Optimization of Ultrasonic Impact Treatment for Surface Finishing and Hardening of AISI O2 Tool Steel by Experimental Design
Source abstract
Abstract
Advanced multi-pin ultrasonic impact treatment (UIT) technique is applied to improve the surface properties of AISI O2 tool steel. The main influential parameters, such as amplitude of the horn vibrations and peening intensity (UIT duration), were studied using a factorial design of experiments. The experimental conditions and response surface methodology designs were generated using the Design-Expert software. To optimize the UIT parameters for the manganese steel processing, statistical, diagnostic, and response surface methodology analyses were carried out. The effects of the UIT parameters on the surface crystallite/grain size, hardness, hardening depth, residual macro-stress, roughness, and waviness as response variables were evaluated. The surface topography and profiles of the untreated and UIT-processed specimens were also analyzed and compared. The linear/quadratic regression models were selected to predict the dependent output variables. The optimum UIT parameters were narrowed for the studied steel, setting maximum (hardness, hardening depth, and residual stress) and minimum (grain size, roughness, and waviness) limits. The results showed that the optimized UIT parameters lead to an increase in surface hardness by ~50% and a reduction in surface roughness by ~50%, providing both a specific surface texture and a nanostructure, and compressive residual stress in the subsurface layer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. H. Miyamoto, Corrosion of Ultrafine Grained Materials by Severe Plastic Deformation, an Overview, Mater. Trans., 2016, 57, p 559–572. https://doi.org/10.2320/matertrans.M201545210.2320/matertrans.M2015452 ↗
2. L. Trsko, O. Bokuvka, F. Novy and M. Guagliano, Effect of Severe Shot Peening on Ultra-High-Cycle Fatigue of a Low-Alloy Steel, Mater. Des., 2014, 27, p 103–113. https://doi.org/10.1016/j.matdes.2013.12.03510.1016/j.matdes.2013.12.035 ↗
3. N.M. Vaxevanidis, D. Manolakos, A. Koutsomichalis, G. Petropoulos, A. Panagotas, I. Sideris, A. Mourlas and S. Antoniou, The Effect of Shot Peening on Surface Integrity and Tribological Behaviour of Tool Steels, Int. Conf. Tribol. - AITC-AIT, 2006, 2006, p 1–8.
4. V.G. Efremenko, K. Shimizu, T. Noguchi, A.V. Efremenko and Y.G. Chabak, Impact-Abrasive-Corrosion Wear of Fe-Based Alloys: Influence of Microstructure and Chemical Composition Upon Wear Resistance, Wear, 2013, 305, p 155–165. https://doi.org/10.1016/j.wear.2013.06.00610.1016/j.wear.2013.06.006 ↗
5. I.B. Okipnyi, P.O. Maruschak, V.I. Zakiev and V.S. Mocharskyi, Fracture Mechanism Analysis of the Heat-Resistant Steel 15Kh2MFA(II) After Laser Shock-Wave Processing, J. Fail. Anal. and Preven., 2014, 14, p 668–674. https://doi.org/10.1007/s11668-014-9869-410.1007/s11668-014-9869-4 ↗
6. L. Petan, J.L. Ocaña and J. Grum, Effects of Laser Shock Peening on the Surface Integrity of 18% Ni Maraging Steel, Mech. Eng., 2016, 62, p 291–298. https://doi.org/10.5545/sv-jme.2015.330510.5545/sv-jme.2015.3305 ↗
7. D.A. Lesyk, H. Soyama, B.N. Mordyuk, V.V. Dzhemelinskyi, S. Martinez, N.I. Khripta and A. Lamikiz, Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure, J. Mater. Eng. Perform., 2019, 28, p 5307–5322. https://doi.org/10.1007/s11665-019-04273-y10.1007/s11665-019-04273-y ↗
8. H. Soyama, K. Sasaki, D. Odhiambo and M. Saka, Cavitation Shotless Peening for Surface Modification of Alloy Tool Steel, JSME Int. J. A-solid M., 2003, 46, p 398–402. https://doi.org/10.1299/jsmea.46.39810.1299/jsmea.46.398 ↗
9. C. Wang, C. Wang, L. Wang, Y. Lai, K. Li and Y. Zhou, A Dislocation Density–Based Comparative Study of Grain Refinement, Residual Stresses, and Surface Roughness Induced by Shot Peening and Surface Mechanical Attrition Treatment, Int. J. Adv. Manuf. Technol., 2020, 108, p 505–525. https://doi.org/10.1007/s00170-020-05413-810.1007/s00170-020-05413-8 ↗
10. J. Badreddine, E. Rouhaud, M. Micoulaut, S. Remy, V. Desfontaine and P. Renaud, 3D model of Shot Dynamics for Ultrasonic Shot Peening, Mater. Sci. Forum, 2014, 768–769, p 503–509. https://doi.org/10.4028/www.scientific.net/MSF.768-769.50310.4028/www.scientific.net/MSF.768-769.503 ↗
11. D.S. Bandla, P. Verma, K. Chattopadhyay and V. Singh, Enhancement of Hot Corrosion Resistance of Modified 9Cr-1Mo Steel Through Surface Nanostructuring and Pre-Oxidation, J. Mater. Eng. Perform., 2018, 27, p 6443–6457. https://doi.org/10.1007/s11665-018-3751-610.1007/s11665-018-3751-6 ↗
12. W. Na, Z. Tingting, Y. Sheng-qiang, L. Wenhui and Z. Kai, Experiment and Simulation Analysis on the Mechanism of the Spindle Barrel Finishing, Int. J. Adv. Manuf. Technol., 2020, 109, p 57–74. https://doi.org/10.1007/s00170-020-05609-y10.1007/s00170-020-05609-y ↗
13. V. Llaneza and F.J. Belzunce, Study of the Effects Produced by Shot Peening on the Surface of Quenched and Tempered Steels: Roughness, Residual Stresses and Work Hardening, Appl. Surf. Sci., 2015, 356, p 475–485. https://doi.org/10.1016/j.apsusc.2015.08.11010.1016/j.apsusc.2015.08.110 ↗
14. Y. Harada, K. Fukaura, T. Aoki, D. Yokoi and Y. Haruna, Influence of Microshot Peening on Surface Layer Characteristics of Cold Tool Steel, Mater. Sci. Forum, 2017, 561–565, p 897–900. https://doi.org/10.4028/www.scientific.net/MSF.561-565.89710.4028/www.scientific.net/MSF.561-565.897 ↗
15. M. Ariati and R. Aldila, Application of shot Peening and Shot Blasting to Increase Hardness and Depth of Nitride Hardened Layer to the Modified H13 Steel, J. Adv. Mater. Res., 2013, 789, p 313–319. https://doi.org/10.4028/www.scientific.net/AMR.789.31310.4028/www.scientific.net/AMR.789.313 ↗
16. V. Bhavar, S.V. Patil, P. Kattire, P.P. Date and R.K.P. Singh, Influence of Shot Peening on DIN 1.2714 Hot Work Tool Steel, J. Mater. Sci. Chem. Eng., 2017, 7, p 81–90. https://doi.org/10.4236/msce.2017.5101210.4236/msce.2017.51012 ↗
17. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi and A. Lamikiz, Surface finishing of complexly shaped parts fabricated by selective laser melting, Grabchenko’s International Conference on Advanced Manufacturing Processes. InterPartner-2019. Lect. Notes Mech. Eng., 2020, p 186–195. https://doi.org/10.1007/978-3-030-40724-7_1910.1007/978-3-030-40724-7_19 ↗
18. M.A. Omari, H.M. Mousa and F.M. AL-Oqla and M. Aljarrah, Enhancing the Surface Hardness and Roughness of Engine Blades Using the Shot Peening Process, Int. J. Miner. Metall. Mater., 2019, 26, p 999–1004. https://doi.org/10.1007/s12613-019-1818-510.1007/s12613-019-1818-5 ↗
19. D.A. Lesyk, S. Martinez, V.V. Dzhemelinskyi, O. Stamann, B.N. Mordyuk and A. Lamikiz, Surface polishing of laser powder bed fused superalloy components by magnetic post-treatment, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP), 2020, 20327559, p 02SAMA17-1–02SAMA17-4. https://doi.org/10.1109/NAP51477.2020.930960010.1109/NAP51477.2020.9309600 ↗
20. L. Li, M. Kim, S. Lee, M. Bae and D. Lee, Influence of Multiple Ultrasonic Impact Treatments on Surface Roughness and Wear Performance of SUS301 Steel, Surf. Coat. Technol., 2016, 307, p 517–524. https://doi.org/10.1016/j.surfcoat.2016.09.02310.1016/j.surfcoat.2016.09.023 ↗
21. W. Ting, W. Dongpo, L. Gang, G. Baoming and S. Ningxia, Investigations on the Nanocrystallization of 40Cr Using Ultrasonic Surface Rolling Processing, Appl. Surf. Sci., 2008, 255, p 1824–1829. https://doi.org/10.1016/j.apsusc.2008.06.03410.1016/j.apsusc.2008.06.034 ↗
22. A. Amanov and Y.S. Pyun, Lowering Friction of Ball Screws Made of Different Steel Grades Through Ultrasonic Impact Treatment, Tribol. Int., 2018, 123, p 105–119. https://doi.org/10.1016/j.triboint.2018.03.00810.1016/j.triboint.2018.03.008 ↗
23. R. Mannens, L. Uhlmann, F. Lambers, A. Feuerhack and T. Bergs, Surface Integrity of AISI 52100 Bearing Steel After Robot-Based Machine Hammer Peening, J. Manuf. Mater. Process., 2020, 4, p 61. https://doi.org/10.3390/jmmp402006110.3390/jmmp4020061 ↗
24. J. Scheil, C. Müller, M. Steitz and P. Groche, Influence of Process Parameters on Surface Hardening in Hammer Peening and Deep Rolling, Key Eng. Mater., 2020, 554–557, p 1819–1827. https://doi.org/10.4028/www.scientific.net/KEM.554-557.181910.4028/www.scientific.net/KEM.554-557.1819 ↗
25. D.A. Lesyk, S. Martinez, V.V. Dzhemelinskyi, A. Lamikiz, B.N. Mordyuk and G.I. Prokopenko, Surface Microrelief and Hardness of Laser Hardened and Ultrasonically Peened AISI D2 Tool Steel, Surf. Coat. Technol., 2015, 278, p 108–120. https://doi.org/10.1016/j.surfcoat.2015.07.04910.1016/j.surfcoat.2015.07.049 ↗
26. V.V. Dzhemelinskyi, D.A. Lesyk, O.O. Goncharuk and O.O. Danyleiko, Surface Hardening and Finishing of Metallic Products by Hybrid Laser-Ultrasonic Treatment, East. -Eur. J. Enterp. Technol., 2018, 1(12), p 35–42. https://doi.org/10.15587/1729-4061.2018.12403110.15587/1729-4061.2018.124031 ↗
27. G.Q. Wang, X.P. Zhu, M.K. Lei and D.M. Guo, Inverse Surface Integrity Problem in Ultrasonic Impact-Treated AISI 304 Stainless Steel Components, Int. J. Adv. Manuf. Technol., 2016, 87, p 2033–2040. https://doi.org/10.1007/s00170-016-8597-110.1007/s00170-016-8597-1 ↗
28. Z. Fan, H. Xu, D. Li, L. Zhang and L. Liao, Surface Nanocrystallization of 35# Type Carbon Steel Induced by Ultrasonic Impact Treatment (UIT), Int. J. Fatigue, 2012, 27, p 1718–1722. https://doi.org/10.1016/j.proeng.2011.12.64110.1016/j.proeng.2011.12.641 ↗
29. D. Lesyk, S. Martinez, B. Mordyuk, V. Dzhemelinskyi and O. Danyleiko, Combined laser-ultrasonic surface hardening process for improving the properties of metallic products, Advances in Design, Simulation and Manufacturing. V. Ivanov, Y. Rong, J. Trojanowska, J. Venus, O. Liaposhchenko, J. Zajac, I. Pavlenko, M. Edl, D. Perakovic Ed., Springer, Cham, 2019, p 97–107. https://doi.org/10.1007/978-3-319-93587-4_1110.1007/978-3-319-93587-4_11 ↗
30. E.S. Statnikov, V.O. Muktepavel and A. Blomqvist, Comparison of Ultrasonic Impact Treatment (UIT) and Other Fatigue Life Improvement Methods, World Weld., 2006, 46, p 20–32. https://doi.org/10.1007/BF0326636810.1007/BF03266368 ↗
31. C. Liu, D. Chen, M.R. Hill, M.N. Tran and J. Zou, Effects of Ultrasonic Impact Treatment on Weld Microstructure, Hardness, and Residual Stress, Mater. Sci. Technol., 2017, 33, p 1601–1609. https://doi.org/10.1080/02670836.2017.129927710.1080/02670836.2017.1299277 ↗
32. T. Suzuki, T. Okawa, H. Shimanuki, T. Nose, N. Ohta, H. Suzuki and A. Moriai, Effect of Ultrasonic Impact Treatment (UIT) on Fatigue Strength of Welded Joints, J. Adv. Mater. Res., 2014, 966, p 736–742. https://doi.org/10.3390/ma906047110.3390/ma9060471 ↗
33. K. Yuan and Y. Sumi, Simulation of Residual Stress and Fatigue Strength of Welded Joints Under the Effects of Ultrasonic Impact Treatment (UIT), Int. J. Fatigue, 2016, 92, p 321–332. https://doi.org/10.1016/j.ijfatigue.2016.07.01810.1016/j.ijfatigue.2016.07.018 ↗
34. E. Emelianova, V. Romanova, O. Zinovieva and R. Balokhonov, The Effects of Surface-Layer Grain Size and Texture on Deformation-Induced Surface Roughening in Polycrystalline Titanium Hardened by Ultrasonic Impact Treatment, Mater. Sci. Eng. A, 2020, 793, p 139896. https://doi.org/10.1016/j.msea.2020.13989610.1016/j.msea.2020.139896 ↗
35. Z. Zhou, C.-F. Yao, Y. Zhao, Y. Wang and L. Tan, Effect of Ultrasonic Impact Treatment on the Surface Integrity of Nickel Alloy 718, Adv. Manuf., 2021, 9, p 160–171. https://doi.org/10.1007/s40436-020-00329-810.1007/s40436-020-00329-8 ↗
36. C.-F. Yao, Y. Zhao, Z. Zhou, D.-X. Wu and Y. Wang, A Surface Integrity Model of TC17 Titanium Alloy by Ultrasonic Impact Treatment, Int. J. Adv. Manuf. Technol., 2020, 108, p 881–893. https://doi.org/10.1007/s00170-020-05470-z10.1007/s00170-020-05470-z ↗
37. K.N. Tran, L. Salamanca-Riba and W.-A. Chiou, In Situ Elevated Temperature Transmission Electron Microscopy of Sensitized Aluminum–Magnesium Alloy Treated by Ultrasonic Impact Treatment, J. Mater. Res., 2014, 29, p 1456–1462. https://doi.org/10.1557/jmr.2014.14810.1557/jmr.2014.148 ↗
38. B. He, Y. Yu, Z. Chen and J. Liu, Surface Nanocrystallization of U70 Rail Steel Treated by Ultrasonic Impact, Mater. Sci. Forum, 2011, 694, p 270–273. https://doi.org/10.4028/www.scientific.net/MSF.694.27010.4028/www.scientific.net/MSF.694.270 ↗
39. T. He, Z. Ding, C. Shen and Z. Li, Mechanisms and Characteristics of Ultrasonic Impact Treatment on Steel Surface, Mater. J. Adv. Mater. Res., 2014, 834–836, p 649–653. https://doi.org/10.4028/www.scientific.net/AMR.834-836.64910.4028/www.scientific.net/AMR.834-836.649 ↗
40. X. Yang, X. Ling, S. Yang and S. Lu, Investigation on the Intrinsic Plasticity of Gradient Nano-Grained AISI 304 Stainless Steel Treated by Ultrasonic Impact Treatment, ASME 2014 Pressure Vessels and Piping Conference Mater. Fab., 2014, 6A, p PVP2014-28239. https://doi.org/10.1115/PVP2014-2823910.1115/PVP2014-28239 ↗
41. C. Chen, Z. Guo, J. Luo, W. Wang and J. Hao, Effects of Ultrasonic Treatment on Microstructure and Properties of Al-based Composites Reinforced by In Situ Al2O3 Nanoparticles, High Temp. Mater. Process., 2015, 35, p 169–2175. https://doi.org/10.1515/htmp-2014-015010.1515/htmp-2014-0150 ↗
42. M. Li, Q. Zhang, B. Han, L. Song, J. Li and J. Yang, Investigation on Microstructure and Properties of AlxCoCrFeMnNi High Entropy Alloys by Ultrasonic Impact Treatment, J. Alloys Compd., 2020, 816, p 152626. https://doi.org/10.1016/j.jallcom.2019.15262610.1016/j.jallcom.2019.152626 ↗
43. C. Liu, J. Wang, L. Tian, Z. Liu, J. Wang and J. Zhang, Properties and Formation Mechanism of Cladding Layer on High-Strength Low-Alloy Steel Subjected to Ultrasonic Impact Treatment with Titanium Alloy Pin, Surf. Coat. Technol., 2021, 418, p 127256. https://doi.org/10.1016/j.surfcoat.2021.12725610.1016/j.surfcoat.2021.127256 ↗
44. M.M. Ganiev and I.M. Ganiev, The Influence of Ultrasonic Impact Treatment on Steel Corrosion Resistance, Mater. Sci. Forum, 2019, 973, p 161–165. https://doi.org/10.4028/www.scientific.net/MSF.973.16110.4028/www.scientific.net/MSF.973.161 ↗
45. X. Yang, X. Ling and J. Zhou, Optimization of the Fatigue Resistance of AISI304 Stainless Steel by Ultrasonic Impact Treatment, Int. J. Fatigue, 2014, 61, p 28–38. https://doi.org/10.1016/j.ijfatigue.2013.12.00310.1016/j.ijfatigue.2013.12.003 ↗
46. G.Q. Wang, M.K. Lei and D.M. Guo, Interactions Between Surface Integrity Parameters on AISI 304 Austenitic Stainless Steel Components by Ultrasonic Impact Treatment, Procedia CIRP, 2016, 45, p 323–326.10.1016/j.procir.2016.02.351 ↗
47. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, K.E. Grinkevych and I.V. Tkachenko, Laser-Hardened and Ultrasonically Peened Surface Layers on Tool Steel AISI D2: Correlation of the Bearing Curves’ Parameters, Hardness and Wear, J. Mater. Eng. Perform., 2018, 27, p 764–776. https://doi.org/10.1007/s11665-017-3107-710.1007/s11665-017-3107-7 ↗
48. D. Lesyk, S. Martinez, B. Mordyuk, V. Dzhemelinskyi and O. Danyleiko, Effects of the combined laser-ultrasonic surface hardening induced microstructure and phase state on mechanical properties of AISI D2 tool steel, Advances in Design, Simulation and Manufacturing II: Proceedings of the 2nd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine. V. Ivanov, J. Trojanowska, J. Machado, O. Liaposhchenko, J. Zajac, I. Pavlenko, M. Edl, D. Perakovic Ed., Springer, Cham, 2020, p 188–198. https://doi.org/10.1007/978-3-030-22365-6_1910.1007/978-3-030-22365-6_19 ↗
49. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, Yu.V. Milman and K.E. Grinkevych, Microstructure Related Enhancement in Wear Resistance of Tool Steel AISI D2 by Applying Laser Heat Treatment Followed by Ultrasonic Impact Treatment, Surf. Coat. Technol., 2017, 328, p 344–354. https://doi.org/10.1016/j.surfcoat.2017.08.04510.1016/j.surfcoat.2017.08.045 ↗
50. X. Yang, X. Wang, X. Ling and D. Wang, Enhanced Mechanical Behaviors of Gradient Nano-Grained Austenite Stainless Steel by Means of Ultrasonic Impact Treatment, Results Phys., 2017, 7, p 1412–1421. https://doi.org/10.1016/j.rinp.2017.04.00210.1016/j.rinp.2017.04.002 ↗
51. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz and G.I. Prokopenko, Effects of Laser Heat Treatment Combined with Ultrasonic Impact Treatment on the Surface Topography and Hardness of Carbon Steel AISI 1045, Opt. Laser. Technol., 2019, 111, p 424–438. https://doi.org/10.1016/j.optlastec.2018.09.03010.1016/j.optlastec.2018.09.030 ↗
52. B.M. Mordyuk, O.P. Karasevska, P.E. Rudoi, I.O. Skyba and H.H. Kaminskyi, Influence of Ultrasonic Vibrations on the Phase Transformation and Strain Hardening of a Zr18Nb Alloy in Tension, Mater. Sci., 2013, 48, p 546–554. https://doi.org/10.1007/s00170-016-8597-110.1007/s00170-016-8597-1 ↗
53. B.N. Mordyuk, Yu.V. Milman, M.O. Iefimov, G.I. Prokopenko, V.V. Silberschmidt, M.I. Danylenko and A.V. Kotko, Characterization of Ultrasonically Peened and Laser-Shock Peened Surface Layers of AISI 321 Stainless Steel, Surf. Coat. Technol., 2008, 202, p 4875–4883. https://doi.org/10.1016/j.surfcoat.2008.04.08010.1016/j.surfcoat.2008.04.080 ↗
54. F. Kara, U. Koklu and U. Kabasakaoglu, Taguchi Optimization of Surface Roughness in Grinding of Cryogenically Treated AISI 5140 Steel, Mater. Test., 2020, 62, p 1041–1047. https://doi.org/10.3139/120.11158310.3139/120.111583 ↗
55. B. Ozturk and F. Kara, Calculation and Estimation of Surface Roughness and Energy Consumption in Milling of 6061 Alloy, Adv. Mater. Sci. Eng., 2020, 2020, p 5687951. https://doi.org/10.1155/2020/568795110.1155/2020/5687951 ↗
56. D.A. Lesyk, B.N. Mordyuk, S. Martinez, M.O. Iefimov, V.V. Dzhemelinskyi and A. Lamikiz, Influence of Combined Laser Heat Treatment and Ultrasonic Impact Treatment on Microstructure and Corrosion Behavior of AISI 1045 Steel, Surf. Coat. Technol., 2020, 2020(401), p 126275. https://doi.org/10.1016/j.surfcoat.2020.12627510.1016/j.surfcoat.2020.126275 ↗
57. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, G.I. Prokopenko, M.O. Iefimov and K.E. Grinkevych, Combining Laser Transformation Hardening and Ultrasonic Impact Strain Hardening for Enhanced Wear Resistance of AISI 1045 Steel, Wear, 2020, 462–463, p 203494. https://doi.org/10.1016/j.wear.2020.20349410.1016/j.wear.2020.203494 ↗
58. J. Liu, J. Wang, C. Leung and F. Gao, A Multi-Parameter Optimization Model for the Evaluation of Shale Gas Recovery Enhancement, Energies, 2018, 11, p 654. https://doi.org/10.3390/en1103065410.3390/en11030654 ↗
59. H.W. Zhang, S. Ohsaki, S. Mitao, M. Ohnuma and K. Hono, Microstructural Investigation of White Etching Layer on Pearlite Steel Rail, Mater. Sci. Eng. A, 2006, 421, p 191–199. https://doi.org/10.1016/j.msea.2006.01.03310.1016/j.msea.2006.01.033 ↗
60. Y. Zhou, J.F. Peng, Z.P. Luo, B.B. Cao, X.S. Jin and M.H. Zhu, Phase and Microstructural Evolution in White Etching Layer of a Pearlitic Steel During Rolling–Sliding Friction, Wear, 2016, 362–363, p 8–17. https://doi.org/10.1016/j.wear.2016.05.00710.1016/j.wear.2016.05.007 ↗
61. V.G. Gavriljuk, Decomposition of Cementite in Pearlitic Steel due to Plastic Deformation, Mater. Sci. Eng. A, 2003, 345, p 81–89. https://doi.org/10.1016/S0921-5093(02)00358-110.1016/S0921-5093(02)00358-1 ↗
62. Y.V. Milman, B.M. Mordyuk, K.E. Grinkevych, S.I. Chugunova, I.V. Goncharova, A.I. Lukyanov and D.A. Lesyk, New Possibilities for Characterization of Wear Rate of Materials at Friction by Indentation, Prog. Phys. Met., 2020, 21, p 554–579. https://doi.org/10.15407/ufm.21.04.55410.15407/ufm.21.04.554 ↗
63. A.H. Maamoun, M.A. Elbestawi and S.C. Veldhuis, Influence of Shot Peening on AlSi10Mg Parts Fabricated by Additive Manufacturing, J. Manuf. Mater. Process., 2018, 2, p 40. https://doi.org/10.3390/jmmp203004010.3390/jmmp2030040 ↗
64. D. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi and A. Lamikiz, Wear characteristics of carbon and tool steels hardened by combined laser-ultrasonic surface treatment, Advances in Design, Simulation and Manufacturing IV. DSMIE 2021. Lect. Notes Mech. Eng. V. Ivanov, J. Trojanowska, I. Pavlenko, J. Zajac, D. Peraković Ed., Springer, Cham, 2021, p 62–72. https://doi.org/10.1007/978-3-030-77719-7_710.1007/978-3-030-77719-7_7 ↗
65. P.T. Iswanto, E.U.K. Maliwemu, V. Malau, F. Imaduddin and H.M. Sadida, Surface Roughness, Hardness, and Fatigue-Corrosion Characteristic of AISI 3016L by Shot Peening, Metalurgija, 2020, 59, p 183–186.
66. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz and G.I. Prokopenko, Post-Processing of the INCONEL 718 Alloy Parts Fabricated by Selective Laser Melting: Effects of Mechanical Surface Treatments on Surface Topography, Porosity, Hardness and Residual Stress, Surf. Coat. Technol., 2020, 381, p 125136. https://doi.org/10.1016/j.surfcoat.2019.12513610.1016/j.surfcoat.2019.125136 ↗
67. H. Soyama, Comparison Between Shot Peening, Cavitation Peening, and Laser Peening by Observation of Crack Initiation and Crack Growth in Stainless Steel, Metals, 2020, 10, p 63. https://doi.org/10.3390/met1001006310.3390/met10010063 ↗
68. A.H. Astaraee, S. Bagherifard, S. Monti and M. Guagliano, Evaluating the Homogeneity of Surface Features Induced by Impact-Based Surface Treatments, Materials, 2021, 14, p 3476. https://doi.org/10.3390/ma1413347610.3390/ma14133476 ↗
69. D.A. Lesyk, W. Alnusirat, S. Martinez, B.N. Mordyuk and V.V. Dzhemelinskyi, Comparison of the Effects of Laser, Ultrasonic, and Combined Laser-Ultrasonic Hardening Treatments on Surface Properties of AISI 1045 Steel Parts, Grabchenko’s International Conference on Advanced Manufacturing Processes. InterPartner-2021. Lect. Notes Mech. Eng., 2022, p 313–322. https://doi.org/10.1007/978-3-030-91327-4_3110.1007/978-3-030-91327-4_31 ↗
70. F. Kara, Optimization of Cutting Parameters in Finishing Milling of Hardox 400 Steel, Int. J. Anal. Exp. Finite Elem. Anal., 2018, 5, p 44–49. https://doi.org/10.26706/IJAEFEA.3.5.2018090110.26706/IJAEFEA.3.5.20180901 ↗