Cyclic Plasticity Constitutive Model for Uniaxial Ratcheting Behavior of AZ31B Magnesium Alloy
Source abstract
Abstract
Investigating the ratcheting behavior of magnesium alloys is significant for the structure’s reliable design. The uniaxial ratcheting behavior of AZ31B magnesium alloy is studied by the asymmetric cyclic stress-controlled experiments at room temperature. A modified kinematic hardening model is established to describe the uniaxial ratcheting behavior of the studied alloy. In the modified model, the material parameter m i is improved as an exponential function of the maximum equivalent stress. The modified model can be used to predict the ratcheting strain evolution of the studied alloy under the single-step and multi-step asymmetric stress-controlled cyclic loadings. Additionally, due to the significant effect of twinning on the plastic deformation of magnesium alloy, the relationship between the material parameter m i and the linear density of twins is discussed. It is found that there is a linear relationship between the material parameter m i and the linear density of twins induced by the cyclic loadings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. X.H. Chen, X. Chen, D. Yu, and B. Gao, Recent Progresses in Experimental Investigation and Finite Element Analysis of Ratcheting in Pressurized Piping, Int. J. Pres. Ves. Pip., 2013, 101, p 113–14210.1016/j.ijpvp.2012.10.008 ↗
2. G.Z. Kang, Ratcheting: Recent Progress in Phenomenon Observation, Constitutive Modeling and Application, Int. J. Fatigue, 2008, 30, p 1448–147210.1016/j.ijfatigue.2007.10.002 ↗
3. Y.C. Lin, X.M. Chen, Z.H. Liu, and J. Chen, Investigation of Uniaxial Low-Cycle Fatigue Failure Behavior of Hot-Rolled AZ91 Magnesium Alloy, Int. J. Fatigue, 2013, 48, p 122–13210.1016/j.ijfatigue.2012.10.010 ↗
4. Y.C. Lin, Z.H. Liu, X.M. Chen, and J. Chen, Stress-based Fatigue Life Prediction Models for AZ31B Magnesium Alloy under Single-Step and Multi-Step Asymmetric Stress-Controlled Cyclic Loadings, Comput. Mater. Sci., 2013, 73, p 128–13810.1016/j.commatsci.2013.02.023 ↗
5. G. Chen, L. Yu, Y.H. Mei, X. Li, X. Chen, and G.Q. Lu, Uniaxial Ratcheting Behavior of Sintered Nanosilver Joint for Electronic Packaging, Mater. Sci. Eng. A, 2014, 591, p 121–12910.1016/j.msea.2013.10.091 ↗
6. N.I.I. Mansor, S. Abdullah, A.K. Ariffin, and J. Syarif, A Review of the Fatigue Failure Mechanism of Metallic Materials under a Corroded Environment, Eng. Fail. Anal., 2014, 42, p 353–36510.1016/j.engfailanal.2014.04.016 ↗
7. K. Dutta and K.K. Ray, Ratcheting Strain in Interstitial Free Steel, Mater. Sci. Eng. A, 2013, 575, p 127–13510.1016/j.msea.2013.02.052 ↗
8. J.L. Chaboche and G. Rousselier, On the Plastic and Viscoplastic Constitutive Equations—Part I: Rules Developed with Internal Variable Concept, J. Press. Vessel. Technol., 1983, 105, p 153–15810.1115/1.3264257 ↗
9. N. Ohno and J.D. Wang, Kinematic Hardening Rules with Critical State of Dynamic Recovery, Part I: Formulation and Basic Features for Ratchetting Behavior, Int. J. Plast., 1993, 9, p 375–39010.1016/0749-6419(93)90042-O ↗
10. N. Ohno and J.D. Wang, Kinematic Hardening Rules with Critical State of Dynamic Recovery, Part II: Application to Experiments of Ratcheting Behavior, Int. J. Plast., 1993, 9, p 391–40310.1016/0749-6419(93)90043-P ↗
11. X. Chen and R. Jiao, Modified Kinematic Hardening Rule for Multiaxial Ratcheting Prediction, Int. J. Plast., 2004, 20, p 871–89810.1016/j.ijplas.2003.05.005 ↗
12. D.J. Yu, G. Chen, W.W. Yu, D.M. Li, and X. Chen, Visco-plastic constitutive Modeling on Ohno-Wang Kinematic Hardening Rule for Uniaxial Ratcheting Behavior Of Z2CND18.12N Steel, Int. J. Plast, 2012, 28, p 88–10110.1016/j.ijplas.2011.06.001 ↗
13. N. Khutia, P.P. Dey, S.K. Paul, and S. Tarafder, Development of Non Masing Characteristic Model for LCF and Ratcheting Fatigue Simulation of SA333 C-Mn Steel, Mech. Mater., 2013, 65, p 88–10210.1016/j.mechmat.2013.05.016 ↗
14. S.K. Paul, S. Sivaprasad, S. Dhar, and S. Tarafder, Key Issues in Cyclic Plastic Deformation: Experimentation, Mech. Mater., 2011, 43, p 705–72010.1016/j.mechmat.2011.07.011 ↗
15. K. Dutta, S. Sivaprasad, S. Tarafder, and K.K. Ray, Influence of Asymmetric Cyclic Loading on Substructure Formation and Ratcheting Fatigue Behaviour of AISI, 304LN Stainless Steel, Mater. Sci. Eng. A, 2010, 527, p 7571–757910.1016/j.msea.2010.07.107 ↗
16. S.K. Paul, S. Sivaprasad, S. Dhar, and S. Tarafder, Cyclic Plastic Deformation and Damage in 304LN Stainless Steel, Mater. Sci. Eng. A, 2011, 528, p 4873–488210.1016/j.msea.2011.03.048 ↗
17. S.K. Paul, S. Sivaprasad, S. Dhar, and S. Tarafder, Ratcheting and Low Cycle Fatigue Behavior of SA333 Steel and Their Life Prediction, J. Nucl. Mater., 2010, 401, p 17–2410.1016/j.jnucmat.2010.03.014 ↗
18. T. Liang, X. Chen, H. Cheng, G. Chen, and X. Ling, Thermal Aging Effect on the Ratcheting Fatigue Behavior of Z2CND18.12N Stainless Steel, Int. J. Fatigue, 2015, 72, p 19–2610.1016/j.ijfatigue.2014.10.014 ↗
19. L. Wang, G. Chen, J.B. Zhu, X.H. Sun, Y.H. Mei, X. Ling, and X. Chen, Bending Ratcheting Behavior of Pressurized Straight Z2CND18.12N Stainless Steel Pipe, Struct. Eng. Mech., 2014, 52, p 1135–115610.12989/sem.2014.52.6.1135 ↗
20. K. Dutta and K.K. Ray, Ratcheting Phenomenon and Post-Ratcheting Tensile Behaviour of an Aluminum Alloy, Mater. Sci. Eng. A, 2012, 540, p 30–3710.1016/j.msea.2012.01.024 ↗
21. T. Liang, Y.F. Liang, J.Y. Fang, G. Chen, and X. Chen, Torsional Fatigue with Axial Constant Stress for Sn-3Ag-0.5Cu Lead-Free Solder, Int. J. Fatigue, 2014, 67, p 203–21110.1016/j.ijfatigue.2014.02.008 ↗
22. G. Chen, Z.S. Zhang, Y.H. Mei, X. Li, D.J. Yu, L. Wang, and X. Chen, Applying Viscoplastic Constitutive Models to Predict Ratcheting Behavior, Mech. Mater., 2014, 72, p 61–7110.1016/j.mechmat.2014.02.001 ↗
23. J. Peng, C.Y. Zhou, Q. Dai, X.H. He, and X.C. Yu, Fatigue and Ratcheting Behaviors of CP-Ti at Room Temperature, Mater. Sci. Eng. A, 2014, 590, p 329–33710.1016/j.msea.2013.10.063 ↗
24. S.K. Paul, P.K. Rana, D. Das, S. Chandra, and S. Kundu, High and Low Cycle Fatigue Performance Comparison Between Micro-Alloyed and TMT Rebar, Constr. Build. Mater., 2014, 54, p 170–17910.1016/j.conbuildmat.2013.12.061 ↗
25. S.K. Paul, S. Majumdar, and S. Kundu, Low Cycle Fatigue Behavior of Thermo Mechanical Treated Rebar, Mater. Des., 2014, 58, p 402–41110.1016/j.matdes.2014.01.079 ↗
26. L. Sahu, A.K. Mishra, and K. Dutta, Ratcheting Behavior of a Non-conventional Stainless Steel and Associated Microstructural Variations, J. Mater. Eng. Perform., 2014, 23, p 4122–412910.1007/s11665-014-1089-2 ↗
27. A.D. Drozdov, Ratcheting of Polypropylene: Constitutive Modeling and Lifetime Prediction, Int. J. Appl. Math. Mech., 2013, 9, p 78–101
28. A.D. Drozdov and C. Jde, Christiansen, cyclic Viscoelastoplasticity of Polypropylene/Nanoclay Hybrids, Comput. Mater. Sci., 2012, 53, p 396–40810.1016/j.commatsci.2011.09.004 ↗
29. Y.C. Lin, X.M. Chen, and J. Zhang, Uniaxial Ratchetting Behavior of Anisotropic Conductive Adhesive Film Under Cyclic Tension, Polym. Test., 2011, 30, p 8–1510.1016/j.polymertesting.2010.10.003 ↗
30. D. Zhang, H. Gao, L. Gao, and J. Ma, Uniaxial Ratcheting Behavior of Hygrothermal Aging Anisotropic Conductive Adhesive Film, Polym. Test., 2013, 32, p 1545–155010.1016/j.polymertesting.2013.09.011 ↗
31. F.J.C. Del Vecchio, J.M.L. Reis, and H.S. da Costa, Mattos, Elasto-viscoplastic Behaviour of Polyester Polymer Mortars under Monotonic and Cyclic Compression, Polym. Test., 2014, 35, p 62–7210.1016/j.polymertesting.2014.02.007 ↗
32. X.M. Chen, Y.C. Lin, and J. Chen, Low-cycle Fatigue Behaviors of Hot-rolled AZ91 Magnesium Alloy Under Asymmetrical Stress-Controlled Cyclic Loadings, J. Alloys Compd., 2013, 579, p 540–54810.1016/j.jallcom.2013.07.049 ↗
33. Y.C. Lin, X.M. Chen, and G. Chen, Uniaxial Ratcheting and Low-cycle Fatigue Failure Behaviors of AZ91D Magnesium Alloy Under Cyclic Tension Deformation, J. Alloys Compd., 2011, 509, p 6838–684310.1016/j.jallcom.2011.03.129 ↗
34. T.S. Srivatsan, C. Godbole, T. Quick, M. Paramsothy, and M. Gupta, Mechanical Behavior of a Magnesium Alloy Nanocomposite under Conditions of Static Tension and Dynamic Fatigue, J. Mater. Eng. Perform., 2013, 22, p 439–45310.1007/s11665-012-0276-2 ↗
35. Y.C. Lin, Z.H. Liu, X.M. Chen, and J. Chen, Uniaxial Ratcheting and Fatigue Failure Behaviors of Hot-Rolled AZ31B Magnesium Alloy under Asymmetrical Cyclic Stress-Controlled Loadings, Mater. Sci. Eng. A, 2013, 573, p 234–24410.1016/j.msea.2013.03.004 ↗
36. J. Deng, Y.C. Lin, J. Chen, S.S. Li, and Y. Ding, Hot tensile Deformation and Fracture Behavior Of AZ31 Magnesium Alloy, Mater. Des., 2013, 49, p 209–21910.1016/j.matdes.2013.01.023 ↗
37. P.S. Roodposhti, A. Sarkar, and K.L. Murty, Microstructural Development of High Temperature Deformed AZ31 Magnesium Alloys, Mater. Sci. Eng. A, 2015, 626, p 195–20210.1016/j.msea.2014.12.064 ↗
38. G.Z. Kang, C. Yu, Y.J. Liu, and G.F. Quan, Uniaxial Ratchetting of Extruded AZ31 Magnesium Alloy: Effect of Mean Stress, Mater. Sci. Eng. A, 2014, 607, p 318–32710.1016/j.msea.2014.04.023 ↗
39. M. Čanađija, X. Guo, D. Lanc, W. Yang, and J. Brnić, Low Cycle Fatigue and Mechanical Properties of Magnesium Alloy Mg-6Zn-1Y-0.6Ce-0.6Zr at Different Temperatures, Mater. Des., 2014, 59, p 287–29510.1016/j.matdes.2014.03.001 ↗
40. C. Yu, G.Z. Kang, and Q.H. Kan, Crystal Plasticity Based Constitutive Model for Uniaxial Ratchetting of Polycrystalline Magnesium Alloy, Comput. Mater. Sci., 2013, 84, p 63–7310.1016/j.commatsci.2013.11.054 ↗
41. Y. Xiong and Y.Y. Jiang, Fatigue of ZK60 Magnesium Alloy Under Uniaxial Loading, Int. J. Fatigue, 2014, 64, p 74–8310.1016/j.ijfatigue.2014.02.019 ↗
42. Y. Xiong, Q. Yu, and Y.Y. Jiang, An Experimental Study of Cyclic Plastic Deformation of Extruded ZK60 Magnesium Alloy Under Uniaxial Loading at Room Temperature, Int. J. Plast., 2014, 53, p 107–12410.1016/j.ijplas.2013.07.008 ↗
43. M. Azadi, G.H. Farrahi, G. Winter, and W. Eichlseder, Fatigue Lifetime of AZ91 Magnesium Alloy Subjected to Cyclic Thermal and Mechanical Loadings, Mater. Des., 2014, 53, p 639–64410.1016/j.matdes.2013.07.075 ↗
44. M. Azadi, G.H. Farrahi, G. Winter, and W. Eichlseder, Thermo-Mechanical Behaviours of Light Alloys in Comparison to High Temperature Isothermal Behaviours, Mater. High Temp., 2014, 31, p 12–1710.1179/0960340913Z.0000000002 ↗
45. S. Dong, Y.Y. Jiang, J. Dong, F.H. Wang, and W.J. Ding, Cyclic Deformation and Fatigue of Extruded ZK60 Magnesium Alloy with Aging Effects, Mater. Sci. Eng. A, 2014, 615, p 262–27210.1016/j.msea.2014.07.074 ↗
46. X.L. He, Y.H. Wei, L.F. Hou, Z.F. Yan, C.L. Guo, and P.J. Han, Corrosion Fatigue Behavior of Epoxy-Coated Mg-3Al-1Zn Alloy in Gear Oil, Trans. Nonferrous Met. Soc. China, 2014, 24, p 3429–344010.1016/S1003-6326(14)63486-5 ↗
47. J. Dallmeier, O. Huber, H. Saage, and K. Eigenfeld, Uniaxial Cyclic Deformation and Fatigue Behavior of AM50 Magnesium Alloy Sheet Metals Under Symmetric and Asymmetric Loadings, Mater. Des., 2015, 70, p 10–3010.1016/j.matdes.2014.12.056 ↗
48. M. Nur-Hossain and F. Taheri, Influence of Elevated Temperature and Stress Ratio on the Fatigue Response of AM60B Magnesium Alloy, J. Mater. Eng. Perform., 2012, 21, p 1395–140410.1007/s11665-011-0019-9 ↗
49. M. Kobayashi and N. Ohno, Implementation of Cyclic Plasticity Models Based on a General Form of Kinematic Hardening, Int. J. Numer. Method Eng., 2002, 53, p 2217–223810.1002/nme.384 ↗