Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel
Source abstract
Abstract
The microstructure, mechanical properties, and corrosion behavior of 2507 super duplex stainless steel after multipass friction stir processing (FSP) were examined. A significant refinement in grain size of both ferrite and austenite was observed in stir zone resulting in improved yield and tensile strength. Electrochemical impedance spectroscopy and anodic polarization studies in 3.5 wt.% NaCl solution showed nobler corrosion characteristics with increasing number of FSP passes. This was evident from the decrease in corrosion current density, decrease in passive current density, and increase in polarization resistance. Also, the decrease in density of defects, based on Mott-Schottky analysis, further confirms the improvement in corrosion resistance of 2507 super duplex stainless steel after multipass FSP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. A.R. Akisanya, U. Obi, and N.C. Renton, Effect of Aging on Phase Evolution and Mechanical Properties of a High Tungsten Super-Duplex Stainless Steel, Mater. Sci. Eng. A, 2012, 535, p 281–28910.1016/j.msea.2011.12.087 ↗
2. B. Deng, Y.M. Jiang, J. Gao, and J. Li, Effect of Annealing Treatment on Microstructure Evolution and the Associated Corrosion Behavior of a Super-Duplex Stainless Steel, J. Alloys Compd., 2010, 493, p 461–46410.1016/j.jallcom.2009.12.127 ↗
3. B. Deng, Y. Jiang, J. Gong, C. Zhong, J. Gao, and J. Li, Critical Pitting and Repassivation Temperatures for Duplex Stainless Steel in Chloride Solutions, Electrochim. Acta, 2008, 53, p 5220–522510.1016/j.electacta.2008.02.047 ↗
4. K.D. Ralston, N. Birbilis, and C.H.J. Davies, Revealing the Relationship Between Grain Size and Corrosion Rate of Metals, Scr. Mater., 2010, 63, p 1201–120410.1016/j.scriptamat.2010.08.035 ↗
5. B.P. Kashyap, Enhancement of Flow Properties by Grain Refinement and Other Structural Modification, Procedia Eng., 2014, 86, p 18–2610.1016/j.proeng.2014.11.006 ↗
6. G.M. Xie, Z.Y. Ma, L. Geng, and R.S. Chen, Microstructural Evolution and Mechanical Properties of Friction Stir Welded Mg-Zn-Y-Zr Alloy, Mater. Sci. Eng. A, 2007, 471, p 63–6810.1016/j.msea.2007.03.041 ↗
7. H. Sarlak, M. Atapour, and M. Esmailzadeh, Corrosion Behavior of Friction stir Welded Lean Duplex Stainless Steel, Mater. Des., 2015, 66, p 209–21610.1016/j.matdes.2014.10.060 ↗
8. A.G. Rao, V.A. Katkar, G. Gunasekaran, V.P. Deshmukh, N. Prabhu, and B.P. Kashyap, Effect of Multipass Friction Stir Processing on Corrosion Resistance of Hypereutectic Al-30Si Alloy, Corros. Sci., 2014, 83, p 198–20810.1016/j.corsci.2014.02.013 ↗
9. R.S. Mishra and Z.Y. Ma, Friction Stir Welding and Processing, Mater. Sci. Eng., R, 2005, 50, p 1–7810.1016/j.mser.2005.07.001 ↗
10. A.G. Rao, B.R.K. Rao, V.P. Deshmukh, A.K. Shah, and B.P. Kashyap, Microstructural Refinement of a Cast Hypereutectic Al-30Si Alloy by Friction Stir Processing, Mater. Lett., 2009, 63, p 2628–263010.1016/j.matlet.2009.09.022 ↗
11. S. Mironov, Y.S. Sato, and H. Kokawa, Microstructural Evolution During Friction Stir-Processing of Pure Iron, Acta Mater., 2008, 56, p 2602–261410.1016/j.actamat.2008.01.040 ↗
12. Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and R. Grimes, High Strain Rate Superplasticity in Friction Stir Processed Al-Mg-Zr Alloy, Mater. Sci. Eng. A, 2003, 351, p 148–15310.1016/S0921-5093(02)00824-9 ↗
13. Z.Y. Ma, S.R. Sharma, R.S. Mishra, and M.W. Mahoney, Microstructural Modification of Cast Aluminum Alloys via Friction Stir Processing, Mater. Sci. Forum, 2003, 426–432, p 2891–2896
14. Z.Y. Ma, R.S. Mishra, and M.W. Mahoney, Superplastic Deformation Behaviour of Friction Stir Processed 7075Al Alloy, Acta Mater., 2002, 50, p 4419–443010.1016/S1359-6454(02)00278-1 ↗
15. Y. Li, L.E. Murr, and J.C. McClure, Solid-State Flow Visualization in the Friction-Stir Welding of 2024 Al to 6061 Al, Scr. Mater., 1999, 40, p 1041–104610.1016/S1359-6462(99)00062-7 ↗
16. C.G. Rhodes, M.W. Mahoney, W.H. Bingal, and M. Calabrese, Fine-Grain Evolution in Friction-Stir Processed 7050 Aluminum, Scr. Mater., 2003, 48, p 1451–145510.1016/S1359-6462(03)00082-4 ↗
17. H.G. Salem, A.P. Reynolds, and J.S. Lyons, Microstructure and Retention of Superplasticity of Friction Stir Welded Superplastic 2095 sheet, Scr. Mater., 2002, 46, p 337–34210.1016/S1359-6462(01)01246-5 ↗
18. J.Q. Su, T.W. Nelson, R. Mishra, and M. Mahoney, Microstructural Investigation of Friction Stir Welded 7050-T651 Aluminium, Acta Mater., 2003, 51, p 713–72910.1016/S1359-6454(02)00449-4 ↗
19. I. Charit and R.S. Mishra, High Strain Rate Superplasticity in a Commercial 2024 Al Alloy via Friction Stir Processing, Mater. Sci. Eng., A, 2003, 359, p 290–29610.1016/S0921-5093(03)00367-8 ↗
20. Y.J. Kwon, I. Shigematsu, and N. Saito, Mechanical Properties of Fine-Grained Aluminum Alloy Produced by Friction Stir Process, Scr. Mater., 2003, 49, p 785–78910.1016/S1359-6462(03)00407-X ↗
21. P. Xue, B.L. Xiao, Q. Zhang, and Z.Y. Ma, Achieving Friction Stir Welded Pure Copper Joints with Nearly Equal Strength to the Parent Metal via Additional Rapid Cooling, Scr. Mater., 2011, 64, p 1051–105410.1016/j.scriptamat.2011.02.019 ↗
22. B.W. Ahn, D.H. Choi, D.J. Kim, and S.B. Jung, Microstructures and Properties of Friction Stir Welded 409L Stainless Steel using a Si3N4 Tool, Mater. Sci. Eng., A, 2012, 532, p 476–47910.1016/j.msea.2011.10.109 ↗
23. M. Atapour, H. Sarlak, and M. Esmailzadeh, Pitting Corrosion Susceptibility of Friction Stir Welded Lean Duplex Stainless Steel Joints, Int. J. Adv. Manuf. Technol., 2016, 83, p 721–72810.1007/s00170-015-7601-5 ↗
24. M.B. Bilgin and C. Meran, The Effect of Tool Rotational and Traverse Speed on Friction Stir Weldability of AISI, 430 Ferritic Stainless Steels, Mater. Des., 2012, 33, p 376–38310.1016/j.matdes.2011.04.013 ↗
25. H. Cho, H.N. Han, S. Hong, J. Park, Y. Kwon, S. Kim, and R.J. Steel, Microstructural Analysis of Friction Stir Welded Ferritic Stainless Steel, Mater. Sci. Eng., A, 2011, 528, p 2889–289410.1016/j.msea.2010.12.061 ↗
26. J.D. Escobar, E. Velasquez, T.F.A. Santos, A.J. Ramirez, and D. Lopez, Improvement of Cavitation Erosion Resistance of a Duplex Stainless Steel Through Friction Stir Processing (FSP), Wear, 2013, 297, p 998–100510.1016/j.wear.2012.10.005 ↗
27. M. Esmailzadeh, M. Shamanian, A. Kermanpur, and T. Saeid, Microstructure and Mechanical Properties of Friction Stir Welded Lean Duplex Stainless Steel, Mater. Sci. Eng. A, 2013, 561, p 486–49110.1016/j.msea.2012.10.068 ↗
28. H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata, and K. Nogi, Friction Stir Welding of Carbon Steels, Mater. Sci. Eng., A, 2006, 429, p 50–5710.1016/j.msea.2006.04.118 ↗
29. M. Hajian, A. Abdollah-zadeh, S.S. Rezaei-Nejad, H. Assadi, S.M.M. Hadavi, K. Chung, and M. Shokouhimehr, Microstructure and Mechanical Properties of Friction Stir Processed AISI, 316L Stainless Steel, Mater. Des., 2015, 67, p 82–9410.1016/j.matdes.2014.10.082 ↗
30. J. Han, H. Li, Z. Zhu, F. Barbaro, L. Jiang, H. Xu, and L. Ma, Microstructure and Mechanical Properties of Friction Stir Welded 18Cr-2Mo Ferritic Stainless Steel Thick Plate, Mater. Des., 2014, 63, p 238–24610.1016/j.matdes.2014.05.070 ↗
31. A.K. Lakshminarayanan and V. Balasubramanian, An Assessment of Microstructure, Hardness, Tensile and Impact Strength of Friction Stir Welded Ferritic Stainless Steel Joints, Mater. Des., 2010, 31, p 4592–460010.1016/j.matdes.2010.05.049 ↗
32. S.D. Meshram, G.M. Reddy, and S. Pandey, Friction Stir Welding of Maraging Steel (Grade-250), Mater. Des., 2013, 49, p 58–6410.1016/j.matdes.2013.01.016 ↗
33. T. Saeid, A. Abdollah-zadeh, H. Assadi, and F.M. Ghaini, Effect of Friction Stir Welding Speed on the Microstructure and Mechanical Properties of a Duplex Stainless Steel, Mater. Sci. Eng., A, 2008, 496, p 262–26810.1016/j.msea.2008.05.025 ↗
34. Y.S. Sato, T.W. Nelson, C.J. Sterling, R.J. Steel, and C.O. Pettersson, Microstructure and Mechanical Properties of Friction Stir Welded SAF 2507 Super Duplex Stainless Steel, Mater. Sci. Eng., A, 2005, 397, p 376–38410.1016/j.msea.2005.02.054 ↗
35. D.M. Sekban, O. Saray, S.M. Aktarer, G. Purcek, and Z.Y. Ma, Microstructure, Mechanical Properties and Formability of Friction Stir Processed Interstitial-Free Steel, Mater. Sci. Eng., A, 2015, 642, p 57–6410.1016/j.msea.2015.06.068 ↗
36. M. Magnani, M. Terada, A.O. Lino, V.P. Tallo, E.B. Fonseca, T.F.A. Santos, and A.J. Ramirez, Microstructural and Electrochemical Characterization of Friction Stir Welded Duplex Stainless Steels, Int. J. Electrochem. Sci., 2014, 9, p 2966–297710.1016/S1452-3981(23)07983-X ↗
37. B. Li, Y. Shen, W. Hu, and L. Luo, Surface Modification of Ti-6Al-4V Alloy via Friction-Stir Processing: Microstructure Evolution and Dry Sliding Wear Performance, Surf. Coatings Technol., 2014, 239, p 160–17010.1016/j.surfcoat.2013.11.035 ↗
38. T.F.A. Santos, E.A.T. Lopez, E.B. Fonseca, and A.J. Ramirez, Friction Stir Welding of Duplex and Superduplex Stainless Steels and Some Aspects of Microstructural Characterization and Mechanical Performance, Mater. Res., 2016, 19, p 117–13110.1590/1980-5373-MR-2015-0319 ↗
39. T. Saeid, A. Abdollah-zadeh, T. Shibayanagi, K. Ikeuchi, and H. Assadi, On the Formation of Grain Structure During Friction Stir Welding of Duplex Stainless Steel, Mater. Sci. Eng., A, 2010, 527, p 6484–648810.1016/j.msea.2010.07.011 ↗
40. M.K. Mishra, A.G. Rao, R. Sarkar, B.P. Kashyap, and N. Prabhu, Effect of preaging Deformation on Aging Characteristics of 2507 Super Duplex Stainless Steel, J. Mater. Eng. Perform., 2016, 25, p 374–38110.1007/s11665-015-1840-3 ↗
41. R. Badji, N. Kherrouba, B. Mehdi, B. Cheniti, M. Bouabdallah, C. Kahloun, and B. Bacroix, Precipitation Kinetics and Mechanical Behavior in a Solution Treated and Aged Dual Phase Stainless Steel, Mater. Chem. Phys., 2014, 148, p 664–67210.1016/j.matchemphys.2014.08.032 ↗
42. B. Deng, Z. Wang, Y. Jiang, H. Wang, J. Gao, and J. Li, Evaluation of Localized Corrosion in Duplex Stainless Steel Aged at 850°C with Critical Pitting Temperature Measurement, Electrochim. Acta, 2009, 54, p 2790–279410.1016/j.electacta.2008.11.038 ↗
43. M. Martins and L.R.N. Forti, Effect of Aging on Impact Properties of ASTM A890 Grade 1C Super Duplex Stainless Steel, Mater. Charact., 2008, 59, p 162–16610.1016/j.matchar.2007.02.010 ↗
44. S. Jeon, S. Kim, S. Kim, M. Choi, and Y. Park, Effects of Solution-Annealing Temperature on the Precipitation of Secondary Phases and the Associated Pitting Corrosion Resistance in Hyper Duplex Stainless Steel, Mater. Trans., 2013, 54, p 1473–147910.2320/matertrans.M2012402 ↗
45. T.H. Chen and J.R. Yang, Effects of solution treatment and Continuous Cooling on σ-phase Precipitation in a 2205 Duplex Stainless Steel, Mater. Sci. Eng. A, 2001, 311, p 28–4110.1016/S0921-5093(01)00911-X ↗
46. A. Fattah-alhosseini and S. Vafaeian, Comparison of Electrochemical Behavior Between Coarse-Grained and Fine-Grained AISI, 430 Ferritic Stainless Steel by Mott-Schottky Analysis and EIS Measurements, J. Alloys Compd., 2015, 639, p 301–30710.1016/j.jallcom.2015.03.142 ↗
47. E.C. Souza, S.M. Rossitti, and J.M.D.A. Rollo, Influence Of Chloride Ion Concentration and Temperature on the Electrochemical Properties of Passive Films Formed on a Superduplex Stainless Steel, Mater. Charact., 2010, 61, p 240–24410.1016/j.matchar.2009.12.004 ↗
48. L. Wang, B. Kang, N. Gao, X. Du, L. Jia, and J. Sun, Corrosion Behaviour of Austenitic Stainless Steel as a Function of Methanol Concentration for Direct Methanol Fuel Cell Bipolar Plate, J. Power Sources, 2014, 253, p 332–34110.1016/j.jpowsour.2013.12.043 ↗
49. V.A. Katkar, G. Gunasekaran, A.G. Rao, and P.M. Koli, Effect of the Reinforced Boron Carbide Particulate Content of AA6061 Alloy on Formation of the Passive Film in Seawater, Corros. Sci., 2011, 53, p 2700–271210.1016/j.corsci.2011.04.023 ↗
50. A. Fattah-alhosseini, M.A. Golozar, A. Saatchi, and K. Raeissi, Effect of Solution Concentration on Semiconducting Properties of Passive Films Formed on Austenitic Stainless Steels, Corros. Sci., 2010, 52, p 205–20910.1016/j.corsci.2009.09.003 ↗
51. J. Amri, T. Souier, B. Malki, and B. Baroux, Effect of the Final Annealing of Cold Rolled Stainless Steels Sheets on the Electronic Properties and Pit Nucleation Resistance of Passive Films, Corros. Sci., 2008, 50, p 431–43510.1016/j.corsci.2007.08.013 ↗
52. S. Fujimoto and H. Tsuchiya, Semiconductor Properties and Protective Role of Passive Films of Iron Base Alloys, Corros. Sci., 2007, 49, p 195–20210.1016/j.corsci.2006.05.020 ↗
53. A.M. Schmidt, D.S. Azambuja, and E.M.A. Martini, Semiconductive Properties of Titanium Anodic Oxide Films in McIlvaine Buffer Solution, Corros. Sci., 2006, 48, p 2901–291210.1016/j.corsci.2005.10.013 ↗
54. H. Luo, C.F. Dong, X.Q. Cheng, K. Xiao, and X.G. Li, Electrochemical Behavior of 2205 Duplex Stainless Steel in NaCl Solution with Different Chromate Contents, J. Mater. Eng. Perform., 2012, 21, p 1283–129110.1007/s11665-011-0030-1 ↗
55. S.H.C. Park, Y.S. Sato, H. Kokawa, K. Okamoto, S. Hirano, and M. Inagaki, Microstructural Characterisation of Stir Zone Containing Residual Ferrite in Friction Stir Welded 304 Austenitic Stainless Steel, Sci. Technol. Weld. Join., 2005, 10, p 550–55610.1179/174329305X46691 ↗
56. L. Commin, M. Dumont, J.-E. Masse, and L. Barrallier, Friction Stir Welding of AZ31 Magnesium Alloy Rolled Sheets: Influence of Processing Parameters, Acta Mater., 2009, 57, p 326–33410.1016/j.actamat.2008.09.011 ↗
57. M. Yuqing, K. Liming, L. Fencheng, C. Yuhua, and X. Li, Investigations on Temperature Distribution, Microstructure Evolution, and Property Variations Along Thickness in Friction Stir Welded Joints for Thick AA7075-T6 Plates, Int. J. Adv. Manuf. Technol., 2016, 86, p 141–15410.1007/s00170-015-8182-z ↗
58. S. Xu and X. Deng, A Study of Texture Patterns in Friction Stir Welds, Acta Mater., 2008, 56, p 1326–134110.1016/j.actamat.2007.11.016 ↗
59. X. Li, J.L. Li, Z.X. Liao, F. Jin, F.S. Zhang, and J.T. Xiong, Asymmetric Microstructure and Fracture Behaviour of Friction Stir Welded Joints of 2024 Aluminium Alloy Under Cyclical Load, Sci. Technol. Weld. Join., 2016, 21, p 515–52210.1080/13621718.2016.1177978 ↗
60. A. Momeni, S. Kazemi, and A. Bahrani, Hot Deformation Behavior of Microstructural Constituents in a Duplex Stainless Steel During High-Temperature Straining, Int. J. Miner. Metall. Mater., 2013, 20, p 953–96010.1007/s12613-013-0820-6 ↗
61. L. Duprez, B.C.D. Cooman, and N. Akdut, Flow Stress and Ductility of Duplex Stainless Steel During High-Temperature Torsion Deformation, Metall. Mater. Trans. A, 2002, 33, p 1931–193810.1007/s11661-002-0026-4 ↗
62. K. Migiakis and G.D. Papadimitriou, Effect of Nitrogen and Nickel on the Microstructure and Mechanical Properties of Plasma Welded UNS S32760 Super-Duplex Stainless Steels, J. Mater. Sci., 2009, 44, p 6372–638310.1007/s10853-009-3878-9 ↗
63. C.H. Hsu and F. Mansfeld, Technical Note: Concerning the Conversion of the Constant Phase Element Parameter Y0 into a Capacitance, Corros., 2001, 57, p 747–74810.5006/1.3280607 ↗
64. N. Anselmo, J.E. May, N.A. Mariano, P.A.P. Nascente, and S.E. Kuri, Corrosion Behavior of Supermartensitic Stainless Steel in Aerated and CO2-Saturated Synthetic Seawater, Mater. Sci. Eng. A, 2006, 428, p 73–7910.1016/j.msea.2006.04.107 ↗
65. L. Jinlong and L. Hongyun, Comparison of Corrosion Properties of Passive Films Formed on Phase Reversion Induced Nano/Ultrafine-Grained 321 Stainless Steel, Appl. Surf. Sci., 2013, 280, p 124–13110.1016/j.apsusc.2013.04.108 ↗
66. R.K. Gupta, R.K.S. Raman, and C.C. Koch, Electrochemical Characteristics of Nano and Microcrystalline Fe-Cr Alloys, J. Mater. Sci., 2012, 47, p 6118–612410.1007/s10853-012-6529-5 ↗
67. S. Qian, R.C. Newman, and R.A. Cottis, Validation of a Percolation Model for Passivation of Fe-Cr Alloys: Two-Dimensional Computer Simulations, J. Electrochem. Soc., 1990, 137, p 435–43910.1149/1.2086458 ↗
68. B.O. Elfström, The Effect of Chloride Ions on Passive Layers on Stainless Steels, Mater. Sci. Eng., 1980, 42, p 173–18010.1016/0025-5416(80)90026-9 ↗
69. G.D. Sulka, V. Moshchalkov, G. Borghs, and J.P. Celis, Electrochemical Impedance Spectroscopic Study of Barrier Layer Thinning in Nanostructured Aluminium, J. Appl. Electrochem., 2007, 37, p 789–79710.1007/s10800-007-9312-6 ↗
70. L. Jinlong and L. Hongyun, Comparison of Corrosion Behavior Between Coarse Grained and Nano/Ultrafine Grained 304 Stainless Steel by EWF, XPS and EIS, J. Nucl. Mater., 2014, 452, p 469–47310.1016/j.jnucmat.2014.05.041 ↗
71. B. Zhang, Y. Li, and F. Wang, Observations of Anomalies in the Anodic Behaviour of Microcrystalline Aluminum, Corros. Sci., 2010, 52, p 2612–261510.1016/j.corsci.2010.04.009 ↗