Effect of CeO2 on Microstructure and Wear Property of Laser Cladding Ni-Based Coatings Fabricated on 35CrMoV Steel
Source abstract
Abstract
The effects of CeO2 addition on the macro-morphology, surface cracks, microstructure, precipitated phases and wear property of laser cladding Ni-based coatings on 35CrMoV steel were investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscope (TEM), x-ray photoelectron spectroscopy (XPS) and friction and wear tester, respectively. The results indicated that the microstructure could be remarkably refined with the addition of CeO2. The width of eutectic structure is reduced from 1.74 μm to 237.5 nm with the amount of CeO2 increases from 0 to 4.0 wt.%. Meanwhile, CeO2 significantly decreases the number of the oxides and it can be obtained the minimal number of cracks when the CeO2 addition reaches 4.0 wt.%. The main phase composition of Ni60 cladding layer is Ni3Fe, Ni3V, Cr23C6 and Fe5C2. The distortional zone was observed around the eutectic of the coating. The average friction coefficient (0.438) and the wear resistance are the best when the addition of CeO2 is 4.0 wt.%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. G.Z. Zhang, H. Liu, X.H. Tian, P.J. Chen, H.F. Yang and J.B. Hao, Microstructure and Properties of AlCoCrFeNiSi High-Entropy Alloy Coating on AISI 304 Stainless Steel by Laser Cladding, J. Mater. Eng. Perform., 2020, 29, p 278–288. https://doi.org/10.1007/s11665-020-04586-310.1007/s11665-020-04586-3 ↗
2. B.C. Li, H.M. Zhu, C.J. Qiu and D.K. Zhang, Development of High Strength and Ductile Martensitic Stainless Steel Coatings with Nb Addition Fabricated by Laser Cladding, J. Alloys Compd., 2020, 832, 154985. https://doi.org/10.1016/j.jallcom.2020.15498510.1016/j.jallcom.2020.154985 ↗
3. J.L. Zhou and D.J. Kong, Microstructure, Tribological Performance, and Wear Mechanism of Cr and Mo-Reinforced FeSiB Coatings by Laser Cladding, J. Mater. Eng. Perform., 2020, 29(11), p 7428–7444. https://doi.org/10.1007/s11665-020-05187-w10.1007/s11665-020-05187-w ↗
4. F. Weng, H. Yu, C. Chen and J. Dai, Microstructures and Wear Properties of Laser Cladding Co-Based Composite Coatings on Ti-6Al-4V, Mater. Des., 2015, 80, p 174–181. https://doi.org/10.1016/j.matdes.2015.05.00510.1016/j.matdes.2015.05.005 ↗
5. D. Koclega, A. Radziszewska, S. Dymek, J. Morgiel, L. Maj and A. Kranzmann, Improvement of CORROSION Resistance of 13CrMo4-5 Steel by Ni-Based Laser Cladding Coatings, J. Mater. Eng. Perform., 2020, 29(6), p 3702–3713. https://doi.org/10.1007/s11665-020-04867-x10.1007/s11665-020-04867-x ↗
6. E. Fernández, M. Cadenas, R. González, C. Navas, R. Fernández and J. de Damborenea, Wear Behaviour of Laser Clad NiCrBSi Coating, Wear, 2005, 259, p 870–875. https://doi.org/10.1016/j.wear.2005.02.06310.1016/j.wear.2005.02.063 ↗
7. G.J. Li, J. Li and X. Luo, Effects of High Temperature Treatment on Microstructure and Mechanical Properties of Laser-Clad NiCrBSi/WC Coatings on Titanium Alloy Substrate, Mater. Charact., 2014, 98, p 83–92. https://doi.org/10.1016/j.matchar.2014.10.00310.1016/j.matchar.2014.10.003 ↗
8. I. Hemmati, J.C. Rao, V. Ocelík and J.T. De Hosson, Electron Microscopy Characterization of Ni-Cr-B-Si-C Laser Deposited Coatings, Microsc. Microanal., 2013, 19, p 120–131. https://doi.org/10.1017/S143192761201383910.1017/S1431927612013839 ↗
9. H. Yan, P.L. Zhang, Q.S. Gao, Y. Qin and R.D. Li, Laser Cladding Ni-Based Alloy/Nano-Ni Encapsulated h-BN Self-Lubricating Composite Coatings, Surf. Coat. Technol., 2017, 332, p 422–427. https://doi.org/10.1016/j.surfcoat.2017.06.07910.1016/j.surfcoat.2017.06.079 ↗
10. N. Zhao, L. Tao, H. Guo and M.Q. Zhang, Microstructure and Wear Resistance of Laser cladded Ni-Based Coatings with Nanometer La2O3 Addition, Rare. Metal Mater. Eng., 2017, 46, p 2092–2096. https://doi.org/10.1016/S1875-5372(17)30185-610.1016/S1875-5372(17)30185-6 ↗
11. R. Chen, Z. Wang, F. Zhu, H. Zhao, J. Qin and L. Zhong, Effects of Rare-Earth Micro-Alloying on Microstructures, Carbides, and Internal Friction of 51CrV4 Steels, J. Alloys Compd., 2020, 824, 153849. https://doi.org/10.1016/j.jallcom.2020.15384910.1016/j.jallcom.2020.153849 ↗
12. T.G. Zhang, H.Q. Xiao, Z.Q. Zhang, B. Yao and F. Yang, Effect of Y2O3 Addition on Microstructural Characteristics and Microhardness of Laser-Cladded Ti-6Al-4V Alloy Coating, J. Mater. Eng. Perform., 2020, 29(12), p 8221–8235. https://doi.org/10.1007/s11665-020-05316-510.1007/s11665-020-05316-5 ↗
13. S. Sun, H.G. Fu, X.L. Ping, X.Y. Guo, J. Lin, Y.P. Lei, W.B. Wu and J.X. Zhou, Technology, Effect of CeO2 Addition on Microstructure and Mechanical Properties of in-situ (Ti, Nb) C/Ni Coating, Surf. Coat. Technol., 2019, 359, p 300–313. https://doi.org/10.1016/j.surfcoat.2018.12.08310.1016/j.surfcoat.2018.12.083 ↗
14. M.M. Quazi, M.A. Fazal, A.S.M.A. Haseeb, F. Yusof, H.H. Masjuki and A. Arslan, Effect of Rare Earth Elements and their Oxides on Tribo-Mechanical Performance of Laser Claddings: A Review, J. Rare Earths, 2016, 6, p 549–564. https://doi.org/10.1016/S1002-0721(16)60061-310.1016/S1002-0721(16)60061-3 ↗
15. Y.N. Liu, R.L. Sun, N. Wei, T.G. Zhang and Y.W. Lei, Effects of CeO2 on Microstructure and Properties of TiC/Ti2Ni Reinforced Ti-Based Laser Cladding Composite Coatings, Opt. Lasers Eng., 2019, 120, p 84–94. https://doi.org/10.1016/j.optlaseng.2019.03.00110.1016/j.optlaseng.2019.03.001 ↗
16. M. Zhang, X.H. Wang, K.L. Qu and S.S. Liu, Effect of Rare Earth Oxide on Microstructure and high Temperature Oxidation Properties of Laser Cladding Coatings on 5CrNiMo Die Steel Substrate, Opt. Lasers Eng., 2019, 119, 105597. https://doi.org/10.1016/j.optlastec.2019.10559710.1016/j.optlastec.2019.105597 ↗
17. C.G. Wang, R.Y. Ma, Y.T. Zhou, Y. Liu, E.F. Daniel, X.F. Li, P. Wang, J.H. Dong and W. Ke, Effects of Rare Earth Modifying Inclusions on the Pitting Corrosion of 13Cr4Ni Martensitic Stainless Steel, J. Mater. Sci. Technol., 2021, 93, p 232–243. https://doi.org/10.1016/j.jmst.2021.03.01410.1016/j.jmst.2021.03.014 ↗
18. Z.T. Gao, H.B. Ren, Y. Yu, Z.M. Gao, E.Y. Liu and C.W. Zhang, Effect of CeO2 on the Microstructure and Microhardensss of Laser-Cladded Ni60 on 35CrMoV Alloys, Micron, 2021 https://doi.org/10.1016/j.micron.2021.10314610.1016/j.micron.2021.103146 ↗
19. H. Liu, P. Fu, H. Liu, Y. Cao, C. Sun, N. Du and D. Li, Effects of Rare Earth Elements on Microstructure Evolution and Mechanical Properties of 718H pre-Hardened Mold Steel, J. Mater. Sci. Technol., 2020, 50, p 245–256. https://doi.org/10.1016/j.jmst.2019.12.03510.1016/j.jmst.2019.12.035 ↗
20. C.L. Wang, Y. Gao, Z.C. Zeng and Y.K. Fu, Effect of Rare-Earth on Friction and Wear Properties of Laser Cladding Ni-Based Coatings on 6063Al, J. Alloys Compd., 2017, 727, p 278–285. https://doi.org/10.1016/j.jallcom.2017.08.10110.1016/j.jallcom.2017.08.101 ↗
21. B.L. Yin, Z.X. Wu and W.A. Curtin, Comprehensive First-Principles Study of Stable Stacking Faults in hcp Metals, Acta Mater., 2017, 123, p 223–234. https://doi.org/10.1016/j.actamat.2016.10.04210.1016/j.actamat.2016.10.042 ↗
22. K. Wei, L. Xiao, B. Gao, L. Li, Y. Liu, Z. Ding, W. Liu, H. Zhou and Y.H. Zhao, Enhancing the Strain Hardening and Ductility of Mg-Y Alloy by Introducing Stacking Faults, J. Magnes. Alloy., 2020, 8, p 1221–1227. https://doi.org/10.1016/j.jma.2019.09.01510.1016/j.jma.2019.09.015 ↗
23. X. Wei, X. Peng, X. Wang and Z. Dong, Development of Growth and Thermal Stresses in NiO Scale on Nanocrystalline Ni Without and with Dispersion of CeO2 Nanoparticles, Corros. Sci., 2017, 118, p 60–68. https://doi.org/10.1016/j.corsci.2017.01.01410.1016/j.corsci.2017.01.014 ↗
24. L. Liu, Q. Ding, Y. Zhong, J. Zou, J. Wu, Y.-L. Chiu, J. Li, Z. Zhang, Q. Yu and Z. Shen, Dislocation Network in Additive Manufactured Steel Breaks Strength–Ductility Trade-Off, Mater. Today, 2018, 21(4), p 354–361. https://doi.org/10.1016/j.mattod.2017.11.00410.1016/j.mattod.2017.11.004 ↗
25. Z.Y. Liu, D.D. Zhao, P. Wang, M. Yan, C. Yang, Z.W. Chen, J. Lu and Z.P. Lu, Additive Manufacturing of Metals: Microstructure Evolution and Multistage Control, J. Mater. Sci. Technol., 2022, 100, p 224–236. https://doi.org/10.1016/j.jmst.2021.06.01110.1016/j.jmst.2021.06.011 ↗
26. Z. Li, Q. Wang, A.A. Luo, J. Dai, H. Zou and L. Peng, Effect of Heat Treatment on Strain–Controlled Fatigue Behavior of Cast Mg–Nd–Zn–Zr Alloy, J. Mater. Sci. Technol., 2018, 34(11), p 2091–2099. https://doi.org/10.1016/j.jmst.2018.05.00110.1016/j.jmst.2018.05.001 ↗
27. Y.F. Guo, C.Y. Wang and Y.S. Wang, The Effect of Stacking Faults or Twin Formation on Crack Propagation in bcc Iron, Philos. Mag. Lett., 2004, 84(12), p 763–770. https://doi.org/10.1080/0950083050006157310.1080/09500830500061573 ↗
28. T. Yu, J. Chen, Y. Wen and Q. Deng, High Temperature Phase Stability and Wear Behavior of Laser Clad Ta Reinforced NiCrBSi Coating, Appl. Surf. Sci., 2021, 547, 149171. https://doi.org/10.1016/j.apsusc.2021.14917110.1016/j.apsusc.2021.149171 ↗
29. W.Y. Zhang, C.M. Wang, J.X. Ji, X.L. Feng, H.Z. Cui, Q. Song and C.Z. Zhang, Synthetic Effect of Cr and Mo Elements on Microstructure and Properties of Laser Cladding NiCrx Moy Alloy Coatings, Acta Metall. Sin. Engl., 2020, 33(10), p 1331–1345.10.1007/s40195-020-01081-5 ↗
30. H.B. Li and P. Zhao, Amorphous Ni–Co–Fe Hydroxide Nanospheres for the Highly Sensitive and Selective Non-Enzymatic Glucose Sensor Applications, J. Alloys Compd., 2019, 800, p 261–271. https://doi.org/10.1016/j.jallcom.2019.05.26410.1016/j.jallcom.2019.05.264 ↗
31. E.P. Domashevskaya, N.S. Builov, S.A. Ivkov, A.A. Guda, A.I. Chukavin and A.L. Trigub, XPS and XAS Investigations of Multilayer Nanostructures Based on the Amorphous CoFeB Alloy, J. Electron Spectros. Relat. Phenomena, 2020, 243, 146979. https://doi.org/10.1016/j.elspec.2020.14697910.1016/j.elspec.2020.146979 ↗
32. A. Loh, X. Li, O.O. Taiwo, F. Tariq, N.P. Brandon, P. Wang, K. Xu and B. Wang, Development of Ni–Fe Based Ternary Metal Hydroxides as Highly Efficient Oxygen Evolution Catalysts in AEM Water Electrolysis for Hydrogen Production, Int. J. Hydrog. Energy, 2020, 45(46), p 24232–24247. https://doi.org/10.1016/j.ijhydene.2020.06.25310.1016/j.ijhydene.2020.06.253 ↗
33. W. Zhou, K. Zhou, Y. Li, C. Deng and K. Zeng, High Temperature wear Performance of HVOF-Sprayed Cr3C2-WC-NiCoCrMo and Cr3C2-NiCr Hardmetal Coatings, Appl. Surf. Sci., 2017, 416, p 33–44. https://doi.org/10.1016/j.apsusc.2017.04.13210.1016/j.apsusc.2017.04.132 ↗
34. L.F. Hu, J. Li, Y.F. Tao and Y.H. Lv, Corrosion Behaviors of TiNi/Ti2Ni Matrix Coatings in the Environment Rich in Cl Ions, Surf. Coat. Technol., 2017, 311, p 295–306.10.1016/j.surfcoat.2017.01.020 ↗
35. C. Anandan and P. Bera, XPS Studies on the Interaction of CeO2 with Silicon in Magnetron Sputtered CeO2 Thin Films on Si and Si3N4 Substrates, Appl. Surf. Sci., 2013, 283, p 297–303. https://doi.org/10.1016/j.apsusc.2013.06.10410.1016/j.apsusc.2013.06.104 ↗