Effect of Equal Channel Angular Pressing on Mechanical and Tribological Properties of Sintered Al-Sn Composites
Source abstract
Abstract
Evolution of structure of two-phase sintered Al-Sn composites during equal channel angular pressing (ECAP) without rotation of the sample between the passes (route A) was studied. The macrostructure with alternating thin Al and Sn interlayers was formed in the flow plane of the samples under the ECAP processing. It was found that the law of the changes in the parameters of the structure of the composites can be described using the geometry of ECAP. The greatest changes in the macrostructural parameters and increase in the strength of the composites were observed during the first two passes. The consequence of the thinning of aluminum interlayers is an increase in the depth of deformation of the subsurface layer and decrease in distance between tin interlayers which are sources of solid lubricant. As a result, the wear intensity of the sintered Al-Sn composites is additionally decreased under dry friction against steel if the sliding direction is perpendicular to the elongated phases interlayers. It was established that the composite containing about 40% Sn has the highest wear resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. S.Y. Tarasov, V.E. Rubtsov, and E.A. Kolubaev, A Proposed Diffusion-Controlled Wear Mechanism of Alloy Steel Friction Stir Welding (FSW) Tools Used on an Aluminum Alloy, Wear, 2014, 318, p 130–134. https://doi.org/10.1016/j.wear.2014.06.01410.1016/j.wear.2014.06.014 ↗
2. E. Huttunen-Saarivirta, L. Kilpi, T.J. Hakala, J. Metsajoki, and H. Ronkainen, Insights into the Behaviour of Tool Steel-Aluminium Alloy Tribopair at Different Temperatures, Tribol. Int., 2018, 119, p 567–584. https://doi.org/10.1016/j.triboint.2017.11.04110.1016/j.triboint.2017.11.041 ↗
3. J. Jerina and M. Kalin, Initiation and Evolution of the Aluminium-Alloy Transfer on Hot-Work Tool Steel at Temperatures from 20 °C to 500 °C, Wear, 2014, 319, p 234–244. https://doi.org/10.1016/j.wear.2014.07.02110.1016/j.wear.2014.07.021 ↗
4. C.G. Figueroa, I. Ortega, V.H. Jacobo, A. Ortiz, A.E. Bravo, and R. Schouwenaars, Microstructures of Tribologically Modified Surface Layers in Two-Phase Alloys, IOP Conf. Series: Mater. Sci. Eng., 2014, 63, p 012018. https://doi.org/10.1088/1757-899X/63/1/01201810.1088/1757-899X/63/1/012018 ↗
5. E.J. Abed, Study of Solidification and Mechanical Properties of Al-Sn Casting Alloys, Asian Trans. Eng., 2012, 2(3), p 89–98
6. H. Tan, S. Wang, Yu Yu, J. Cheng, S. Zhu, Z. Qiao, and J. Yang, Friction and Wear Properties of Al-20Si-5Fe-2Ni-Graphite Solid-Lubricating Composite at Elevated Temperatures, Tribol. Int., 2018, 122, p 228–235. https://doi.org/10.1016/j.triboint.2018.02.03710.1016/j.triboint.2018.02.037 ↗
7. E.J. Abed, The Influence of Different Casting Method on Solidification Time and Mechanical Properties of Al-Sn Castings, Int J. Eng. & Technol. IJET-IJENS, 2011, 11(6), p 34–44
8. O.A. Chikova, E.V. Shishkina, and A.N. Konstantinov, Measurement of Young’s Modulus and Hardness of Al-50 wt.% Sn Alloy Phases Using Nanoindentation, Phys. Metal. Metallogr., 2013, 114(7), p 616–622. https://doi.org/10.1134/S0031918X1307003X10.1134/S0031918X1307003X ↗
9. A.R. Valizadeh, A.R. Kiani-Rashid, M.H. Avazkonandeh-Gharavol, and E.Z. Karimi, The Influence of Cooling Rate on the Microstructure and Microsegregation in Al-30Sn Binary Alloy, Metallogr. Microstruct. Anal., 2013, 2(2), p 107–112. https://doi.org/10.1007/s13632-013-0064-x10.1007/s13632-013-0064-x ↗
10. K.Q. Song, Z.C. Lu, M. Zhu, R.Z. Hu, and M.Q. Zeng, A Remarkable Enhancement of Mechanical and Wear Properties by Creating a Dual-Scale Structure in an Al-Sn-Si Alloy, Surf. Coat. Technol., 2017, 325, p 682–688. https://doi.org/10.1016/j.surfcoat.2017.07.03010.1016/j.surfcoat.2017.07.030 ↗
11. X. Liu, M.Q. Zeng, Y. Ma, and M. Zhu, Promoting the High Load-Carrying Capability of Al-20 wt.% Sn Bearing Alloys Through Creating Nanocomposite Structure by Mechanical Alloying, Wear, 2012, 294–295, p 387–394. https://doi.org/10.1016/j.wear.2012.07.02110.1016/j.wear.2012.07.021 ↗
12. N.M. Rusin, A.L. Skorentsev, and E.A. Kolubaev, Structure and Tribotechnical Properties of Al-Sn Alloys Prepared by the Method of Liquid-Phase Sintering, Adv. Mater. Res., 2014, 1040, p 166–170. https://doi.org/10.4028/www.scientific.net/AMR.1040.16610.4028/www.scientific.net/AMR.1040.166 ↗
13. A. Nassar, A.S. Taha, A. Labeeb, and E.S. Gouda, Structure and Properties of the Al-Sn-Cu Bearing Alloy Under Different Cold Rolling Conditions, J. Mater. Sci. Eng. B, 2015, 5(7–8), p 298–304. https://doi.org/10.17265/2161-6221/2015.7-8.00710.17265/2161-6221/2015.7-8.007 ↗
14. N.I. Noskova, A.G. Korshunov, and A.V. Korznikov, Microstructure and Tribological Properties of Al-Sn, Al-Sn-Pb, and Sn-Sb-Cu Alloys Subjected to Severe Plastic Deformation, Metal. Sci. Heat Treat., 2008, 50(11–12), p 593–599. https://doi.org/10.1007/s11041-009-9104-110.1007/s11041-009-9104-1 ↗
15. M.R. Tripathy, B.V. Manoj Kumar, B. Basu, R.K. Dube, and S.C. Koria, Tribological Behavior of Steel Backed Al-Sn Strip Prepared Via Spray Atomization—Deposition—Rolling Route, Mater. Sci. Technol., 2007, 23(1), p 15–22. https://doi.org/10.1179/174328407X15439210.1179/174328407X154392 ↗
16. F. Bertelli, E.S. Freitas, N. Cheung, M.A. Arenas, A. Conde, J. Damborenea, and A. Garcia, Microstructure, Tensile Properties and Wear Resistance Correlations on Directionally Solidified Al-Sn-(Cu; Si) Alloys, J. Alloy. Compd., 2017, 695, p 3621–3631. https://doi.org/10.1016/j.jallcom.2016.11.39910.1016/j.jallcom.2016.11.399 ↗
17. E. Koraman, M. Baydogan, S. Sayilgan, and A. Kalkanli, Dry Sliding Wear Behavior of Al-Fe-Si-V Alloys at Elevated Temperatures, Wear, 2015, 322–323, p 101–107. https://doi.org/10.1016/j.wear.2014.10.01610.1016/j.wear.2014.10.016 ↗
18. S.P. Divya, M. Nagaraj, M. Kesavamoorthy, S.A. Srinivasan, and B. Ravisankar, Investigation on the Effect of ECAP Routes on the Wear Behavior of AA2014, Trans. Indian Inst. Metal., 2018, 71(1), p 67–77. https://doi.org/10.1007/s12666-017-1141-710.1007/s12666-017-1141-7 ↗
19. S.E. Hernandez-Martinez, J.J. Cruz-Rivera, C.G. Garay-Reyes, and J.L. Hernandez-Rivera, Experimental and Numerical Analyses of the Consolidation Process of AA 7075-2wt.% ZrO2 Powders by Equal Channel Angular Pressing, J. Mater. Eng. Perf., 2019, 28(1), p 154–161. https://doi.org/10.1007/s11665-018-3779-710.1007/s11665-018-3779-7 ↗
20. N.M. Rusin, Effect of ECAP Routes on the Specific Features of the “End Effect”, Phys. Metal. Metallogr., 2006, 102(2), p 226–232. https://doi.org/10.1134/S0031918X0608015110.1134/S0031918X06080151 ↗
21. V.M. Segal, Materials Processing by Simple Shear, Mater. Sci. Eng., A, 1995, 197(2), p 157–164. https://doi.org/10.1016/0921-5093(95)09705-810.1016/0921-5093(95)09705-8 ↗
22. K. Xu, K. Wongpreedee, and A.M. Russell, Microstructure and Strength of a Deformation Processed Al-20%Sn In Situ Composite, J. Mater. Sci., 2002, 37(24), p 5209–5214. https://doi.org/10.1023/A:102109200114710.1023/A:1021092001147 ↗
23. N.M. Rusin, A.L. Skorentsev, and I.P. Mishin, Evolution of Structure and Properties of Al-Sn Composites Under Deformation, Inorg. Mater. Appl. Res., 2015, 6(5), p 427–437. https://doi.org/10.1134/S207511331505016010.1134/S2075113315050160 ↗
24. J.X. Lu, X.Y. Wu, Z.Z. Wu, Z.Y. Liu, D.J. Guo, Y. Lou, and S.C. Ruan, Microstructure and Mechanical Properties of Ultrafine-Grained Al-6061 Prepared Using Intermittent Ultrasonic-Assisted Equal-Channel Angular Pressing, J. Mater. Eng. Perf., 2017, 26(10), p 5107–5117. https://doi.org/10.1007/s11665-017-2946-610.1007/s11665-017-2946-6 ↗
25. T. Rameshkumar and I. Rajendran, Mechanical and Tribological Properties on Al-Sn-Si Alloy-Based Plan Bearing Material, Tribol. Trans., 2013, 56(2), p 268–274. https://doi.org/10.1080/10402004.2012.74305710.1080/10402004.2012.743057 ↗
26. O.O. Stolyarova, T.I. Muravyeva, D.L. Zagorskiy, and M.M. Gubenko, Investigation of the Surface of Antifriction Al-Cu-Si-Sn-Pb Aluminum Alloys, J. Surf. Investig., 2017, 11(4), p 832–839. https://doi.org/10.1134/S102745101704029210.1134/S1027451017040292 ↗
27. N.M. Rusin, A.L. Skorentsev, and E.A. Kolubaev, Dry Friction of Pure Aluminum Against Steel, J. Frict. Wear, 2016, 37(1), p 86–93. https://doi.org/10.3103/S106836661601014110.3103/S1068366616010141 ↗