Microstructure, Bio-corrosion Behavior, and Corrosion Residual Strength of High Strain Rate Rolled Mg-4Zn Alloy Sheet
Source abstract
Abstract
Microstructure, bio-corrosion behavior, and corrosion residual strength in 0.9 wt.% NaCl solution of the fine-grained Mg-4Zn alloy sheet prepared by high strain rate rolling are systematically investigated. The as-rolled alloy has fine homogenous dynamic recrystallization grains with the average grain size of 4.5 μm. It has different bio-corrosion behavior from the as-cast and is the most corrosion resistant except for pure Mg. Its in vitro strength loss is about 19% after 7 days immersion (the as-cast, 62%), and corrosion residual strength after 15 days immersion is 205 MPa. Its in vitro strength loss after 15, 30, and 60 days immersion are 24, 37, and 38% respectively. The as-rolled Mg-4Zn alloy is featured with the slighter in vitro loss of mechanical integrity due to uniform bio-corrosion and is desirable for the usage in the field of bone fixation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M.P. Staiger, A.M. Pietak, J. Huadmai, and G. Dias, Magnesium and Its Alloys as Orthopedic Biomaterials: A Review, Biomaterials, 2006, 27, p 1728–173410.1016/j.biomaterials.2005.10.003 ↗
2. L. Tan, X. Yu, P. Wan, and K. Yang, Biodegradable Materials for Bone Repairs: A Review, J. Mater. Sci. Technol., 2013, 29, p 503–51310.1016/j.jmst.2013.03.002 ↗
3. I. Popov, D. Starosvetsky, and D. Shechtman, Initial Stages of Corrosion Within Mg-Zn-Y-Zr Alloy in 1g/l NaCl Solution, J. Mater. Sci., 2000, 35, p 1–810.1023/A:1004734725783 ↗
4. G. Song, Control of Biodegradation of Biocompatible Magnesium Alloys, Corros. Sci., 2007, 49, p 1696–170110.1016/j.corsci.2007.01.001 ↗
5. M.B. Kannan and R.K.S. Raman, In Vitro Degradation and Mechanical Integrity of Calcium-Containing Magnesium Alloys in Modified-Simulated Body Fluid, Biomaterials, 2008, 29, p 2306–231410.1016/j.biomaterials.2008.02.003 ↗
6. H. Li, Q.M. Peng, X.J. Li, K. Li, Z.S. Han, and D.Q. Fang, Microstructures, Mechanical and Cytocompatibility of Degradable Mg-Zn Based Orthopedic Biomaterials, Mater. Design, 2014, 58, p 43–5110.1016/j.matdes.2014.01.031 ↗
7. J. Kubásek, D. Vojtěch, J. Lipov, and T. Ruml, Structure, Mechanical Properties, Corrosion Behavior and Cytotoxicity of Biodegradable Mg-X (X=Sn, Ga, In) Alloys, Mater. Sci. Eng. C, 2013, 33, p 2421–243210.1016/j.msec.2013.02.005 ↗
8. F. Rosalbino, S. De Negri, A. Saccone, E. Angelini, and S. Delfino, Bio-corrosion Characterization of Mg-Zn-X(X=Ca, Mn, Si) Alloys for Biomedical Applications, J. Mater. Sci., 2010, 21, p 1091–1098
9. W.W. He, E.L. Zhang, and K. Yang, Effect of Y on the Bio-corrosion Behavior of Extruded Mg-Zn-Mn Alloy in Hank’s Solution, Mater. Sci. Eng. C, 2010, 10, p 167–17410.1016/j.msec.2009.09.014 ↗
10. S.X. Zhang, J.N. Li, Y. Song, C.L. Zhao, X.N. Zhang, C.Y. Xie, Y. Zhang, H.R. Tao, Y.H. He, Y. Jiang, and Y.J. Bian, In Vitro Degradation, Hemolysis and MC3T3-E1 Cell Adhesion of Biodegradable Mg-Zn Alloy, Mater. Sci. Eng. C, 2009, 29, p 1907–191210.1016/j.msec.2009.03.001 ↗
11. B.P. Zhang. Research on Mg-Zn-Ca Alloys as Degradable Materials, Doctor Thesis, Harbin University of Technology, 2010.10.5772/23929 ↗
12. Y.H. Gu, S. Bandopadhyay, C.F. Chen, C.Y. Ning, and Y.J. Guo, Long-Term Corrosion Inhibition Mechanism of Microarc Oxidation Coated AZ31 Mg Alloys for Biomedical Applications, Mater. Design, 2013, 46, p 66–7510.1016/j.matdes.2012.09.056 ↗
13. H. Zhao, S. Cai, S.X. Niu, R.Y. Zhang, X.D. Wu, G.H. Xu, and Z.T. Ding, The Influence of Alkali Pretreatments of AZ31 Magnesium Alloys on Bonding of Bioglass-Ceramic Coatings and Corrosion Resistance for Biomedical Applications, Ceram. Int., 2015, 41(3), p 4590–460010.1016/j.ceramint.2014.12.002 ↗
14. H.M. Wong, K.W.K. Yeung, K.O. Lam, V. Tam, P.K. Chu, K.D.K. Luk, and K.M.C. Cheung, A Biodegradable Polymer-Based Coating to Control the Performance of Magnesium Alloy Orthopaedic Implants, Biomaterials, 2010, 31, p 2084–209610.1016/j.biomaterials.2009.11.111 ↗
15. X.N. Gu, Y.F. Zheng, S.P. Zhong, T.F. Xi, J.Q. Wang, and W.H. Wang, Corrosion of, and Cellular Responses to Mg-Zn-Ca Bulk Metallic Glasses, Biomaterials, 2010, 31, p 1093–110310.1016/j.biomaterials.2009.11.015 ↗
16. B. Zberg, P.J. Uggowitzer, and J.F. Löffler, MgZnCa Glasses Without Clinically Observable Hydrogen Evolution for Biodegradable Implants, Nat. Mater., 2009, 8, p 887–89110.1038/nmat2542 ↗
17. H. Wang, Y. Estrin, and Z. Zúberová, Bio-corrosion of a Magnesium Alloy with Different Processing Histories, Mater. Lett., 2008, 62, p 2476–247910.1016/j.matlet.2007.12.052 ↗
18. S. Koleini, M.H. Idris, and H. Jafari, Influence of Hot Rolling Parameters on Microstructure and Biodegradability of Mg-1Ca Alloy in Simulated Body Fluid, Mater. Design, 2012, 33, p 20–2510.1016/j.matdes.2011.06.063 ↗
19. Z. Wei, S. Tian, and N.N. Aung, Effect of Heat Treatment on Corrosion Behaviour of Magnesium Alloy AZ91D in Simulated Body Fluid, Corros. Sci., 2010, 52, p 1035–104110.1016/j.corsci.2009.11.030 ↗
20. M. Alvarez-Lopez, M.D. Pereda, J.A. del Valle, M. Fernandez-Lorenzo, M.C. Garcia-Alonso, O.A. Ruano, and M.L. Escudero, Corrosion Behaviour of AZ31 Magnesium Alloy with Different Grain Sizes in Simulated Biological Fluids, Acta Biomater., 2010, 6, p 1763–177110.1016/j.actbio.2009.04.041 ↗
21. Z.W. Ren, S.K. Guan, Y.F. Sun, et al. Microstructure and Properties of Biomagnesium Alloy by High Pressure Torsion, The 12th Chinese Conference on Biomaterials, December 4-7, 2009, China, E-23
22. J. Fan, X. Qiu, X.D. Niu, Z. Tian, W. Sun, X.J. Liu, Y.D. Li, W.R. Li, and J. Meng, Microstructure, Mechanical Properties, In Vitro Degradation and Cytotoxicity Evaluations of Mg-1.5Y-1.2Zn-0.44Zr Alloys for Biodegradable Metallic Implants, Mater. Sci. Eng. C, 2013, 33, p 2345–235210.1016/j.msec.2013.01.063 ↗
23. G.B. Hamu, D. Eliezer, and L. Wagner, The Relation Between Severe Plastic Deformation Microstructure and Corrosion Behavior of AZ31 Magnesium Alloy, J. Alloys Compd., 2009, 468, p 222–22910.1016/j.jallcom.2008.01.084 ↗
24. S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, J.Z. Liu, and J. Tian, Effect of Twinning and Dynamic Recrystallization on the High Strain Rate Rolling Process, Scr. Mater., 2010, 63(10), p 985–98810.1016/j.scriptamat.2010.07.029 ↗
25. S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, B. Su, Y.G. Du, and X.Z. Liao, Feasibility of High Strain-Rate Rolling of a Magnesium Alloy Across a Wide Temperature Range, Scr. Mater., 2012, 67, p 404–40710.1016/j.scriptamat.2012.05.036 ↗
26. S.Q. Zhu, H.G. Yan, J.H. Chen, Y.Z. Wu, Y.G. Du, and X.Z. Liao, Fabrication of Mg-Al-Zn-Mn Alloy Sheets with Homogeneous Fine-Grained Structures Using High Strain-Rate Rolling in a Wide Temperature Range, Mater. Sci. Eng. A, 2013, 559(1), p 765–772
27. M. Erinc, W. Sillekens, Magnesium Technology 2009, E.A. Nyberg, S.R. Agnew, N.R. Neelameggham, et al, Eds., Springer, Hamburg, 2009, p 209-214.
28. M.T. Pérez-Prado, J.A. del Valle, and O.A. Ruano, Achieving High Strength in Commercial Mg Cast Alloys Through Large Strain Rolling, Mater. Lett., 2005, 59, p 3299–330310.1016/j.matlet.2005.04.061 ↗
29. K. Kubota, M. Mabuchi, and K. Higashi, Review Processing and Mechanical Properties of Fine-Grained Magnesium Alloys, J. Mater. Sci., 1999, 34, p 2255–226210.1023/A:1004561205627 ↗
30. G.Q. Li, G.H. Wu, Y. Fan, and W.J. Ding, Effect of the Main Alloying Elements on Microstructure and Corrosion Resistance of Magnesium Alloys, Foundry Technol., 2006, 27(1), p 81–82. (in Chinese)
31. Y.W. Song, E.H. Han, D.Y. Shan, C.D. Yim, and B.S. You, The Effect of Zn Concentration on the Corrosion Behavior of Mg-xZn Alloys, Corros. Sci., 2012, 65, p 322–33010.1016/j.corsci.2012.08.037 ↗
32. N.N. Aung and W. Zhou, Effect of Grain Size and Twins on Corrosion Behaviour of AZ31B Magnesium Alloy, Corros. Sci., 2010, 52, p 589–59410.1016/j.corsci.2009.10.018 ↗
33. E. Koç, M.B. Kannan, M. Ünal, and E. Candan, Influence of Zinc on the Microstructure, Mechanical Properties and In Vitro Corrosion Behavior of Magnesium–Zinc Binary Alloys, J. Alloys Compd., 2015, 648, p 291–29610.1016/j.jallcom.2015.06.227 ↗
34. J.S. Liao, M. Hotta, and N. Yamamoto, Corrosion Behavior of Fine-Grained AZ31B Magnesium Alloy, Corros. Sci., 2012, 61, p 208–21410.1016/j.corsci.2012.04.039 ↗
35. Q. Wang, Y.H. Liu, X.Y. Zhu, S. Li, S. Yu, L. Zhang, and Y.L. Song, Study on the Effect of Corrosion on the Tensile Properties of the 1.0 wt.% Yttrium Modified AZ91 Magnesium Alloy, Mater. Sci. Eng. A, 2009, 517(1), p 239–24510.1016/j.msea.2009.03.053 ↗