Effect of Surface Treatment on High-Temperature Oxidation Behavior of IN 713C
Source abstract
Abstract
The effects of surface preparations on oxidation kinetics and oxide scale morphology for the commercially available Ni-based superalloy IN 713C have been investigated. The ground and polished samples were exposed in air at 800-1100 °C. The ground specimens were found to demonstrate lower oxidation kinetics compared to those after polishing. The grinding also affected the oxide scale morphology, resulting in a protective alumina scale, while the polished samples developed Ni-/Cr-rich mixed oxides on the surface. Better oxidation resistance of the ground surfaces is related to a higher concentration of defects in the near-surface region introduced by cold working. These defects facilitate the outward transport of the scale-forming element Al and thus are beneficial for protective oxidation. The oxidation mechanism at lower temperatures was introduced. The model based on the generalized Darken method and multiphase approximation was proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. J.R. Davis, ASM Speciality Handbook, Heat Resistant Materials, ASM International, Materials Park, OH, 1997
2. R. Prescott and M.J. Graham, The Formation of Aluminum Oxide Scales on High-Temperature Alloys, Oxid. Met., 1992, 38(3/4), p 233–25410.1007/BF00666913 ↗
3. C.S. Giggins and F.S. Pettit, Oxidation of Ni-Cr-Al Alloys Between 1100 °C and 1200 °C, Solid State Science, 1971, 118(11), p 1782–1790
4. D.J. Young, High Temperature Oxidation and Corrosion of Metals, Elsevier Ltd, Amsterdam. ISSN: 1875-9491 (2008)
5. N. Birks, G.H. Meier, and F.S. Petit, Introduction to the High-Temperature Oxidation of Metals, Cambridge University Press, Cambridge, 200610.1017/CBO9781139163903 ↗
6. K. Yuan, R. Eriksson, R.L. Peng, X.-H. Li, S. Johansson, and Y.-D. Wang, Modelling of Microstructural Evolution and Lifetime Prediction of MCrAlY Coatings on Nickel Based Superalloys During High Temperature Oxidation, Surf. Coat. Technol., 2013, 232, p 204–21510.1016/j.surfcoat.2013.05.008 ↗
7. M.J. Pomeroy, Coatings for Gas Turbine Materials and Long Term Stability Issues, Mater. Des., 2005, 26, p 223–23110.1016/j.matdes.2004.02.005 ↗
8. K.H. Stern, Metallurgical and Ceramic Protective Coatings, Chapman and Hall, London, 199610.1007/978-94-009-1501-5 ↗
9. R. Pillai, A. Chyrkin, D. Grüner, W. Nowak, W.J. Quadakkers, N. Zheng, and A. Kliewe, Carbides in an Aluminised Single Crystal Superalloy: Tracing the Source of Carbon, Surf. Coat. Technol., 2016, 288, p 15–2410.1016/j.surfcoat.2015.12.066 ↗
10. R. Pillai, M.P. Taylor, T. Galiullin, A. Chyrkin, E. Wessel, H. Evans, and W.J. Quadakkers, Predicting the Microstructural Evolution in a Multi-layered Corrosion Resistant Coating on a Ni-Base Superalloy, Mater. High Temp., 2018, 35, p 78–8810.1080/09603409.2017.1396650 ↗
11. S. Mrowec and T. Werber, Korozja Gazowa Tworzyw Metalicznych, Wydawnictwo “Śląsk”, Katowice, 1965
12. C.S. Giggins and F.S. Pettit, The effect of Alloy Grain-Size and Surface Deformation on the Selective Oxidation of Chromium in Ni-Cr Alloys at Temperatures of 900 °C and 1100 °C, Trans. Metall. Soc. AIME, 1969, 245, p 2509–2514
13. S. Leistikow, I. Wolf, and H.J. Grabke, Effect of Cold Work on the Oxidation Behavior and Carburization Resistance of Alloy 800, Werkst. Korros., 1987, 38, p 556–56210.1002/maco.19870381003 ↗
14. C.K. Sudbrack, D.L. Beckett, and R.A. Mackay, Effect of Surface Preparation on the 815 °C Oxidation of Single Crystal Ni-Based Superalloys, JOM, 2015, 67(11), p 2589–259810.1007/s11837-015-1639-6 ↗
15. J.P. Pfeifer, H. Holzbrecher, W.J. Quadakkers, and J. Speier, Quantitative Analysis of Oxide Films on ODS*-Alloys Using MCs+-SIMS and e-Beam SNMS**, J. Anal. Chem., 1993, 346, p 186–191
16. W.J. Quadakkers, A. Elschner, W. Speier, and H. Nickel, Composition and Growth Mechanisms of Alumina Scales on FeCrAl-Based Alloys Determined by SNMS, App. Surf. Sci., 1991, 52, p 271–28710.1016/0169-4332(91)90069-V ↗
17. J. Wojciech, Nowak: Characterization of Oxidized Ni-Base Superalloys by GD-OES, JAAS, 2017, 32, p 1730–1738
18. M. Danielewski and B. Wierzba, Thermodynamically Consistent bi-Velocity Mass Transport Phenomenology, Acta Mater., 2010, 58, p 671710.1016/j.actamat.2010.08.037 ↗
19. F. Binczyk and J. Śleziona, Phase Transformations and Microstructure of IN-713C Nickel Superalloy, Arch. Foundry Eng., 2009, 9, p 109–112
20. H. Matysiak, M. Zagorska, A. Balkowiec, B. Adamczyk-Cieslak, R. Cygan, J. Cwajna, J. Nawrocki, and K.J. Kurzydłowski, The Microstructure Degradation of the IN 713C Nickel-Based Superalloy After the Stress Rupture Tests, J. Mater. Eng. Perform., 2014, 23, p 3305–331310.1007/s11665-014-1123-4 ↗
21. J. Safari and S. Nategh, On the Heat Treatment of Rene-80 Nickel-Base Superalloy, J. Mater. Process. Technol., 2006, 176, p 240–25010.1016/j.jmatprotec.2006.03.165 ↗
22. A.G. Eubanks, D.G. Moore, and W.A. Pennington, Effect of Surface Roughness on the Oxidation Rate of Iron, J. Electrochem. Soc., 1962, 109, p 382–38910.1149/1.2425429 ↗
23. A. Jalowicka, W. Nowak, D.J. Young, V. Nischwitz, D. Naumenko, and W.J. Quadakkers, Boron Depletion in a Nickel Base Superalloy Induced by High Temperature Oxidation, Oxid. Met., 2015, 83, p 393–41310.1007/s11085-015-9529-4 ↗
24. W.J. Nowak, D. Naumenko, A. Jałowicka, D.J. Young, V. Nischwitz, and W.J. Quadakkers, Effect of Alloy Composition on the Oxidation-Induced Boron Depletion in Cast Ni-Base Superalloy Components, Mater. Corros., 2017, 68(2), p 171–18510.1002/maco.201608837 ↗
25. B.H. Kear, F.S. Pettit, D.E. Fornwalt, and L.P. Lemaire, On the Transient Oxidation of a Ni-15Cr-6Al Alloy, Oxid. Met., 1971, 3(6), p 557–56910.1007/BF00605003 ↗
26. H.J. Grabke, Oxidation of NiAl and FeAl, Intermetallics, 1999, 7(10), p 1153–115810.1016/S0966-9795(99)00037-0 ↗
27. G.C. Rybicki and J.L. Smialek, Effect of the θ-α-Al2O3 Transformation on the Oxidation Behavior of β-NiAl+Zr, Oxid. Met., 1989, 31(3/4), p 275–30410.1007/BF00846690 ↗
28. D. Young, High Temperature Oxidation and Corrosion of Metals, 2nd ed., Elsevier, Oxford, 2016