A Very High-Cycle Fatigue Test and Fatigue Properties of TC17 Titanium Alloy
Source abstract
Abstract
The present work studied the very high-cycle fatigue (VHCF) test and fatigue properties of TC17 titanium alloy. The specimens for bending vibration were designed using the finite element method and the VHCF tests were conducted by using the ultrasonic fatigue testing system. The results indicated that there is no the fatigue limit for TC17 titanium alloy, and the S–N curve shows a continuously descending trend. The fatigue crack initiates at the specimen surface within the range of VHCF and the VHCF lives follow the log-normal distribution more closely.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Titanium Alloys Microstructure and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. B. Pyttel, D. Schwerdt, and C. Berger, Very High Cycle Fatigue—is There a Fatigue Limit?, Int. J. Fatigue, 2011, 33, p 49–5810.1016/j.ijfatigue.2010.05.009 ↗
2. C. Bathias and P.C. Paris, Gigacycle Fatigue of Metallic Aircraft Components, Int. J. Fatigue, 2010, 32, p 894–89710.1016/j.ijfatigue.2009.03.015 ↗
3. L. Yu-Heng, X. Zhi-Yu, H. Lei et al., Ultra-High Cycle Fatigue Behaviour of Warm Compaction Fe-Cu-Ni-Mo-C Sintered Material, Mater. Des., 2014, 55, p 758–76310.1016/j.matdes.2013.10.049 ↗
4. P. Grad, B. Reuscher, and A. Brodyanski, Mechanism of Fatigue Crack Initiation and Propagation in the Very High Cycle Fatigue Regime of High-Strength Steels, Scr. Mater., 2012, 67, p 838–84110.1016/j.scriptamat.2012.07.049 ↗
5. H. Stefan, B. Frank, W. Guntram et al., Analysis of Fatigue Properties and Failure Mechanisms of Ti6Al4V in the Very High Cycle Fatigue Regime Using Ultrasonic Technology and 3D Laser Scanning Vibrometry, Ultrasonics, 2013, 53, p 1433–144010.1016/j.ultras.2013.03.002 ↗
6. P.F. Filgueiras, C. Bathias, E.S. Palma et al., Inducing Very High Cycle Fretting-Fatigue in the Ultrasonic Regime, Tribol. Int., 2014, 76, p 57–6210.1016/j.triboint.2013.10.023 ↗
7. Bathias C, Paris P.C. Gigacycle Fatigue in Mechanical Practice. NewYork: Marcel Dekker, 2005.10.1201/9780203020609 ↗
8. MIL-HDBK, 1783BW/CHANGE2, Engine Structural Integrity Programs (ENSIP). US Department of Defense, Washington, 2004.
9. M. Bruchhausen, P. Hähner, B. Fischer et al., Device for Carrying Out Environmental Very High Cycle Fatigue Tests With Ultrasonic Excitation in Asymmetric Push-Pull Mode, Int. J. Fatigue, 2013, 52, p 11–1910.1016/j.ijfatigue.2013.02.010 ↗
10. M. Nakajima, K. Tokaji, and H. Itoga, Effect of Loading Condition on Very High Cycle Fatigue Behavior in a High Strength Steel, Int. J. Fatigue, 2010, 32, p 475–48010.1016/j.ijfatigue.2009.09.003 ↗
11. N. Baohua, Zh Zheng, Zh Zihua et al., Effect of Anodizing Treatment on the Very High Cycle Fatigue Behavior of 2A12-T4 Aluminum Alloy, Mater. Des., 2013, 50, p 1005–101010.1016/j.matdes.2013.03.083 ↗
12. H. Youshi, L. Zhengqiang, S. Chengqi et al., Propensities of Crack Interior Initiation and Early Growth for Very-High-Cycle Fatigue of High Strength Steels, Int. J. Fatigue, 2014, 58, p 144–15110.1016/j.ijfatigue.2013.02.023 ↗
13. Ch Guocai and Zh Nian, Study of Crack Initiation or Damage in Very High Cycle Fatigue Using Ultrasonic Fatigue Test and Microstructure Analysis, Ultrasonics, 2013, 53, p 1406–141110.1016/j.ultras.2013.05.008 ↗
14. Y. Ochi, T. Matsumura, K. Masaki, and S. Yoshida, High-Cycle Rotating Bending Fatigue Property in Very Long-Life Regime of High-Strength Steels, Fatigue Fract. Eng. Mater. Struct., 2002, 25(8/9), p 823–83010.1046/j.1460-2695.2002.00575.x ↗
15. T. Sakai, M. Takeda, K. Shiozawa, Y. Ochi et al., Experimental Reconfirmation of Characteristic S-N Property for High Carbon Chromium Bearing Steel in Wide Life Region in Rotating Bending, J Soc Mater Sci Jpn, 2000, 49(7), p 779–78510.2472/jsms.49.779 ↗
16. X. Hongqian, T. Hua, W. Qingyuan et al., Development of a Three-Point Bending Fatigue Testing Methodology at 20 kHz Frequency, Int. J. Fatigue, 2007, 29, p 2085–209310.1016/j.ijfatigue.2007.03.018 ↗
17. T. Weiwei and W. Hong, Method of Ultrasonic Bending Fatigue and Application, Mech. Eng., 2008, 30(6), p 43–46
18. Y. Shimamura, K. Narita, H. Ishii et al., Fatigue Properties of Carburized Alloy Steel in Very High Cycle Regime Under Torsional Loading, Int. J. Fatigue, 2014, 60, p 57–6210.1016/j.ijfatigue.2013.06.016 ↗
19. I. Marines, D. Jean-Pierre, and C. Bathias, Development of a New Device to Perform Torsional Ultrasonic Fatigue Testing, Int. J. Fatigue, 2007, 29, p 2094–210110.1016/j.ijfatigue.2007.03.016 ↗
20. Ni J, Bathias C. Development of an ultrasonic fatigue device and its application in fatigue behavior studies. 10th International Conference on Experimental Mechanics, 1994, Lisbon, Portugal.
21. I. Marines, X. Bin, and C. Bathias, An Understanding of Very High Cycle Fatigue of Metals, Int. J. Fatigue, 2003, 25, p 1101–110710.1016/S0142-1123(03)00147-6 ↗
22. Y. Furuya, S. Matsuoka, T. Abe, and K. Yamaguchi, Gigacycle Fatigue Properties for High-Strength Low-Alloy Steel at 100 Hz, 600 Hz, and 20 kHz, Scripta Mater., 2002, 46, p 157–16210.1016/S1359-6462(01)01213-1 ↗
23. W. Qingyuan, J.Y. Berard, A. Dubarre et al., Gigacycle Fatigue of Ferrous Alloys, Fatigue Fract. Eng. Mater. Struct., 1999, 22, p 667–67210.1046/j.1460-2695.1999.t01-1-00185.x ↗
24. Chuanyao Ch. Fatigue and Fracture. Huazhong Science and Technology University Press, 2002.
25. J. Schijve, A normal Distribution or a Weibull Distribution for Fatigue Lives, Fatigue Fract. Eng. Mater. Struct., 1993, 8, p 851–85910.1111/j.1460-2695.1993.tb00124.x ↗
26. N. Ranc, D. Wagner, and P.C. Paris, Study of Thermal Effects Associated with Crack Propagation During Very High Cycle Fatigue Tests, Acta Mater., 2008, 56, p 4012–402110.1016/j.actamat.2008.04.023 ↗
27. L. Zhengqiang, H. Youshi, X. Jijia et al., Effects of Inclusion Size and locaTIon on Very-High-Cycle Fatigue Behavior for High Strength Steels, Materials Science&EngineeringA, 2012, 558, p 234–241
28. Y. Furuya, H. Hirukawa, T. Kimura et al., Gigacycle Fatigue Properties of High-Strength Steels According to Inclusion and ODA Sizes, Metall. Mater. Trans. A, 2007, 38, p 1722–173010.1007/s11661-007-9225-3 ↗
29. S.E. Stanzl-Tschegg, Fracture Mechanisms and Fracture Mechanics at Ultrasonic Frequencies, Fatigue Fract. Eng. Mater. Struct., 1999, 22, p 567–57910.1046/j.1460-2695.1999.00180.x ↗
30. L. Chengli, Lu Zhengzhou, X. Youliang et al., Reliability Analysis for Low Cycle Fatigue Life of the Aeronautical Engine Turbine Disc Structure Under Random Environment, Mater. Sci. Eng. A, 2005, 395, p 218–22510.1016/j.msea.2004.12.014 ↗
31. P. Liangming, F. Penghuai, L. Zhenming et al., High Cycle Fatigue Behaviors of Low Pressure Cast Mg-3Nd-0.2Zn-2Zr Alloys, Mater. Sci. Eng., A, 2014, 611, p 170–17610.1016/j.msea.2014.05.085 ↗
32. S. Sadek and M. Olsson, New Models for Prediction of High Cycle Fatigue Failure Based on Highly Loaded Regions, Int. J. Fatigue, 2014, 66, p 101–11010.1016/j.ijfatigue.2014.03.014 ↗
33. Y. Weixing and G. Shenjie, VHCF Test and Life Distribution of Aluminum Alloy LC4CS, Int. J. Fatigue, 2008, 30, p 172–17710.1016/j.ijfatigue.2007.02.004 ↗
34. Ch Yueliang, Y. Xiaohua, and Q. Haiqin, Study on Corrosion Damage Distribution Law of Aircraft Structure, Mater. Sci. Eng., 2002, 20(3), p 376–381