Improving Corrosion Resistance and Corrosive Wear Resistance of Aluminum Alloy Drill Pipe by Surface Nanocrystallization and Micro-arc Oxidation
Source abstract
Abstract
To improve the corrosion and wear resistance performance of aluminum alloy drill pipes in geological and petroleum drilling applications, a strengthening coating was prepared on the surface of the 2618 aluminum alloy by combining treatment with ultrasonic cold forging technology (UCFT) and micro-arc oxidation (MAO). The effects of the strengthening coating on the corrosion and wear resistance of the aluminum alloy were evaluated by electrochemical and tribological tests. The results demonstrated that the corrosion and wear resistance of the aluminum alloy were improved by the UCFT and MAO technologies, especially the salt corrosion resistance. The corrosion morphology of the strengthening coating primarily included pitting, micro-cracks and NaCl attachment. In addition, the UCFT + MAO composite coating exhibited the best wear performance. The wear rate of the UCFT + MAO composite coating was lower than that of the aluminum alloy by 94%. The results provided support for this excellent surface treatment technology for the corrosion and wear resistance of aluminum alloy drill pipes, and they also present a feasible evaluation method for drill pipes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. S. Lv and S. Luo, Prospects of Aluminum Alloy Drill Pipe in Tarim Oilfield, Pet. Drill. Tech., 2009, 37, p 74
2. T.N. Yan, W. Xue, and L.U. Chun-Hua, Superiorities of Aluminum Alloy Drilling Pipe and Its Application Prospects in Deep Holes for Geological Exploration, Explor. Eng., 2010, 85, p 616
3. W.C. Maurer, Implement russian aluminum drill pipe and retractable drilling bits into the USA Volume I: Development of aluminum drill pipe in Russia, 1999, pp. 5–18
4. J. Tang, Q. Di, Y. Hu et al., Analysis on dynamic characteristics and wear mechanism of aluminum alloy drill pipe, Acta Pet. Sin., 2010, 31, p 684–688
5. J.H. Sun, J. Liang, Y.Q. Zhang et al., Development of High-Strength Aluminum Alloy Drill Rod and Its Application in Geological Drilling, Explor. Eng., 2011, 1, p 48
6. S.K. Varma and G. Vasquez, Corrosive Wear Behavior of 7075 Aluminum Alloy and Its Composite Containing Al2O3 Particles, J. Mater. Eng. Perform., 2003, 12, p 99–10510.1361/105994903770343547 ↗
7. M. Qian, D. Li, S.B. Liu et al., Corrosion Performance of Laser-Remelted Al-Si Coating on Magnesium Alloy AZ91D, Corros. Sci., 2010, 52, p 3554–356010.1016/j.corsci.2010.07.010 ↗
8. J. Ma, J. Wen, Q. Li, et al. Electrochemical noise analysis of the corrosion behaviors of Al-Zn-In based alloy in NaCl solution, in International Federation for Heat Treatment and Surface Engineering Congress (2012)10.1016/j.phpro.2013.11.065 ↗
9. M.S. Bhuiyan, Y. Mutoh, T. Murai et al., Corrosion Fatigue Behavior of Extruded Magnesium Alloy AZ61 Under Three Different Corrosive Environments, Int. J. Fatigue, 2008, 30, p 1756–176510.1016/j.ijfatigue.2008.02.012 ↗
10. J. Liang, L. Peng, J.H. Sun et al., Development of the Aluminum Alloy Drill Rod and Laboratory Tests, Geol. Explor., 2011, 47, p 304–308
11. Z. Ahmad, Principles of Corrosion Engineering and Corrosion Control 2006, Elsevier, pp. 120–270.10.1016/B978-075065924-6/50005-2 ↗
12. Y. Shimizu, T. Nishimura, and I. Matsushima, Corrosion Resistance of Al-Based Metal Matrix Composites, Mater. Sci. Eng. A, 1995, 198, p 113–11810.1016/0921-5093(95)80065-3 ↗
13. X. Wang, J. Guo, X. Guo et al., Research Progress on the Material, Characteristics and Wear of Aluminum Alloy Drilling Rods, Mater. Rev., 2014, 15, p 8
14. K. Lu, Nanocrystalline Metals Crystallized from Amorphous Solids: Nanocrystallization, Structure, and Properties, Mater. Sci. Eng. R Rep., 1996, 16, p 161–22110.1016/0927-796X(95)00187-5 ↗
15. Y. Gu, L. Chen, W. Yue et al., Corrosion Behavior and Mechanism of MAO Coated Ti6Al4V with a Grain-Fined Surface Layer, J. Alloys Compd., 2016, 664, p 770–77610.1016/j.jallcom.2015.12.108 ↗
16. L. Wen, Y. Wang, Y. Zhou et al., Iron-Rich Layer Introduced by SMAT and Its Effect on Corrosion Resistance and Wear Behavior of 2024 Al Alloy, Mater. Chem. Phys., 2011, 126, p 301–30910.1016/j.matchemphys.2010.11.022 ↗
17. L. Wen, Y. Wang, Y. Zhou et al., Microstructure and Corrosion Resistance of Modified 2024 Al Alloy Using Surface Mechanical Attrition Treatment Combined with Microarc Oxidation Process, Corros. Sci., 2011, 53, p 473–48010.1016/j.corsci.2010.09.061 ↗
18. L. Wen, Y. Yuan, Y. Wang et al., Effect of Nanocrystalline Surface and Iron-Containing Layer Obtained by SMAT on Tribological Properties of 2024 Al Alloy, Rare Met. Mater. Eng., 2015, 44, p 1320–132510.1016/S1875-5372(15)30082-5 ↗
19. C.Y. Cui, X.G. Cui, Q. Zhao et al., Simulation, Microstructure and Microhardness of the Nano-SiC Coating Formed on Al Surface Via Laser Shock Processing, Mater. Des., 2014, 62, p 217–22410.1016/j.matdes.2014.05.027 ↗
20. F.Z. Dai, J.Z. Lu, Y.K. Zhang et al., Effect of Initial Surface Topography on the Surface Status of LY2 Aluminum Alloy Treated by Laser Shock Processing, Vacuum, 2012, 86, p 1482–148710.1016/j.vacuum.2012.02.001 ↗
21. Y.-J. Han, F.-X. Ye, K.-Y. Ding et al., Effects of Supersonic Fine Particles Bombarding on Thermal Barrier Coatings After Isothermal Oxidation, Trans. Nonferrous Met. Soc. China, 2012, 22, p 1629–163710.1016/S1003-6326(11)61366-6 ↗
22. Y. Gu, H. Ma, W. Yue et al., Microstructure and Corrosion Model of MAO Coating on Nano Grained AA2024 Pretreated by Ultrasonic Cold Forging Technology, J. Alloys Compd., 2016, 681, p 120–12710.1016/j.jallcom.2016.03.196 ↗
23. M.A. Chen, S.Y. Liu, J.M. Li et al., Improvement to Corrosion Resistance of MAO Coated 2519 Aluminum Alloy by Formation of Polypropylene Film on Its Surface, Surf. Coat. Technol., 2013, 232, p 674–67910.1016/j.surfcoat.2013.06.073 ↗
24. H.Y. Ding, Z.D. Dai, S.C. Skuiry et al., Corrosion Wear Behaviors of Micro-arc Oxidation Coating of Al2O3 on 2024Al in Different Aqueous Environments at Fretting Contact, Tribol. Int., 2010, 43, p 868–87510.1016/j.triboint.2009.12.022 ↗
25. C. Li, D. Liu, Z. Ye et al., Effect of the Micro-arc Oxidation and Cerium Salt Sealing on the Corrosion and Wear Resistance of New 7A85, Mech. Sci. Technol. Aerospace Eng., 2014, 33, p 127–132
26. Y. Tang, J.Y. Xu, F.Y. Ye et al., Antiwear Behavior of Micro-arc Oxidated Coating Rubbing on Abrasive Paper, Mater. Sci. Forum, 2011, 704–705, p 1210–121510.4028/www.scientific.net/MSF.704-705.1210 ↗
27. P. Yi, W. Yue, J. Liang et al., Effects of Nanocrystallized Layer on the Tribological Properties of Micro-arc Oxidation Coatings on 2618 Aluminum Alloy Under High Temperatures, Int. J. Adv. Manuf. Technol., 2017, 1, p 1–12
28. D. Ahn, Y. He, Z. Wan et al., Effect of Ultrasonic Nano-crystalline Surface Modification on the Microstructural Evolution and Mechanical Properties of Al5052 Alloy, Surf. Interface Anal., 2012, 44, p 1415–141710.1002/sia.4959 ↗
29. B. Chen, B. Huang, H. Liu et al., Surface Nanocrystallization Induced by Shot Peening and Its Effect on Corrosion Resistance of 6061 Aluminum Alloy, J. Mater. Res., 2014, 29, p 3002–301010.1557/jmr.2014.323 ↗
30. J. Liang, W. Yue, J.H. Sun et al., High Temperature Tribological Properties of Aluminum Alloy Drill Pipe Processed by Ultrasonic Surface Rolling, China Surf. Eng., 2016, 225, p 19
31. J. Liu, W. Yue, J. Liang et al., Effects of Evaluated Temperature on Tribological Behaviors of Micro-arc Oxidated 2219 Aluminum Alloy and Their Field Application, Int. J. Adv. Manuf. Technol., 2017, 1, p 1–16
32. J. Tian, Z. Luo, S. Qi et al., Structure and Antiwear Behavior of Micro-arc Oxidized Coatings on Aluminum Alloy, Surf. Coat. Technol., 2002, 154, p 1–710.1016/S0257-8972(01)01671-1 ↗