DataVXJournal of Materials Engineering and PerformancePaper
journal article·2021-10

Characteristics of Metal Specimens Formed by Selective Laser Melting: A State-of-the-Art Review

Dongju Chen, Peng Wang, Ri Pan, Chunqing Zha, Jinwei Fan, Dong Liang, You Zhao

Journal of Materials Engineering and Performance· Volume 30· Issue 10
Publisher page
Source abstract

Abstract

The process of selective laser melting (SLM) is complex and instantaneous, which communicates with a variety of physical phenomena such as solid–liquid phase transition. The microstructure and material properties are favorable evidence to explain the SLM forming mechanism. In this paper, the forming properties of the iron-based alloy, titanium-based alloys, and aluminum-based alloys are discussed, which are relatively mature in research. The influence of processing strategy on the density and quality of metal specimens is briefly introduced. The research progress of microstructure and mechanical properties of metal specimens formed by SLM is mainly introduced. Also, the influence of processing parameters and heat treatment on the microstructure and the effect of microstructure on mechanical properties are summarized. The corrosion behavior of metal specimens formed by SLM is analyzed. Furthermore, the research development of copper-based alloys, shape memory alloys, and high-entropy alloys is presented. Finally, the problems encountered in the alloys forming process are described, and the future development direction has prospected.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

Metals & alloysMaterials processing

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. S. Dadbakhsh, R. Mertens, L. Hao, J.V. Humbeeck, and J.P. Kruth, Selective Laser Melting to Manufacture “In Situ” Metal Matrix Composites: A review, Adv. Eng. Mater., 2019, 21, p 1801244. https://doi.org/10.1002/adem.20180124410.1002/adem.201801244 ↗
2. J.P. Kruth, L. Froyen, J.V. Vaerenbergh, P. Mercelis, M. Rombouts, and B. Lauwers, Selective Laser Melting of Iron-based Powder, J. Mater. Process. Technol., 2004, 149, p 616–622. https://doi.org/10.1016/j.jmatprotec.2003.11.05110.1016/j.jmatprotec.2003.11.051 ↗
3. J.P. Kruth, G. Levy, F. Klocke, and T.H.C. Childs, Consolidation Phenomena in Laser and Powder-bed Based Layered Manufacturing, CIRP Ann., 2007, 56, p 730–759. https://doi.org/10.1016/j.cirp.2007.10.00410.1016/j.cirp.2007.10.004 ↗
4. J. Zhang, B. Song, Q. Wei, D. Bourell, and Y. Shi, A Review of Selective Laser Melting of Aluminum Alloys: Processing, Microstructure, Property and Developing Trends, J. Mater. Sci. Technol., 2019, 35, p 270–284. https://doi.org/10.1016/j.jmst.2018.09.00410.1016/j.jmst.2018.09.004 ↗
5. H.K. Rafi, N.V. Karthik, H. Gong, T.L. Starr, and B.E. Stucker, Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting, J. Mater. Eng. Perform., 2013, 22, p 3872–3883. https://doi.org/10.1007/s11665-013-0658-010.1007/s11665-013-0658-0 ↗
6. B. Song, S. Dong, P. Coddet, H. Liao, and C. Coddet, Fabrication of NiCr Alloy Parts by Selective Laser Melting: Columnar Microstructure and Anisotropic Mechanical Behavior, Mater. Des., 2014, 53, p 1–7. https://doi.org/10.1016/j.matdes.2013.07.01010.1016/j.matdes.2013.07.010 ↗
7. S.A.M. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis, Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities, Mater. Today, 2018, 21(1), p 22–37. https://doi.org/10.1016/j.mattod.2017.07.00110.1016/j.mattod.2017.07.001 ↗
8. C. Wang, X.P. Tan, Z. Du, S. Chandra, Z. Sun, C.W.J. Lim, S.B. Tor, C.S. Lim, and C.H. Wong, Additive Manufacturing of NiTi Shape Memory Alloys Using Pre-Mixed Powders, J. Mater. Process. Technol., 2019, 271, p 152–161. https://doi.org/10.1016/j.jmatprotec.2019.03.02510.1016/j.jmatprotec.2019.03.025 ↗
9. B. Zhang, J. Chen, and C. Coddet, Microstructure and Transformation Behavior of In-situ Shape Memory Alloys by Selective Laser Melting Ti–Ni Mixed Powder, J. Mater. Sci. Technol., 2013, 29, p 863–867. https://doi.org/10.1016/j.jmst.2013.05.00610.1016/j.jmst.2013.05.006 ↗
10. K. Guan, Z. Wang, M. Gao, X. Li, and X. Zeng, Effects of Processing Parameters on Tensile Properties of Selective Laser Melted 304 Stainless Steel, Mater. Des., 2013, 50, p 581–586. https://doi.org/10.1016/j.matdes.2013.03.05610.1016/j.matdes.2013.03.056 ↗
11. L.E. Murr, E. Martinez, J. Hernandez, S. Collins, K.N. Amato, S.M. Gaytan, and P.W. Shindo, Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting, J. Mater. Res. Technol., 2012, 1, p 167–177. https://doi.org/10.1016/S2238-7854(12)70029-710.1016/S2238-7854(12)70029-7 ↗
12. C.C. Ng, M.M. Savalani, M.L. Lau, and H.C. Man, Microstructure and Mechanical Properties of Selective Laser Melted Magnesium, Appl. Surf. Sci., 2011, 257, p 7447–7454. https://doi.org/10.1016/j.apsusc.2011.03.00410.1016/j.apsusc.2011.03.004 ↗
13. M. Gieseke, C. Noelke, S. Kaierle, V. Wesling, and H. Haferkamp, Selective Laser Melting of Magnesium and Magnesium Alloys BT—Magnesium Technology 213. N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, Eds., Springer, Cham, 2016, p 65–68. https://doi.org/10.1007/978-3-319-48150-0_1110.1007/978-3-319-48150-0_11 ↗
14. X.P. Li, X.J. Wang, M. Saunders, A. Suvorova, L.C. Zhang, Y.J. Liu, M.H. Fang, Z.H. Huang, and T.B. Sercombe, A Selective Laser Melting and Solution Heat Treatment Refined Al–12Si Alloy with a Controllable Ultrafine Eutectic Microstructure and 25% Tensile Ductility, Acta Mater., 2015, 95, p 74–82. https://doi.org/10.1016/j.actamat.2015.05.01710.1016/j.actamat.2015.05.017 ↗
15. K. Kempen, L. Thijs, J. Van Humbeeck, and J.-P. Kruth, Processing AlSi10Mg by Selective Laser Melting: Parameter Optimisation and Material Characterisation, Mater. Sci. Technol., 2015, 31, p 917–923. https://doi.org/10.1179/1743284714Y.000000070210.1179/1743284714Y.0000000702 ↗
16. H. Yu, J. Yang, J. Yin, Z. Wang, and X. Zeng, Comparison on Mechanical Anisotropies of Selective Laser Melted Ti–6Al–4V Alloy and 304 Stainless Steel, Mater. Sci. Eng. A, 2017, 695, p 92–100. https://doi.org/10.1016/j.msea.2017.04.03110.1016/j.msea.2017.04.031 ↗
17. H. Attar, S. Ehtemam-Haghighi, D. Kent, and M.S. Dargusch, Recent Developments and Opportunities in Additive Manufacturing of Titanium-Based Matrix Composites: A Review, Int. J. Mach. Tools Manuf., 2018, 133, p 85–102. https://doi.org/10.1016/j.ijmachtools.2018.06.00310.1016/j.ijmachtools.2018.06.003 ↗
18. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng, The Microstructure and Mechanical Properties of Deposited-IN718 by Selective Laser Melting, J. Alloys Compd., 2012, 513, p 518–523. https://doi.org/10.1016/j.jallcom.2011.10.10710.1016/j.jallcom.2011.10.107 ↗
19. T.D. McLouth, G.E. Bean, D.B. Witkin, S.D. Sitzman, P.M. Adams, D.N. Patel, W. Park, J.-M. Yang, and R.J. Zaldivar, The Effect of Laser Focus Shift on Microstructural Variation of Inconel 718 Produced by Selective Laser Melting, Mater. Des., 2018, 149, p 205–213. https://doi.org/10.1016/j.matdes.2018.04.01910.1016/j.matdes.2018.04.019 ↗
20. L. Wu, H. Zhu, X. Gai, and Y. Wang, Evaluation of the Mechanical Properties and Porcelain Bond Strength of Cobalt–Chromium Dental Alloy Fabricated by Selective Laser Melting, J. Prosthet. Dent., 2014, 111, p 51–55. https://doi.org/10.1016/j.prosdent.2013.09.01110.1016/j.prosdent.2013.09.011 ↗
21. P. Fox, S. Pogson, C.J. Sutcliffe, and E. Jones, Interface Interactions Between Porous Titanium/Tantalum Coatings, Produced by Selective Laser Melting (SLM), on A Cobalt–chromium Alloy, Surf. Coat. Technol., 2008, 202, p 5001–5007. https://doi.org/10.1016/j.surfcoat.2008.05.00310.1016/j.surfcoat.2008.05.003 ↗
22. G.M. Karthik, P. Sathiyamoorthi, A. Zargaran, J.M. Park, P. Asghari-Rad, S. Son, S.H. Park, and H.S. Kim, Novel Precipitation and Enhanced Tensile Properties in Selective Laser Melted Cu-Sn Alloy, Materialia, 2020, 13, p 100861. https://doi.org/10.1016/j.mtla.2020.10086110.1016/j.mtla.2020.100861 ↗
23. D.Q. Zhang, Z.H. Liu, Q.Z. Cai, J.H. Liu, and C.K. Chua, Influence of Ni Content on Microstructure of W–Ni Alloy Produced by Selective Laser Melting, Int. J. Refract. Met. Hard Mater., 2014, 45, p 15–22. https://doi.org/10.1016/j.ijrmhm.2014.02.00710.1016/j.ijrmhm.2014.02.007 ↗
24. S. Li, H. Hassanin, M.M. Attallah, N.J.E. Adkins, and K. Essa, The Development of TiNi-based Negative Poisson’s Ratio Structure Using Selective Laser Melting, Acta Mater., 2016, 105, p 75–83. https://doi.org/10.1016/j.actamat.2015.12.01710.1016/j.actamat.2015.12.017 ↗
25. H. Attar, K.G. Prashanth, L.C. Zhang, M. Calin, I.V. Okulov, S. Scudino, C. Yang, and J. Eckert, Effect of Powder Particle Shape on the Properties of in Situ Ti–TiB Composite Materials Produced by Selective Laser Melting, J. Mater. Sci. Technol., 2015, 31, p 1001–1005. https://doi.org/10.1016/j.jmst.2015.08.00710.1016/j.jmst.2015.08.007 ↗
26. H.J. Niu and I.T.H. Chang, Selective Laser Sintering of Gas and Water Atomized High Speed Steel Powders, Scr. Mater., 1999, 41, p 25–30. https://doi.org/10.1016/s1359-6462(99)00089-510.1016/s1359-6462(99)00089-5 ↗
27. J. Mazumder, D. Dutta, N. Kikuchi, and A. Ghosh, Closed Loop Direct Metal Deposition: Art to Part, Opt. Lasers Eng., 2000, 34, p 397–414. https://doi.org/10.1016/S0143-8166(00)00072-510.1016/S0143-8166(00)00072-5 ↗
28. D. Bourell, B. Stucker, A.B. Spierings, N. Herres, and G. Levy, Influence of the Particle Size Distribution on Surface Quality and Mechanical Properties in AM Steel Parts, Rapid Prototyping J., 2011, 17, p 195–202. https://doi.org/10.1108/1355254111112477010.1108/13552541111124770 ↗
29. A. Spierings and G. Levy, Comparison of Density of Stainless Steel 316L Parts Produced with Selective Laser Melting Using Different Powder Grades, in 20th Annu. Int. Solid Free. Fabr. Symp. SFF 2009, 2009.
30. B. Liu, R. Wildman, C. Tuck, I. Ashcroft, and R. Hague, Investigaztion the Effect of Particle Size Distribution on Processing Parameters Optimisation in Selective Laser Melting Process, in 22nd Annu. Int. Solid Free. Fabr. Symp.—An Addit. Manuf. Conf. SFF 2011, 2011.
31. H. Gu, H. Gong, J. j. Dilip, D. Pal, A. Hicks, H. Doak, and B. Stucker, Effects of Powder Variation on the Microstructure and Tensile Strength of Ti6Al4V Parts Fabricated by Selective Laser Melting, 2014.
32. L. Technology, Vacuum vs Non-vacuum Melted Gas Atomised Powders, LPW Technology, CASE STUDY, 09, 2017.
33. J. Wang, X.L. Zhou, J. Li, M. Brochu, and Y.F. Zhao, Microstructures and Properties of SLM-Manufactured Cu–15Ni–8Sn Alloy, Addit. Manuf., 2020, 31, p 100921. https://doi.org/10.1016/j.addma.2019.10092110.1016/j.addma.2019.100921 ↗
34. S. Dadbakhsh, M. Speirs, J.P. Kruth, and J. Van Humbeeck, Influence of SLM on Shape Memory and Compression Behaviour of NiTi Scaffolds, CIRP Ann., 2015, 64, p 209–212. https://doi.org/10.1016/j.cirp.2015.04.03910.1016/j.cirp.2015.04.039 ↗
35. W. Shi, P. Wang, Y. Liu, Y. Hou, and G. Han, Properties of 316L Formed by a 400 W Power Laser Selective Laser Melting with 250 μm Layer Thickness, Powder Technol., 2020, 360, p 151–164. https://doi.org/10.1016/j.powtec.2019.09.05910.1016/j.powtec.2019.09.059 ↗
36. Z. Wang, Z. Xiao, Y. Tse, C. Huang, and W. Zhang, Optimization of Processing Parameters and Establishment of a Relationship between Microstructure and Mechanical Properties of SLM titanium Alloy, Opt. Laser Technol., 2019, 112, p 159–167. https://doi.org/10.1016/j.optlastec.2018.11.01410.1016/j.optlastec.2018.11.014 ↗
37. S. Liu, H. Zhu, G. Peng, J. Yin, and X. Zeng, Microstructure Prediction of Selective Laser Melting AlSi10Mg Using Finite Element Analysis, Mater. Des., 2018, 142, p 319–328. https://doi.org/10.1016/j.matdes.2018.01.02210.1016/j.matdes.2018.01.022 ↗
38. Y. Gao, D. Zhang, M. Cao, R. Chen, Z. Feng, R. Poprawe, J.H. Schleifenbaum, and S. Ziegler, Effect of δ Phase on High Temperature Mechanical Performances of Inconel 718 Fabricated with SLM Process, Mater. Sci. Eng. A, 2019, 767, p 138327. https://doi.org/10.1016/j.msea.2019.13832710.1016/j.msea.2019.138327 ↗
39. M. Peter and J.P. Kruth, Residual Stresses in Selective Laser Sintering and Selective Laser Melting, Rapid Prototyping J., 2006, 12, p 254–265. https://doi.org/10.1108/1355254061070701310.1108/13552540610707013 ↗
40. W.H. Yu, S.L. Sing, C.K. Chua, C.N. Kuo, and X.L. Tian, Particle-reinforced Metal Matrix Nanocomposites Fabricated by Selective Laser Melting: A State of the Art Review, Prog. Mater. Sci., 2019, 104, p 330–379. https://doi.org/10.1016/j.pmatsci.2019.04.00610.1016/j.pmatsci.2019.04.006 ↗
41. J. Ma, J. Zhang, W. Liu, and Z. Shen, Suppressing Pore-boundary Separation during Spark Plasma Sintering of Tungsten, J. Nucl. Mater., 2013, 438, p 199–203. https://doi.org/10.1016/j.jnucmat.2013.03.04210.1016/j.jnucmat.2013.03.042 ↗
42. Y. Liu, Y. Yang, S. Mai, D. Wang, and C. Song, Investigation into Spatter Behavior during Selective Laser Melting of AISI 316L Stainless Steel Powder, Mater. Des., 2015, 87, p 797–806. https://doi.org/10.1016/j.matdes.2015.08.08610.1016/j.matdes.2015.08.086 ↗
43. M. Markl and C. Körner, Multiscale Modeling of Powder Bed–based Additive Manufacturing, Ann. Rev. Mater. Res., 2016, 46, p 93–123. https://doi.org/10.1146/annurev-matsci-070115-03215810.1146/annurev-matsci-070115-032158 ↗
44. F. Verhaeghe, T. Craeghs, J. Heulens, and L. Pandelaers, A Pragmatic Model for Selective Laser Melting with Evaporation, Acta Mater., 2009, 57, p 6006–6012. https://doi.org/10.1016/j.actamat.2009.08.02710.1016/j.actamat.2009.08.027 ↗
45. A. Masmoudi, R. Bolot, and C. Coddet, Investigation of the Laser–Powder–Atmosphere Interaction Zone during the Selective Laser Melting Process, J. Mater. Process. Technol., 2015, 225, p 122–132. https://doi.org/10.1016/j.jmatprotec.2015.05.00810.1016/j.jmatprotec.2015.05.008 ↗
46. Y.C. Wu, C.H. San, C.H. Chang, H.J. Lin, R. Marwan, S. Baba, and W.S. Hwang, Numerical Modeling of Melt-pool Behavior in Selective Laser Melting with Random Powder Distribution and Experimental Validation, J. Mater. Process. Technol., 2018, 254, p 72–78. https://doi.org/10.1016/j.jmatprotec.2017.11.03210.1016/j.jmatprotec.2017.11.032 ↗
47. W. Kurz, C. Bezencon, and M. Gäumann, Columnar to Equiaxed Transition in Solidification Processing, Sci. Technol. Adv. Mater., 2001, 2, p 185. https://doi.org/10.1016/S1468-6996(01)00047-X10.1016/S1468-6996(01)00047-X ↗
48. Q. Zhang, H. Xue, Q. Tang, S. Pan, M. Rettenmayr, and M. Zhu, Microstructural Evolution during Temperature Gradient Zone Melting: Cellular Automaton Simulation and Experiment, Comput. Mater. Sci., 2018, 146, p 204–212. https://doi.org/10.1016/j.commatsci.2018.01.03210.1016/j.commatsci.2018.01.032 ↗
49. K.G. Prashanth and J. Eckert, Formation of Metastable Cellular Microstructures in Selective Laser Melted Alloys, J. Alloys Compd., 2017, 707, p 7–34. https://doi.org/10.1016/j.jallcom.2016.12.20910.1016/j.jallcom.2016.12.209 ↗
50. M. Bernhard, Additive Manufacturing Technologies—Rapid Prototyping to Direct Digital Manufacturing, Assem. Autom., 2012, https://doi.org/10.1108/aa.2012.03332baa.01010.1108/aa.2012.03332baa.010 ↗
51. W. Di, Y. Liu, Y. Yang, and D. Xiao, Theoretical and Experimental Study on Surface Roughness of 316L Stainless Steel Metal Parts Obtained through Selective Laser Melting, Rapid Prototyping J., 2016, 22, p 706–716. https://doi.org/10.1108/RPJ-06-2015-007810.1108/RPJ-06-2015-0078 ↗
52. G. Strano, L. Hao, R.M. Everson, and K.E. Evans, Surface Roughness Analysis, Modelling and Prediction in Selective Laser Melting, J. Mater. Process. Technol., 2013, 213, p 589–597. https://doi.org/10.1016/j.jmatprotec.2012.11.01110.1016/j.jmatprotec.2012.11.011 ↗
53. Y. Yang, Accuracy and Density Optimization in Directly Fabricating Customized Orthodontic Production by Selective Laser Melting, Rapid Prototyping J., 2012, 18, p 482–489. https://doi.org/10.1108/1355254121127202710.1108/13552541211272027 ↗
54. W. Di, Y. Yongqiang, S. Xubin, and C. Yonghua, Study on Energy Input and its Influences on Single-track, Multi-track, and Multi-Layer in SLM, Int. J. Adv. Manuf. Technol., 2012, 58, p 1189–1199. https://doi.org/10.1007/s00170-011-3443-y10.1007/s00170-011-3443-y ↗
55. Z. Sun, X. Tan, S.B. Tor, and W.Y. Yeong, Selective Laser Melting of Stainless Steel 316L with Low Porosity and High Build Rates, Mater. Des., 2016, 104, p 197–204. https://doi.org/10.1016/j.matdes.2016.05.03510.1016/j.matdes.2016.05.035 ↗
56. S. Wang, Y. Liu, W. Shi, B. Qi, J. Yang, F. Zhang, D. Han, and Y. Ma, Research on High Layer Thickness Fabricated of 316L by Selective Laser Melting, Materials, 2017, 10, p 1055. https://doi.org/10.3390/ma1009105510.3390/ma10091055 ↗
57. Y. Zhong, L. Liu, S. Wikman, D. Cui, and Z. Shen, Intragranular Cellular Segregation Network Structure Strengthening 316L Stainless Steel Prepared by Selective Laser Melting, J. Nucl. Mater., 2016, 470, p 170–178. https://doi.org/10.1016/j.jnucmat.2015.12.03410.1016/j.jnucmat.2015.12.034 ↗
58. I. Simonovski and L. Cizelj, Computational Multiscale Modeling of Intergranular Cracking, J. Nucl. Mater., 2011, 414, p 243–250. https://doi.org/10.1016/j.jnucmat.2011.03.05110.1016/j.jnucmat.2011.03.051 ↗
59. I. Simonovski and L. Cizelj, Cohesive Element Approach to Grain Level Modelling of Intergranular Cracking, Eng. Fract. Mech., 2013, 110, p 364–377. https://doi.org/10.1016/j.engfracmech.2013.05.01110.1016/j.engfracmech.2013.05.011 ↗
60. A. Ahmadi, R. Mirzaeifar, N.S. Moghaddam, A.S. Turabi, H.E. Karaca, and M. Elahinia, Effect of Manufacturing Parameters on Mechanical Properties of 316L Stainless Steel Parts Fabricated by Selective Laser Melting: A Computational Framework, Mater. Des., 2016, 112, p 328–338. https://doi.org/10.1016/j.matdes.2016.09.04310.1016/j.matdes.2016.09.043 ↗
61. D. Wang, C. Song, Y. Yang, and Y. Bai, Investigation of Crystal Growth Mechanism during Selective Laser Melting and Mechanical Property Characterization of 316L Stainless Steel Parts, Mater. Des., 2016, 100, p 291–299. https://doi.org/10.1016/j.matdes.2016.03.11110.1016/j.matdes.2016.03.111 ↗
62. J. Suryawanshi, K.G. Prashanth, and U. Ramamurty, Mechanical Behavior of Selective Laser Melted 316L Stainless Steel, Mater. Sci. Eng. A, 2017, 696, p 113–121. https://doi.org/10.1016/j.msea.2017.04.05810.1016/j.msea.2017.04.058 ↗
63. J.M. Jeon, J.M. Park, J.-H. Yu, J.G. Kim, Y. Seong, S.H. Park, and H.S. Kim, Effects of Microstructure and Internal Defects on Mechanical Anisotropy and Asymmetry of Selective Laser-Melted 316L Austenitic Stainless Steel, Mater. Sci. Eng. A, 2019, 763, p 138152. https://doi.org/10.1016/j.msea.2019.13815210.1016/j.msea.2019.138152 ↗
64. Z. Zhang, B. Chu, L. Wang, and Z. Lu, Comprehensive Effects of Placement Orientation and Scanning Angle on Mechanical Properties and Behavior of 316L Stainless Steel Based on the Selective Laser Melting Process, J. Alloys Compd., 2019, https://doi.org/10.1016/j.jallcom.2019.03.08210.1016/j.jallcom.2019.03.082 ↗
65. T. Simson, A. Emmel, A. Dwars, and J. Böhm, Residual Stress Measurements on AISI 316L Samples Manufactured by Selective Laser Melting, Addit. Manuf., 2017, 17, p 183–189. https://doi.org/10.1016/j.addma.2017.07.00710.1016/j.addma.2017.07.007 ↗
66. A. Metals, Properties and Selection Stainless Steels, Tool Materials and Special-Purpose Metals, Metals Handbook, Vol. 3, ASM, Metals Park, 1980
67. M.S.I.N. Kamariah, W.S.W. Harun, F. Ahmad, and F. Tarlochan, Mechanical Behaviours of Selective Laser Melting 316L Stainless Steel, J. Addit. Manuf. Adv. Mater., 2020, 1, p 1–18. https://journal.scientiaca.org/index.php/jams/article/view/55.
68. V. Sufiiarov, E. Borisov, I. Polozov, and D. Masaylo, Study of Microstructure and Properties of 316L Steel after Selective Laser Melting, 2016.
69. T. Larimian, M. Kannan, D. Grzesiak, and B. Al-Mangour, Effect of Energy Density and Scanning Strategy on Densification, Microstructure and Mechanical Properties of 316L Stainless Steel Processed via Selective Laser Melting, Mater. Sci. Eng. A, 2019, 770, p 138455. https://doi.org/10.1016/j.msea.2019.13845510.1016/j.msea.2019.138455 ↗
70. O.O. Salman, C. Gammer, J. Eckert, M.Z. Salih, E.H. Abdulsalam, K.G. Prashanth, and S. Scudino, Selective Laser Melting of 316L Stainless Steel: Influence of TiB2 Addition on Microstructure and Mechanical Properties, Mater. Today Commun., 2019, 21, p 100615. https://doi.org/10.1016/j.mtcomm.2019.10061510.1016/j.mtcomm.2019.100615 ↗
71. S. Yin, X. Yan, R. Jenkins, and C. Chen, Hybrid Additive Manufacture of 316L Stainless Steel with Cold Spray and Selective Laser Melting: Microstructure and Mechanical Properties, J. Mater. Process. Technol., 2019, 273, p 116248. https://doi.org/10.1016/j.jmatprotec.2019.05.029. https://doi.org/10.1016/j.msea.2017.04.058.10.1016/j.jmatprotec.2019.05.029 10.1016/j.msea.2017.04.058 ↗
72. P. Guo, B. Zou, C. Huang, and H. Gao, Study on Microstructure, Mechanical Properties and Machinability of Efficiently Additive Manufactured AISI 316L Stainless Steel by High-Power Direct Laser Deposition, J. Mater. Process. Technol., 2017, 240, p 12–22. https://doi.org/10.1016/j.jmatprotec.2016.09.00510.1016/j.jmatprotec.2016.09.005 ↗
73. R. Casati, J. Lemke, and M. Vedani, Microstructure and Fracture Behavior of 316L Austenitic Stainless Steel Produced by Selective Laser Melting, J. Mater. Sci. Technol., 2016, 32, p 738–744. https://doi.org/10.1016/j.jmst.2016.06.01610.1016/j.jmst.2016.06.016 ↗
74. G. Sander, S. Thomas, V. Cruz, M. Jurg, N. Birbilis, X. Gao, M. Brameld, and C.R. Hutchinson, On the Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting, J. Electrochem. Soc., 2017, 164, p 250–257. https://doi.org/10.1149/2.0551706jes10.1149/2.0551706jes ↗
75. Q. Chao, V. Cruz, S. Thomas, N. Birbilis, P. Collins, A. Taylor, P.D. Hodgson, and D. Fabijanic, On the Enhanced Corrosion Resistance of a Selective Laser Melted Austenitic Stainless Steel, Scr. Mater., 2017, 141, p 94–98. https://doi.org/10.1016/j.scriptamat.2017.07.03710.1016/j.scriptamat.2017.07.037 ↗
76. A.B. Kale, B.K. Kim, D.I. Kim, E.G. Castle, M. Reece, and S.H. Choi, An Investigation of the Corrosion Behavior of 316L Stainless Steel Fabricated by SLM and SPS Techniques, Mater. Charact., 2020, 163, p 110204. https://doi.org/10.1016/j.matchar.2020.11020410.1016/j.matchar.2020.110204 ↗
77. D. Kong, X. Ni, C. Dong, X. Lei, L. Zhang, C. Man, J. Yao, X. Cheng, and X. Li, Bio-functional and Anti-corrosive 3D Printing 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Des., 2018, 152, p 88–101. https://doi.org/10.1016/j.matdes.2018.04.05810.1016/j.matdes.2018.04.058 ↗
78. M. Laleh, A.E. Hughes, W. Xu, I. Gibson, and M.Y. Tan, Unexpected Erosion-Corrosion Behaviour of 316L Stainless Steel Produced by Selective Laser Melting, Corrosion Sci., 2019, 155, p 67–74. https://doi.org/10.1016/j.corsci.2019.04.02810.1016/j.corsci.2019.04.028 ↗
79. K. Lin, X. Li, H. Dong, S. Du, Y. Lu, X. Ji, and D. Gu, Surface Modification of 316 Stainless Steel with Platinum for the Application of Bipolar Plates in High Performance Proton Exchange Membrane Fuel Cells, Int. J. Hydrogen Energy, 2017, 42, p 2338–2348. https://doi.org/10.1016/j.ijhydene.2016.09.22010.1016/j.ijhydene.2016.09.220 ↗
80. S. Lv, H. Tao, Y. Hong, Y. Zheng, C. Zhou, J. Zheng, and L. Zhang, Surface Treatment and Corrosion Behavior of 316L Stainless Steel Fabricated by Selective Laser Melting, Mater. Res. Express, 2019, 6, p 106518.10.1088/2053-1591/ab3570 ↗
81. J. Chen, Y. Yang, C. Song, M. Zhang, S. Wu, and D. Wang, Interfacial Microstructure and Mechanical Properties of 316L/CuSn10 Multi-material Bimetallic Structure Fabricated by Selective Laser Melting, Mater. Sci. Eng. A, 2019, 752, p 75–85. https://doi.org/10.1016/j.msea.2019.02.09710.1016/j.msea.2019.02.097 ↗
82. Y. Lyu, J. Wang, Y. Wan, and Y. Chen, The Influence of Selective Laser Melting Process Parameters on the Property of TiAlN/TiN Multilayer Coating on the 316L Steel, Coatings, 2019, 9, p 377. https://doi.org/10.3390/coatings906037710.3390/coatings9060377 ↗
83. A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, and W.E. King, An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel, Metall. Mater. Trans. A, 2014, 45, p 6260–6270. https://doi.org/10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
84. A. Khorasani, I. Gibson, U.S. Awan, and A. Ghaderi, The Effect of SLM Process Parameters on Density, Hardness, Tensile Strength and Surface Quality of Ti–6Al–4V, Addit. Manuf., 2019, 25, p 176–186. https://doi.org/10.1016/j.addma.2018.09.00210.1016/j.addma.2018.09.002 ↗
85. J. Sun, Y. Yang, and D. Wang, Parametric Optimization of Selective Laser Melting for Forming Ti6Al4V Samples by Taguchi Method, Opt. Laser Technol., 2013, 49, p 118–124. https://doi.org/10.1016/j.optlastec.2012.12.00210.1016/j.optlastec.2012.12.002 ↗
86. P. Edwards and M. Ramulu, Fatigue Performance Evaluation of Selective Laser Melted Ti–6Al–4V, Mater. Sci. Eng. A, 2014, 598, p 327–337. https://doi.org/10.1016/j.msea.2014.01.04110.1016/j.msea.2014.01.041 ↗
87. P. Tao, H.X. Li, B.Y. Huang, Q.D. Hu, S.L. Gong, and Q.Y. Xu, Tensile Behavior of Ti–6Al–4V Alloy Fabricated by Selective Laser Melting: Effects of Microstructures and As-built Surface Quality, China Found., 2018, 15, p 243–252. https://doi.org/10.1007/s41230-018-8064-810.1007/s41230-018-8064-8 ↗
88. G. Kasperovich and J. Hausmann, Improvement of Fatigue Resistance and Ductility of TiAl6V4 Processed by Selective Laser Melting, J. Mater. Process. Technol., 2015, 220, p 202–214. https://doi.org/10.1016/j.jmatprotec.2015.01.02510.1016/j.jmatprotec.2015.01.025 ↗
89. S. Bagehorn, J. Wehr, and H.J. Maier, Application of Mechanical Surface Finishing Processes for Roughness Reduction and Fatigue Improvement of Additively Manufactured Ti–6Al–4V Parts, Int. J. Fatigue, 2017, 102, p 135–142. https://doi.org/10.1016/j.ijfatigue.2017.05.00810.1016/j.ijfatigue.2017.05.008 ↗
90. X. Lu, X. Lin, M. Chiumenti, M. Cervera, J. Li, L. Ma, L. Wei, Y. Hu, and W. Huang, Finite Element Analysis and Experimental Validation of the Thermo Mechanical Behavior in Laser Solid Forming of Ti–6Al–4V, Addit. Manuf., 2018, 21, p 30–40. https://doi.org/10.1016/j.addma.2018.02.00310.1016/j.addma.2018.02.003 ↗
91. P. Tao, J. Zhong, H. Li, Q. Hu, S. Gong, and Q. Xu, Microstructure, Mechanical Properties, and Constitutive Models for Ti–6Al–4V Alloy Fabricated by Selective Laser Melting (SLM), Metals, 2019, 9, p 447. https://doi.org/10.3390/met904044710.3390/met9040447 ↗
92. S.S. Al-Bermani, M.L. Blackmore, W. Zhang, and I. Todd, The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti–6Al–4V, Metall. Mater. Trans. A, 2010, 41, p 3422–3434. https://doi.org/10.1007/s11661-010-0397-x10.1007/s11661-010-0397-x ↗
93. H. Gong, K. Rafi, H. Gu, G.D. Janaki Ram, T. Starr, and B. Stucker, Influence of Defects on Mechanical Properties of Ti–6Al–4V Components Produced by Selective Laser Melting and Electron Beam Melting, Mater. Des., 2015, 86, p 545–554. https://doi.org/10.1016/j.matdes.2015.07.14710.1016/j.matdes.2015.07.147 ↗
94. M. Simonelli, Y.Y. Tse, and C. Tuck, Effect of the Build Orientation on the Mechanical Properties and Fracture Modes of SLM Ti–6Al–4V, Mater. Sci. Eng. A, 2014, 616, p 1–11. https://doi.org/10.1016/j.msea.2014.07.08610.1016/j.msea.2014.07.086 ↗
95. W. Xu, M. Brandt, S. Sun, J. Elambasseril, Q. Liu, K. Latham, K. Xia, and M. Qian, Additive Manufacturing of Strong and Ductile Ti–6Al–4V by Selective Laser Melting via in Situ Martensite Decomposition, Acta Mater., 2015, 85, p 74–84. https://doi.org/10.1016/j.actamat.2014.11.02810.1016/j.actamat.2014.11.028 ↗
96. W. Xu, E.W. Lui, A. Pateras, M. Qian, and M. Brandt, In Situ Tailoring Microstructure in Additively Manufactured Ti–6Al–4V for Superior Mechanical Performance, Acta Mater., 2017, 125, p 390–400. https://doi.org/10.1016/j.actamat.2016.12.02710.1016/j.actamat.2016.12.027 ↗
97. B. He, K. Chang, W. Wu, and C. Zhang, The Formation Mechanism of TiC Reinforcement and Improved Tensile Strength in Additive Manufactured Ti Matrix Nanocomposite, Vacuum, 2017, 143, p 23–27. https://doi.org/10.1016/j.vacuum.2017.05.02910.1016/j.vacuum.2017.05.029 ↗
98. H.L. Li, D.C. Jia, Z.H. Yang, X.M. Duan, D.L. Cai, and Y. Zhou, Research Progress on Selective Laser Melting 3D Printing of Titanium Alloys and Titanium Matrix Composites, Mater. Sci. Technol., 2019, 27, p 1–15. https://doi.org/10.11951/j.issn.1005-0299.2018011010.11951/j.issn.1005-0299.20180110 ↗
99. H. Attar, M. Bönisch, M. Calin, L.-C. Zhang, S. Scudino, and J. Eckert, Selective Laser Melting of in Situ Titanium–Titanium Boride Composites: Processing Microstructure and Mechanical Properties, Acta Mater., 2014, 76, p 13–22. https://doi.org/10.1016/j.actamat.2014.05.02210.1016/j.actamat.2014.05.022 ↗
100. D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, and R. Poprawe, Nanocrystalline TiC Reinforced Ti Matrix Bulk-form Nanocomposites by Selective Laser Melting (SLM): Densification, Growth Mechanism and Wear Behavior, Compos. Sci. Technol., 2011, 71, p 1612–1620. https://doi.org/10.1016/j.compscitech.2011.07.01010.1016/j.compscitech.2011.07.010 ↗