Understanding the Mechanism of Stress Corrosion Cracking Resistance in Stainless Steel Welds Subjected to Laser Shock Peening without Coating for Nuclear Canister Applications
Source abstract
Abstract
The stainless-steel weld joints of dry storage canisters (DSC) used for storing spent nuclear fuel are highly susceptible to stress corrosion cracking (SCC). This is a serious safety concern in the nuclear industry as it releases nuclear radiation from interim storage locations. To mitigate this issue, the present study utilizes laser shock peening without protective coating (LSPwC) on austenitic stainless steel (ASS) weld joints. LSPwC is performed on the ASS weld joints with two intensities (7 and 9 GW/cm2) and two overlap ratios (30 and 50%). The results showed that LSPwC induced high magnitude and in-depth residual compressive stress (RCS), work-hardened layer, and plastic strain in the weld joints. The remarkable enhancement in SCC resistance of LSPwC’ed ASS weld joints can be attributed to grain refinement and RCS. The underlying mechanism of improved SCC resistance of the LSPwC’ed ASS weld joints was elucidated using x-ray diffraction (XRD) and scanning electron microscope. These findings demonstrate that LSPwC is a viable surface modification technique to mitigate the SCC in DSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. US Nuclear Regulatory Commission, Identification and Prioritization of the Technical Information Needs Affecting Potential Regulation of Extended Storage and Transportation of Spent Nuclear Fuel, White Paper ML14043A402, US Nuclear Regulatory Commission, Washington, 2014.
2. J.D. Werner, US Spent Nuclear Fuel Storage, Congressional Research Service Washington, DC, 2012.
3. Q. Lu, Q. Su, F. Wang, C. Zhang, Y. Lu, M. Nastasi, and B. Cui, Influence of Laser Shock Peening on Irradiation Defects in Austenitic Stainless Steels, J. Nucl. Mater., 2017, 489, p 203–210.10.1016/j.jnucmat.2017.03.046 ↗
4. J. Yao, Z. Qi, and C. Dong, Real-Time Evolution and Characterization of Passive Films on Individual Ferrite and Austenite Phases of Duplex Stainless Steel, Electrochem. Commun., 2022, 137, p 107265.10.1016/j.elecom.2022.107265 ↗
5. Y. Zhang, H. Luo, Q. Zhong, H. Yu, and J. Lv, Characterization of Passive Films Formed on As-Received and Sensitized AISI 304 Stainless Steel, Chin. J. Mech. Eng., 2019, 32(1), p 27.10.1186/s10033-019-0336-8 ↗
6. L. Zhiming, S. Laimin, Z. Shenjin, T. Zhidong, and J. Yazhou, Effect of High Energy Shot Peening Pressure on the Stress Corrosion Cracking of the Weld Joint of 304 Austenitic Stainless Steel, Mater. Sci. Eng. A, 2015, 637, p 170–174.10.1016/j.msea.2015.03.088 ↗
7. K. Fukuya, Current Understanding of Radiation-Induced Degradation in Light Water Reactor Structural Materials, J. Nucl. Sci. Technol., 2013, 50(3), p 213–254.10.1080/00223131.2013.772448 ↗
8. NRC Information Notice 2012-20: Potential Chloride-Induced Stress Corrosion Cracking of Austenitic Stainless Steel and Maintenance of Dry Cask Storage System Canisters., n.d.
9. O.M. Alyousif and R. Nishimura, The Stress Corrosion Cracking Behavior of Austenitic Stainless Steels in Boiling Magnesium Chloride Solutions, Corros. Sci., 2007, 49(7), p 3040–3051.10.1016/j.corsci.2006.12.023 ↗
10. A.K. Perka, M. John, U.B. Kuruveri, and P.L. Menezes, Advanced High-Strength Steels for Automotive Applications: Arc and Laser Welding Process, Properties, and Challenges, Metals, 2022, 12(6), p 1051.10.3390/met12061051 ↗
11. M. John, O. Diaz, A. Esparza, A. Fliegler, D. Ocenosak, C. Van Dorn, U.K. Bhat, and P.L. Menezes, Welding Techniques for High Entropy Alloys: Processes, Properties, Characterization, and Challenges, Materials, 2022, 15(6), p 2273.10.3390/ma15062273 ↗
12. J. Tani, M. Mayuzumi, and N. Hara, Stress Corrosion Cracking of Stainless-Steel Canister for Concrete Cask Storage of Spent Fuel, J. Nucl. Mater., 2008, 379(1–3), p 42–47.10.1016/j.jnucmat.2008.06.005 ↗
13. H.F. López, M.M. Cisneros, H. Mancha, O. García, and M.J. Pérez, Grain Size Effects on the SCC Susceptibility of a Nitrogen Steel in Hot NaCl Solutions, Corros. Sci., 2006, 48(4), p 913–924.10.1016/j.corsci.2005.02.017 ↗
14. M. John, U.B. Kuruveri, and P.L. Menezes, Laser Cladding-Based Surface Modification of Carbon Steel and High-Alloy Steel for Extreme Condition Applications, Coatings, 2022, 12(10), p 1444.10.3390/coatings12101444 ↗
15. K.U. Bhat, D.B. Panemangalore, S.B. Kuruveri, M. John, and P.L. Menezes, Surface Modification of 6 Series Aluminum Alloys, Coatings., 2022, 12(2), p 180.10.3390/coatings12020180 ↗
16. M. John, A.M. Ralls, S.C. Dooley, A.K.V. Thazhathidathil, A.K. Perka, U.B. Kuruveri, and P.L. Menezes, Ultrasonic Surface Rolling Process: Properties, Characterization, and Applications, Appl. Sci., 2021, 11(22), p 10986.10.3390/app112210986 ↗
17. A. Kishore, M. John, A.M. Ralls, S.A. Jose, U.B. Kuruveri, and P.L. Menezes, Ultrasonic Nanocrystal Surface Modification: Processes, Characterization, Properties, and Applications, Nanomaterials, 2022, 12(9), p 1415.10.3390/nano12091415 ↗
18. X. Pan, X. Wang, Z. Tian, W. He, X. Shi, P. Chen, and L. Zhou, Effect of Dynamic Recrystallization on Texture Orientation and Grain Refinement of Ti6Al4V Titanium Alloy Subjected to Laser Shock Peening, J. Alloy. Compd., 2021, 850, p 156672.10.1016/j.jallcom.2020.156672 ↗
19. Y.-R. Yoo, S.-H. Choi, and Y.-S. Kim, Effect of Laser Shock Peening on the Stress Corrosion Cracking of 304L Stainless Steel, Metals, 2023, 13(3), p 516.10.3390/met13030516 ↗
20. M. John, P.R. Kalvala, M. Misra, and P.L. Menezes, Peening Techniques for Surface Modification: Processes, Propert. Appl. Mater. Multidiscipl. Dig. Publ. Inst., 2021, 14(14), p 3841.
21. M. John, A.M. Ralls, U.B. Kuruveri, and P.L. Menezes, Tribological, Corrosion, and Microstructural Features of Laser-Shock-Peened Steels, Metals, 2023, 13(2), p 397.10.3390/met13020397 ↗
22. Z. Zhou, S. Bhamare, G. Ramakrishnan, S.R. Mannava, K. Langer, Y. Wen, D. Qian, and V.K. Vasudevan, Thermal Relaxation of Residual Stress in Laser Shock Peened Ti-6Al-4V Alloy, Surf. Coat. Technol., 2012, 206(22), p 4619–4627.10.1016/j.surfcoat.2012.05.022 ↗
23. P. Peyre and R. Fabbro, Laser Shock Processing: A Review of the Physics and Applications, Opt. Quant. Electron., 1995, 27(12), p 1213–1229.10.1007/BF00326477 ↗
24. A.H. Clauer and B.P. Fairand, Interaction of Laser-Induced Stress Waves with Metals. In: Proceeding ASM Conference Applications of Lasers in Materials Processing, 1979
25. I. Yakimets, C. Richard, G. Béranger, and P. Peyre, Laser Peening Processing Effect on Mechanical and Tribological Properties of Rolling Steel 100Cr6, Wear, 2004, 256(3), p 311–320.10.1016/S0043-1648(03)00405-8 ↗
26. R. Zhang, X. Hou, X. Zhou, H. Gao, S. Mankoci, H. Qin, Z. Ren, G.L. Doll, A. Martini, Y. Dong, N. Sahai, and C. Ye, Effects of Laser Shock Peening on the Wear and Degradation Behaviors of Magnesium Alloys, Am. Soc. of Mech. Eng. Dig. Collect., 2016 https://doi.org/10.1115/MSEC2016-868910.1115/MSEC2016-8689 ↗
27. P. Peyre, R. Fabbro, P. Merrien, and H.P. Lieurade, Laser Shock Processing of Aluminium Alloys, Appl. High Cycle Fatigue Beha. Mater. Sci. Eng. A, 1996, 210(1), p 102–113.
28. Y. Sano, M. Obata, T. Kubo, N. Mukai, M. Yoda, K. Masaki, and Y. Ochi, Retardation of Crack Initiation and Growth in Austenitic Stainless Steels by Laser Peening without Protective Coating, Mater. Sci. Eng., A, 2006, 417(1–2), p 334–340.10.1016/j.msea.2005.11.017 ↗
29. L. Zhang, Y.K. Zhang, J.Z. Lu, F.Z. Dai, A.X. Feng, K.Y. Luo, J.S. Zhong, Q.W. Wang, M. Luo, and H. Qi, Effects of Laser Shock Processing on Electrochemical Corrosion Resistance of ANSI 304 Stainless Steel Weldments after Cavitation Erosion, Corros. Sci., 2013, 66, p 5–13.10.1016/j.corsci.2012.08.034 ↗
30. G. Brandal and Y. Lawrence Yao, Material Influence on Mitigation of Stress Corrosion Cracking Via Laser Shock Peening, J. Manuf. Sci. Eng., 2017, 139(1), p 011002.10.1115/1.4034283 ↗
31. C. Cheung, U. Erb, and G. Palumbo, Application of Grain Boundary Engineering Concepts to Alleviate Intergranular Cracking in Alloys 600 and 690, Mater. Sci. Eng. A, 1994, 185(1–2), p 39–43.10.1016/0921-5093(94)90925-3 ↗
32. P. Yella, P. Venkateswarlu, R.K. Buddu, N. Ravi, K.B.S. Rao, P.P. Kiran, and K.V. Rajulapati, Role of Sacrificial Layers on Surface Characteristics of Laser Shock Peened SS304 Plates, Opt. Laser Technol., 2018, 107, p 142–149.10.1016/j.optlastec.2018.05.018 ↗
33. P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre, and D. Stuart, Influence of Thermal and Mechanical Surface Modifications Induced by Laser Shock Processing on the Initiation of Corrosion Pits in 316L Stainless Steel, J. Mater. Sci., 2007, 42(16), p 6866–6877.10.1007/s10853-007-1502-4 ↗
34. S. Kalainathan, S. Sathyajith, and S. Swaroop, Effect of Laser Shot Peening without Coating on the Surface Properties and Corrosion Behavior of 316L Steel, Opt. Lasers Eng., 2012, 50(12), p 1740–1745.10.1016/j.optlaseng.2012.07.007 ↗
35. Y. Zhang, J. You, J. Lu, C. Cui, Y. Jiang, and X. Ren, Effects of Laser Shock Processing on Stress Corrosion Cracking Susceptibility of AZ31B Magnesium Alloy, Surf. Coat. Technol., 2010, 204(24), p 3947–3953.10.1016/j.surfcoat.2010.03.015 ↗
36. Z. Wan, W. Dai, W. Guo, Q. Jia, H. Zhang, J. Xue, L. Lin, and P. Peng, Improved Corrosion Resistance of Ni-Base Alloy 600 Welded Joint by Laser Shock Peening, J. Manuf. Process., 2022, 80, p 718–728.10.1016/j.jmapro.2022.05.061 ↗
37. Z. Lu, F. Xu, C. Tang, Y. Cui, H. Xu, and J. Mao, Stress Corrosion Cracking Susceptibility of 304 Stainless Steel Subjected to Laser Shock Peening without Coating, J. Mater. Eng. Perform., 2021, 30(10), p 7163–7170.10.1007/s11665-021-05898-8 ↗
38. S. Prabhakaran, A. Kulkarni, G. Vasanth, S. Kalainathan, P. Shukla, and V.K. Vasudevan, Laser Shock Peening without Coating Induced Residual Stress Distribution, Wettability Characteristics and Enhanced Pitting Corrosion Resistance of Austenitic Stainless Steel, Appl. Surf. Sci., 2018, 428, p 17–30.10.1016/j.apsusc.2017.09.138 ↗
39. M.V. Nataraj and S. Swaroop, Effect of Laser Peening without Coating on Mechanical and Microstructural Behaviour of SS 304 Stainless Steel, Mater. Today Commun., 2022, 33, p 104200.10.1016/j.mtcomm.2022.104200 ↗
40. K. Praveenkumar, S. Swaroop, and G. Manivasagam, Residual Stress Distribution, Phase Transformation, and Wettability Characteristics of Laser Peened Austenitic Stainless Steel, J. of Materi Eng and Perform, 2022, 31(8), p 6846–6857.10.1007/s11665-022-06748-x ↗
41. J.-E. Masse and G. Barreau, Laser Generation of Stress Waves in Metal, Surface Coat. Technol., 1995, 70(2–3), p 231–234.10.1016/0257-8972(95)80020-4 ↗
42. M. Banaszkiewicz and A. Rehmus-Forc, Stress Corrosion Cracking of a 60MW Steam Turbine Rotor, Eng. Fail. Anal., 2015, 51, p 55–68.10.1016/j.engfailanal.2015.02.015 ↗
43. M. John, A.M. Ralls, M. Misra, and P.L. Menezes, Effect of Ultrasonic Impact Peening on Stress Corrosion Cracking Resistance of Austenitic Stainless-Steel Welds for Nuclear Canister Applications, J. Nucl. Mater., 2023, 584, p 154590.10.1016/j.jnucmat.2023.154590 ↗
44. B.N. Mordyuk, Yu.V. Milman, M.O. Iefimov, G.I. Prokopenko, V.V. Silberschmidt, M.I. Danylenko, and A.V. Kotko, Characterization of Ultrasonically Peened and Laser-Shock Peened Surface Layers of AISI 321 Stainless Steel, Surf. Coat. Technol., 2008, 202(19), p 4875–4883.10.1016/j.surfcoat.2008.04.080 ↗
45. C. Montross, Laser Shock Processing and Its Effects on Microstructure and Properties of Metal Alloys: A Review, Int. J. Fatigue, 2002, 24(10), p 1021–1036.10.1016/S0142-1123(02)00022-1 ↗
46. Y. Sano, Laser Peening without Coating as a Surface Enhancement Technology, JLMN, 2006, 1(3), p 161–166.10.2961/jlmn.2006.03.0002 ↗
47. W. Wang, M. Kattoura, S. Bovid, Z. Zhang, D. Lahrman, and W. Cai, Effects of Nanosecond Laser Shock Peening on Residual Stress, Corrosion and Tribocorrosion Behavior of WE43 Magnesium Alloys, Wear, 2023, 524–525, p 204866.10.1016/j.wear.2023.204866 ↗
48. ASTM G36-94, Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution, ASTM International West Conshohocken, PA, USA, (2013)
49. G01 Committee, Practice for Making and Using U-Bend Stress-Corrosion Test Specimens. ASTM International, n.d., doi:https://doi.org/10.1520/G0030-97R1610.1520/G0030-97R16 ↗
50. C.X. Huang, G. Yang, Y.L. Gao, S.D. Wu, and S.X. Li, Investigation on the Nucleation Mechanism of Deformation-Induced Martensite in an Austenitic Stainless Steel under Severe Plastic Deformation, J. Mater. Res., 2007, 22(3), p 724–729.10.1557/jmr.2007.0094 ↗
51. K.Y. Luo, J.Z. Lu, Y.K. Zhang, J.Z. Zhou, L.F. Zhang, F.Z. Dai, L. Zhang, J.W. Zhong, and C.Y. Cui, Effects of Laser Shock Processing on Mechanical Properties and Micro-Structure of ANSI 304 Austenitic Stainless Steel, Mater. Sci. Eng. A, 2011, 528(13), p 4783–4788.10.1016/j.msea.2011.03.041 ↗
52. I. Nikitin, B. Scholtes, H.J. Maier, and I. Altenberger, High Temperature Fatigue Behavior and Residual Stress Stability of Laser-Shock Peened and Deep Rolled Austenitic Steel AISI 304, Scripta Mater., 2004, 50(10), p 1345–1350.10.1016/j.scriptamat.2004.02.012 ↗
53. G. Fargas, J.J. Roa, and A. Mateo, Effect of Shot Peening on Metastable Austenitic Stainless Steels, Mater. Sci. Eng., A, 2015, 641, p 290–296.10.1016/j.msea.2015.05.079 ↗
54. G. Ranjith Kumar, G. Rajyalakshmi, S. Swaroop, S. Arul, X. Stango, and U. Vijayalakshmi, Laser Shock Peening Wavelength Conditions for Enhancing Corrosion Behaviour of Titanium Alloy in Chloride Environment, J Braz. Soc. Mech. Sci. Eng., 2019, 41(3), p 129.10.1007/s40430-019-1633-y ↗
55. A. Ravisankar, S.K. Velaga, G. Rajput, and S. Venugopal, Influence of Welding Speed and Power on Residual Stress during Gas Tungsten Arc Welding (GTAW) of Thin Sections with Constant Heat Input: A Study Using Numerical Simulation and Experimental Validation, J. Manuf. Process., 2014, 16(2), p 200–211.10.1016/j.jmapro.2013.11.002 ↗
56. C. Samuel, A. Moganraj, S. Swaroop, K. Praveenkumar, A. Natarajan, M. Nageshwara Rao, B. Syed, and B. Bhattacharya, Effect of Laser Shock Peening without Coating on Grain Size and Residual Stress Distribution in a Microalloyed Steel Grade, Crystals, 2023, 13(2), p 212.10.3390/cryst13020212 ↗
57. A. Gujba and M. Medraj, Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening, Materials, 2014, 7(12), p 7925–7974.10.3390/ma7127925 ↗
58. J.Z. Lu, K.Y. Luo, D.K. Yang, X.N. Cheng, J.L. Hu, F.Z. Dai, H. Qi, L. Zhang, J.S. Zhong, Q.W. Wang, and Y.K. Zhang, Effects of Laser Peening on Stress Corrosion Cracking (SCC) of ANSI 304 Austenitic Stainless Steel, Corros. Sci., 2012, 60, p 145–152.10.1016/j.corsci.2012.03.044 ↗
59. X.L. Wei and X. Ling, Numerical Modeling of Residual Stress Induced by Laser Shock Processing, Appl. Surf. Sci., 2014, 301, p 557–563.10.1016/j.apsusc.2014.02.128 ↗
60. H. Kovacı, İ Hacısalihoğlu, A.F. Yetim, and A. Çelik, Effects of Shot Peening Pre-Treatment and Plasma Nitriding Parameters on the Structural, Mechanical and Tribological Properties of AISI 4140 Low-Alloy Steel, Surf. Coat. Technol., 2019, 358, p 256–265.10.1016/j.surfcoat.2018.11.043 ↗
61. A. Di Schino and J.M. Kenny, Grain Size Dependence of the Fatigue Behaviour of a Ultrafine-Grained AISI 304 Stainless Steel, Mater. Lett., 2003, 57(21), p 3182–3185.10.1016/S0167-577X(03)00021-1 ↗
62. A. Yazdanpanah, M. Lago, C. Gennari, and M. Dabalà, Stress Corrosion Cracking Probability of Selective Laser Melted 316L Austenitic Stainless Steel under the Effect of Grinding Induced Residual Stresses, Metals, 2021, 11(2), p 327.10.3390/met11020327 ↗
63. J. Frankel, A. Abbate, and W. Scholz, The Effect of Residual Stresses on Hardness Measurements, Exp. Mech., 1993, 33(2), p 164–168.10.1007/BF02322494 ↗
64. S. Pal, S.S. Bhadauria, and P. Kumar, Studies on Stress Corrosion Cracking of F304 Stainless Steel in Boiling Magnesium Chloride Solution, J. Bio. Tribo. Corros., 2021, 7(2), p 62.10.1007/s40735-021-00498-4 ↗
65. B.T. Lu, Z.K. Chen, J.L. Luo, B.M. Patchett, and Z.H. Xu, Pitting and Stress Corrosion Cracking Behavior in Welded Austenitic Stainless Steel, Electrochim. Acta, 2005, 50(6), p 1391–1403.10.1016/j.electacta.2004.08.036 ↗
66. S. Rahimi and T.J. Marrow, A New Method for Predicting Susceptibility of Austenitic Stainless Steels to Intergranular Stress Corrosion Cracking, Mater. Des., 2020, 187, p 108368.10.1016/j.matdes.2019.108368 ↗
67. L.J. Qiao, K.W. Gao, A.A. Volinsky and X.Y. Li, Discontinuous Surface Cracks during Stress Corrosion Cracking of Stainless Steel Single Crystal, Corros. Sci., 2011, 53(11), p 3509–3514.10.1016/j.corsci.2011.06.019 ↗
68. J. Tani, M. Mayuzumi, T. Arai, and N. Hara, Stress Corrosion Cracking Growth Rates of Candidate Canister Materials for Spent Nuclear Fuel Storage in Chloride-Containing Atmosphere, Mater. Trans., 2007, 48(6), p 1431–1437.10.2320/matertrans.MRA2006367 ↗
69. N. Porter, D. Brooks, C. Bryan, R. Katona, and R. Schaller, FY21 Status Report: Probabilistic SCC Model for SNF Dry Storage Canisters. 2021, p SAND2021-9213R, 1822281: 700148, doi:https://doi.org/10.2172/1822281.10.2172/1822281 ↗
70. P.C.-S. Chen, T. Shinohara, and S. Tsujikawa, Applicability of the Competition Concept in Determining the Stress Corrosion Cracking Behavior of Austenitic Stainless Steels in Chloride Solutions, Corros. Eng., 1997, 46(5), p 313–320.10.3323/jcorr1991.46.313 ↗
71. A. Turnbull, K. Mingard, J.D. Lord, B. Roebuck, D.R. Tice, K.J. Mottershead, N.D. Fairweather, and A.K. Bradbury, Sensitivity of Stress Corrosion Cracking of Stainless Steel to Surface Machining and Grinding Procedure, Corros. Sci., 2011, 53(10), p 3398–3415.10.1016/j.corsci.2011.06.020 ↗
72. A.S. Gill, A. Telang, and V.K. Vasudevan, Characteristics of Surface Layers Formed on Inconel 718 by Laser Shock Peening with and without a Protective Coating, J. Mater. Process. Technol., 2015, 225, p 463–472.10.1016/j.jmatprotec.2015.06.026 ↗
73. H. Luong and M.R. Hill, The Effects of Laser Peening on High-Cycle Fatigue in 7085–T7651 Aluminum Alloy, Mater. Sci. Eng., A, 2008, 477(1–2), p 208–216.10.1016/j.msea.2007.05.024 ↗
74. S. Gencalp Irizalp, B.K. Koroglu, and D. Sokol, Influence of Laser Peening With and Without Coating on the Surface Properties and Stress Corrosion Cracking Behavior of Laser-Welded 304 Stainless Steel, Metall. Mater. Trans. A, 2021, 52(8), p 3302–3316.10.1007/s11661-021-06294-6 ↗
75. O. Takakuwa and H. Soyama, Effect of Residual Stress on the Corrosion Behavior of Austenitic Stainless Steel, ACES, 2015, 05(01), p 62–71.10.4236/aces.2015.51007 ↗
76. H. Lee, D. Kim, J. Jung, Y. Pyoun, and K. Shin, Influence of Peening on the Corrosion Properties of AISI 304 Stainless Steel, Corros. Sci., 2009, 51(12), p 2826–2830.10.1016/j.corsci.2009.08.008 ↗
77. F. Dai, J. Zhou, J. Lu, and X. Luo, A Technique to Decrease Surface Roughness in Overlapping Laser Shock Peening, Appl. Surf. Sci., 2016, 370, p 501–507.10.1016/j.apsusc.2016.02.138 ↗
78. B. Mao, A. Siddaiah, P.L. Menezes, and Y. Liao, Surface Texturing by Indirect Laser Shock Surface Patterning for Manipulated Friction Coefficient, J. Mater. Process. Technol., 2018, 257, p 227–233.10.1016/j.jmatprotec.2018.02.041 ↗
79. S.P. Kumar and P.D. Babu, Effect of Laser Energy Density on Surface Morphology, Microstructure and Mechanical Behaviour of Direct Metal Laser Melted 17–4 PH Stainless Steel, Int. J. Mater. Res., 2023 https://doi.org/10.1515/ijmr-2022-024210.1515/ijmr-2022-0242 ↗
80. R.K. Gupta, B.K. Pant, V. Kain, R. Kaul, and K.S. Bindra, Laser Shock Peening and Its Applications: A Review, Lasers Manuf. Mater. Process., 2019, 6(4), p 424–463.10.1007/s40516-019-00098-8 ↗
81. Y. Li, Z. Ren, X. Jia, W. Yang, N. Nassreddin, Y. Dong, C. Ye, A. Fortunato, and X. Zhao, The Effects of the Confining Medium and Protective Layer during Femtosecond Laser Shock Peening, Manuf. Lett., 2021, 27, p 26–30.10.1016/j.mfglet.2020.11.006 ↗
82. C. Ye, S. Suslov, D. Lin, and G.J. Cheng, Deformation-Induced Martensite and Nanotwins by Cryogenic Laser Shock Peening of AISI 304 Stainless Steel and the Effects on Mechanical Properties, Phil. Mag., 2012, 92(11), p 1369–1389.10.1080/14786435.2011.645899 ↗
83. G. Muthukumaran, A.K. Rai, J. Gautam, P.D. Babu, K. Ranganathan, and K.S. Bindra, A Study on Effect of Multiple Laser Shock Peening on Microstructure, Residual Stress, and Mechanical Strength of 2.5 Ni-Cr-Mo (EN25) Low-Alloy Steel, J. Mater. Eng. Perform., 2023, 32(10), p 4361–4375.10.1007/s11665-022-07402-2 ↗
84. K. Hareharen, P. Kumar, T. Panneerselvam, D. Babu, and N. Sriraman, Investigating the Effect of Laser Shock Peening on the Wear Behaviour of Selective Laser Melted 316L Stainless Steel, Opt. Laser Technol., 2023, 162, p 109317.10.1016/j.optlastec.2023.109317 ↗