051/matecconf/2016570300110.1051/matecconf/20165703001 ↗
8. A. Bansal, A.K. Sharma, S. Das , and P. Kumar, On Microstructure and Strength Properties of Microwave Welded INCONEL 718/ Stainless Steel (SS-316L), Proc. Inst. Mech Eng. Part L J. Mater. Des. Appl., 2016, 230, p 939–948. https://doi.org/10.1177/146442071558920610.1177/1464420715589206 ↗
9. R.I. Badiger, S. Narendranath , and M.S. Srinath, Optimization of Parameters Influencing Tensile Strength of Inconel- 625 Welded Joints Developed Through Microwave Hybrid Heating, Mater. Today Proc., 2018, 5, p 7659–7667. https://doi.org/10.1016/j.matpr.2017.11.44110.1016/j.matpr.2017.11.441 ↗
10. K.S. Prasad, S.R. Chalamalasetti , and N.R. Damera, Application of Grey Relational Analysis for Optimizing Weld Bead Geometry Parameters of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets, Int. J. Adv. Manuf. Technol., 2015, 78, p 625–632. https://doi.org/10.1007/s00170-014-6665-y10.1007/s00170-014-6665-y ↗
11. S.P. Kondapalli, S.R. Chalamalasetti , and N.R. Damera, Optimization of Fusion Zone Grain Size, Hardness and Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets Using Genetic Algorithm, J. Manuf. Sci. Prod., 2014, 12, p 181–189. https://doi.org/10.1515/jmsp-2012-001110.1515/jmsp-2012-0011 ↗
12. Nickel Nano Powder, (2022). https://www.alibaba.com/product-detail/Ni-Nickel-Nanoparticles-Nano-Nickel-Powder_62243045431.html. Accessed on April 11, 2022 at 06:39 PM (IST)
13. V. Handa, P. Goyal , and S. Sehgal, Development of Novel Experimental Procedure for Microwave Hybrid Heating Based Joining Using Graphite Rods, Mater. Today Proc., 2021, 45, p 5769–5771. https://doi.org/10.1016/j.matpr.2021.02.60110.1016/j.matpr.2021.02.601 ↗
14. L. Bagha, S. Sehgal, A. Thakur , and H. Kumar, Effects of Powder size of Interface Material on Selective Hybrid Carbon Microwave Joining of SS304–SS304, J. Manuf. Process., 2017, 25, p 290–295. https://doi.org/10.1016/j.jmapro.2016.12.01310.1016/j.jmapro.2016.12.013 ↗