Influence of Surface Tension and Evaporation on Melt Dynamics of Aluminum Alloys for Laser Powder Bed Fusion
Source abstract
Abstract
Abstract One of the most important factors during Laser Powder Bed Fusion is a robust and stable process to generate reproducibly dense and crack-free components with the same homogenous and fine-grained microstructure. Among other factors, surface tension influences the robustness of this process. Three aluminum alloys were investigated by means of 3D laser printing with respect to their ability to form lightweight and high-performance structures. The alloys include two Al-Cr based alloys (Zicromal®: Al-Cr-Zr-Mn, Scancromal®: Al-Cr-Sc-Zr) and an Al-Mg based alloy (Scalmalloy®: Al-Mg-Sc-Mn-Zr). The surface tensions of their liquid melts were measured by means of the oscillating droplet method in electromagnetic levitation. Scalmalloy® exhibited a surface tension that was by 3-8% smaller than the other two alloys, over a temperature range of 500 K above their liquidus temperature; the evaporation analysis showed that Scancromal® exhibits significantly less evaporation compared to the other two alloys by an order of magnitude. During the Laser Powder Bed Fusion process, Scalmalloy® presented the most unstable melt dynamics, and Scancromal® appeared to be more robust and stable with less weld spatters and negligible dust deposition, as evidence from the high-speed video observations. The results support the idea that surface tension and evaporation are potentially crucial factors influencing the melt dynamics and also demonstrate the capability of additive manufacturing that produces customized aluminum alloys for aerospace applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A. Aversa, G. Marchese, A. Saboori, E. Bassini, D. Manfredi, S. Biamino, D. Ugues, P. Fino and M. Lombardi, New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review, Materials, 2019, 12(7), p 1007.10.3390/ma12071007 ↗
2. K. Schmidtke, F. Palm, A. Hawkins and C. Emmelmann, Process and Mechanical Properties: Applicability of a Scandium Modified Al-Alloy for Laser Additive Manufacturing, Phys. Proced., 2011, 12, p 369–374.10.1016/j.phpro.2011.03.047 ↗
3. A.B. Spierings (2018) Powder spreadability and characterization of Sc-and Zr-modified aluminium alloys processed by selective laser melting: quality management system for additive manufacturing. ETH Zurich. https://doi.org/10.3929/ethz-b-00025392410.3929/ethz-b-000253924 ↗
4. A.B. Spierings, K. Dawson, M. Voegtlin, F. Palm and P.J. Uggowitzer, Microstructure and Mechanical Properties of As-Processed Scandium-Modified Aluminium Using Selective Laser Melting, CIRP Ann., 2016, 65(1), p 213–216.10.1016/j.cirp.2016.04.057 ↗
5. K.V. Yang, Y. Shi, F. Palm, X. Wu and P. Rometsch, Columnar to Equiaxed Transition in Al-Mg (-Sc)-Zr Alloys Produced by Selective Laser Melting, Scripta Mater., 2018, 145, p 113–117.10.1016/j.scriptamat.2017.10.021 ↗
6. A.B. Spierings, K. Dawson, P. Dumitraschkewitz, S. Pogatscher and K. Wegener, Microstructure Characterization of SLM-Processed Al-Mg-Sc-Zr Alloy in the Heat Treated and Hiped Condition, Addit. Manuf., 2018, 20, p 173–181.
7. A.B. Spierings, K. Dawson, T. Heeling, P.J. Uggowitzer, R. Schaublin, F. Palm and K. Wegener, Microstructural Features of Sc-and Zr-Modified Al-Mg Alloys Processed by Selective Laser Melting, Mater. Des., 2017, 115, p 52–63.10.1016/j.matdes.2016.11.040 ↗
8. J. Zhang, B. Song, Q. Wei, D. Bourell and Y. Shi, A Review of Selective Laser Melting of Aluminum Alloys: Processing, Microstructure, Property and Developing Trends, J. Mater. Sci. Technol., 2019, 35(2), p 270–284.10.1016/j.jmst.2018.09.004 ↗
9. X.-J. Cao, M. Jahazi, J. Immarigeon and W. Wallace, A Review of Laser Welding Techniques for Magnesium Alloys, J. Mater. Process. Technol., 2006, 171(2), p 188–204.10.1016/j.jmatprotec.2005.06.068 ↗
10. M. Gieseke, C. Noelke, S. Kaierle, V. Wesling, and H. Haferkamp, Selective laser melting of magnesium and magnesium alloys, in Magnesium Technology, Springer, 2013, pp. 65–68. https://doi.org/10.1007/978-3-319-48150-0_1110.1007/978-3-319-48150-0_11 ↗
11. V. Manakari, G. Parande and M. Gupta, Selective Laser Melting of Magnesium and Magnesium Alloy Powders: A Review, Metals, 2017, 7(1), p 2.10.3390/met7010002 ↗
12. C. J. Smithells and E. A. Brandes, Smithells metals reference book, Butterworth, Burlington, 1992
13. S. D. Palm F, Bärtl M and M. A, New tailored high strength & ductile al-alloys for laser powderbed fusion (LPB-F), in 11th CIRP Conference Photonic Technology, 2020
14. G. Schulz, Nanoval Process Offers Fine Powder Benefits, Met. Powder Rep., 1996, 11(51), p 30–33.
15. E. Weidmann and G. Anne, Struer’s Application Notes: Metallographic Preparation of Aluminium and Aluminium Alloys (2016). http://www.struers.com/default.asp?top_id=5&main_id=24&sub_id=176&doc_id=864
16. J. Brillo, G. Lohöfer, F. Schmidt-Hohagen, S. Schneider and I. Egry, Thermophysical Property Measurements of Liquid Metals by Electromagnetic Levitation, Int. J. Mater. Prod. Technol., 2006, 26(3–4), p 247–273.10.1504/IJMPT.2006.009469 ↗
17. J. Brillo, Thermophysical properties of multicomponent liquid alloys. Walter de Gruyter GmbH & Co KG, Berlin, 201610.1515/9783110468991 ↗
18. L. Rayleigh et al., On the Capillary Phenomena of Jets, Proc. R. Soc. London, 1879, 29(196199), p 71–97.
19. D.L. Cummings and D. Blackburn, Oscillations of Magnetically Levitated Aspherical Droplets, J. Fluid Mech., 1991, 224, p 395–416.10.1017/S0022112091001817 ↗
20. K. Yao, X. Min, S. Shi and Y. Tan, Volatilization Behavior of β-Type Ti-Mo Alloy Manufactured by Electron Beam Melting, Metals, 2018, 8(4), p 206.10.3390/met8040206 ↗
21. D. Wu, X. Hua, Y. Ye, L. Huang, F. Li and Y. Huang, Experimental and Numerical Study of Spatter Formation and Composition Change in Fiber Laser Welding of Aluminum Alloy, J. Phys. D Appl. Phys., 2018, 51(18), p 185604.10.1088/1361-6463/aab758 ↗
22. D. Wu, X. Hua, F. Li and L. Huang, Understanding of Spatter Formation in Fiber Laser Welding of 5083 Aluminum Alloy, Int. J. Heat Mass Transf., 2017, 113, p 730–740.10.1016/j.ijheatmasstransfer.2017.05.125 ↗
23. D. Wang, S. Wu, F. Fu, S. Mai, Y. Yang, Y. Liu and C. Song, Mechanisms and Characteristics of Spatter Generation in Slm Processing and Its Effect on the Properties, Mater. Des., 2017, 117, p 121–130.10.1016/j.matdes.2016.12.060 ↗
24. S.A. Khairallah, A.T. Anderson, A. Rubenchik and W.E. King, Laser Powder-Bed Fusion Additive Manufacturing: Physics of Complex Melt Flow and Formation Mechanisms of Pores, Spatter, and Denudation Zones, Acta Mater., 2016, 108, p 36–45.10.1016/j.actamat.2016.02.014 ↗
25. S.A. Khairallah, A.A. Martin, J.R. Lee, G. Guss, N.P. Calta, J.A. Hammons, M.H. Nielsen, K. Chaput, E. Schwalbach, M.N. Shah et al., Controlling Interdependent Meso-Nanosecond Dynamics and Defect Generation in Metal 3d Printing, Science, 2020, 368(6491), p 660–665.10.1126/science.aay7830 ↗
26. G. Champier, Physical metallurgy of aluminium powder alloys. in AGARD, Advisory Group for Aerospace Research and Development, Agard Lecture Series No. 174 New Light Alloys (Les Nouveaux Alliages Legers). North Atlantic Treaty Organization, 1990, p 6E-1–6E-21
27. D. Schimbäck, P. Mair, M. Bärtl, F. Palm, G. Leichtfried, S. Mayer, P.J. Uggowitzer and S. Pogatscher, Alloy Design Strategy for Microstructural-Tailored Scandium-Modified Aluminium Alloys for Additive Manufacturing, Scr. Mater., 2022, 207, p 114277.10.1016/j.scriptamat.2021.114277 ↗
28. B. Keene, Review of Data for the Surface Tension of Pure Metals, Int. Mater. Rev., 1993, 38(4), p 157–192.10.1179/imr.1993.38.4.157 ↗
29. I.F. Bainbridge and J.A. Taylor, The Surface Tension of Pure Aluminum and Aluminum Alloys, Metall. Mater. Trans. A, 2013, 44(8), p 3901–3909.10.1007/s11661-013-1696-9 ↗
30. I. Langmuir, Vapor Pressures, Evaporation, Condensation and Adsorption, J. Am. Chem. Soc., 1932, 54(7), p 2798–2832.10.1021/ja01346a022 ↗
31. J. Lee and D.M. Matson, Prediction of Mass Evaporation of Fe50Co50 During Measurements of Thermophysical Properties Using an Electrostatic Levitator, Int. J. Thermophys., 2014, 35(9–10), p 1697–1704.10.1007/s10765-014-1662-9 ↗
32. J. Nawer, X. Xiao, M. SanSoucie and D.M. Matson, Effect of Mass Evaporation on Measurement of Liquid Density of Ni-Based Superalloys Using Ground and Space Levitation Techniques, High Temp. High. Press., 2020, 49, p 17–29.10.32908/hthp.v49.839 ↗
33. J. Nawer, S. Gosse and D.M. Matson, Tracking Evaporation During Levitation Processing of Nickel-Based Superalloys on the ISS, JOM, 2020, 72(9), p 3132–3139.10.1007/s11837-020-04256-8 ↗
34. C. Alcock, V. Itkin and M. Horrigan, Vapour Pressure Equations for the Metallic Elements: 298-2500k, Can. Metall. Q., 1984, 23(3), p 309–313.10.1179/cmq.1984.23.3.309 ↗
35. E. Fromm, Reduction of Metal Evaporation Losses by Inert Gas Atmospheres, Metall. Trans. A, 1978, 9(12), p 1835–1838.10.1007/BF02663416 ↗
36. Spierings, Adriaan Bernardus Powder Spreadability and Characterization of Sc- and Zr-Modified Aluminium Alloys Processed by Selective Laser Melting, Quality Management System for Additive Manufacturing, ETH Zurich, 2018
37. S. Riva, K.V. Yusenko, N.P. Lavery, D.J. Jarvis and S.G.R. Brown, The Scandium Effect in Multicomponent Alloys, Int. Mater. Rev., 2016, 61(3), p 203–228.10.1080/09506608.2015.1137692 ↗
38. L.F. Mondolfo, Al-Zr Aluminum-Zirconium System. in Aluminum Alloys, Elsevier, 1976, pp. 413–41610.1016/B978-0-408-70932-3.50098-X ↗
39. A.B. Shubin and K. Yu Shunyaev, Thermodynamic Calculations of the Interaction of Scandium Halides with Aluminum, Russ. J. Phys. Chem. A, 2010, 84(12), p 2011–2016.10.1134/S0036024410120010 ↗
40. T. Lienert, T. Siewert, S. Babu, V. Acoff and S.W.P. Specifications, ASM handbook, volume 6A: welding fundamentals and processes, ASM International Materials Park, Ohio, 2011.10.31399/asm.hb.v06a.9781627081740 ↗
41. J. E. Hatch et al., Aluminum: properties and physical metallurgy. ASM International, OH (1984)
42. A. Felsing and P. Woizeschke, Influence of Magnesium on Spatter Behavior in Laser Deep Penetration Welding of Aluminum Alloys, J. Manuf. Mater. Process., 2019, 3(3), p 71.
43. M. Klassen, Prozessdynamik und resultierende Prozessinstabilit¨aten beim Laserstrahlschweißen von Aluminiumlegierungen. BIAS, Bremen (2000)
44. J. Berkmanns, Steigerung der Prozessstabilität beim Laserstrahlschweißen von Aluminiumwerkstoffen mit Strahlleistungen bis 6 kW und Tragverhalten der Verbindungen, Universität Aachen, doctoral thesis (1997)
45. T. Forsman, Laser welding of aluminum alloys, Lulea University of Technology, doctoral thesis, (2000)
46. D. Altenpohl, Aluminum and aluminum alloys, Springer, Berlin Heidelberg, 1965.
47. A. Dinsdale and P. Quested, The Viscosity of Aluminium and Its Alloys-A Review of Data and Models, J. Mater. Sci., 2004, 39(24), p 7221–7228.10.1023/B:JMSC.0000048735.50256.96 ↗