A Review on Micro- and Nanoscratching/Tribology at High Temperatures: Instrumentation and Experimentation
Source abstract
Abstract
High-temperature micro-/nanomechanics has attracted much interest over the last decade, primarily because of the urgent need to understand the mechanical and tribological properties of advanced engineering materials at micro-/nanoscale and the underlying physics controlling such properties at operationally relevant conditions. Recent years have subsequently witnessed the swift growth and development of new high-temperature micro- and nanoscratching/tribology instruments. Here, we present an overview of fundamental principles and developments in these instruments, discuss pertinent findings on the topic in detail, and outline current challenges and promising future directions in the field.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. R.W. Carpick and M. Salmeron, Scratching the Surface: Fundamental Investigations of Tribology with Atomic Force Microscopy, Chem. Rev., 1997, 97, p 1163–119410.1021/cr960068q ↗
2. R. Consiglio, N. Randall, B. Bellaton, and J. Von Stebut, The Nano-Scratch Tester (NST) as a New Tool for Assessing the Strength of Ultrathin Hard Coatings and the Mar Resistance of Polymer Films, Thin Solid Films, 1998, 332, p 151–15610.1016/S0040-6090(98)00987-0 ↗
3. T. Tsui, G. Pharr, W. Oliver, Y. Chung, E. Cutiongco, C. Bhatia, R. White, R. Rhoades, and S. Gorbatkin, Nanoindentation and Nanoscratching of Hard Coating Materials for Magnetic Disks, MRS Proceedings, Cambridge Univ Press, 1994.10.2172/34426 ↗
4. B. Beake, A. Harris, and T. Liskiewicz, Review of Recent Progress in Nanoscratch Testing, Tribol. Mater. Surf. Interfaces, 2013, 7, p 87–9610.1179/1751584X13Y.0000000037 ↗
5. S.Z. Chavoshi, S. Goel, and X. Luo, Molecular Dynamics Simulation Investigation on the Plastic Flow Behaviour of Silicon During Nanometric Cutting, Modell. Simul. Mater. Sci. Eng., 2015, 24, p 01500210.1088/0965-0393/24/1/015002 ↗
6. S.Z. Chavoshi, S. Goel, and X. Luo, Influence of Temperature on the Anisotropic Cutting Behaviour of Single Crystal Silicon: A Molecular Dynamics Simulation Investigation, J. Manuf. Process., 2016, 23, p 201–21010.1016/j.jmapro.2016.06.009 ↗
7. S.Z. Chavoshi and X. Luo, An Atomistic Simulation Investigation on Chip Related Phenomena in Nanometric Cutting of Single Crystal Silicon at Elevated Temperatures, Comput. Mater. Sci., 2016, 113, p 1–1010.1016/j.commatsci.2015.11.027 ↗
8. S.Z. Chavoshi and X. Luo, Molecular Dynamics Simulation Study of Deformation Mechanisms in 3C-SiC During Nanometric Cutting at Elevated Temperatures, Mater. Sci. Eng. A, 2016, 654, p 400–41710.1016/j.msea.2015.11.100 ↗
9. S.Z. Chavoshi and X. Luo, Atomic-Scale Characterization of Occurring Phenomena During Hot Nanometric Cutting of Single Crystal 3C-SiC, RSC Adv., 2016, 6, p 71409–7142410.1039/C6RA05830B ↗
10. S.Z. Chavoshi, S. Xu, and X. Luo, Dislocation-Mediated Plasticity in Silicon During Nanometric Cutting: A Molecular Dynamics Simulation Study, Mater. Sci. Semicond. Process., 2016, 51, p 60–7010.1016/j.mssp.2016.05.003 ↗
11. S.Z. Chavoshi and S. Xu, Temperature-Dependent Nanoindentation Response of Materials, MRS Commun., 2018, 8, p 15–2810.1557/mrc.2018.19 ↗
12. A. Vakis, V. Yastrebov, J. Scheibert, C. Minfray, L. Nicola, D. Dini, A. Almqvist, M. Paggi, S. Lee, and G. Limbert, Modeling and Simulation in Tribology Across Scales: An Overview, Tribol. Int., 2018, https://doi.org/10.1016/j.triboint.2018.02.0010.1016/j.triboint.2018.02.00 ↗
13. S.Z. Chavoshi and S. Xu, Nanoindentation/Scratching at Finite Temperatures: Insights from Atomistic-Based Modeling. Submitted, (2018).10.1016/j.pmatsci.2018.09.002 ↗
14. D. Lucca, K. Herrmann, and M. Klopfstein, Nanoindentation: Measuring Methods and Applications, CIRP Ann. Manuf. Technol., 2010, 59, p 803–81910.1016/j.cirp.2010.05.009 ↗
15. A. Gouldstone, N. Chollacoop, M. Dao, J. Li, A.M. Minor, and Y.-L. Shen, Indentation Across Size Scales and Disciplines: Recent Developments in Experimentation and Modeling, Acta Mater., 2007, 55, p 4015–403910.1016/j.actamat.2006.08.044 ↗
16. W.C. Oliver and G.M. Pharr, Measurement of Hardness and Elastic Modulus by Instrumented Indentation: Advances in Understanding and Refinements to Methodology, J. Mater. Res., 2004, 19, p 3–2010.1557/jmr.2004.19.1.3 ↗
17. M.R. VanLandingham, Review of Instrumented Indentation, J. Res. Natl. Inst. Stand. Technol., 2003, 108, p 24910.6028/jres.108.024 ↗
18. Y.I. Golovin, Nanoindentation and Mechanical Properties of Solids in Submicrovolumes, Thin Near-Surface Layers, and Films: A Review, Phys. Solid State, 2008, 50, p 2205–223610.1134/S1063783408120019 ↗
19. C.A. Schuh, Nanoindentation Studies of Materials, Mater. Today, 2006, 9, p 32–4010.1016/S1369-7021(06)71495-X ↗
20. X. Li and B. Bhushan, A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its Applications, Mater. Charact., 2002, 48, p 11–3610.1016/S1044-5803(02)00192-4 ↗
21. A.C. Fischer-Cripps, Critical Review of Analysis and Interpretation of Nanoindentation Test Data, Surf. Coat. Technol., 2006, 200, p 4153–416510.1016/j.surfcoat.2005.03.018 ↗
22. S.R. Cohen and E. Kalfon-Cohen, Dynamic Nanoindentation by Instrumented Nanoindentation and Force Microscopy: A Comparative Review, Beilstein J. Nanotechnol., 2013, 4, p 815–83310.3762/bjnano.4.93 ↗
23. E. Broitman, Indentation Hardness Measurements at Macro-, Micro-, and Nanoscale: A Critical Overview, Tribol. Lett., 2017, 65, p 2310.1007/s11249-016-0805-5 ↗
24. B. Bhushan and X. Li, Nanomechanical Characterisation of Solid Surfaces and Thin Films, Int. Mater. Rev., 2003, 48, p 125–16410.1179/095066003225010227 ↗
25. A. Atkins and D. Tabor, Hardness and Deformation Properties of Solids at Very High Temperatures, Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences, The Royal Society, 1966.
26. B. Lucas and W. Oliver, Time Dependent Indentation Testing at Non-ambient Temperatures Utilizing the High Temperature Mechanical Properties Microprobe, MRS Proceedings, Cambridge Univ Press, 1994.10.1557/PROC-356-645 ↗
27. W. Poisl, W. Oliver, and B. Fabes, The Relationship Between Indentation and Uniaxial Creep in Amorphous Selenium, J. Mater. Res., 1995, 10, p 2024–203210.1557/JMR.1995.2024 ↗
28. T. Suzuki and T. Ohmura, Ultra-Microindentation of Silicon at Elevated Temperatures, Philos. Mag. A, 1996, 74, p 1073–108410.1080/01418619608239708 ↗
29. S. Syed Asif and J. Pethica, Nano-scale Indentation Creep Testing at Non-ambient Temperature, J. Adhes., 1998, 67, p 153–16510.1080/00218469808011105 ↗
30. J. Smith and S. Zheng, High Temperature Nanoscale Mechanical Property Measurements, Surf. Eng., 2000, 16, p 143–14610.1179/026708400101517044 ↗
31. A.A. Volinsky, N.R. Moody, and W.W. Gerberich, Nanoindentation of Au and Pt/Cu Thin Films at Elevated Temperatures, J. Mater. Res., 2004, 19, p 2650–265710.1557/JMR.2004.0331 ↗
32. J.C. Trenkle, C.E. Packard, and C.A. Schuh, Hot Nanoindentation in Inert Environments, Rev. Sci. Instrum., 2010, 81, p 073901–07391410.1063/1.3436633 ↗
33. I. Cheng, E. Garcia-Sanchez, and A. Hodge, Note: A Method for Minimizing Oxide Formation During Elevated Temperature Nanoindentation, Rev. Sci. Instrum., 2014, 85, p 09610610.1063/1.4895006 ↗
34. S. Korte, R.J. Stearn, J.M. Wheeler, and W.J. Clegg, High Temperature Microcompression and Nanoindentation in Vacuum, J. Mater. Res., 2012, 27, p 167–17610.1557/jmr.2011.268 ↗
35. J. Wheeler, D. Armstrong, W. Heinz, and R. Schwaiger, High Temperature Nanoindentation: The State of the Art and Future Challenges, Curr. Opin. Solid State Mater. Sci., 2015, 19, p 354–36610.1016/j.cossms.2015.02.002 ↗
36. N. Everitt, M. Davies, and J. Smith, High Temperature Nanoindentation—The Importance of Isothermal Contact, Philos. Mag., 2011, 91, p 1221–124410.1080/14786435.2010.496745 ↗
37. H. Lee, Y. Chen, A. Claisse, and C. Schuh, Finite Element Simulation of Hot Nanoindentation in Vacuum, Exp. Mech., 2013, 53, p 1201–121110.1007/s11340-012-9700-7 ↗
38. J. Wheeler, P. Brodard, and J. Michler, Elevated Temperature, In Situ Indentation with Calibrated Contact Temperatures, Philos. Mag., 2012, 92, p 3128–314110.1080/14786435.2012.674647 ↗
39. X. Hou, C. Alvarez, and N. Jennett, Establishing Isothermal Contact at a Known Temperature Under Thermal Equilibrium in Elevated Temperature Instrumented Indentation Testing. Meas. Sci. Technol., 2017, 28, p 02501610.1088/1361-6501/aa533d ↗
40. J. Wheeler and J. Michler, Elevated Temperature, Nano-mechanical Testing In Situ in the Scanning Electron Microscope, Rev. Sci. Instrum., 2013, 84, p 045103–04511810.1063/1.4795829 ↗
41. C.A. Schuh, C.E. Packard, and A.C. Lund, Nanoindentation and Contact-Mode Imaging at High Temperatures, J. Mater. Res., 2006, 21, p 725–73610.1557/jmr.2006.0080 ↗
42. C.E. Packard, J.M. Wheeler, J.C. Trenkle, and C.A. Schuh, Nanoindentation: High Temperature, Ref. Modul. Mater. Sci. Mater. Eng., 2016.10.1016/B978-0-12-803581-8.03389-0 ↗
43. C. Schuh, J. Mason, A. Lund, and A. Hodge, High Temperature Nanoindentation for the Study of Flow Defects, MRS Proceedings, Cambridge Univ Press, 2004.10.1557/PROC-841-R4.8 ↗
44. J. Smith, V. Vishnyakov, M. Davies, and B. Beake, Nanoscale Friction Measurements Up to 750 °C, Tribol. Lett., 2013, 49, p 455–46310.1007/s11249-013-0102-5 ↗
45. M. Varga, M. Flasch, and E. Badisch, Introduction of a Novel Tribometer Especially Designed for Scratch, Adhesion and Hardness Investigation Up to 1000 °C, Proc. Inst. Mech. Eng. Part J J. Eng. Tribol., 2017, 231, p 469–47810.1177/1350650115592918 ↗
46. S. Leroch, M. Varga, S. Eder, A. Vernes, M.R. Ripoll, and G. Ganzenmüller, Smooth Particle Hydrodynamics Simulation of Damage Induced by a Spherical Indenter Scratching a Viscoplastic Material, Int. J. Solids Struct., 2016, 81, p 188–20210.1016/j.ijsolstr.2015.11.025 ↗
47. S. Smith, D. Chetwynd, and D. Bowen, Design and Assessment of Monolithic High Precision Translation Mechanisms, J. Phys. E Sci. Instrum., 1987, 20, p 97710.1088/0022-3735/20/8/005 ↗
48. M. Gee, J. Nunn, A. Muniz-Piniella, and L. Orkney, Micro-tribology Experiments on Engineering Coatings, Wear, 2011, 271, p 2673–268010.1016/j.wear.2011.02.031 ↗
49. A. Gant, J. Nunn, M. Gee, D. Gorman, D. Gohil, and L. Orkney, New Perspectives in Hardmetal Abrasion Simulation, Wear, 2017, 376, p 2–1410.1016/j.wear.2017.01.038 ↗
50. J. Wheeler and J. Michler, Invited Article: Indenter Materials for High Temperature Nanoindentation, Rev. Sci. Instrum., 2013, 84, p 10130110.1063/1.4824710 ↗
51. W. Kang, M. Merrill, and J.M. Wheeler, In Situ Thermomechanical Testing Methods for Micro/Nano-scale Materials, Nanoscale, 2017, 9, p 266610.1039/C6NR07330A ↗
52. S.Z. Chavoshi, S.C. Gallo, H. Dong, and X. Luo, High Temperature Nanoscratching of Single Crystal Silicon Under Reduced Oxygen Condition, Mater. Sci. Eng. A, 2017, 684, p 385–39310.1016/j.msea.2016.11.097 ↗
53. H. Mohammadi, D. Ravindra, S.K. Kode, and J.A. Patten, Experimental Work on Micro Laser-Assisted Diamond Turning of Silicon (111), J. Manuf. Process., 2015, 19, p 125–12810.1016/j.jmapro.2015.06.007 ↗
54. J. Pujante, M. Vilaseca, D. Casellas, and M.D. Riera, High Temperature Scratch Testing of Hard PVD Coatings Deposited on Surface Treated Tool Steel, Surf. Coat. Technol., 2014, 254, p 352–35710.1016/j.surfcoat.2014.06.040 ↗
55. J. Batista, C. Godoy, V. Buono, and A. Matthews, Characterisation of Duplex and Non-duplex (Ti, Al) N and Cr-N PVD Coatings, Mater. Sci. Eng. A, 2002, 336, p 39–5110.1016/S0921-5093(01)01953-0 ↗
56. J. Batista, C. Godoy, G. Pintaúde, A. Sinatora, and A. Matthews, An Approach to Elucidate the Different Response of PVD Coatings in Different Tribological Tests, Surf. Coat. Technol., 2003, 174, p 891–89810.1016/S0257-8972(03)00351-7 ↗
57. D. Allsopp and I. Hutchings, Micro-scale Abrasion and Scratch Response of PVD Coatings at Elevated Temperatures, Wear, 2001, 251, p 1308–131410.1016/S0043-1648(01)00755-4 ↗
58. G. Fox-Rabinovich, J. Endrino, B. Beake, A. Kovalev, S. Veldhuis, L. Ning, F. Fontaine, and A. Gray, Impact of Annealing on Microstructure, Properties and Cutting Performance of an AlTiN Coating, Surf. Coat. Technol., 2006, 201, p 3524–352910.1016/j.surfcoat.2006.08.075 ↗
59. G. Fox-Rabinovich, B. Beake, J. Endrino, S. Veldhuis, R. Parkinson, L. Shuster, and M. Migranov, Effect of Mechanical Properties Measured at Room and Elevated Temperatures on the Wear Resistance of Cutting Tools with TiAlN and AlCrN Coatings, Surf. Coat. Technol., 2006, 200, p 5738–574210.1016/j.surfcoat.2005.08.132 ↗
60. W. Tillmann, D. Kokalj, D. Stangier, M. Paulus, C. Sternemann, and M. Tolan, Investigation on the Oxidation Behavior of AlCrVxN Thin Films by Means of Synchrotron Radiation and Influence on the High Temperature Friction, Appl. Surf. Sci., 2018, 427, p 511–52110.1016/j.apsusc.2017.09.029 ↗
61. W. Tillmann, D. Kokalj, D. Stangier, M. Paulus, C. Sternemann, and M. Tolan, Investigation of the Influence of the Vanadium Content on the High Temperature Tribo-Mechanical Properties of DC Magnetron Sputtered AlCrVN Thin Films, Surf. Coat. Technol., 2017, 328, p 172–18110.1016/j.surfcoat.2017.08.046 ↗
62. M. Varga, S. Leroch, H. Rojacz, and M.R. Ripoll, Study of Wear Mechanisms at High Temperature Scratch Testing, Wear, 2017, 388, p 11210.1016/j.wear.2017.04.027 ↗
63. B. He, G. Ghosh, Y.-W. Chung, and Q. Wang, Effect of Melting and Microstructure on the Microscale Friction of Silver-Bismuth Alloys, Tribol. Lett., 2010, 38, p 275–28210.1007/s11249-010-9606-4 ↗
64. H. Rojacz, G. Mozdzen, F. Weigel, and M. Varga, Microstructural Changes and Strain Hardening Effects in Abrasive Contacts at Different Relative Velocities and Temperatures, Mater. Charact., 2016, 118, p 370–38110.1016/j.matchar.2016.05.027 ↗
65. J. Williams, Analytical Models of Scratch Hardness, Tribol. Int., 1996, 29, p 675–69410.1016/0301-679X(96)00014-X ↗
66. S. Graça, R. Colaço, and R. Vilar, Micro-to-nano Indentation and Scratch Hardness in the Ni-Co System: Depth Dependence and Implications for Tribological Behavior, Tribol. Lett., 2008, 31, p 17710.1007/s11249-008-9350-1 ↗
67. V. Domnich, Y. Aratyn, W.M. Kriven, and Y. Gogotsi, Temperature Dependence of Silicon Hardness: Experimental Evidence of Phase Transformations, Rev. Adv. Mater. Sci., 2008, 17, p 33–41
68. S. Ruffell, J. Bradby, and J.S. Williams, Annealing Kinetics of Nanoindentation-Induced Polycrystalline High Pressure Phases in Crystalline Silicon, Appl. Phys. Lett., 2007, 90, p 131901–13190410.1063/1.2716854 ↗
69. Z. Zeng, Q. Zeng, W.L. Mao, and S. Qu, Phase Transitions in Metastable Phases of Silicon, J. Appl. Phys., 2014, 115, p 103514–10352010.1063/1.4868156 ↗
70. Y.B. Gerbig, C. Michaels, J.E. Bradby, B. Haberl, and R.F. Cook, In Situ Spectroscopic Study of the Plastic Deformation of Amorphous Silicon Under Nonhydrostatic Conditions Induced by Indentation, Phys. Rev. B, 2015, 92, p 21411010.1103/PhysRevB.92.214110 ↗
71. Y.B. Gerbig, C.A. Michaels, and R.F. Cook, In Situ Observation of the Spatial Distribution of Crystalline Phases During Pressure-Induced Transformations of Indented Silicon Thin Films, J. Mater. Res., 2015, 30, p 390–40610.1557/jmr.2014.316 ↗
72. Y. Gerbig, C. Michaels, A. Forster, J. Hettenhouser, W. Byrd, D. Morris, and R. Cook, Indentation Device for In Situ Raman Spectroscopic and Optical Studies, Rev. Sci. Instrum., 2012, 83, p 12510610.1063/1.4769995 ↗
73. Y.B. Gerbig, C.A. Michaels, and R.F. Cook, In Situ Observations of Berkovich Indentation Induced Phase Transitions in Crystalline Silicon Films, Scripta Mater., 2016, 120, p 19–2210.1016/j.scriptamat.2016.04.007 ↗
74. Y. Gerbig, C. Michaels, A. Forster, and R. Cook, In Situ Observation of the Indentation-Induced Phase Transformation of Silicon Thin Films, Phys. Rev. B, 2012, 85, p 10410210.1103/PhysRevB.85.104102 ↗
75. P. Manimunda, E. Hintsala, S. Asif, and M.K. Mishra, Mechanical Anisotropy and Pressure Induced Structural Changes in Piroxicam Crystals Probed by In Situ Indentation and Raman Spectroscopy, JOM, 2017, 69, p 57–6310.1007/s11837-016-2169-6 ↗
76. J. Wheeler, C. Niederberger, C. Tessarek, S. Christiansen, and J. Michler, Extraction of Plasticity Parameters of GaN with High Temperature, In Situ Micro-Compression, Int. J. Plast., 2013, 40, p 140–15110.1016/j.ijplas.2012.08.001 ↗
77. J. Wheeler, R. Raghavan, and J. Michler, In Situ SEM Indentation of a Zr-Based Bulk Metallic Glass at Elevated Temperatures, Mater. Sci. Eng. A, 2011, 528, p 8750–875610.1016/j.msea.2011.08.057 ↗
78. B. Bhushan, Nanotribology and Nanomechanics, Wear, 2005, 259, p 1507–153110.1016/j.wear.2005.01.010 ↗
79. C. Cheung and W. Lee, Characterisation of Nanosurface Generation in Single-Point Diamond Turning, Int. J. Mach. Tools Manuf., 2001, 41, p 851–87510.1016/S0890-6955(00)00102-4 ↗
80. T.G. Bifano, T. Dow, and R. Scattergood, Ductile-Regime Grinding: A New Technology for Machining Brittle Materials, J. Eng. Ind., 1991, 113, p 184–18910.1115/1.2899676 ↗
81. P.N. Blake and R.O. Scattergood, Ductile-Regime Machining of Germanium and Silicon, J. Am. Ceram. Soc., 1990, 73, p 949–95710.1111/j.1151-2916.1990.tb05142.x ↗
82. J. Patten, W. Gao, and K. Yasuto, Ductile Regime Nanomachining of Single-Crystal Silicon Carbide, J. Manuf. Sci. Eng., 2005, 127, p 522–53210.1115/1.1949614 ↗
83. S.Z. Chavoshi and X. Luo, Hybrid Micro-machining Processes: A Review, Precis. Eng., 2015, 41, p 1–2310.1016/j.precisioneng.2015.03.001 ↗
84. S.Z. Chavoshi, S. Goel, and P. Morantz, Current Trends and Future of Sequential Micro-machining Processes on a Single Machine Tool, Mater. Des., 2017, 127, p 37–5310.1016/j.matdes.2017.04.057 ↗
85. D. Ravindra, Ductile Mode Material Removal of Ceramics and Semiconductors, Department of Mechanical and Aeronautical Engineering, Western Michigan University, Michigan, 2011, p 312.
86. D. Ravindra, M.K. Ghantasala, and J. Patten, Ductile Mode Material Removal and High-Pressure Phase Transformation in Silicon During Micro-laser Assisted Machining, Precis. Eng., 2012, 36, p 364–36710.1016/j.precisioneng.2011.12.003 ↗
87. D. Ravindra and J.A. Patten, Chapter 4: Ductile Regime Material Removal of Silicon Carbide(SiC), Silicon Carbide: New Materials, Production Methods and Application, S.H. Vanger, Ed., Nova Publishers, Trivandrum, 2011, p 141–167.
88. A.R. Shayan, H.B. Poyraz, D. Ravindra, M. Ghantasala, and J.A. Patten. Force Analysis, Mechanical Energy and Laser Heating Evaluation of Scratch Tests on Silicon Carbide (4H-SiC) in Micro-Laser Assisted Machining (µ-LAM) Process, ASME 2009 International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2009.10.1115/MSEC2009-84207 ↗
89. H. Mohammadi and J.A. Patten, Effect of Thermal Softening on Anisotropy and Ductile Mode Cutting of Sapphire Using Micro-laser Assisted Machining, J. Micro Nano Manuf., 2017, 5, p 01100710.1115/1.4035397 ↗
90. B. Beake, J. Endrino, C. Kimpton, G. Fox-Rabinovich, and S. Veldhuis, Elevated Temperature Repetitive Micro-scratch Testing of AlCrN, TiAlN and AlTiN PVD Coatings, Int. J. Refract. Metal. Hard Mater., 2017, 69, p 215–22610.1016/j.ijrmhm.2017.08.017 ↗
91. I. Altfeder and J. Krim, Temperature Dependence of Nanoscale Friction for Fe on YBCO, J. Appl. Phys., 2012, 111, p 09491610.1063/1.4717983 ↗
92. C. Dunckle, I. Altfeder, A. Voevodin, J. Jones, J. Krim, and P. Taborek, Temperature Dependence of Single-Asperity Friction for a Diamond on Diamondlike Carbon Interface, J. Appl. Phys., 2010, 107, p 11490310.1063/1.3436564 ↗
93. F.P. Bowden and D. Tabor, The Friction and Lubrication of Solids, Vol 1, Oxford University Press, Oxford, 200110.1093/oso/9780198507772.001.0001 ↗
94. H. Nili, K. Kalantar-zadeh, M. Bhaskaran, and S. Sriram, In Situ Nanoindentation: Probing Nanoscale Multifunctionality, Prog. Mater Sci., 2013, 58, p 1–2910.1016/j.pmatsci.2012.08.001 ↗
95. N. Browning, M. Bonds, G. Campbell, J. Evans, T. LaGrange, K. Jungjohann, D. Masiel, J. McKeown, S. Mehraeen, and B. Reed, Recent Developments in Dynamic Transmission Electron Microscopy, Curr. Opin. Solid State Mater. Sci., 2012, 16, p 23–3010.1016/j.cossms.2011.07.001 ↗
96. A. Feist, N. Bach, N.R. da Silva, T. Danz, M. Möller, K.E. Priebe, T. Domröse, J.G. Gatzmann, S. Rost, and J. Schauss, Ultrafast Transmission Electron Microscopy Using a Laser-Driven Field Emitter: Femtosecond Resolution with a High Coherence Electron Beam, Ultramicroscopy, 2017, 176, p 63–7310.1016/j.ultramic.2016.12.005 ↗
97. M. Dupraz, G. Beutier, T. Cornelius, G. Parry, Z. Ren, S. Labat, M.-I. Richard, G. Chahine, O. Kovalenko, and M. De Boissieu, 3D Imaging of a Dislocation Loop at the Onset of Plasticity in an Indented Nanocrystal, Nano Lett., 2017, 17, p 669610.1021/acs.nanolett.7b02680 ↗
98. P.L. Stiles, J.A. Dieringer, N.C. Shah, and R.P. Van Duyne, Surface-Enhanced Raman Spectroscopy, Annu. Rev. Anal. Chem., 2008, 1, p 601–62610.1146/annurev.anchem.1.031207.112814 ↗
99. J. Bradby, J. Williams, and M.V. Swain, In Situ Electrical Characterization of Phase Transformations in Si During Indentation, Phys. Rev. B, 2003, 67, p 08520510.1103/PhysRevB.67.085205 ↗
100. N. Fujisawa, S. Ruffell, J. Bradby, J. Williams, B. Haberl, and O. Warren, Understanding Pressure-Induced Phase-Transformation Behavior in Silicon Through In Situ Electrical Probing Under Cyclic Loading Conditions, AIP, 2009, 105, p 106111