Aqueous Corrosion Behavior of Cast CoCrFeMnNi Alloy
Source abstract
Abstract
CoCrFeMnNi high-entropy alloy demonstrates good mechanical properties and can be further strengthened by thermomechanical processes. A sample alloy prepared by vacuum casting in a graphite mold was further investigated for its corrosion resistance. One-millimeter thin strips of cast alloy were used to investigate its corrosion behavior at room temperature. Linear potentiodynamic tests of the alloy in sodium chloride solution confirmed uniform corrosion property comparable to stainless steel AISI 304. However, a positive cyclic hysteresis loop indicated susceptibility to pitting corrosion. In sodium hydroxide solution, metastable pit formation was observed, while sulfuric acid solution passivated the alloy. In both cases, the alloy did not show any spontaneous pitting tendency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.-W. Yeh, S.K. Chen, S.J. Lin, and J.Y. Gan, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes, Adv. Eng. Mater., 2004, 6(5), p 299–30310.1002/adem.200300567 ↗
2. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu, Microstructures and Properties of High-Entropy Alloys, Prog. Mater Sci., 2014, 61, p 1–9310.1016/j.pmatsci.2013.10.001 ↗
3. Y. Qiu, M.A. Gibson, H.L. Fraser, and N. Birbilis, Corrosion Characteristics of High Entropy Alloys, Mater. Sci. Technol., 2015, 31(10), p 1235–124310.1179/1743284715Y.0000000026 ↗
4. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent, Microstructural Development in Equiatomic Multicomponent Alloys, Mater. Sci. Eng. A, 2004, 375–377, p 213–21810.1016/j.msea.2003.10.257 ↗
5. K.V.S. Thurston, B. Gludovatz, A. Hohenwarter, G. Laplanche, E.P. George, and R.O. Ritchie, Effect of Temperature on the Fatigue-Crack Growth Behavior of the High-Entropy Alloy CrMnFeCoNi, Intermetallics, 2017, 88, p 65–7210.1016/j.intermet.2017.05.009 ↗
6. M.J. Yao, K.G. Pradeep, C.C. Tasan, and D. Raabe, A Novel, Single Phase, Non-equiatomic FeMnNiCoCr High-Entropy Alloy with Exceptional Phase Stability and Tensile Ductility, Scr. Mater., 2014, 72, p 5–810.1016/j.scriptamat.2013.09.030 ↗
7. E.J. Pickering, R. Muñoz-Moreno, H.J. Stone, and N.G. Jones, Precipitation in the Equiatomic High-Entropy Alloy CrMnFeCoNi, Scr. Mater., 2016, 113, p 106–10910.1016/j.scriptamat.2015.10.025 ↗
8. B. Schuh, F. Mendez-Martin, B. Völker, E.P. George, H. Clemens, R. Pippan, and A. Hohenwarter, Mechanical Properties, Microstructure and Thermal Stability of a Nanocrystalline CoCrFeMnNi High-Entropy Alloy After Severe Plastic Deformation, Acta Mater., 2015, 96, p 258–26810.1016/j.actamat.2015.06.025 ↗
9. Y.-K. Kim, Y.-A. Joo, H.S. Kim, and K.-A. Lee, High Temperature Oxidation Behavior of Cr-Mn-Fe-Co-Ni High Entropy Alloy, Intermetallics, 2018, 98, p 45–5310.1016/j.intermet.2018.04.006 ↗
10. C.-H. Tsau, S.-X. Lin, and C.-H. Fang, Microstructures and Corrosion Behaviors of FeCoNi and CrFeCoNi Equimolar Alloys, Mater. Chem. Phys., 2017, 186, p 534–54010.1016/j.matchemphys.2016.11.033 ↗
11. H. Lu, Z. Li, A.M. Mingers, and D. Raabe, Corrosion Behavior of an Equiatomic CoCrFeMnNi High-Entropy Alloy Compared with 304 Stainless Steel in Sulfuric Acid Solution, Corros. Sci., 2018, 134, p 131–13910.1016/j.corsci.2018.02.031 ↗
12. Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry, ASTM E1097-12 (2017)
13. Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis, ASTM E1941-10 (2016)
14. S. Zhang, C.L. Wu, C.H. Zhang, M. Guan, and J.Z. Tan, Laser Surface Alloying of FeCoCrAlNi High-Entropy Alloy on 304 Stainless Steel to Enhance Corrosion and Cavitation Erosion Resistance, Opt. Laser Technol., 2016, 84, p 23–3110.1016/j.optlastec.2016.04.011 ↗
15. M. Vaidya, A. Karati, A. Marshal, K.G. Pradeep, and B.S. Murty, Phase Evolution and Stability of Nanocrystalline CoCrFeNi and CoCrFeMnNi High Entropy Alloys, J. Alloys Compd., 2019, 770, p 1004–101510.1016/j.jallcom.2018.08.200 ↗
16. W.S. Tait, An Introduction to Electrochemical Corrosion Testing for Practicing Engineers and Scientists, Racine, Wisconsin, 1994
17. J.R. Galvele, in Passivity of Metals, ed. by R.P. Frankenthal, J. Kruger (The Electrochemical Society, Princeton, 1978), p. 285
18. H.S. Isaacs, U. Bertocci, J. Kruger, and S. Smialowska, (eds.) in Advances in Localized Corrosion: Proceedings of the Second International Conference on Localized Corrosion. (Houston, Texas: National Association of Corrosion Engineers, 1990), p. 41
19. G.S. Frankel, Pitting Corrosion of Metals a Review of the Critical Factors, J. Electrochem. Soc., 1998, 145(6), p 2186–219810.1149/1.1838615 ↗
20. P.M. Natishan, W.E. O’Grady, E. McCafferty, D.E. Ramaker, K. Pandya, and A. Russell, Chloride Uptake by Oxide Covered Aluminum as Determined by X-Ray Photoelectron and X-Ray Absorption Spectroscopy, J. Electrochem. Soc., 1999, 146(5), p 1737–174010.1149/1.1391835 ↗
21. L.A. Krebs and J. Kruger, in Passivity of Metals and Semiconductors, ed. by M.B. Ives, J.L. Luo, J.R. Rodda (The Electrochemical Society, Pennington, 2001), p. 561
22. D.D. Macdonald, The Point Defect Model for the Passive State, J. Electrochem. Soc., 1992, 139(12), p 3434–344910.1149/1.2069096 ↗
23. E. McCafferty, Introduction to Corrosion Science, Springer, Berlin, 2009
24. E. McCafferty, A Competitive Adsorption Model for the Inhibition of Crevice Corrosion and Pitting, J. Electrochem. Soc., 1990, 137(12), p 3731–373710.1149/1.2086294 ↗
25. G. Butler, P. Stretton, and J.G. Beynon, Initiation and Growth of Pits on High-Purity Iron and Its Alloys with Chromium and Copper in Neutral Chloride Solutions, Br. Corros. J., 1972, 7(4), p 168–17310.1179/000705972798322991 ↗
26. H.-H. Strehblow, Nucleation and Repassivation of Corrosion Pits for Pitting on Iron and Nickel, Mater. Corros., 1976, 27(11), p 792–79910.1002/maco.19760271106 ↗
27. T.J. Glover, Recent Developments in Corrosion-Resistant Metallic Alloys for Construction of Sea-Water Pumps, Mater. Perform., 1988, 27, p 51–56
28. Y.L. Chou, J.W. Yeh, and H.C. Shih, The Effect of Molybdenum on the Corrosion Behavior of the High-Entropy Alloys Co1.CrFeNi1.5Ti0.5Mox in Aqueous Environments, Corros. Sci., 2010, 52, p 2571–258110.1016/j.corsci.2010.04.004 ↗
29. A.-D. Kamal, K.N. Raymond, and D.P. Freyberg, The Bihydroxide (H3O2-) Anion. A Very Short, Symmetric Hydrogen Bond, J. Am. Chem. Soc., 1979, 101(13), p 3688–368910.1021/ja00507a059 ↗
30. B.N. Popov, Corrosion Engineering: Principles and Solved Problems, Elsevier, Amsterdam, 2015
31. C.P. Lee, Y.Y. Chen, C.Y. Hsu, J.W. Yeh, and H.C. Shih, Enhancing Pitting Corrosion Resistance of AlxCrFe1.5MnNi0.5 High-Entropy Alloys by Anodic Treatment in Sulfuric Acid, Thin Solid Films, 2008, 517, p 1301–130510.1016/j.tsf.2008.06.014 ↗