Microstructure and Corrosion Behavior of Hot-Deformed and Cold-Strained High-Mn Steels
Source abstract
Abstract
The electrochemical corrosion properties of 26Mn-3Si-3Al and 27Mn-4Si-2Al austenitic steels in two different states were studied in 0.1 M H2SO4 and 3.5% NaCl using potentiodynamic polarization tests. The effect of cold deformation on the microstructure and corrosion behavior of steels was analyzed. In acid solution, both steels exhibited lower corrosion resistance than in chloride solution independently on the steel state (hot-rolled, cold-worked). Cold deformation decreases the corrosion resistance, though this effect is smaller than the effect of chemical composition related to the combined Al + Si addition. All steels showed the evidence of pitting corrosion. The intensive dissolution of Fe and Mn takes place in the acid medium.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A.F. Padilha, I.F. Machado, and R.L. Plaut, Microstructures and Mechanical Properties of Fe–15%Cr–15%Ni Austenitic Stainless Steels Containing Different Levels of Niobium Additions Submitted to Various Processing Stages, J. Mater. Proc. Tech., 2005, 170(1-2), p 89–9610.1016/j.jmatprotec.2005.05.002 ↗
2. M.A.M. Ibrahim, S.S. Abd El Rehim, and M.M. Hamza, Corrosion Behavior of Some Austenitic Stainless Steels in Chloride Environments, Mater. Chem. Phys., 2009, 115(1), p 80–8510.1016/j.matchemphys.2008.11.016 ↗
3. Z.H. Jin, H.H. Ge, W.W. Lin, Y.W. Zong, S.J. Liu, and J.M. Shi, Corrosion Behaviour of 316L Stainless Steel and Anti-Corrosion Materials in a High Acidified Chloride Solution, Appl. Surf. Sci., 2014, 322, p 47–5610.1016/j.apsusc.2014.09.205 ↗
4. G. Frommeyer, U. Brüx, and P. Neumann, Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes, ISIJ Int., 2003, 43(3), p 438–44610.2355/isijinternational.43.438 ↗
5. M. Eskandari, A. Zarei-Hanzaki, A.R. Kamali, M.A. Mohtadi-Bonab, and J.A. Szpunar, Strain Hardening During Hot Compression Through Planar Dislocation and Twin-Like Structure in a Low-Density High-Mn Steel, J. Mater. Eng. Perform., 2014, 23(10), p 3567–357610.1007/s11665-014-1168-4 ↗
6. S. Lasek and E. Mazancova, Influence of Thermal Treatment on Structure and Corrosion Properties of High Manganese TRIPLEX Steels, Metalurgija, 2013, 52(4), p 441–444
7. M.B. Kannan, R.K.S. Raman, and S. Khoddam, Comparative Studies on the Corrosion Properties of a Fe-Mn-Al-Si Steel and an Interstitial-Free Steel, Corros. Sci., 2008, 50(10), p 2879–288410.1016/j.corsci.2008.07.024 ↗
8. V.F.C. Lins, M.A. Freitas, and E.M.P. e Silva, Corrosion Resistance Study of Fe–Mn–Al–C Alloys Using Immersion and Potentiostatic Tests, Appl. Surf. Sci., 2005, 250(1–4), p 124–13410.1016/j.apsusc.2004.12.040 ↗
9. I.J. Park, S.M. Lee, M. Kang, S. Lee, and Y.K. Lee, Pitting Corrosion Behavior in Advanced High Strength Steels, J. Alloy. Compd., 2015, 619, p 205–21010.1016/j.jallcom.2014.08.243 ↗
10. Y.S. Zhang, X.M. Zhua, and S.H. Zhong, Effect of Alloying Elements on the Electrochemical Polarization Behavior and Passive Film of Fe–Mn Base Alloys in Various Aqueous Solutions, Corros. Sci., 2004, 46(4), p 853–87610.1016/j.corsci.2003.09.002 ↗
11. T. Dieudonné, L. Marchetti, M. Wery, F. Miserque, M. Tabarant, J. Chêne, C. Allely, P. Cugy, and C.P. Scott, Role of Copper and Aluminum on the Corrosion Behavior of Austenitic Fe–Mn–C TWIP Steels in Aqueous Solutions and the Related Hydrogen Absorption, Corros. Sci., 2014, 83, p 234–24410.1016/j.corsci.2014.02.018 ↗
12. I.M. Ghayad, A.S. Hamada, N.N. Girgis, and W.A. Ghanem, Effect of Cold Working on the Aging and Corrosion Behaviour of Fe-Mn-Al Stainless Steel, Steel Grips, 2006, 4, p 133–137
13. Y.S. Chun, J.S. Kim, K.T. Park, Y.K. Lee, and C.S. Lee, Role of ε Martensite in Tensile Properties and Hydrogen Degradation of High-Mn Steels, Mater. Sci. Eng. A, 2012, 533, p 87–9510.1016/j.msea.2011.11.039 ↗
14. A. Grajcar, W. Krukiewicz, and S. Kołodziej, Corrosion Behaviour of Plastically Deformed High-Mn Austenitic Steels, J. Achiev. Mater. Manuf. Eng., 2010, 43(1), p 228–235
15. A. Grajcar, A. Płachcińska, S. Topolska, and M. Kciuk, Effect of Thermomechanical Treatment on the Corrosion Behavior of Si and Al-Containing High-Mn Austenitic Steel with Nb and Ti Microaddition, Mater. Tehnol., 2015, 49, p 889–89410.17222/mit.2014.148 ↗
16. A. Grajcar, M. Opiela, and G. Fojt-Dymara, The Influence of Hot-Working Conditions on a Structure of High-Manganese Steel, Arch. Civ. Mech. Eng., 2009, 9(3), p 49–5810.1016/S1644-9665(12)60217-9 ↗
17. L.A. Dobrzański, A. Grajcar, and W. Borek, Microstructure Evolution of C-Mn-Si-Al-Nb High-Manganese Steel During the Thermomechanical Processing, Mater. Sci. Forum, 2010, 638–642, p 3224–322910.4028/www.scientific.net/MSF.638-642.3224 ↗
18. A. Grajcar, S. Kołodziej, and W. Krukiewicz, Corrosion Resistance of High-Mn Austenitic Steels for the Automotive Industry, Arch. Mater. Sci. Eng, 2010, 41(2), p 77–84
19. A.S. Hamada and L.P. Karjalainen, Corrosion Behaviour of High-Mn TWIP Steels with Electroless Ni-P Coating, Open Corros. J., 2010, 3, p 1–610.2174/1876503301003010001 ↗
20. N. Takeno, Atlas of Eh-pH Diagrams, National Institute of Advanced Science and Technology, Tokyo, 2005
21. K.J. Park and H.S. Kwon, Effects of Mn on the Localized Corrosion Behavior of Fe–18Cr Alloys, Electrochim. Acta, 2010, 55(9), p 3421–342710.1016/j.electacta.2010.01.006 ↗
22. L. Mujica Roncery, S. Weber, and W. Theisen, Development of Mn-Cr-(C-N) Corrosion Resistant Twinning Induced Plasticity Steels: Thermodynamic and Diffusion Calculations, Production, and Characterization, Metall. Mater. Trans. A, 2010, 41(10), p 2471–247910.1007/s11661-010-0334-z ↗
23. Y.H. Tuan, C.S. Wang, C.Y. Tsai, C.G. Chao, and T.F. Liu, Corrosion Behaviors of Austenitic Fe-30Mn-7Al-xCr-1C Alloys in 3.5% NaCl Solution, Mater. Chem. Phys., 2009, 114(2–3), p 595–59810.1016/j.matchemphys.2008.10.009 ↗
24. Y.S. Zhang and X.M. Zhu, Electrochemical Polarization and Passive Film Analysis of Austenitic Fe-Mn-Al Steels in Aqueous Solutions, Corros. Sci., 1999, 41(9), p 1817–183310.1016/S0010-938X(99)00017-7 ↗
25. S. Suzuki, E. Matsubara, T. Komatsu, Y. Okamoto, K. Kanie, A. Muramatsu, H. Konishi, J. Mizuki, and Y. Waseda, Ex-Situ and In-Situ X-Ray Diffractions of Corrosion Products Freshly Formed on the Surface of an Iron-Silicon Alloy, Corros. Sci., 2007, 49(3), p 1081–109610.1016/j.corsci.2006.06.029 ↗
26. A. Pardo, M.C. Merino, A.E. Coy, F. Viejo, R. Arrabal, and E. Matykina, Pitting Corrosion Behavior of Austenitic Stainless Steels: Combining Effects of Mn and Mo Additions, Corros. Sci., 2008, 50(6), p 1796–180610.1016/j.corsci.2008.04.005 ↗
27. A. Grajcar, U. Galisz, and L. Bulkowski, Non-metallic Inclusions in High Manganese Austenitic Alloys, Arch. Mater. Sci. Eng., 2011, 50(1), p 21–30
28. A. Di Schino, M. Barteri, and J.M. Kenny, Grain Size Dependence of Mechanical, Corrosion and Tribological Properties of High Nitrogen Stainless Steels, J. Mater. Sci., 2003, 38(15), p 3257–326210.1023/A:1025181820252 ↗