Failure Study of Creep and High-Temperature Tensile Tested Tungsten Inert Gas Welded P92 Steel and AISI 304L Steel Dissimilar Weld Joints
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Temperature Alloys and Creep · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. X.L. Bai, Q. Zhang, G.H. Chen, J.Q. Wang, J.J. Liu, and X.H. Yu et al., High Temperature Tensile Test and Creep Rupture Strength Prediction of T92/Super304H Dissimilar Steel Weld Joints, Mater. High Temp., 2014, 31, p 69–76. https://doi.org/10.1179/0960340913Z.000000000910.1179/0960340913Z.0000000009 ↗
2. K. Nicol, Status of Advanced Ultra-Supercritical Pulverised Coal Technology, IEA Clean Coal Centre, Gloucester, 2013.
3. A.K. Bhaduri, S. Venkadesan, P. Rodriguez, and P.G. Mukunda, Transition Metal Joints for Steam Generators-An Overview, Int. J. Press. Vessel. Pip., 1994, 58, p 251–265. https://doi.org/10.1016/0308-0161(94)90061-210.1016/0308-0161(94)90061-2 ↗
4. W. Zhang, T. Zhang, X. Wang, H. Chen, and J. Gong, Remaining Creep Properties and Fracture Behaviour of P92 Steel Welded Joint under Prior Low Cycle Fatigue Loading, J. Mater. Res. Technol., 2020, 9, p 7887–7899. https://doi.org/10.1016/j.jmrt.2020.05.07810.1016/j.jmrt.2020.05.078 ↗
5. M.Ş Adin and M. Okumuş, Investigation of Microstructural and Mechanical Properties of Dissimilar Metal Weld Between AISI 420 and AISI 1018 STEELS, Arab. J. Sci. Eng., 2022, 47, p 8341–8350. https://doi.org/10.1007/s13369-021-06243-w10.1007/s13369-021-06243-w ↗
6. M.Ş Adin, A Parametric Study on the Mechanical Properties of MIG and TIG Welded Dissimilar Steel Joints, J. Adhes. Sci. Technol, 2023 https://doi.org/10.1080/01694243.2023.222139110.1080/01694243.2023.2221391 ↗
7. G. Chen, Q. Zhang, J. Liu, J. Wang, X. Yu, and J. Hua et al., Microstructures and Mechanical Properties of T92/Super304H Dissimilar Steel Weld Joints After High-Temperature Ageing, Mater. Des., 2013, 44, p 469–475. https://doi.org/10.1016/j.matdes.2012.08.02210.1016/j.matdes.2012.08.022 ↗
8. M. Amra, S.R. Alavi Zaree, and R. Dehmolaei, Dissimilar Welding Between 1.4742 Ferritic and 310S Austenitic Stainless Steels: Assessment of Oxidation Behaviour, Met. Mater. Int., 2021, 27, p 931–45. https://doi.org/10.1007/s12540-019-00485-y10.1007/s12540-019-00485-y ↗
9. Y. Zhang, H. Jing, L. Xu, Y. Han, L. Zhao, and B. Xiao, Microstructure and Mechanical Performance of Welded Joint Between a Novel Heat-Resistant Steel and Inconel 617 Weld Metal, Mater. Charact., 2018, 139, p 279–292. https://doi.org/10.1016/j.matchar.2018.03.01210.1016/j.matchar.2018.03.012 ↗
10. J. Parker, In-service Behaviour of Creep Strength Enhanced Ferritic Steels Grade 91 and Grade 92–Part 2 Weld Issues, Int. J. Press. Vessel. Pip., 2014, 114, p 76–87.10.1016/j.ijpvp.2012.11.004 ↗
11. J.H. Lee, J.H. Hwang, Y.S. Park, T.M. Kim, D.H. Bae, and W.B. Seo et al., Assessing Mechanical Properties of the Dissimilar Metal Welding Between P92 Steels and alloy 617 at High Temperature, J. Mech. Sci. Technol., 2016, 30, p 4453–4457. https://doi.org/10.1007/s12206-016-0911-110.1007/s12206-016-0911-1 ↗
12. E.I. Samuel, B.K. Choud, D.P.R. Palaparti, and M.D. Mathew, Creep Deformation and Rupture Behaviour of P92 Steel at 92 23 K, Procedia Eng., 2013, 55, p 64–69. https://doi.org/10.1016/j.proeng.2013.03.22010.1016/j.proeng.2013.03.220 ↗
13. J. Cao, Y. Gong, and Z. Yang, Microstructural Analysis on Creep Properties of Dissimilar Materials Joints Between T92 Martensitic and HR3C Austenitic Steels, Mater. Sci. Eng. A, 2011, 528, p 6103–6111. https://doi.org/10.1016/j.msea.2011.04.05710.1016/j.msea.2011.04.057 ↗
14. L. Falat, M. Svoboda, A. Výrostková, I. Petryshynets, and M. Sopko, Microstructure and Creep Characteristics of Dissimilar T91/TP316H Martensitic/Austenitic Welded Joint with Ni-based Weld Metal, Mater. Charact., 2012, 72, p 15–23. https://doi.org/10.1016/j.matchar.2012.06.01410.1016/j.matchar.2012.06.014 ↗
15. T. Matsunaga, H. Hongo, and M. Tabuchi, Interfacial Failure in Dissimilar Weld Joint of High Boron 9% Chromium Steel and Nickel-Based Alloy under High-Temperature Creep Condition, Mater. Sci. Eng. A, 2017, 695, p 302–308. https://doi.org/10.1016/j.msea.2017.04.01210.1016/j.msea.2017.04.012 ↗
16. Q. Wang, R. Xin, Z. Wang, Z. Han, X. Jiao, and J. Kang, Microstructure and its Effect on High Temperature Tensile Properties of T92/HR3C Dissimilar Weld Joints, J. Manuf. Process., 2022, 82, p 792–799. https://doi.org/10.1016/j.jmapro.2022.08.04610.1016/j.jmapro.2022.08.046 ↗
17. G. Chen, Y. Song, J. Wang, J. Liu, X. Yu, and J. Hua et al., High-Temperature Short-Term Tensile Test and Creep Rupture Strength Prediction of the T92/TP347H Dissimilar Steel Weld Joints, Eng. Fail. Anal., 2012, 26, p 220–229. https://doi.org/10.1016/j.engfailanal.2012.05.02410.1016/j.engfailanal.2012.05.024 ↗
18. M.Y. Kim, S.C. Kwak, I.S. Choi, Y.K. Lee, J.Y. Suh, and E. Fleury et al., High-Temperature Tensile and Creep Deformation of Cross-Weld Specimens of Weld Joint Between T92 Martensitic and Super304H Austenitic Steels, Mater. Charact., 2014, 97, p 161–168. https://doi.org/10.1016/j.matchar.2014.09.01110.1016/j.matchar.2014.09.011 ↗
19. K. Miao, J. Liu, Y. Yin, T. Wang, G. Sun, and C. Liu et al., Microstructure and Failure Analysis of TP347H/T91 Dissimilar Steel Welded Piping, J. Fail. Anal. Prev., 2022, 22, p 578–586. https://doi.org/10.1007/s11668-022-01349-110.1007/s11668-022-01349-1 ↗
20. F. Kabakcı, M. Acarer, M. Baydoğan, A. Selçuk Keskinkılıç, F.K. Acar, and H. Çimenoğlu, Effect of Co Addition on the Creep Rupture Properties of 9Cr-1.8W-xCo Weld Metals, Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2021, 52, p 129–142. https://doi.org/10.1007/s11661-020-06059-710.1007/s11661-020-06059-7 ↗
21. T. Sakthivel, G. Sasikala, M.K. Dash and R.P. Syamala, Creep Deformation and Rupture Behavior of P92 Steel Weld Joint Fabricated by NG-TIG Welding Process, J. Mater. Eng. Perform., 2019, 28, p 4364–4378. https://doi.org/10.1007/s11665-019-04157-110.1007/s11665-019-04157-1 ↗
22. E. Nandha Kumar, G.D. Janaki Ram, K. Devakumaran, and R.S. Kottada, Effect of Long-Term Exposure at 650 °C on Microstructural and Creep Characteristics of T92/Super304H dissimilar Welds, Weld World, 2020, 64, p 467–81. https://doi.org/10.1007/s40194-019-00845-710.1007/s40194-019-00845-7 ↗
23. W. Xue, P. Qian-gang, R. Yao-yao, S. Wei, Z. Hui-qiang, and L. Hong, Microstructure and Type IV Cracking Behavior of HAZ in P92 Steel Weldment, Mater. Sci. Eng. A, 2012, 552, p 493–501. https://doi.org/10.1016/j.msea.2012.05.07610.1016/j.msea.2012.05.076 ↗
24. Y. Huang, Y. Zhan, X. Luo, J. Xiong, J. Yang, and G. Mao et al., Creep Deformation and Rupture Behavior of 10Cr-3Co-2W Heat-Resistant Steel Weldments in Ultra Supercritical Power Units, Eng. Fail. Anal., 2022, 133, p 105984. https://doi.org/10.1016/j.engfailanal.2021.10598410.1016/j.engfailanal.2021.105984 ↗
25. X. Wang, X. Wang, Y.L. Zhang, C. Wang, Y. Li, and Q.S. Huang, Microstructure and Creep Fracture Behavior in HR3C/T92 Dissimilar Steel Welds, Mater. Sci. Eng. A, 2021, 799, p 140128. https://doi.org/10.1016/j.msea.2020.14012810.1016/j.msea.2020.140128 ↗
26. W. Liu, X. Liu, F. Lu, X. Tang, H. Cui, and Y. Gao, Creep Behavior and Microstructure Evaluation of Welded Joint in Dissimilar Modified 9Cr-1Mo Steels, Mater. Sci. Eng. A, 2015, 644, p 337–346. https://doi.org/10.1016/j.msea.2015.07.06810.1016/j.msea.2015.07.068 ↗
27. G. Dak and C. Pandey, Experimental Investigation on Microstructure, Mechanical Properties, and Residual Stresses of Dissimilar Welded Joint of Martensitic P92 and AISI 304L Austenitic Stainless Steel, Int. J. Press. Vessel. Pip., 2021, 194, p 104536. https://doi.org/10.1016/j.ijpvp.2021.10453610.1016/j.ijpvp.2021.104536 ↗
28. G. Dak, N. Khanna, and C. Pandey, Study on Narrow Gap Welding of Martensitic Grade P92 and Austenitic Grade AISI 304L SS Steel for Ultra-Supercritical Power Plant Application, Arch. Civ. Mech. Eng., 2023, 23, p 14. https://doi.org/10.1007/s43452-022-00540-310.1007/s43452-022-00540-3 ↗
29. M.S. Rahman, G. Priyadarshan, K.S. Raja, C. Nesbitt, and M. Misra, Characterization of High Temperature Deformation Behavior of Inconel 617, Mech. Mater., 2009, 41, p 261–270. https://doi.org/10.1016/j.mechmat.2008.10.00310.1016/j.mechmat.2008.10.003 ↗
30. G. Sainath, B.K. Choudhary, J. Christopher, E. Isaac Samuel, and M.D. Mathew, Effects of Temperature and Strain Rate on Tensile Stress-Strain and Workhardening Behaviour of P92 Ferritic Steel, Mater. Sci. Technol. (United Kingdom), 2014, 30, p 911–920. https://doi.org/10.1179/1743284713Y.000000034910.1179/1743284713Y.0000000349 ↗
31. B.R. Antoun, C. Alleman, and K. De La Trinidad, Experimental Investigation of Dynamic Strain Aging in 304l Stainless Steel, Conf. Proc. Soc. Exp. Mech. Ser., 2019 https://doi.org/10.1007/978-3-319-95053-2_1010.1007/978-3-319-95053-2_10 ↗
32. A. Zergani, H. Mirzadeh, and R. Mahmudi, Evolutions of Mechanical Properties of AISI 304L Stainless Steel under Shear Loading, Mater. Sci. Eng. A, 2020, 791, p 139667. https://doi.org/10.1016/j.msea.2020.13966710.1016/j.msea.2020.139667 ↗
33. A.K. Gupta, H.N. Krishnamurthy, Y. Singh, K.M. Prasad, and S.K. Singh, Development of Constitutive Models for Dynamic Strain Aging Regime in Austenitic Stainless Steel 304, Mater. Des., 2013, 45, p 616–627. https://doi.org/10.1016/j.matdes.2012.09.04110.1016/j.matdes.2012.09.041 ↗
34. Y.M. Song, G.H. Chen, J.Q. Wang, J.J. Liu, X.H. Yu, and J. Hua et al., Short-Term High-Temperature Tensile Tests and Prediction of Long-Term Strength of Welded Joints Of Dissimilar Steels T92/HR3C, Met. Sci. Heat Treat., 2014, 55, p 614–621. https://doi.org/10.1007/s11041-014-9678-010.1007/s11041-014-9678-0 ↗
35. W. Xue, Q. Pan, Y. Ren, W. Shang, H. Zeng, and H. Liu, Microstructure and Type IV Cracking Behavior of HAZ in P92 Steel Weldment, Mater. Sci. Eng. A, 2012, 552, p 493–501. https://doi.org/10.1016/j.msea.2012.05.07610.1016/j.msea.2012.05.076 ↗
36. D. Meng, F. Lu, H. Cui, Y. Ding, X. Tang, and X. Huo, Investigation on Creep Behavior of Welded Joint of Advanced 9%Cr Steels, J. Mater. Res., 2014, 30, p 197–205. https://doi.org/10.1557/jmr.2014.36610.1557/jmr.2014.366 ↗
37. M. Godec and D.A.S. Balantič, Coarsening Behaviour of M23C6 Carbides in Creep-Resistant Steel Exposed to High Temperatures, Sci. Rep., 2016, 6, p 1–7. https://doi.org/10.1038/srep2973410.1038/srep29734 ↗
38. R.K. Desu, H. Nitin Krishnamurthy, A. Balu, A.K. Gupta, and S.K. Singh, Mechanical Properties of Austenitic Stainless Steel 304L and 316L at Elevated Temperatures, J. Mater. Res. Technol., 2016, 5, p 13–20. https://doi.org/10.1016/j.jmrt.2015.04.00110.1016/j.jmrt.2015.04.001 ↗
39. M. Kim, S. Kwak, I. Choi, Y. Lee, J. Suh, and E. Fleury et al., Materials Characterization High-Temperature Tensile and Creep Deformation of Cross-Weld Specimens of Weld Joint Between T92 Martensitic and Super304H Austenitic Steels, Mater. Charact., 2014, 97, p 161–168. https://doi.org/10.1016/j.matchar.2014.09.01110.1016/j.matchar.2014.09.011 ↗
40. ASTM International–E139, Standard Test Method for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials, Annu. B ASTM Stand., 2018, 11, p 1–14. https://doi.org/10.1520/E0139-11R18.responsibility10.1520/E0139-11R18.responsibility ↗
41. G. Wu, K. Ding, T. Wei, S. Qiao, X. Liu, and Y. Gao, Rupture Behavior and Fracture Mode for Inconel 625-9% Cr Steel Dissimilar Welded Joints at High Temperature, Eng. Fail. Anal., 2021, 125, p 105412. https://doi.org/10.1016/j.engfailanal.2021.10541210.1016/j.engfailanal.2021.105412 ↗
42. J. Swaminathan, K. Guguloth, M. Gunjan, P. Roy, and R. Ghosh, Failure Analysis and Remaining Life Assessment of Service Exposed Primary Reformer Heater Tubes, Eng. Fail. Anal., 2008, 15, p 311–331. https://doi.org/10.1016/j.engfailanal.2007.02.00410.1016/j.engfailanal.2007.02.004 ↗
43. A.H.V. Pavan, K.S.N. Vikrant, R. Ravibharath, and K. Singh, Development and Evaluation of SUS 304H-IN 617 Welds for Advanced Ultra Supercritical Boiler Applications, Mater. Sci. Eng. A, 2015, 642, p 32–41. https://doi.org/10.1016/j.msea.2015.06.06510.1016/j.msea.2015.06.065 ↗
44. K.Y. Shin, J.W. Lee, J.M. Han, K.W. Lee, B.O. Kong, and H.U. Hong, Transition of Creep Damage Region in Dissimilar Welds Between Inconel 740H Ni-based Superalloy and P92 Ferritic/Martensitic Steel, Mater. Charact., 2018, 139, p 144–152. https://doi.org/10.1016/j.matchar.2018.02.03910.1016/j.matchar.2018.02.039 ↗
45. Y.I. Gong, J. Cao, L. Ji, C. Yang, C. Yao, and Z. Yang et al., Assessment of Creep Rupture Properties for Dissimilar Steels Welded Joints Between T92 and HR3C, Fatigue Fract. Eng. Mater. Struct., 2010, 34, p 83–96. https://doi.org/10.1111/j.1460-2695.2010.01496.x10.1111/j.1460-2695.2010.01496.x ↗
46. Y. Wang, C. Shao, M. Fan, N. Ma, and F. Lu, Effect of Solidified Grain Boundary on Interfacial Creep Failure Behavior for Steel/Nickel Dissimilar Metal Welded Joint, Mater. Sci. Eng. A, 2021, 803, p 140482. https://doi.org/10.1016/j.msea.2020.14048210.1016/j.msea.2020.140482 ↗
47. X. Wang, X. Wang, H. Li, H. Wu, Y. Ren, and H. Liu et al., Laves Phase Precipitation Behavior in the Simulated Fine-Grained Heat-Affected Zone of Creep Strength Enhanced Ferritic Steel P92 and its Role in Creep Void Nucleation and Growth, Weld World, 2017, 61, p 231–239. https://doi.org/10.1007/s40194-017-0424-210.1007/s40194-017-0424-2 ↗
48. G. Dak and C. Pandey, A Critical Review on Dissimilar Welds Joint Between Martensitic and Austenitic Steel for Power Plant Application, J. Manuf. Process., 2020, 58, p 377–406. https://doi.org/10.1016/j.jmapro.2020.08.01910.1016/j.jmapro.2020.08.019 ↗
49. K. Bong Yoon, V. Lok, T. Le Giang, Yu.J. Min, Y. Wha Ma, and V. Phu Nguyen et al., Changes in Creep Property and Precipitates Due to Aging of T91 Steel After Long-Term Service, J. Mech. Sci. Technol., 2020, 34, p 2020. https://doi.org/10.1007/s12206-020-0710.1007/s12206-020-07 ↗
50. C.C. Silva, M.H.C. De, M.F. Motta, J.P. Farias, C.R.M. Afonso, and A.J. Ramirez, New Insight on the Solidification Path of an Alloy 625 Weld Overlay, J. Mater. Res. Technol., 2013, 2, p 228–237. https://doi.org/10.1016/j.jmrt.2013.02.00810.1016/j.jmrt.2013.02.008 ↗
51. Y. Zhang, K. Li, Z. Cai, and J. Pan, Creep Rupture Properties of Dissimilar Metal Weld Between Inconel 617B and Modified 9%Cr Martensitic Steel, Mater. Sci. Eng. A, 2019, 764, p 138185. https://doi.org/10.1016/j.msea.2019.13818510.1016/j.msea.2019.138185 ↗